Dinitriles Bearing AIE‐Active Moieties: Synthesis,E/Z Isomerization,and Fluorescence Properties

Dinitriles bearing aggregation‐induced emission (AIE)‐active moieties [tetraphenylethylene (TPE) or diphenylphenanthrene (DPP)] were prepared. Compounds 4 (TPE‐linked) and 8 (DPP‐linked) showed considerably redshifted emission resulting from their large Stokes shifts and also strong fluorescence in the aggregated and solid states. Pure E and Z stereoisomers of both dinitriles were easily separated, and their isomerization equilibria and fluorescence properties were investigated. In addition to their pronounced AIEE behavior, 4 and 8 also showed various reversible chromic responses to external stimuli, namely, solvato‐, piezo‐, vapo‐, and thermochromism, which make them potential candidates for smart materials.     

Theoretical investigations on electronic structures and photophysical properties of novel bridged triphenylamine derivatives

It has been proved that triphenylamine (TPA) derivatives can be excellent candidates for hole‐transporting materials in organic light‐emitting diodes (OLEDs). To improve on the thermal and morphological stability, a fully diarymethylene‐bridged TPA derivative (FATPA) which has been proven to enhance electroluminescent (EL) efficiency was synthesized. On the basis of FATPA, two series of novel bridged TPA derivatives have been designed by using diarylmethylene (Series A) or dimethyfluorene (Series B) as the linkage between the ortho‐positions of the phenyl rings in this work (see Fig. 1 ). To reveal the relationships between electronic structures and photophysical properties of these novel functional materials, an in‐depth theoretical investigation was elaborated via quantum chemical calculations using the density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) methods. In addition, the feasibility of using these bridged TPA derivatives as host in the device of ITO/MoO₃/NPB/mCP/host:Ir(ppy)₃/TAZ/LiF/Al was also evaluated, which including the discussion to their energy levels match with adjacent layers and energy transfer from host to guest. These calculated results show that photophysical properties can be easily tuned by the introduction of various substituent groups into the bridged TPA derivatives, such as the highest occupied molecular orbitals (HOMOs), the lowest unoccupied molecular orbitals (LUMOs), the energies difference between the HOMOs and LUMOs (Δ_H‐L), the lowest singlet (E_S) and triplet (E_T) excitation energies, ionization potentials (IPs), electron affinities (EAs), reorganization energies (λ) and the absorption and emission spectra, indicating that these bridged TPA derivatives have great potential applications for OLEDs. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Structure‐Dependent cis/trans Isomerization of Tetraphenylethene Derivatives: Consequences for Aggregation‐Induced Emission

The isomerization and optical properties of the cis and trans isomers of tetraphenylethene (TPE) derivatives with aggregation‐induced emission (AIEgens) have been sparsely explored. We have now observed the tautomerization‐induced isomerization of a hydroxy‐substituted derivative, TPETH‐OH, under acidic but not under basic conditions. Replacing the proton of the hydroxy group in TPETH‐OH with an alkyl group leads to the formation of TPETH‐MAL, for which the pure cis and trans isomers were obtained and characterized by HPLC analysis and NMR spectroscopy. Importantly, cis‐TPETH‐MAL emits yellow fluorescence in DMSO at ?20 °C whereas trans‐TPETH‐MAL shows red fluorescence under the same conditions. Moreover, the geometry of cis‐ and trans‐TPETH‐MAL remains unchanged when they undergo thiol–ene reactions to form cis‐ and trans‐TPETH‐cRGD, respectively. Collectively, our findings improve our fundamental understanding of the cis/trans isomerization and photophysical properties of TPE derivatives, which will guide further AIEgen design for various applications.     

Synthesis and photophysical properties of N‐styrylazinones

N‐Styrylazinones and 1‐styrylbenzotriazine were synthesized, and their photophysical properties were investigated. (Z)‐ and/or (E)‐N‐Styrylazinones (or azine) 4 were prepared from the corresponding heterocycles 1 and benzaldehyde ( 3 ) by four methods. The absorption maxima of (Z)‐ and/or (E)‐ 4a ‐ 4j were measured in four solvents. Their absorption maxima showed a moderate dependence upon solvents. The absorption maxima of (Z)‐isomers were blue‐shifted as compared the corresponding (E)‐isomers. Emission maxima, fluorescence band half‐widths, 0,0 transition energies, Stokes shifts, and quantum yields of (Z)‐ and/or (E)‐ 4a, 4b, 4d, 4e and 4j were measured in organic solvents. The fluorescence spectra show moderate solvatochroism. The fluorescence properties of N‐styrylheterocycles vary with every heterocycles.     

TPE based aggregation induced emission fluorescent sensors for viscosity of liquid and mechanical properties of hydrogel

Two amphiphilic TPE E/Z isomers with aggregation induced emission(AIE) property have been synthesized and characterized. The logarithmic fluorescent intensity of the two molecules was in positive relationship with logarithmic viscosity of liquid. To note, the Z-TPE isomer exhibited more sensitivity in the viscosity of liquid sensing in comparison with the corresponding E-TPE counterpart(around 1.80 folds).Furthermore, two molecules could be used as fluorescent sensors for mechanical properties(v...     

Efficient enhancement of fluorescence emission via TPE functionalized cationic pillar[5]arene-based host–guest recognition-mediated supramolecular self-assembly

A tetraphenylethene (TPE) functionalized cationic pillar[5]arene (CWP5-TPE) was successfully synthesized, and the intramolecular rotation of the TPE motif was restricted via cationic pillar[5]arene-based host–guest recognition-mediated supramolecular self-assembly in water, resulting in the efficient enhancement of fluorescence emission based on the aggregation induced emission (AIE) mechanism. CWP5-TPE self-assembled into nanoribbons while the host–guest inclusion complex formed into supramolecular amphiphile nanoparticles in water.     

A New Monomer for π‐Conjugated Polymers — Synthesis and Characterization of Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane

Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane ( 6 ), a molecule consisting of two diphenyldithiafulvene units connected by a sulfur bridge, was synthesized by the selective lithiation of (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole ( 7a ) at the endocyclic double bond and by subsequent reaction of the lithiated intermediate with bis(phenylsulfonyl)sulfane. Since this reaction sequence proceeded with retention of configuration, of three possible isomers (E, E, Z, E, and Z, Z) only the Z, Z form was obtained. On the basis of the X‐ray structure analysis and the NMR‐spectroscopic characterization of 6 supplemented by the NMR parameters of (E)‐ and (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole, it was demonstrated that two characteristic ⁵J coupling constants of the proton at the exocyclic double bond indicate the configuration (Z or E) of disubstituted dithiafuvene derivatives.     

New Results in Homoheptalene Chemistry

The thermal reaction of homoazulene (=bicyclo[5.3.1]undeca‐1,3,5,7,9‐pentaene; 2 ) with dimethyl acetylenedicarboxylate (ADM) in 1,2‐dichloroethane (ClCH₂CH₂Cl) results, in contrast to an earlier report [5], in formation of not only dimethyl homoheptalene‐4,5‐dicarboxylate (=bicyclo[5.5.1]trideca‐1,3,5,7,9,11‐hexaene‐4,5‐dicarboxylate; 3 ), but also of a 4 : 1 mixture of 3 and dimethyl homoheptalene‐2,3‐dicarboxylate ( 13 ) in almost quantitative yield (Schemes 1 and 3). The structures of both homoheptalenes have been corroborated by X‐ray crystal‐structure analysis (Fig. 5). The double‐bond‐shifted (DBS) isomers 3 ′ and 13 ′ of 3 and 13 , respectively, could not be detected in their ¹H‐NMR spectra (600 MHz threshold of detection ≥0.5%), in agreement with the AM1‐calculated ΔH values of the four isomeric homoheptalene‐dicarboxylates (cf. Table 4). Vilsmeyer formylation of homoazulene ( 2 ) gave homoazulene‐8‐carbaldehyde ( 14 ) in a yield of 67%, which, on treatment with benzylidene‐(triphenyl)‐λ⁵‐phosphane, gave, in almost quantitative yield, a 1.6 : 1 mixture of (Z)‐ and (E)‐8‐styrylhomoazulene ((Z)‐ 15 and (E)‐ 15 , resp.). Thermal reaction of the latter mixture with ADM in 1,2‐dichloroethane led, in a yield of 42%, to a 5 : 1 mixture of dimethyl (Z)‐ and (E)‐2‐styrylhomoheptalene‐4,5‐dicarboxylate ((Z)‐ 15 and (E)‐ 16 , resp.). Both isomers were separated by column chromatography on silica gel. Again, the DBS isomers of (Z)‐ 16 and (E)‐ 16 , i.e., (Z)‐ 16 ′ and (E)‐ 16 ′, could not be detected in the ¹H‐NMR spectra (600 MHz) of pure (Z)‐ 16 and (E)‐ 16 .     

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

2‐(4′‐Pyridyl‐N‐oxide)‐Substituted Hemithioindigos as Photoresponsive Guests for a Super Aryl‐Extended Calix[4]pyrrole Receptor

We report the synthesis of two 2‐(4′‐pyridyl‐N‐oxide)‐substituted hemithioindigos (HTIs). We probed their photoisomerization by using UV/Vis and ¹H NMR spectroscopy techniques. Light irradiation at λ=450 nm provoked the isomerization of the HTI Z isomer to the E counterpart to a large extent (≈80 % at the photostationary state). ¹H NMR titration experiments revealed the formation of thermodynamically and kinetically stable 1:1 inclusion complexes of the (Z)‐HTI isomers with a super aryl‐extended host (association constant>10⁴ m ^?1). Photoirradiation at λ=450 nm of the inclusion complexes induced the isomerization of the bound HTI N‐oxide to afford the (E)‐HTI?calix[4]pyrrole complex. We determined accurate association constant values for the 1:1 inclusion complexes of the (Z)‐ and (E)‐HTI isomers by using isothermal titration calorimetry experiments. The results showed that the stability constants of the (E)‐HTI complexes were 2.2–2.8‐fold lower than those of the (Z)‐HTI counterparts, which explains the lack of light‐induced release of the former to the bulk solution.     

AIE Fluorescent Gelators with Thermo‐, Mechano‐, and Vapochromic Properties

A series of aggregation‐induced emission (AIE) fluorescent gelators (TPE‐C_n‐Chol) were synthesized by attaching tetraphenylethylene (TPE) to cholesterol through an alkyl chain. The properties of the gel, nano‐/microaggregate, and condensed phases were studied carefully. TPE‐C_n‐Chol molecules form AIE fluorescent gels in acetone and in DMF. Their fluorescence can be reversibly switched between the “on” and “off” states by a gel–sol phase transition upon thermal treatment. The AIE properties of aggregated nano‐/microstructures in acetone/water mixtures with different water fractions were studied by using fluorescence spectrometry and scanning electron microscopy (SEM). In different acetone/water mixtures, the TPE‐C_n‐Chol molecules formed different nano‐/microaggregates, such as rodlike crystallites and spherical nanoparticles that showed different fluorescence colors. Finally, the condensed phase behavior of TPE‐C_n‐Chol was studied by using polarizing microscopy (POM), differential scanning calorimetry (DSC), fluorescence spectrometry, fluorescence optical microscopy, and wide‐angle X ray scattering (WAXS). The clover‐shaped TPE unit introduced into the rodlike cholesterol mesogen inhibits not only the formation of a liquid‐crystal phase but also recrystallization upon cooling from the isotropic liquid phase. Very interestingly, TPE‐C_n‐Chol molecules in the condensed state change their fluorescence color under external stimuli, such as melting, grinding, and solvent fuming. The phase transition is the origin of these thermo‐, mechano‐, and vapochromic properties. These findings offer a simple and interesting platform for the creation of multistimuli‐responsive fluorescent sensors.     

Facile construction of aggregation-induced emission molecular liquids via Piers-Rubinsztajn reaction for green fluorescent ink

Solvent-free luminescent molecular liquids(LMLs), which exhibit nonvolatile fluidic nature and active optoelectronic properties, were widely used. For further development, we introduced siloxane units into AIE molecules, designed and synthesized TPE derivatives with siloxane side chains via facile Piers-Rubinsztajn reaction. The obtained AIE molecular liquids exhibit unique photophysical properties. Compared with the obtained alkyl TPE-solids, siloxane TPE show liquid state, which proves that th...     

Spectroscopic Study of the E/Z Photoisomerization of a New Cyrhetrenyl Acylhydrazone: A Potential Photoswitch and Photosensitizer†

The new cyrhetrenyl acylhydrazone [(CO)₃Re(η⁵‐C₅H₄)‐C(O)‐NH‐N = C(CH₃)‐(2‐C₄H₂S‐5‐NO₂)] ( E‐CyAH ) has been designed, synthesized and fully characterized to study the effect of having a cyrhetrenyl fragment (sensitizer) covalently bonded to an acylhydrazone moiety (switch), on its photophysical and photochemical properties. The crystal structure reveals that E‐CyAH adopts an E‐configuration around the iminic moiety [‐N = C(CH₃)]. The absorption spectrum of E‐CyAH displays two bands at 270 and 380 nm, which are mainly ascribed to π → π* intraligand (IL) and d_π → π* metal‐to‐ligand charge transfer (MLCT) transitions, being consistent with DFT/TD‐DFT calculations. Upon 365 nm irradiation, E‐CyAH photoisomerizes to Z‐CyAH , as evidenced by UV‐Vis and ¹H‐NMR spectral changes, with a quantum yield value Φ_{E‐CyAH →Z‐CyAH} of 0.30. Z‐CyAH undergoes a first‐order thermal back‐isomerization process, with a relatively short half‐life τ_1/2 of 277 min. Consequently, E‐CyAH was quantitatively recovered after 24 h, making it a fully reversible T‐type molecular photoswitch. This remarkable behavior allows us to measure the individual photophysical properties for both isomers. In addition, E‐CyAH and Z‐CyAH efficiently photosensitize the generation of singlet oxygen (O₂ (¹Δ_g)) with good yield (Φ_Δ = 0.342).     

Z‐sinapinic acid: the change of the stereochemistry of cinnamic acids as rational synthesis of a new matrix for carbohydrate MALDI‐MS analysis

Successful application of matrix‐assisted laser desorption/ionization (MALDI) MS started with the introduction of efficient matrices such as cinnamic acid derivatives (i.e. 3,5‐dimethoxy‐4‐hydroxycinnamic acid, SA; α‐cyano‐4‐hydroxycinnamic acid). Since the empirical founding of these matrices, other commercial available cinnamic acids with different nature and location of substituents at benzene ring were attempted. Rational design and synthesis of new cinnamic acids have been recently described too. Because the presence of a rigid double bond in its molecule structure, cinnamic acids can exist as two different geometric isomers, the E‐form and Z‐form. Commercial available cinnamic acids currently used as matrices are the geometric isomers trans or E (E‐cinnamic and trans‐cinnamic acids). As a new rational design of MALDI matrices, Z‐cinnamic acids were synthesized, and their properties as matrices were studied. Their performance was compared with that of the corresponding E‐isomer and classical crystalline matrices (3,5‐dihydroxybenzoic acid; norharmane) in the analysis of neutral/sulfated carbohydrates. Herein, we demonstrate the outstanding performance for Z‐SA. Sulfated oligosaccharides were detected in negative ion mode, and the dissociation of sulfate groups was almost suppressed. Additionally, to better understand the quite different performance of each geometric isomer as matrix, the physical and morphological properties as well as the photochemical stability in solid state were studied. The influence of the E/Z photoisomerization of the matrix during MALDI was evaluated. Finally, molecular modeling (density functional theory study) of the optimized geometry and stereochemistry of E‐cinnamic and Z‐cinnamic acids revealed some factors governing the analyte–matrix interaction. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 4‐Arylisocoumarins (=4‐Aryl‐1H‐2‐benzopyran‐1‐ones) through Acidic Hydrolysis of (Z)‐2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes,Followed by Oxidation

4‐Arylisocoumarins (=4‐aryl‐1H‐2‐benzopyran‐1‐ones) 6 were prepared from 2‐(1‐aryl‐2‐methoxyethenyl)‐1‐bromobenzenes 1 . Successive treatment of these bromo styrenes with BuLi and 1‐formylpiperidine gave a mixture of (E)‐ and (Z)‐2‐(1‐aryl‐2‐methoxyethenyl)benzaldehydes 2 . Hydrolysis of (Z)‐isomers with conc. HBr, followed by pyridinium chlorochromate (PCC) oxidation of the resulting 1H‐2‐benzopyran‐1‐ol derivatives 4 (and 5 ), afforded the desired products.     

Synthesis of Amide and Ester Derivatives of Naphthopyrone Carboxylic Acid

The synthesis of various amide and ester derivatives of naphthopyrone‐2‐carboxylic acid has been carried out by reaction of 1‐naphthol with dimethyl acetylenedicarboxylate, which gave a mixture of E and Z isomers of naphthoxy diester. The diester on hydrolysis with KOH gave corresponding diacid, which was a mixture of E and Z isomers. The E and Z isomers were difficult to separate, which were subjected to cyclization in sulfuric acid to get cyclized naphthopyrone carboxylic acid. This acid is converted into titled compounds.     

Isomerisierung von (all-E)-Cycloviolaxanthin Herstellung und Charakterisierung von (9Z)-und (13Z)-Cycloviolaxanthin

Isomerization of (all-E)-Cycloviolaxanthin. Preparation and Characterization of (9Z)- and (13Z)-Cycloviolaxanthin From (all-E)-cycloviolaxanthin (ex Capsicum annuum), (9Z)- and (13Z)-cycloviolaxanthin were prepared in a highly pure state. The configuration of both isomers was determined by means of UV/VIS, NMR, and CD spectroscopy.     

Mesomorphism,polymerization, and chirality induction in α‐cyanostilbene‐functionalized diacetylene‐assembled films: Photo‐triggered Z/E isomerization

Engineering of molecular stacking arrangement via environmental stimuli is of particular interest in stimuli‐responsive self‐assembling architectures. A novel dual photo‐functionalized diacetylene ((Z)‐CNBE‐DA) molecule was synthesized, in which photo‐responsive cyanostilbene moieties exhibited interesting Z‐E isomerization upon UV light irradiation and could be utilized to modulate mesomorphism, molecular stacking arrangement and resulting polymerization behavior. Rod‐like (Z)‐CNBE‐DA could self‐assemble into well‐defined lamellar structures and the helical polydiacetylene (PDA) chains could be formed upon irradiation with circularly polarized ultraviolet light (CPUL). However, the bent‐shaped (E)‐CNBE‐DA molecules only self‐assembled into irregular loose packing, inhibiting the formation of ordered helical PDA chains upon CPUL irradiation. In this work, we established the links between chemical structures, molecular packing engineering and photophysical properties, which would be of great fundamental value for the rational design of smart soft materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2458–2466     

Synthesis, Characterization, and Photophysical Properties of Materials Obtained by Co-intercalation of Chromophores into Layered Double Hydroxides

A pair of chromophores with donor‐acceptor properties, coumarin‐3‐carboxylic acid (3‐CCA) and 9‐anthracene carboxylic acid (9‐ACA), have been successfully intercalated into the layered double hydroxide (LDH), [Zn_0.66Al_0.34(OH)₂](CO₃)_0.17·0.33H₂O by an ion‐exchange method. The obtained co‐intercalation compounds were characterized by X‐ray diffraction, FTIR spectral, thermogravimetry techniques and chemical composition. The guest molecular sizes and structures were investigated utilizing an ab initio (HF/6‐31G) method by G98w. These anions were steadily arranged between the metal hydroxide layers by their carboxylate functional groups interacting with the layer plane. The photophysical properties of the obtained compounds were studied by UV‐Vis absorption and fluorescence spectroscopy. These results indicate that the confinement of the pair of chromophores, 3‐CCA and 9‐ACA, within the interlayer region of the host is in favor of guest‐host interaction and guest‐guest interaction, and that the pair of chromophores, 3‐CCA and 9‐ACA can give rise to energy transfer processes because of the characteristics of their excited states.