A new neutron activation technique for simultaneous determination of inorganic and total mercury contents in human hair

A simple method for simultaneous determination of inorganic and total mercury contents in human hair by neutron activation analysis (NAA) has been developed. The method is based on the selective extraction of methylmercury from hair by hydrochloric acid. Thus, the residual phase containing inorganic mercury can be determined by NAA. Further, the methylmercury contents in hair samples are easily calculated by subtracting the inorganic mercury contribution from the total Hg simultaneously given by INAA. Several reference materials of human hair, including IAEA hair RM 085 and 086, Chinese hair RMs GBW 09101 and 07601, were analyzed by this method. Our results show that the method is reliable.     

Determination of methylmercury in human hair by ethylation followed by headspace solid-phase microextraction-gas chromatography-cold-vapour atomic fluorescence spectrometry

An analytical procedure for the determination of methylmercury in human hair after acid digestion using aqueous ethylation, headspace solid-phase microextraction sampling and final gas chromatography-cold-vapour atomic fluorescence spectrometry detection is described. Acid digestion, extraction procedure and chromatographic conditions were optimised. An optimal linear range using standard mercury solutions was found and concentration detection limits for the mercury species, MeHg and Hg2+, were about 50 and 80 ng/g, respectively, for 100 mg of human hair. The reproducibility of the developed analytical procedure assessed for hair samples with incurred MeHg was better than 18% (n=5). A certified reference material from the National Institute of Environmental Studies (Japan) was used for validation. Analysis of human hair collected from urban inhabitants was performed and the mean value of methylmercury content in hair samples was 0.764 +/- 0.732 microg/g for the population tested. The developed analytical method is simple, fast and a suitable procedure for the monitoring and screening of human exposure to methylmercury.     

Contents of arsenic, mercury and other trace elements in Napoleon's hair determined by INAA using the k0-method

Two samples of Napoleon's hair were received for determination of arsenic, mercury and other trace elements by INAA. Before sample irradiation, the hairs were washed following the IAEA washing procedure. Two standard reference materials of GBW09101 (human hair) and NIST/SRM1572 (citrus leaves) were analyzed along with Napoleon's hair for quality control. Standardization was conducted by applying the k ₀-method implemented in the program MULTINAA. The contents of arsenic and mercury as well as three additional elements chromium, antimony and zinc in Napoleon's hair are reported. Compared to the present normal levels, all of the determined elements in Napoleon's hair, except the mercury, are found to be irregular.     

An international interlaboratory study for the production of a sewage sludge certified reference material for routine use in inorganic quality control

Two existing interlaboratory schemes are used to certify a sewage sludge reference material. Data from the analysis (As, Cd, Cr, Cu, Pb, Hg, Ni and Zn) of the material using routine procedures, US EPA and Netherlands NEN, plus INAA and IDMS and an interlaboratory comparison in Eastern Europe have been examined. The Dutch results show significantly lower analytical results for As for the graphite furnace technique compared to HG-AAS, probably due to matrix-effects. The differences between the Dutch and USA results for Cr and Ni suggest that the USEPA 3050A digestion method for dissolution of the metals is less aggressive for this material compared to aqua regia destruction. For international comparability of analytical data it is essential to harmonize method dependent dissolution/extraction techniques. The preparation of reference materials which mimic real samples and certification by ILS result in useful materials for quality control.     

Ionic liquids based single drop microextraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry for determination of Co,Hg and Pb in biological and environmental samples

A new method of ionic liquids based cycle flow single drop microextraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) was proposed for the determination of trace Co, Hg and Pb with 1-(2-pyridylazo)-2-naphthol (PAN) as both extractant and chemical modifier and 1-butyl-3-methylimidazolium hexafluorophosphate as the extraction solvent. Several factors that influence the microextraction efficiency, such as sample pH, sample flow rate, microdrop volume and extraction time, were investigated and the optimized microextraction conditions were established. Co, Hg and Pb in the post-extraction ionic liquids phase were directly determined by ETV-ICP-MS with the use of PAN as chemical modifier. The chemical modification of PAN in ETV-ICP-MS was studied and the factors affecting the vaporization behaviors of target analytes were investigated. Under the optimized conditions, the detection limits of the method were 1.5, 9.8 and 6.7 pg/mL for Co, Hg and Pb, with the relative standard deviations for 0.5 ng/mL (n = 7) of Co, Hg and Pb were 7.7%, 5.2% and 12.0%, respectively. After 10 min of extraction, the enrichment factors were 350 (Co), 50 (Hg) and 60 (Pb). The proposed method was successfully applied to the determination of trace Co, Hg and Pb in human serum and environmental water samples. In order to validate the developed method, a certified reference material of human hair (GBW07601) was analyzed and the determined values were in good agreement with the certified values.     

Quality Control in Element Analysis of Plant Materials

A worldwide laboratory intercomparison was organized by the International Atomic Energy Agency's Analytical Quality Control Services (AQCS) involving the determination of elements in plant materials used for human consumption. The main purpose of this work was to evaluate the performance of our analytical methods including sample preparation and to obtain new reference materials that can be used in our further work. Both materials (spinach and cabbage) were analyzed by inductively coupled plasma atomic emission spectrometry (ICP-AES) and instrumental neutron activation analysis (INAA). Six subsamples of each material were subjected to our digestion procedure and the solutions were measured by ICP-AES. The dried samples were analyzed using INAA. Up to 26 elements were determined in plant materials. For easy review of our data a score has been calculated based on the reference value for each measured element. According to our results the ICP-AES technique was useful for determination of the following elements: Ba, Ca, Cr, Fe, K, Mn, Mo, P, S, Sr, Ti. The INAA method was reliable for measurement of Ce, Co, Mn, Na, Rb, Th, and V.     

Analysis of FDA in-house food reference materials with anticoincidence INAA

In-house reference material (IRM) cocoa powder (CCP) has been in use at US Food and Drug Administration laboratories for about 15 years. A single lot of commercial material was originally characterized for 32 elements by several laboratories and five techniques. A unique approach for basis weight determination based upon ambient relative humidity was developed for CCP, eliminating the need for dry weight determinations. The CCP Reference Sheet is updated by incorporating new results approximately every 5 years. The last update occurred in 2006. As part of an effort to revalidate and update values for CCP, anticoincidence instrumental neutron activation analysis (INAA) was used to determine mass fractions for 16 of the originally characterized elements, as well as to provide information on 16 other elements. Results were in very good agreement with 2006 Reference Sheet values. A new candidate IRM, fresh-frozen swordfish (FFSF) powder, was produced by adding inorganic As, Cd, Cr, Hg, Pb, Sb, and Se to liquid nitrogen-frozen commercial swordfish filets which were then homogenized. Portions of FFSF were analyzed by INAA to provide mass fraction and homogeneity information for As, Cd, Cr, Hg, Sb, and Se as well as for eight other elements occurring naturally in the material. Non-homogeneities were ≤2.5 % for As, Br, Cd, and Cs, and ≤1.8 % for Cr, Hg, Rb, Sb, and Se. Certified reference materials DORM-3 Fish Protein powder and fresh-frozen SRM 1947 Lake Michigan Fish Tissue were analyzed as controls.     

Sensitivity improvements in the determination of mercury in biological tissues by neutron activation analysis

The possible association of dental amalgam surface exposure, brain mercury (Hg) levels, and pathological markers of Alzheimer's disease (AD) in the brain is the subject of an on-going study in our laboratory. Two radiochemical neutron activation analysis methods and the use of instrumental neutron activation analysis (INAA) with Compton suppression spectrometry have been evaluated for improving our INAA Hg detection limit (2.8±0.6 ng/g, wet-weight basis) in human tissue. Large numbers of samples dictated the use of a purely instrumental method or rapid, simple radiochemical separations. Human brain tissues and NIST biological standards were analyzed using a precipitation of Hg₂Cl₂, a solvent extraction utilizing sodium diethyldithiocarbomate, conventional INAA, and INAA with Compton suppression. The radiochemical precipitation of Hg₂Cl₂ proved to be the most useful method for use in our study because it provided a simultaneous, quantitative determination of silver (Ag) and a Hg detection limit in brain tissue of 1.6±0.1 ng/g (wet-weight basis).     

Determination of trace element levels in polyethylene by instrumental neutron activation analysis

Elements Al, As, Au, Br, Cl, Co, Cr, Cu, Fe, Hg, K, La, Mn, Mo, Na, Sb, Sc, Sm, V, and Zn were determined by INAA in several brands and batches of high pressure polyethylene (PE) Bralen (Slovnaft Bratislava, Czechoslovakia). A large scatter of trace element contents was found in both granules and foils, indicating an inhomogeneous distribution for the majority of the above mentioned elements present as impurities in PE. Larger amounts of the elements Al, Mn, and Sb were found in foils than in granules. Blank values resulting from using of PE Bralen as a canning material for INAA were compared to trace element concentration in human hair samples, too.     

Mercury speciation in hair by headspace injection-gas chromatography-atomic fluorescence spectrometry (methylmercury) and combustion-atomic absorption spectrometry (total Hg)

The speciation of Hg in human hair was carried out with combustion-atomic absorption spectrometry for total Hg (THg) and headspace-gas chromatography-atomic fluorescence spectrometry (HS-GC-AFS) for methylmercury (MMHg).The determination of total Hg in hair was carried out with the AMA analyzer (Advanced Mercury Analyser 254). Accuracy and reproducibility were assessed on a Certified Reference hair sample (IAEA-086 CRM), yielding, respectively, a recovery of 97.5% and a RSD of 3.2%. Analyses of 10 blank measurements resulted in a detection limit of 1.5 ng g⁻¹ of THg for a 20 mg sample of human hair.MMHg concentrations in hair were assessed with HS-GC-AFS in a single analysis step. Either acid or alkaline extraction can be applied because they yielded very similar results on a IAEA-086 CRM: we observed a recovery of 103% and a RSD of 7% with acid extraction and a recovery of 110% and a RSD of 9% with alkaline extraction. Optimization of the headspace vial, injection and GC parameters is described. The detection limit of the MMHg determination in human hair, which amounts to 0.04 ng g⁻¹ for a 20 mg sample, is far below the concentrations observed in natural samples.The number of samples that can be analyzed per hour, respectively, amounts to 8 for THg and 4 for MMHg. Finally, Hg speciation in natural human hair samples was carried out by combining both AMA and HS-GC-AFS analysis methods. THg levels were at the μg g⁻¹, level, with an average MMHg fraction of about 70%.     

Determination of major and trace elements in human scalp hair by pressurized-liquid extraction with acetic acid and inductively coupled plasma–optical-emission spectrometry

An analytical method has been developed for determination of major (Ca, K, Mg, and Na) and trace elements (As, Cd, Co, Li, Ni, and Sr) in human scalp hair. The proposed method includes a novel, simple, rapid, highly efficient, and automated metal-leaching procedure, by pressurized-liquid extraction (PLE), combined with a rapid simultaneous detection system—inductively coupled plasma–optical-emission spectrometry (ICP–OES). PLE is one of the most promising recently introduced sample-preparation techniques, with the advantages of reducing solvent consumption and enabling automated sample handling. The operating conditions for PLE, including concentration of the extraction solvent, extraction temperature, static time, number of extraction steps, pressure, mean particle size, diatomaceous earth (DE) mass/sample mass ratio, and flush volume were studied using an experimental design (Plackett–Burman design, PBD). The optimum conditions were use of 0.75 mol L⁻¹ acetic acid as extracting solution and powdered hair samples thoroughly mixed with DE, as a dispersing agent, at a DE mass/sample mass ratio of 4. Extraction was performed at room temperature and an extraction pressure of 140 atm for 5 min in one extraction step. The flush volume was fixed at 60%. The PLE-assisted multi-element leaching proposed is complete after 7 min (5 min static time plus 1 min purge time plus 1 min end relief time). Under the optimised conditions the figures of merit, for example limits of detection and quantification, repeatability of the over-all procedure, and accuracy, were evaluated. Analysis of GBW-07601 (human hair) certified reference material revealed accuracy was good for the target elements. The optimised method was finally applied to several human scalp-hair samples.     

Determination of total mercury in human hair and animal fur by combustion atomic absorption spectrometry

A commercially available mercury (Hg) analyzer based on sample combustion, gold amalgamation, and atomic absorption spectrometry (AAS) was evaluated for the direct determination of Hg in composites of human hair and individual samples of horse fur. Results for human hair reference material (NIES No. 13) were within the certified range. Analyses of “blind” samples from an international interlaboratory (n>16) comparison study produced results within 1S.D. of the consensus means. Precision (%R.S.D.) was found to be <5% and total analyses time per sample was <10 min. This study demonstrated that analyzers based on combustion-AAS are suitable for wide-scale monitoring of Hg in human hair and animal fur.     

Time-resolved monitoring of heavy-metal intoxication in single hair by laser ablation ICP–DRCMS

The potential of laser ablation inductively coupled plasma mass spectrometry for the time-resolved analysis of heavy-metal intoxication in human bodies by analysis of hair is demonstrated. As application, we analyzed forensic samples from one individual after Hg intake and from one treated with a Pt-containing cytostatic remedy. Single hairs were analyzed from the hair root to the tip by laser ablation ICP–MS with a spatial resolution of 20 μm (corresponding to approx. 2 h growth of the hair). Sulfur was used as internal standard and was analyzed by using oxygen as reaction gas in the dynamic reaction cell of the ICP–DRCMS. The detection limits for Hg and Pt were found to be 0.3 μg g^–1 and 0.5 ng g⁻¹, respectively. Standard uncertainties for the quantification results were 10% for Hg and approximately 15 % for Pt. The analyzed hair samples reflected the forensic evidence in both cases. A significant increase of Hg concentration, by a factor of 50, at the time of HgO administration could be shown, and variation of Pt in the hair strands could be used to monitor the time and relative amount of Pt intake by the patient. The investigations also revealed that the concentrations in the outer and the inner parts of the hair varied similarly with time, even though the concentration in the core of the hair is approximately 0.25 that at the surface for both Pt and Hg.     

Fast ultrasound-assisted extraction of copper,iron, manganese and zinc from human hair samples prior to flow injection flame atomic absorption spectrometric detection

A dynamic ultrasound-assisted extraction procedure utilizing diluted nitric acid was developed for the determination of copper, iron, manganese and zinc in human hair taken from workers in permanent contact with a polluted environment. The extraction unit of the dynamic ultrasound-assisted extraction system contains a minicolumn into which a specified amount of hair (5–50 mg) is placed. Once inserted into the continuous manifold, trace metals were extracted at 3 mL min⁻¹ with 3 mol L⁻¹ nitric acid under the action of ultrasound for 2 min for zinc and 3 min for copper, iron and manganese determination, and using an ultrasonic water-bath temperature of 70 °C for zinc and 80 °C for copper, iron and manganese determination. The system permits the direct analysis of hair and yields concentrations with relative standard deviations of <3% (n = 11). The applicability of the procedure was verified by analysing human hair samples from workers exposed to welding fumes, and its accuracy was assessed through comparison with a conventional sample dissolution procedure and the use of a certified reference material (BCR 397, human hair).     

NAA,GC(EC) and SRXRF study of Hg species in head hair of mothers and their newborn infants

Twenty-seven pairs of head hair from mothers and their new-born infants were collected at the time of delivery in a hospital in Beijing. The total mercury content in the hair samples was determined by INAA. The correlation between mercury content in hair of mothers and their new-born infants has been investigated. In addition, the change of Hg content in pregnant women's hair during their pregnancy was also studied by INAA and SRXRF. The results indicate a significant positive correlation between the mercury content in maternal and infant head hairs (r=+0.862, p<0.001). The average content of Hg in infant and maternal hairs was 0.66±0.31 g/g and 0.59±0.25 g/g, respectively. The infant level exceeded the maternal by 12%. The Hg content in maternal head hair gradually reduced during pregnancy. Further, the methylmercury (Me–Hg) content in 3 maternal hair samples was analyzed by GC(EC). The Me–Hg was in accordance with the total mercury content. Thus a conclusion can be drawn that damage to the infant from Hg occurred in the early stages of pregnancy.This project is funded by the International Atomic Energy Agency (Contract No. 6332/RI/RB) and the Chinese National Natural Science Foundation (Contract No. 19392100)     

Novel thionin-functionalised core shell magnetic nanoparticles for dispersive solid-phase extraction of Hg(II) in food and water samples

To develop an accurate and precise method for separation and pre-concentration of Hg(II), a novel thionin functionalised core shell structure magnetic material has been prepared and characterised. The extraction ability of the material was evaluated by magnetic solid-phase extraction coupled with inductively coupled plasma mass spectrometry determination of Hg(II) in food and water samples. Combining the advantages of magnetic separation with selective extraction of thionin towards Hg(II), the material exhibits enhanced enrich selectivity and efficiency for Hg(II). The experimental parameters influencing Hg(II) extraction efficiency, including pH of the aqueous solution, the dosage of the adsorbent, extraction time and sample volume, were systematically investigated. Under the optimised conditions, concentration of Hg(II) at 1.0 μg L^?1 can be successfully enriched by the material without the interference of the common co-existing ions. The enrichment factor and adsorption capacity were 250 and 75.2 mg g^?1, and precise of the method was confirmed by analysing the spiked food, water samples and standard water reference samples with the recoveries of 92.5–101.8%.     

INAA and PIXE for the determination of the contents of extractable sediment

The three-stage BCR sequential step reference extraction procedure was applied to the reference material BCR CRM 601, especially developed for fractionation studies. Extracted fractions were analyzed for Cr, Ni, Zn, Cd, and Pb, by k ₀-standardized instrumental neutron activation (k ₀ INAA) and proton induced X-ray emission (PIXE), and flame atomic absorption spectrometry (FAAS). Sample preparation procedures were developed for both k ₀ INAA and PIXE techniques, related to the evaporation of the solutions in order to get solid samples for neutron and proton irradiation. Quality control was assessed by intercomparison of the analytical results obtained by the applied techniques, which included results for a few certified reference materials. In the extracted fractions, chromium concentration was not determined accurately by both nuclear techniques. Concerning Cd, Ni, Pb, and Zn, the results were in general in good agreement with the certified values and FAAS. Some incomplete separation of the residue might have occurred.     

Study of the correlation of trace elments in human hair and internal organs by NAA

24 male autopsy cases aged 35–60 years have been collected from Shanghai China to study the relationships between human hair and internal tissues. Autopsy samples of hair, kidney-cortex, liver and lung were analyzed. A radiochemical neutron activation analysis (RNAA) based on a simple group extraction scheme was used for measuring the trace elements As, Cd, Hg, Cu and Zn. Zinc diethyldithiocarbamate Zn(DDC)₂ and methly isobutyl ketone-iodide have been chosen as reagent. Trace element of Se was determined by instrumental neutron activation analysis (INAA). A SLOWPOKE reactor with a thermal neutron flux of 8·10¹¹ n·cm^–2·s^–1 and a swimming pool type reactor with a thermal neutron flux of 1·10¹³ n·cm^–2·s^–1 were used for short and long irradiation of samples, respectively. The reliability of methods has been checked by analyzing biological standard reference materials Horse Kidney (IAEA H8), Tomato Leaves (NBS 1573) and Human Hair (NIES-5). The analytical results show that toxic elements As, Cd and Hg exist in a larger individual variability than the essential elements of Cu, Se and Zn for each tissue. A linear regression analysis related to the six elements of primary interest for the IAEA Coordinated Research Program (CRP) has been done by a computer program for each pair of hair-tissue. A positive correlation is found between concentration of As in hair and kidney-cortex, the correlation coefficient r is 0.751 (p<0.01). Positive correlations between concentration of Se in hair and liver, kidney-cortex and lung are also observed in this study. It shows that the elements As and Se in hair may be useful indicators for assessing certain internal tissues of normal persons. A comparison of Cd concentration in lung shows a significant difference between smokers and non-smokers. A significant correlation between element Cd and Zn in kidney-cortex is also presented in this paper.     

Application of k0-based internal mono standard instrumental neutron activation analysis method method for composition analysis of stainless steel clad sample

The k₀-based internal mono standard instrumental neutron activation analysis (INAA) method was used for the composition analysis of some irregular shape stainless steel (SS) samples of type SS 316M, which is used as fuel cladding in Indian fast breeder test reactor (FBTR). The method utilizes in situ relative detection efficiency using γ-rays of the activation products present in the sample for overcoming γ-ray self-attenuation. Samples were neutron activated using the thermal column as well as the core position of the reactor and the assay of radioactivity was carried out by high-resolution gamma ray spectrometry. The elements determined were Fe, Cr, Ni, Mo, Mn, Co, Cu, As and W. Since all the major elements (Fe, Cr, Ni, Mo and Mn) were amenable to NAA, the relative elemental concentrations with respect to Fe, obtained by this method, were converted to their absolute values by mass balance. The results were compared with specified compositions and found to be satisfactory. In order to validate these results obtained by the standard-less approach, sub samples of SS 316M in solution forms were analyzed by prevalent relative and k₀ methods of INAA, and results were found to be in good agreement. The accuracy of the internal mono standard INAA method has been evaluated by analyzing an alloy steel certified reference material, CRM 225/1 of British Chemical Standards (BCS).     

Mercury speciation analysis in human hair by species-specific isotope-dilution using GC–ICP–MS

We optimized a mercury (Hg) speciation extraction method for human hair in combination with species-specific isotope-dilution analysis by gas chromatography–inductively coupled plasma–mass spectrometry (GC–ICP–MS). The method was validated on human hair reference material RM (IAEA-086), which is recommended for analysis of monomethylmercury (MMHg) and inorganic mercury (IHg). Three reagents, hydrochloric acid (HCl), nitric acid (HNO₃), and tetramethylammonium hydroxide (TMAH), and three extraction procedures, at ambient temperature for 12 h, microwave-assisted at 75 °C for 6 min, and oven heated at 80 °C for 2 h were tested. Extraction efficiency, recovery, and potential species transformations were evaluated for each method. The most efficient procedures, with recovery of ~90 % for each species with limited demethylation (<5 %) and methylation (0 %), were HNO₃ digestion, irrespective of temperature, and microwave-assisted TMAH extraction. Acidic extraction with HCl induces significant demethylation, with production of artifacts. To correct for potential demethylation artifacts we recommend spiking with isotopically enriched standards before the extraction step.