CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A novel architecture of CdS/ZnO nanorods with plasmonic silver (Ag) nanoparticles deposited at the interface of ZnO nanorods and CdS nanocrystallites, was designed as a photoanode for solar hydrogen generation, with photocurrent density achieving 4.7 mA/cm² at 1.6 V (vs. RHE), which is 8 and 1.7 times as high as those of pure ZnO and CdS/ZnO nanorod films, respectively. Additionally, with optical absorption onset extended to ～660 nm, CdS/Ag/ZnO nanorod film exhibits significantly increased incident photo-to-current efficiency (IPCE) in the whole optical absorption region, reaching 23.1% and 9.8% at 400 nm and 500 nm, respectively. The PEC enhancement can be attributed to the one-dimensional ZnO nanorod structure maintained for superior charge transfer, and the extended visible-light absorption of CdS nanocrystallites. Moreover, the incorporated plasmonic Ag nanoparticles could further promote the interfacial charge carrier transfer process and enhance the optical absorption ability, due to its excellent plasmon resonance effect.     

Graphene Oxide/ZnO Nano Composite for Sensitive and Selective Electrochemical Sensing of Levodopa and Tyrosine Using Modified Graphite Screen Printed Electrode

Determination of levodopa and tyrosine as two important species for treatment of Parkinson's disease is described. A novel electrochemical sensor involving graphene oxide/ZnO nanorods (GR/ZnO) nano composite and the graphite screen‐printed electrodes (GSPE) was developed for the simultaneous detection of levodopa and tyrosine. The screen‐printed electrodes with several advantages, including low cost, versatility and miniaturization were employed. On the other hand, the graphene oxide/ZnO nanorods nano composite was casted on the surface of GSPE to obtain GR/ZnO/SPE. The proposed nano sensor has excellent performance such as high sensitivity, good selectivity and analytical application in real samples. The combination of graphene oxide/ZnO nanorods nano composite with the screen‐printed electrode is favorable for amplifying electrochemical signals. Under optimized conditions square wave voltammetry (SWV) exhibited linear dynamic ranges from 1.0×10^?6 to 1.0×10^?3 M and 1.0×10^?6 to 8.0×10^?4 M with detection limits of 4.5×10^?7 M and 3.4×10^?7 M for levodopa and tyrosine respectively.     

Porous Ni@Pt Core‐Shell Nanotube Array Electrocatalyst with High Activity and Stability for Methanol Oxidation

Bimetallic core‐shell nanostructures are emerging as more important materials than monometallic nanostructures, and have much more interesting potential applications in various fields, including catalysis and electronics. In this work, we demonstrate the facile synthesis of core‐shell nanotube array catalysts consisting of Pt thin layers as the shells and Ni nanotubes as the cores. The porous Ni@Pt core‐shell nanotube arrays were fabricated by ZnO nanorod‐array template‐assisted electrodeposition, and they represent a new class of nanostructures with a high electrochemically active surface area of 50.08 m² (g Pt)^?1, which is close to the value of 59.44 m² (g Pt)^?1 for commercial Pt/C catalysts. The porous Ni@Pt core‐shell nanotube arrays also show markedly enhanced electrocatalytic activity and stability for methanol oxidation compared with the commercial Pt/C catalysts. The attractive performances exhibited by these prepared porous Ni@Pt core‐shell nanotube arrays make them promising candidates as future high‐performance catalysts for methanol electrooxidation. The facile method described herein is suitable for large‐scale, low‐cost production, and significantly lowers the Pt loading, and thus, the cost of the catalysts.     

Porphyrin Nanorods Modified Glassy Carbon Electrode for the Electrocatalysis of Dioxygen,Methanol and Hydrazine

Porphyrin nanorods (PNR) were prepared by ionic self‐assembly of two oppositely charged porphyrin molecules consisting of free base meso‐tetraphenylsulfonate porphyrin (H₄TPPS₄^2?) and meso‐tetra(N‐methyl‐4‐pyridyl) porphyrin (MTMePyP⁴⁺M=Sn, Mn, In, Co). These consist of H₄TPPS₄^2?? SnTMePyP⁴⁺, H₄TPPS₄^2?? CoTMePyP⁴⁺, H₄TPPS₄^2?? InTMePyP⁴⁺ and H₄TPPS₄^2?? MnTMePyP⁴⁺ porphyrin nanorods. The absorption spectra and transmission electron microscopic (TEM) images of these structures were obtained. These porphyrin nanostructures were used to modify a glassy carbon electrode for the electrocatalytic reduction of oxygen, and the oxidation of hydrazine and methanol at low pH. The cyclic voltammogram of PNR‐modified GCE in pH 2 buffer solution has five irreversible processes, two distinct reduction processes and three oxidation processes. The porphyrin nanorods modified GCE produce good responses especially towards oxygen reduction at ?0.50 V vs. Ag|AgCl (3 M KCl). The process of electrocatalytic oxidation of methanol using PNR‐modified GCE begins at 0.71 V vs. Ag|AgCl (3 M KCl). The electrochemical oxidation of hydrazine began at around 0.36 V on H₄TPPS₄^2?? SnTMePyP⁴⁺ modified GCE. The GCE modified with H₄TPPS₄^2?? CoTMePyP⁴⁺ H₄TPPS₄^2?? InTMePyP⁴⁺ and H₄TPPS₄^2?? MnTMePyP⁴⁺ porphyrin nanorods began oxidizing hydrazine at 0.54 V, 0.59 V and 0.56 V, respectively.     

ZnO纳米柱状阵列表面AgX等离子基元修饰及其可见光光催化活性

采用浸渍法制备了表面AgX（X=I,Br）等离子基元修饰的ZnO纳米柱状阵列,研究了浸渍浓度和时间以及紫外光光照预处理对ZnO纳米柱状阵列可见光光催化活性的影响.采用场发射扫描电子显微镜、X射线衍射仪、紫外可见漫反射吸收光谱以及X射线光电子能谱仪等手段对ZnO纳米柱状阵列的形貌、相组成、禁带宽度及其表面特性进行了表征.结果显示,AgBr颗粒分布于ZnO纳米柱状阵列的顶端及顶端侧面,同时AgBr颗粒之间相互接触而形成网状结构.通过紫外光光照预处理,AgBr表面出现细小颗粒,形成Ag/AgBr/ZnO纳米复合结构.可见光光催化降解甲基橙结果表明,在相同工艺条件下所制AgBr/ZnO的可见光光催化活性明显优于AgI/ZnO,且与浸渍浓度及时间有关.由于ZnO纳米柱状阵列的比表面积大,AgBr的可见光响应特性以及Ag/AgBr纳米结构的表面等离子效应,经过紫外光光照预处理形成的Ag/AgBr/ZnO纳米复合结构表现出最好的可见光光催化活性.     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A sandwiched structure of CdS/Ag/ZnO nanorod photoanode exhibits greatly enhanced photoelectrochemical activity for solar hydrogen generation, due to synergistic effect of CdS nanocrystallites and plasmonic Ag nanoparticles for the enhanced optical absorption and the promoted charge carrier separation.     

Direct Electrochemistry of Glucose Oxidase at Carbon Nanotube‐gold Colloid Modified Electrode with Poly(diallyldimethylammonium chloride) Coating

Glucose oxidase showed direct electrochemical transfer at glassy carbon electrodes immobilized with carbon nanotube‐gold colloid (CNT‐Au) composites with poly(diallydimethylammonium chloride) (PDDA) coatings. The modified electrode (GC/CNT/Au/PDDA‐GOD) was employed for the amperometric determination of glucose. Under optimal conditions, the biosensor displayed linear response to glucose from 0.5 to 5 mM with a sensitivity of 2.50 mA M^?1 at an applied potential of ?0.3 V (vs. Ag|AgCl reference).     

Electrooxidation of Several Organic Compounds on Simply Prepared Metallic Nanoparticles: A Comparative Study

The electrooxidation of several fuel compounds was studied using metallic nanoparticles of Au, Pd, Pt, AuPd and AuPt synthesized by direct electrodeposition by applying a constant potential of ‐200 mV (vs. Ag/AgCl) to pencil graphite in an acidic medium. Scanning electron microscope (SEM) images and X‐ray diffraction (XRD) data show that monometallic (Au, Pd and Pt) and alloys of bimetallic nanoparticles of AuPd and AuPt have been formed. The catalytic performance of the prepared electrodes was investigated in a neutral medium (100 mM phosphate buffer, pH 7) by cyclic voltammetry. Amongst all fuels, the highest current densities were obtained by the electrooxidation of formic acid (ca. 9.8 mA cm^?2) and formaldehyde (ca. 9.7 mA cm^?2) on the AuPt catalyst.     

Fluorine‐Doped Porous Single‐Crystal Rutile TiO2 Nanorods for Enhancing Photoelectrochemical Water Splitting

Fluorine‐doped hierarchical porous single‐crystal rutile TiO₂ nanorods have been synthesized through a silica template method, in which F^? ions acts as both n‐type dopants and capping agents to make the isotropic growth of the nanorods. The combination of high crystallinity, abundant surface reactive sites, large porosity, and improved electronic conductivity leads to an excellent photoelectrochemical activity. The photoanode made of F‐doped porous single crystals displays a remarkably enhanced solar‐to‐hydrogen conversion efficiency (≈0.35 % at ?0.33 V vs. Ag/AgCl) under 100 mW cm^?2 of AM=1.5 solar simulator illumination that is ten times of the pristine solid TiO₂ single crystals.     

Electrocatalytic and Simultaneous Determination of Ascorbic Acid,Nicotinamide Adenine Dinucleotide and Folic Acid at Ruthenium(II) Complex‐ZnO/CNTs Nanocomposite Modified Carbon Paste Electrode

This paper describes the development a novel ruthenium(II) complex‐ZnO/CNTs modified carbon paste electrode (Ru(II)/ZnO/CNTs/CPE) for the electrocatalytic determination of ascorbic acid (AA). The objective of this novel electrode modification was to seek new electrochemical performances for the detection of AA, nicotinamide adenine dinucleotide (NADH) and folic acid (FA). The peak potentials recorded were 170, 500 and 830 mV vs. Ag/AgCl/KCl_sat for AA, NADH and FA, respectively. The peak currents were linearly dependent on AA, NADH and FA concentrations using square wave voltammetry (SWV) method at the ranges of 0.008–251, 1.0–650, and 3.0–700 µmol L^?1, with detection limits of 0.005, 0.5, and 1.0 µmol L^?1, respectively.     

The Measurement of the Gibbs Energy of Transfer Between Oil and Water Using a Nano‐Carbon Paste Electrode

The use of nano‐carbon paste electrodes for the measurement of Gibbs energies of transfer between oil and aqueous phases is reported. In this method the oil of interest is used as the binder for the nano‐carbon paste electrodes and the molecule of interest is dissolved in the organic or aqueous phase. Voltammetry is performed over a period of time and used to monitor the transfer of the molecule between the two phases. The method is illustrated for the transfer of ferrocenemethanol between water and oil using the ferrocenemethanol / ferroceniummethanol (FcCH₂OH/FcCH₂OH⁺) redox couple. Three pairs of voltammetric peaks were observed in a 0.1 M KCl solution when the nano‐carbon paste electrode was modified by dissolution of FcCH₂OH in the binder oil: P1 [E=0.23 V, 0.17 V vs. Ag/AgCl (1 M KCl)], P2 [E=0.36 V, 0.32 V vs. Ag/AgCl (1 M KCl)] and P3 [E=0.55 V, 0.46 V vs. Ag/AgCl (1 M KCl)]. These are assigned to the FcCH₂OH species existing in the aqueous solution [FcCH₂OH(aq)/FcCH₂OH⁺(aq)], originating in the oil (o) [FcCH₂OH(o)/FcCH₂OH⁺(aq)] and to oxidation of adsorbed (ads) material on the nano‐carbon [FcCH₂OH(ads)] respectively. When supporting electrolyte containing the anions Cl^?, NO₃^? or SCN^? was used, an expulsion of the oxidised ferrocene occurred and the difference in midpoint potentials (E_mid) between the peaks P1 and P2 observed in these experiments allowed the calculation of the Gibbs energy (ΔG°) of transfer of ferrocenemethanol from water to oil. The average ΔG° value thus obtained was (?12.7±0.2) kJ mol^?1. For more hydrophobic anions (X^?=PF₆^?, AsF₆^?), the electron transfer is coupled to the transfer of the anion into the oil and the ΔG° for the transfer of the ion pair of FcCH₂OH⁺ and X^? ions from water to oil was found to be ?1.3 and ?3.9 kJ mol^?1 for PF₆^? and AsF₆^? respectively.     

Electroanalytical Study of Methanol Oxidation and Oxygen Reduction at Carbon Nanohorns‐Pt Nanostructured Electrodes

This work reports a comprehensive electroanalytical study of carbon nanohorns (CNHs) in electrochemical applications. Compared to other types of carbons, the bare CNHs electrode exhibited higher peak current densities and lowest anodic peak‐to‐cathodic peak separation of less than 50 mV for the [Fe(CN)^4?]₆/[Fe(CN)^3?]₆ redox couple. Furthermore, CNHs exhibited excellent electrocatalyst supporting properties for porous Pt film towards methanol oxidation reaction reaching a peak current density of 127 mA cm^?2 or peak current mass activity 184 mA mg_Pt^?1. Regarding oxygen reduction reaction, an onset potential as positive as 0. 77 V vs. Ag/AgCl was achieved with CNHs/porous Pt film.     

Fabrication of urchin‐like Ag/ZnO hierarchical nano/microstructures based on galvanic replacement mechanism and their enhanced photocatalytic properties

Urchin‐like Ag/ZnO hierarchical nano/microstructures have been synthesized through a facile low‐temperature hydrothermal growth method based on galvanic replacement mechanism. The experimental results show that the urchin‐like Ag/ZnO heterostructures are formed through the epitaxial growth of ZnO nanorods on the {111} facets of Ag nanoparticles along their own c‐axis. The photocatalytic properties of the products were evaluated by the degradation of RhB dye solution under ultraviolet irradiation, and the results show that the products exhibit significantly enhanced photocatalytic properties comparing with pure ZnO nanorods. The products with a Ag content of 35.64 atom % prepared with a Ag⁺ concentration in solution of 5 mM exhibit surprisingly high degradation rate (99.5%) for RhB dye solution (4 mg/L) after photocatalytic reaction for only 14 min under ultraviolet irradiation. The Schottky barrier formed at the metal‐semiconductor interfaces improves the segregation of charges and prevents the charge recombination, and thus significantly enhances the photocatalytic activities of the products. On the other hand, the high stability of the urchin‐like Ag/ZnO hierarchical nano/microstructures can effectively prevent the aggregation of nanostructures with simultaneously preserving high photocatalytic properties due to the existence of nanosized unites. Copyright © 2016 John Wiley & Sons, Ltd.     

Photochemical Synthesis and Spectral-Optical Characteristics of ZnO/Cu and ZnO/Ag/Cu Nanoheterostructures

The photoreduction of Cu²⁺ at the surface of ZnO nanoparticles and ZnO/Ag nanostructures was investigated. The spectral characteristics of the obtained ZnO/Cu and ZnO/Ag/Cu composites were studied in relation to the reaction conditions. It was shown that the ZnO/Ag nanoparticles have higher photocatalytic activity in the reduction of Cu²⁺ ions than the individual ZnO particles.     

A Versatile Iron–Tannin‐Framework Ink Coating Strategy to Fabricate Biomass‐Derived Iron Carbide/Fe‐N‐Carbon Catalysts for Efficient Oxygen Reduction

The conversion of biomass into valuable carbon composites as efficient non‐precious metal oxygen‐reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel‐cell technology. Herein, a versatile iron–tannin‐framework ink coating strategy is developed to fabricate cellulose‐derived Fe₃C/Fe‐N‐C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron–tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe₃C/Fe‐N‐C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm^?2 and 32 mA mg^?1 at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.     

Polyaniline‐Modified Silver and Binary Silver‐Cobalt Catalysts for Oxygen Reduction Reaction

Novel dendrite‐like silver particles were electrodeposited on Ti substrates from a supporting electrolyte‐free 30 mmol L^?1 Ag(NH₃)₂⁺ solution, to synthesize the den‐Ag/Ti electrode. Binary Ag_xCo_y/Ti electrodes with different Ag:Co atomic ratios were further obtained by electrodeposition of Co particles on the den‐Ag/Ti electrode. Polyaniline (PANI) modified den‐Ag/Ti and Ag_xCo_y/Ti electrodes, PANI(n)‐den‐Ag/Ti and PANI(n)‐Ag_xCo_y/Ti, were also obtained by cyclic voltammetry at different numbers of cycles (n) in acidic and alkaline solutions containing aniline, respectively. All these electrodes exhibit high electroactivity for oxygen reduction reaction (ORR) in alkaline solution and their electroactivities follow the order: PANI(15)‐Ag₃₁Co₆₉/Ti>Ag₃₁Co₆₉/Ti>PANI(20)‐den‐Ag/Ti>den‐Ag/Ti. Among them, PANI(15)‐Ag₃₁Co₆₉/Ti displays the highest electrocatalytic activity for ORR with a much positive onset potential of 0 V (vs. Ag/AgCl) and a high ORR current density of 1.2 mA cm^?2 at ?0.12 V (vs. Ag/AgCl). The electrocatalysts are electrochemically insensitive to methanol and ethanol oxidation, and, as cathode electrocatalysts of direct alcohol fuel cells, can resist poisoning by the possible alcohol crossover from the anode.     

Determination of Iodide and Idoxuridine at a Glutaraldehyde‐Cross‐Linked Poly‐L‐Lysine Modified Glassy Carbon Electrode

The detection limit (about 0.017 μg mL^?1) for voltammetric determination of iodide (peak at +0.87 V vs. Ag/AgCl at pH 2) at a glutaraldehyde‐cross‐linked poly‐L ‐lysine modified glassy carbon electrode involving oxidation to iodine was found to be several orders of magnitude lower than that for the voltammetric determination on a bare glassy carbon electrode. This method was applied successfully to the determination of iodide in two medicinal formulations. Idoxuridine was determined indirectly at the same electrode by accumulating it first at ?0.8 V vs. Ag/AgCl. At this potential the C? I bond in the adsorbed idoxuridine is reduced giving iodide, which is then determined at the modified electrode. The method was successfully applied to the determination of idoxuridine in a urine sample.     

Controlled Orientation in a Bio‐Inspired Assembly of Ag/AgCl/ZnO Nanostructures Enables Enhancement in Visible‐Light‐Induced Photocatalytic Performance

In a bio‐inspired approach, polyamine‐mediated mineralization of ZnO was explored to develop an environmentally benign methodology for synthesizing Ag/AgCl/ZnO nanostructures. The assembling properties displayed by the polyamines to create composite structures was utilized to have the nanocomponents effectively interact with each other in a way that is desirable for the application envisaged. The polyamines, which act as a mineralizing agent for ZnO nanoparticles, also facilitate the formation of Ag/AgCl within ZnO under ambient conditions. Thus synthesized Ag/AgCl/ZnO nanostructures represent a multi‐heterojunction system in which the nanocomponents lead in a synergistic way to enhancement in the photocatalytic activity under visible‐light irradiation.     

Electroanalytical Determination of N‐Nitrosamines in Aqueous Solution Using a Boron‐Doped Diamond Electrode

The electrochemical methods cyclic and square‐wave voltammetry were applied to develop an electroanalytical procedure for the determination of N‐nitrosamines (N‐nitrosopyrrolidine, N‐nitrosopiperidine and N‐nitrosodiethylamine) in aqueous solutions. Cyclic voltammetry was used to evaluate the electrochemical behaviors of N‐nitrosamines on boron‐doped diamond electrodes. It was observed an irreversible electrooxidation peak located in approximately 1.8 V (vs. Ag/AgCl) for both N‐nitrosamines. The optimal electrochemical response was obtained using the following square‐wave voltammetry parameters: f=250 Hz, E_sw=50 mV and E_s=2 mV using a Britton–Robinson buffer solution as electrolyte (pH 2). The detection and quantification limits determined for total N‐nitrosamines were 6.0×10^?8 and 2.0×10^?7 mol L^?1, respectively.     

Electrocatalysis of Water Oxidation by H2O‐Capped Iridium‐Oxide Nanoparticles Electrodeposited on Spectroscopic Graphite

Electrocatalysis of water oxidation by 1.54 nm IrO_x nanoparticles (NPs) immobilized on spectroscopic graphite electrodes was demonstrated to proceed with a higher efficiency than on all other, hitherto reported, electrode supports. IrO_x NPs were electrodeposited on the graphite surface, and their electrocatalytic activity for water oxidation was correlated with the surface concentrations of different redox states of IrO_x as a function of the deposition time and potential. Under optimal conditions, the overpotential of the reaction was reduced to 0.21 V and the electrocatalytic current density was 43 mA cm^?2 at 1 V versus Ag/AgCl (3 M KCl) and pH 7. These results beneficially compete with previously reported electrocatalytic oxidations of water by IrO_x NPs electrodeposited onto glassy carbon and indium tin oxide electrodes and provide the basis for the further development of efficient IrO_x NP‐based electrocatalysts immobilized on high‐surface‐area carbon electrode materials.