退火诱导亚稳态Fe80Cu20合金固溶体的结构相变

利用扩展x射线吸收精细结构和x射线衍射研究了机械合金化制备的体心立方(bcc)的亚稳态Fe80Cu20合金固溶体的结构随退火温度的变化特点.结果表明,在300-873 K温度范围内,随着退火温度的升高,bcc结构物相的晶格常数近于线性降低,这主要是由于Cu原子从bcc结构Fe80Cu20合金固溶体中逐渐偏析出来,生成面心立方(fcc)结构的Cu物相所致.经603 K退火后,Cu原子的平均键长RCu-Cu增加了0.003 nm左右,大约有50%的Cu原子从bcc结构的Fe80Cu20合金固溶体中偏析出来.在773 K退火后,bcc结构Fe80Cu20合金固溶体近于完全相分离,生成了bcc结构的α-Fe与fcc结构的Cu物相.     

多形性相变的分子动力学模拟

 本文利用分子动力学方法研究了KCl晶体在ρ＝ρ₀时的温度相变。面心立方（fcc）和体心立方（bcc）两种结构的径向分布函数随温度的变化的情况说明，在高压下，发生着bcc结构相fcc结构的转变，bcc结构是不稳定的。为了选取合理的势参数，利用了分子动力学程序在T＝0时的性质，计算了NaCl和KCl晶体的零温状态方程，研究了它们在压力作用下发生的多形性相变。计算表明，NaCl和KCl晶体将分别于18.8 GPa和5.9 GPa发生从fcc到bcc的多形性相变，这些值相当接近实验结果。着说明本文选用的势参数势有一定精度的。     

α-锆的低压动态力学特性

锆在常态为六角密堆（Hexagonal close-packed，hcp）结构（α相），在高压下转变成六方结构（ω相），温度升高时（1136K以上）转变为体心立方（Body-centered-cubic，bcc）结构（β相），更高温度（2123K）下熔化。锆在较低压力下发生α→β相变，材料强度影响不可忽略，研究表明材料在屈服后发生相变，会对已有的塑性流动起增强作用。本构关系对于研究锆在冲击加载下相变前后、相变期间的物理和力学性质的变化，理解锆的基本动力学特性是必不可少的。     

过渡金属钼高压物性的第一原理研究北大核心CSCD

在平面波赝势密度泛函理论的框架下,利用广义梯度近似(GGA)计算了体心立方(bcc)和双层密排六方(dhcp)结构的Mo在不同体积下的总能和焓值,算得的等温压缩线与前人的计算结果符合较好。对焓值作差,预测了620GPa压强附近bcc→dhcp的结构相变。根据声子谱的计算结果可知,在高压下,bcc结构可能会向dhcp或9R结构转变。力学稳定性的计算结果进一步显示,在620GPa以上,dhcp-Mo是能够稳定存在的相。结合准谐德拜模型研究了Mo在高压下的热力学性质,计算结果表明,在620GPa附近,bcc和dhcp结构Mo的热力学性质并无显著差异。     

一维应变加载下单晶铁结构转变的微观研究

采用嵌入原子势和分子动力学方法,模拟了单晶铁在一维应变条件下由体心立方（bcc）转变为六角密排（hcp）结构的微观过程. 当应变加载至相变临界值时,hcp相开始均匀形核并沿{011}晶面长大为薄片状体系.弹性常数C₃₁和C₃₂在相变前被逐渐硬化,C₃₃则在相变前出现软化行为;当体系完全相变后,上述各弹性常数显示开始随体积压缩而迅速硬化,温度效应对晶格具有软化作用,可削弱C₃₃的硬化和软化过程;样品在压缩过程可出现孪晶结构,孪晶结构使晶格发生剪切变形.混合相中,hcp相势能比bcc相高,最大剪应力方向与bcc相反向;系统的偏应力与hcp相质量分数近似呈线性关系. 关键词： 结构转变 分子动力学 一维应变     

过渡金属钼高压物性的第一原理研究

在平面波赝势密度泛函理论的框架下,利用广义梯度近似(GGA)计算了体心立方(bcc)和双层密排六方(dhcp)结构的Mo在不同体积下的总能和焓值,算得的等温压缩线与前人的计算结果符合较好。对焓值作差,预测了620GPa压强附近bcc→dhcp的结构相变。根据声子谱的计算结果可知,在高压下,bcc结构可能会向dhcp或9R结构转变。力学稳定性的计算结果进一步显示,在620GPa以上,dhcp-Mo是能够稳定存在的相。结合准谐德拜模型研究了Mo在高压下的热力学性质,计算结果表明,在620GPa附近,bcc和dhcp结构Mo的热力学性质并无显著差异。     

退火诱导亚稳态Fe80Cu20合金固溶体的结构相变

利用扩展x射线吸收精细结构和x射线衍射研究了机械合金化制备的体心立方(bcc)的亚稳态Fe₈₀Cu₂₀合金固溶体的结构随退火温度的变化特点.结果表明，在300—873 K温度范围内，随着退火温度的升高，bcc结构物相的晶格常数近于线性降低，这主要是由于Cu原子从bcc结构Fe₈₀Cu₂₀合金固溶体中逐渐偏析出来，生成面心立方(fcc)结构的Cu物相所致.经603K退火后，Cu原子的平均键长R_Cu—Cu增加了0.003 nm左右，大约有50%的Cu原子从bcc结构的Fe₈₀Cu₂₀合金固溶体中偏析出来.在773 K退火后，bcc结构Fe_８０Cu₂₀合金固溶体近于完全相分离，生成了bcc结构的α-Fe与fcc结构的Cu物相. 关键词： 扩展x射线吸收精细结构 x射线衍射 ８０Cu₂₀合金')" href="#">Fe_８０Cu₂₀合金 机械合金化     

第一性原理计算Fe从bcc到hcp结构的相变路径及其磁性边界

本文采用基于密度泛函理论的第一性原理方法,计算了压力作用下Fe从bcc到hcp结构相变的势能面、相变路径以及相变过程中的磁性相边界.结果表明:与Burgers路径不同,相变过程中bcc结构(110)bcc面的剪切和相对滑移相互耦合,并伴随有(110)bcc面间距的减小;这一相变机制可以解释Fe的静高压实验中在相变初期观察到的hcp结构异常.因此,并不需要像Wang和Ingalls提出的那样,在相变过程中引入一个亚稳定的fcc相来解释这些实验结果.对相变势能面的计算表明剪切对相变的发生有激活作用.此外,分析表明相变过程中涉及复杂的磁性转变,相变过渡态位置正好位于磁性相边界上,并对原子磁性对结构转变影响的物理机制进行了讨论.     

Li9团簇体心立方结构的形成机理和结合能

本文提出了Li9团簇体心立方结构的形成机理,并对此结构的总能量随中心原子到顶点原子间核间距R的变化用芶氏改进的排列通道量子力学方法(MACQM)进行了计算。结果显示曲线在R = 4.77 a0处有一极小值 -67.160922 a.u.,这表明Li9团簇的体心立方结构是可能稳定存在的。在R趋于无穷大时这9个锂原子的总能量为 -66.852240 a.u.,所以形成Li9的总结合能为0.308682 a.u.。因此Li9 团簇的原子平均结合能是0.034298 a.u.或0.933 eV,它大于我们过去计算的Li5团簇正四面体中心结构的原子平均结合能0.632 eV、Li7 团簇正八面体中心结构的原子平均结合能0.674 eV和Li13 团簇正二十面体中心结构的原子平均结合能0.810 eV。故在体心正多面体结构Lin (n= 5 ,7,9,13)中,Li9的体心立方结构有最大的原子平均结合能,这也许是碱金属晶体的晶胞取体心立方结构的一个原因。     

硫酸锂钾的室温相和低温相的锂离子位置

核磁共振实验表明,LiKSO₄在T_c=195K发生结构相变。本文报道了温度低于T_c时,Li位电场梯度张量的温度依赖关系。结合理想离子晶体模型,讨论了该晶体的结构,指出室温相Li的位置并不像Bradley所推测的,在(2/3,1/3,0.849)的位置,而应在(2/3,1/3,0.706)的位置;195K的相变是由于Li离子的位移造成;低温相的空间群可能为R3。 关键词：     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.