Effects of lysozyme and bovine serum albumin on membrane characteristics of dipalmitoylphosphatidylglycerol liposomes

The effects of adsorption of two kinds of proteins on the membrane characteristics of liposomes were examined at pH 7.4 in terms of adsorption amounts of proteins on liposomes, penetrations of proteins into liposomal bilayer membranes, phase transition temperature, microviscosity and permeability of liposomal bilayer membranes, using positively charged lysozyme (LSZ) and negatively charged bovine serum albumin (BSA) as proteins and negatively charged L-alpha-dipalmitoylphosphatidylglycerol (DPPG) liposomes. The saturated adsorption amount of LSZ was 720 g per mol of liposomal DPPG, while that of BSA was 44 g per mol of liposomal DPPG. The penetration of LSZ into DPPG lipid membranes was greater than that of BSA. The microviscosity in the hydrophobic region of liposomal bilayer membranes increased due to adsorption (penetration) of LSZ or BSA, while the permeability of liposomal bilayer membranes increased. The gel-liquid crystalline phase transition temperature of liposomal bilayer membranes was not affected by adsorption of LSZ or BSA, while the DSC peak area (heat of phase transition) decreased with increasing adsorption amount of LSZ or BSA. It is suggested that boundary DPPG makes no contribution to the phase transition and that boundary DPPG and bulk DPPG are in the phase-separated state, thereby increasing the permeability of liposomal bilayer membranes through adsorption of LSZ or BSA. A possible schematic model for the adsorption of LSZ or BSA on DPPG liposomes was proposed.     

Solubilization of negatively charged DPPC/DPPG liposomes by bile salts

The interactions of the bile salts sodium cholate (NaC) and sodium deoxycholate (NaDC) in 0.1 M NaCl (pH 7.4) with membranes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphatidylglycerol (DPPG) and mixtures of DPPC and DPPG at molar ratios of 3:1 and 1:1 were studied by means of high-sensitivity isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and differential scanning calorimetry (DSC). The partition coefficients and the transfer enthalpies for the incorporation of bile salt molecules into the phospholipid membranes were determined by ITC. The vesicle-to-micelle transition was investigated by ITC, DLS, and DSC. The phase boundaries for the saturation of the vesicles and their complete solubilization established by ITC were in general agreement with DLS data, but systematic differences could be seen due to the difference in detected physical quantities. Electrostatic repulsion effects between the negatively charged bile salt molecules and the negatively charged membrane surfaces are not limiting factors for the vesicle-to-micelle transition. The membrane packing constraints of the phospholipid molecules and the associated spontaneous curvature of the vesicles play the dominant role. DPPG vesicles are transformed by the bile salts into mixed micelles more easily or similarly compared to DPPC vesicles. The saturation of mixed DPPC/DPPG vesicles requires less bile salt, but to induce the solubilization of the liposomes, significantly higher amounts of bile salt are needed compared to the concentrations required for the solubilization of the pure phospholipid systems. The different solubilization behavior of DPPC/DPPG liposomes compared to the pure liposomes could be due to a specific "extraction" of DPPG into the mixed micelles in the coexistence region.     

Hepatitis A Synthetic Peptide VP3(110-121) Miscibility with Dipalmitoylphosphatidylcholine, Dipalmitoylphosphatidylglycerol, and Stearylamine Monolayers

To prepare liposomes containing a synthetic hepatitis A virus antigen (HAV) [VP3(110-121)] as a vaccine, the miscibility of this peptide (with negative net charge) with a neutral lipid [dipalmitoylphosphatidylcholine (DPPC)], a negatively charged lipid [dipalmitoylphosphatidylglycerol (DPPG)], and a positively charged lipid [Stearylamine (SA)] was studied through compression isotherms of monolayers. Mixtures with DPPC and SA showed a low degree of interaction with the peptide, the composition of the monolayer being stable through compression. For DPPG-containing monolayers larger positive deviations from ideality were found, and the peptide was squeezed out from the monolayer at a DPPG/VP3(110-121) mole fraction of 0.8/0.2. All this suggests that besides hydrophobic interactions between the peptide and the lipid, electrostatic forces also play a role; thus it seems that neutral and positively charged lipids would be more suitable for preparing stable liposomes with VP3(110-121). Copyright 2000 Academic Press.     

Effects of incorporation of various amphiphiles into recipient liposome membranes on inter-membrane protein transfer.

To obtain information about the factors governing spontaneous inter-membrane protein transfer, we examined the effects of incorporation of various amphiphilic compounds in dimyristoylphosphatidylcholine (DMPC) liposomes on protein transfer from influenza virus-infected cells to the liposomes, and analyzed the physical properties of these liposome membranes. The incorporation of amphiphilic compounds, negatively charged dicetylphosphate (DCP), dipalmitoylphosphatidylserine (DPPS) or positively charged dimethyldipalmitoylammonium (DMDPA), into DMPC liposomal membranes enhanced protein transfer. The liposomes containing DCP, DPPS or DMDPA were unaffected by osmotic shock caused by external addition of glucose, suggesting a decrease in lipid packing in the liposomal membranes. Furthermore, calorimetric study of these liposomes showed that a phase separation occurred partially in the liposomal membranes. Accordingly, the membranes of DMPC liposomes containing DCP, DPPS and DMDPA should be distorted due to the coexistence of two phases, gel and liquid crystalline, in the membranes. Consequently, the membrane distortion could be responsible for the enhancement effects of the amphiphiles on the inter-membrane protein transfer from influenza virus-infected cells to the liposomes.     

Membrane properties of cationic liposomes composed of dipalmitoylphosphatidylcholine and dipalmityldimethylammonium bromide

Cationic liposomes composed of dipalmitoylphosphatidylcholine (DPPC) and dipalmityldimethylammmonium bromide (DPAB) were prepared by the Bangham method and the effect of DPAB on the membrane properties was examined in terms of liposomal shape, particle size, trapping efficiency, surface potential and dispersibility. The dispersibility of the mixed DPPC/DPAB liposomes (the mole fraction of DPAB (X_DPAB)  0.05) was excellent and the dispersibility was maintained for 6 months, since the zeta-potential of the mixed liposomes was approximately +40 mV. The trapping efficiency of the mixed DPPC/DPAB liposomes (X_DPAB = 0.05) was 10 times greater than that of the DPPC liposomes, and the value was largest among the mixed liposomes (X_DPAB = 0–1.0). Freeze-fracture electron micrographs indicated that the shape of the mixed DPPC/DPAB liposomes (X_DPAB = 0.05) was that of large unilamellar vesicles (LUVs) with a diameter of approximately 2 μm, while the shape of the DPPC liposomes was that of multilamellar vesicles (MLVs). The mixed liposomes had, therefore, a high trapping efficiency. Furthermore, the shape of the mixed DPPC/DPAB liposomes (X_DPAB = 0.75) was also that of LUVs with a diameter of approximately 2 μm and these had a high trapping efficiency. Whereas, the particle size (500 nm) of the mixed DPPC/DPAB liposomes (X_DPAB = 0.25) was smaller than that of the former and had the minimum trapping efficiency. The phase transition temperature of the liposomal bilayer membranes indicated a maximum value at 0.25–0.30 mole fractions of DPAB. These facts were considered to be due to the fact that DPPC and DPAB, whose molar ratio was 7.5:2.5, were tightly packed in the liposomal bilayer membranes and that the curvature of the liposomal particle was resultantly large. Nevertheless, LUVs having a high trapping efficiency were easily obtained by mixing a small amount of DPAB with the DPPC.     

Molecular interactions between phospholipids and mangostin in a lipid bilayer

Molecular interactions between phospholipids and mangostin in a lipid bilayer have been investigated in terms of the maximum additive concentration (MAC) of mangostin in liposomes, the surface potential, particle size, microscopic-viscosity and microscopic-polarity of liposomes, and the permeability of glucose. The mangostin used is a natural product extract: 1,3,6-trihydroxy-7-methoxy-2,8-bis(3-methyl-2-butenyl)-9-xanthenenone.

The MAC of mangostin was fairly dependent upon the nature of the liposomes (uncharged, negatively charged or positively charged). Solubilization of mangostin in the liposomal bilayer resulted in both an increase in the negative charge on the liposomal surface, strenghthening the state of the bilayer membrane, and a depression in the release of the glucose involved. Mangostin was found to temporarily stabilize the liposomal bilayer, although the bilayer membrane is still unstable in the long run.     

Preparation of liposomes containing Ceramide 3 and their membrane characteristics

Liposomes composed of Ceramide 3, [2S,3S,4R-2-stearoylamide-1,3,4-octadecanetriol], and L-alpha-dipalmitoylphosphatidylcholine (DPPC) were prepared by varying the amount of Ceramide 3, and the effects of Ceramide 3 on the liposome formation, particle size, dispersibility, microviscosity and phase transition temperature were examined by means of a microscopy, a dynamic light scattering method, a fluorescence polarization method, a differential scanning calorimetry (DSC) and so on. All the DPPC was able to contribute to the formation of liposomes up to 0.130 mol fraction of Ceramide 3. The particle size of liposomes was almost unaffected by the addition of Ceramide 3. The dispersibility of liposomes containing Ceramide 3 was maintained for at least 15 days. The microviscosity of liposomal bilayer membranes in the liquid crystalline state was increased with increasing the mole fraction of Ceramide 3, while that in the gel state was independent of the mole fraction of Ceramide 3. The phase transition temperature from gel to liquid crystalline states of DPPC bilayer membranes was shifted upwards with the addition of Ceramide 3, indicating a cooperative interaction between DPPC and Ceramide 3 molecules. However, a sharp DSC peak became broad and split at higher mole fractions of Ceramide 3, suggesting a phase separation in the mixed DPPC/Ceramide 3 liposomal bilayer membranes. These phenomena were suggested to be related to the previously observed fact for the mixed DPPC/Ceramide 3 monolayers that Ceramide 3 interacts with DPPC in the liquid-expanded phase with consequent phase separation accompanied with domain formation.     

Effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the permeability of liposomal bilayer membranes

The effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the membrane characteristics of liposomes were investigated by differential scanning calorimetry (DSC), freeze-fracture electron microscopy (FFEM), fluorescence polarization measurement and permeability measurement using carboxyfluorescein (CF). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamines with covalently attached PEG molecular weights of 1000, 2000, 3000 and 5000 (DSPE-PEG). DSC and FFEM results showed that the addition of DSPE-PEG to DPPC in the preparation of liposomes caused the lateral phase separation both in the gel and liquid-crystalline states. The fluidity in the hydrocarbon region of liposomal bilayer membranes was not significantly changed by the addition of DSPE-PEG, while that in the interfacial region was markedly increased. From these results, it was anticipated that the CF leakage from PEG-liposomes is accelerated compared with DPPC liposomes. However, CF leakage from liposomes containing DSPE-PEG with a 0.060 mol fraction was depressed compared with regular liposomes, and the leakage decreased with increasing PEG chain length. Furthermore, the CF leakage from liposomes containing DSPE-PEG with a 0.145 mol fraction was slightly increased compared with that of liposomes containing DSPE-PEG with a 0.060 mol fraction. It is suggested that the solute permeability from the PEG-liposomes was affected by not only properties of the liposomal bilayer membranes such as phase transition temperature, phase separation and membrane fluidity, but also the PEG chain of the liposomal surface.     

Alteration in the temperature-dependent content release property of thermosensitive liposomes in plasma

The effect of plasma components on the temperature-dependent content release property of thermosensitive liposomes has been described. Temperature-sensitive liposomes containing mitomycin C (MMC) were prepared from dipalmitoylphosphatidylcholine (DPPC liposomes) and a 7 : 3 mixture of DPPC and dipalmitoylophosphatidylglycerol (DPPC/DPPG liposomes). We defined in this study the difference in the content release between 38 degrees C and 44 degrees C as an index of the temperature-dependent content release efficiency (Delta% release). In the absence of rat plasma, the Delta% release of the DPPC liposomes and the DPPC/DPPG liposomes was 83% and 71%, respectively. However, when the release study was conducted with rat plasma, the Delta% release increased to about 96% for both liposomes. In addition, while the DPPC liposomes were destabilized by rat plasma below the gel-to-liquid crystalline phase transition temperature (T(m)), MMC leakage from the DPPC/DPPG liposomes below T(m) was suppressed by rat plasma. Moreover, the plasma protein binding onto lipid bilayer was concomitant with the gel-to-liquid crystalline phase transition and then enhanced the temperature-dependent release from the DPPC/DPPG liposomes. The possible mechanism of interaction between liposomes and plasma proteins, especially serum albumin, was discussed based on differential scanning calorimetry and protein binding experiments.     

Effect of the phase state of the lipid bilayer on the structure and characteristics of the polycation-(anionic liposome) complex

Interaction of the cationic polymer poly-N-ethyl-4-vinylpyridinium bromide with bilayer vesicles (liposomes) composed of zwitterionic dipalmitoylphosphatidylcholine and anionic cardiolipin (the molar fraction of the negatively charged cardiolipin groups is 0.2) is studied. The composition and characteristics of the polycation-liposome complex are shown to be controlled by the phase state of the lipid membrane. Liposomes whose membranes exist in their LC state (“liquid” liposomes) keep their integrity in the complex with polycation. The adsorbed polycation can be completely removed from the liposomal membrane by the addition excess amounts of a competing polyanion. The adsorption of polycation on the surface of liposomes whose membranes exist the gel state (“solid” liposomes) leads to the formation of defects in the membrane, and the polycation’s adsorption with such liposomes becomes irreversible. The defects that form are also preserved when solid liposomes on whose surface the polycation is sorbed are transformed into the liquid state. Moreover, the reversible contact between polycation and liquid liposomes becomes irreversible once the liposomal membranes bound to the polycation transform into the solid state.     

Glucuronate-modified liposomes with prolonged circulation time

For the purpose of obtaining liposomes with long circulation time in blood, we synthesized 1-O-palmityl-D-glucuronic acid (PGlcUA) and incorporated it into the liposomal membranes. The clearance of the PGlcUA-liposomes composed of dipalmitoylphosphatidylcholine (DPPC), cholesterol, and PGlcUA (40:40:20 as a molar ratio) from blood and their tissue distribution were compared with those of dipalmitoylphosphatidylglycerol (DPPG)-liposomes (DPPC/cholesterol/DPPG = 40:40:20). When [3H]inulin-loaded PGlcUA-liposomes and DPPG-liposomes were intravenously injected into rats, the half-life of the PGlcUA-liposomes in the blood appeared to be 1.7-fold longer than that of DPPG-liposomes. Radioactivities present in plasma and various tissues were measured 22 h after administration of these liposomes, and radioactivity remaining in the plasma was 2.5-fold greater when PGlcUA-liposomes were injected. The distribution pattern of [3H]inulin in PGlcUA-liposomes was similar to that in DPPG-liposomes. The radioactivity recovered in urine was 25% lower in rats treated with PGlcUA-liposomes than in those treated with DPPG-liposomes. Since both PGlcUA- and DPPG-liposomes exhibited similar size distribution and zeta-potential, glucuronic acid, rather than negative charge, on the liposomal surface appears to endow liposomes with a longer circulation time in the bloodstream.     

Intracellular distribution of fluorescent probes delivered by vesicles of different lipidic composition

In order to study mechanisms involved in liposome–cell interaction, this work attempted to assess the influence of vesicle composition on the delivery of liposomal content to Hela cells. In particular, to evaluate pH-sensitive properties and cell interaction of the prepared liposomes, the lipid formulations contained cholesterol (Chol) and they were varied by using phosphatidylcholines with different purity degree: soy lecithin (SL; 80% phosphatidylcholine), a commercial mixture of soy phosphatidylcholine (P90; 90% phosphatidylcholine) or dipalmitoylphosphatidylcholine (DPPC; 99% of purity). A second series of liposomes also contained stearylamine (SA). Dehydration-rehydration vesicles (DRV) were prepared and then sonicated to decrease vesicle size. Vesicle–cell interactions and liposomal uptake were examined by fluorescence microscopy using carboxyfluorescein (CF) and phosphatidylethanolamine-dioleoyl-sulforhodamine B (Rho-PE) as fluorescent markers. Fluorescence dequenching assay was used to study the influence of pH on CF release from the liposomal formulations. Liposome adhesion on the cell surface and internalization were strongly dependent on vesicle bilayer composition. SA vesicles were not endocytosed. DPPC/Chol liposomes were endocytosed but did not release their fluorescent content into the cytosol. SL/Chol and P90/Chol formulations displayed a diffuse cytoplasmic fluorescence of liposomal marker.     

Methotrexate interaction with a lipid membrane model of DPPC

Dipalmitoylphosphatidylcholine (DPPC) liposomes were employed as membrane models for the investigation of the interaction occurring between methotrexate (MTX) and bilayer lipid matrix. Liposomes were obtained by hydrating a lipid film with 50 mM Tris buffer (pH 7.4). The differential scanning calorimetry (DSC) evaluation of the thermotropic parameters associated with the phase transitions of DPPC liposomes gave useful information about the kind of drug-membrane interaction. The results showed an electrostatic interaction taking place with the negatively charged molecules of MTX and the phosphorylcholine head groups, constituting the outer part of DPPC bilayers. No interaction with the hydrophobic phospholipid bilayer domains was detected, revealing a poor capability of MTX to cross through lipid membranes to reach the interior compartment of a lipid bounded structure. These findings correlate well within vitro biological experiments on MTX cell susceptibility.     

The enhancement of immunosuppressive effects of cyclosporine A on human T-cells using fusogenic liposomes

The aim of this study was to prepare and characterize neutral, positively charged, negatively charged and fusogenic liposomes of different sizes that contain cyclosporine A (CyA) and to evaluate their immunosuppressive activity on human T-cells. Neutral liposomes containing CyA were prepared from dipalmitoylphosphatidylcholine (DPPC) and cholesterol using the solvent evaporation method. To prepare positively charged, negatively charged and fusogenic liposomes containing CyA; stearylamine (SA), dicetylphosphate (DCP) and dioleoylphosphatidylethanolamine (DOPE) were added to the neutral liposome formulation, respectively. To reduce the size of liposomes containing CyA, extrusion through polycarbonate filters (1000, 400 and 100 nm) was used. The liposomes were characterized by their size, zeta potential and encapsulation efficiency. The in vitro immunosuppressive effects of an aqueous solution of CyA and different liposomes containing CyA were determined on human T-cells by the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay. The mean diameter of the various multilamellar vesicle (MLV) liposomes containing CyA was between 1.76 and 2.49 μm. The encapsulation efficiency for the different MLV and extruded liposomes containing CyA ranged from 73% to 90%. In vitro immunosuppressive evaluation by T-cell culture showed that fusogenic liposomes have the best inhibitory effects on T-cell proliferation compared to the other liposomes. Reducing the size of the liposomes did not affect the in vitro immunosuppressive activity. The average IC₅₀ for the aqueous solution of CyA and the neutral, positively charged, negatively charged and fusogenic liposomes containing CyA was 4.98 × 10⁻², 7.38, 1.43, 3.84 × 10⁻³ and 7.93 × 10⁻⁵ mM, respectively. The results of this study indicate that fusogenic liposomes have the strongest immunosuppressive activity and could be considered as a suitable delivery system for CyA.     

Destabilisation of liposomes by bovine serum albumin; Sepharose 2B-Cl experiment

Summary The stability of liposomes (2∶1 egg yolk lecithin:cholesterol, mole ratio; diameter about 100 nm) at increasing bovine serum albumin (BSA) concentration was study. The influence of introducing positive or negative charge to the liposomal bilayers was tested. The results indicated appreciable destructive effects of serum albumin on the liposomal membranes of neutral and negatively charged liposomes. Near-physiological concentration (30 mg mL⁻¹) of albumin dissolved more then 50% of liposomes. Presented at the 21^st ISC held in Stuttgart, Germany, 15th–20th September, 1996     

Characterisation of electroosmotic flow in capillary electrochromatography columns

Immobilized liposome chromatography (ILC) has been proven to be a useful method for the study or rapid screening of drug-membrane interactions. To obtain an adequate liposomal membrane phase for ILC, unilamellar liposomes were immobilized in gel beads by avidin-biotin binding. The retardation of 15 basic drugs on the liposome column could be converted to membrane partitioning coefficients, K(LM). The effects of small or large unilamellar liposomes and multilamellar liposomes on the drug-membrane partitioning were compared. The K(LM) values for both small and large liposomes were similar, but higher than those for the multilamellar liposomes. The basic drugs showed stronger partitioning into negatively charged liposomes than into either neutral liposomes or positively charged liposomes. The membrane fluidity of the immobilized liposomes was modulated by incorporating cholesterol into the liposomal membranes, by changing the acyl chain length and degree of unsaturation of the phospholipids, and by changing the temperature for ILC runs. Our data show that K(LM) obtained using ILC correlated well with those reported by batch studies using free liposomes. It is concluded that negatively charged or cholesterol-containing large unilamellar liposomes are suitable models for the ILC analysis of drug-membrane interactions.     

Membrane orientation of MSI-78 measured by sum frequency generation vibrational spectroscopy

Antimicrobial peptides (AMPs) selectively disrupt bacterial cell membranes to kill bacteria whereas they either do not or weakly interact with mammalian cells. The orientations of AMPs in lipid bilayers mimicking bacterial and mammalian cell membranes are related to their antimicrobial activity and selectivity. To understand the role of AMP-lipid interactions in the functional properties of AMPs better, we determined the membrane orientation of an AMP (MSI-78 or pexiganan) in various model membranes using sum frequency generation (SFG) vibrational spectroscopy. A solid-supported single 1,2-dipalmitoyl-an-glycero-3-[phospho-rac-(1-glycerol)] (DPPG) bilayer or 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) bilayer was used as a model bacterial cell membrane. A supported 1,2-dipalmitoyl-an-glycero-3-phosphocholine (DPPC) bilayer or a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayer was used as a model mammalian cell membrane. Our SFG results indicate that the helical MSI-78 molecules are associated with the bilayer surface with ～70° deviation from the bilayer normal in the negatively charged gel-phase DPPG bilayer at 400 nM peptide concentration. However, when the concentration was increased to 600 nM, MSI-78 molecules changed their orientation to make a 25° tilt from the lipid bilayer normal whereas multiple orientations were observed for an even higher peptide concentration in agreement with toroidal-type pore formation as reported in a previous solid-state NMR study. In contrary, no interaction between MSI-78 and a zwitterionic DPPC bilayer was observed even at a much higher peptide concentration (～12,000 nM). These results demonstrate that SFG can provide insights into the antibacterial activity and selectivity of MSI-78. Interestingly, the peptide exhibits a concentration-dependent membrane orientation in the lamellar-phase POPG bilayer and was also found to induce toroidal-type pore formation. The deduced lipid flip-flop from SFG signals observed from lipids also supports MSI-78-induced toroidal-type pore formation.     

Membrane interactions of ternary phospholipid/cholesterol bilayers and encapsulation efficiencies of a RIP II protein

Membrane interactions of liposomes of ternary phospholipid/cholesterol bilayers are investigated. These interactions lead to discoidal deformations and regular aggregations and are strongly enhanced by the presence of mistletoe lectin (ML), a RIP II type protein. The encapsulation of ML into liposomal nanocapsules is studied with a systematic variation of the lipid composition to monitor its effect on the physical properties: entrapment, mean size, morphology, and stability. Extrusion of multilamellar vesicles through filters 80 nm pore size was used for the generation of liposomes. The mean sizes of liposomes ranged between 120 and 200 nm in diameter with narrow size distributions. The increase in flow rate with pressure for three dioleoylphosphatidylcholine (DOPC)/cholesterol (Chol)/dipalmitoylphosphatidylcholine (DPPC) lipid mixtures was linear and allowed to extrapolate to the minimum burst pressure of the liposomal bilayers. From the minimum pressures P(min), the bilayer lysis tensions gamma(l) were determined. The increase in P(min) and gamma(l) with an increasing content of a saturated phosopholipid (DPPC) indicates that DPPC increases the mechanical strength of lipid bilayers. Apparently, DPPC, like cholesterol, leads to a less compressible surface and a more cohesive membrane. After preparation, vesicle solutions were purified by gel permeation chromatography to separate encapsulated ML from free ML in the extravesicular solution. Purified liposomes were then characterized. The content of entrapped and adsorbed ML was measured using ELISA. Repetitive freezing/thawing cycles prior to extrusion significantly increased ML uptake. On the contrary, adsorption was not affected neither by lipid composition, nor concentration and preparation. Differences in experimental encapsulation efficiency only reflect the differences in the mean vesicle sizes of the different samples as is revealed by a comparison to a theoretical estimate. Cryo-transmission electron microscopy (Cryo-TEM) images show that beside spherical, single-walled liposomes, there is a considerable fraction of discoidally deformed vesicles. Based on our results and those found in the literature, we speculate that the flattening of the vesicles is a consequence of lipid phase separation and the formation of condensed complexes and areas of different bending elasticities. This phenomenon eventually leads to agglomeration of deformed liposomal structures, becoming more pronounced with the increase in the relative amount of saturated fatty acids, presumably caused by hydrophobic interaction. For the same lipid mixture aggregation correlated linearly with the ML content. Finally, tested liposomal samples were kept at 4 degrees C to examine their stability. Only slight fluctuations in diameter and the increase in polydispersity after 3 weeks of storage occurred, with no statistically significant evidence of drug leakage during a time period of 12 days, illustrating physical stability of liposomes.     

Stabilization of Liposomes by Polyelectrolytes: Mechanism of Interaction and Role of Experimental Conditions

ζ-potential measurements on LUVs allow to evidence the influence of pH, ionic salt concentration, and polyelectrolyte charge on the interaction between polyelectrolyte (chitosan and hyaluronan) and zwitterionic lipid membrane. First, chitosan adsorption is studied: adsorption is independent on the chitosan molecular weight and corresponds to a maximum degree of decoration of 40% in surface coverage. From the dependence with pH and independence with MW, it is concluded that electrostatic interactions are responsible of chitosan adsorption which occurs flat on the external surface of the liposomes. The vesicles become positively charged in the presence of around two repeat units of chitosan added per lipid accessible polar head in acid medium down to pH = 7.2. Direct optical microscopy observations of GUVs shows a stabilization of the composite liposomes under different external stresses (pH and salt shocks) which confirms the strong electrostatic interaction between the chitosan and the lipid membrane. It is also demonstrated that the liposomes are stabilized by chitosan adsorption in a very wide range of pH (2.0 < pH < 12.0). Then, hyaluronan (HA), a negatively charged polyelectrolyte, is added to vesicles; the vesicles turn rapidly negatively charged in presence of adsorbed HA Finally, we demonstrated that hyaluronan adsorbs on positively charged chitosan-decorated liposomes at pH < 7.0 leading to charge inversion in the liposome decorated by the chitosan-hyaluronan bilayer. Our results demonstrate the adsorption of positive and/or negative polyelectrolyte at the surface of lipidic vesicles as well as their role on vesicle stabilization and charge control.     

New protocols for preparing dipalmitoylphosphatidylcholine dispersions and controlling surface tension and competitive adsorption with albumin at the air/aqueous interface

The adsorption behavior of dipalmitoylphosphatidylcholine (DPPC), which is the major component of lung surfactant, at the air/aqueous interface and the competitive adsorption with bovine serum albumin (BSA) were studied with tensiometry, infrared reflection absorption spectroscopy (IRRAS), and ellipsometry. Dynamic surface tensions lower than 1 mN/m were observed for DPPC dispersions, with mostly vesicles, prepared with new protocols, involving extensive sonication above 50 °C. The lipid adsorbs faster and more extensively for DPPC dispersions with vesicles than with liposomes. For DPPC dispersions by a certain preparation procedure at T > T_c, when lipid particles were observed on the surface, dynamic surface tensions as low as 1 mN/m were measured. Moreover, IRRAS intensities and ellipsometric δΔ values were found to be much higher than the values for other DPPC dispersions or spread DPPC monolayers, suggesting that a larger amount of liposomes or vesicles adsorb on the surface. For DPPC/BSA mixtures, the tension behavior is controlled primarily by BSA, which prevents the formation of a dense DPPC monolayer. When BSA is injected into the subphase with a spread DPPC monolayer or into a DPPC dispersion with preadsorbed layers, little or no BSA adsorbs and the DPPC layer remains on the surface. When a DPPC monolayer is spread on a BSA solution at 0.1 wt% at 25 °C, then DPPC lipid can displace the adsorbed BSA molecules. The lack of BSA adsorption, and the expulsion of BSA by DPPC monolayer is probably due to the strong hydrophilicity of the lipid polar headgroup. When a DPPC dispersion is introduced with Trurnit's method or when dispersion drops are sprayed onto the surface of a DPPC/BSA mixture, the surface tension becomes lower and is controlled by DPPC, which can prevent the adsorption of BSA. The results may be important in understanding inhibition of lung surfactants by serum proteins and in designing efficient protocols of surfactant preparation and administration.