Electrochemical Exfoliation of Pillared‐Layer Metal–Organic Framework to Boost the Oxygen Evolution Reaction

Two‐dimensional (2D) materials and ultrathin nanosheets are advantageous for elevating the catalysis performance and elucidating the catalysis mechanism of heterogeneous catalysts, but they are mostly restricted to inorganic or organic materials based on covalent bonds. We report an electrochemical/chemical exfoliation strategy for synthesizing metal–organic 2D materials based on coordination bonds. A catechol functionalized ligand is used as the redox active pillar to construct a pillared‐layer framework. When the 3D pillared‐layer MOF serves as an electrocatalyst for water oxidation (pH 13), the pillar ligands can be oxidized in situ and removed. The remaining ultrathin (2 nm) nanosheets of the metal–organic layers are an efficient catalyst with overpotentials as low as 211 mV at 10 mA cm^?2 and a turnover frequency as high as 30 s^?1 at an overpotential of 300 mV.     

Exfoliation of Metal–Organic Frameworks to Give 2D MOF Nanosheets for the Electrocatalytic Oxygen Evolution Reaction

The structure and properties of materials are determined by a diverse range of chemical bond formation and breaking mechanisms, which greatly motivates the development of selectively controlling the chemical bonds in order to achieve materials with specific characteristics. Here, an orientational intervening bond-breaking strategy is demonstrated for synthesizing ultrathin metal–organic framework (MOF) nanosheets through balancing the process of thermal decomposition and liquid nitrogen exfoliation. In such approach, proper thermal treatment can weaken the interlayer bond while maintaining the stability of the intralayer bond in the layered MOFs. And the following liquid nitrogen treatment results in significant deformation and stress in the layered MOFs’ structure due to the instant temperature drop and drastic expansion of liquid N₂, leading to the curling, detachment, and separation of the MOF layers. The produced MOF nanosheets with five cycles of treatment are primarily composed of nanosheets that are less than 10 nm in thickness. The MOF nanosheets exhibit enhanced catalytic performance in oxygen evolution reactions owing to the ultrathin thickness without capping agents which provide improved charge transfer efficiency and dense exposed active sites. This strategy underscores the significance of orientational intervention in chemical bonds to engineer innovative materials.     

A Surfactant‐Free and Scalable General Strategy for Synthesizing Ultrathin Two‐Dimensional Metal–Organic Framework Nanosheets for the Oxygen Evolution Reaction

Metal–organic framework (MOFs) two‐dimensional (2D) nanosheets have many coordinatively unsaturated metal sites that act as active centres for catalysis. To date, limited numbers of 2D MOFs nanosheets can be obtained through top‐down or bottom‐up synthesis strategies. Herein, we report a 2D oxide sacrifice approach (2dOSA) to facilely synthesize ultrathin MOF‐74 and BTC MOF nanosheets with a flexible combination of metal sites, which cannot be obtained through the delamination of their bulk counterparts (top‐down) or the conventional solvothermal method (bottom‐up). The ultrathin iron–cobalt MOF‐74 nanosheets prepared are only 2.6 nm thick. The sample enriched with surface coordinatively unsaturated metal sites, exhibits a significantly higher oxygen evolution reaction reactivity than bulk FeCo MOF‐74 particles and the state‐of‐the‐art MOF catalyst. It is believed that this 2dOSA could provide a new and simple way to synthesize various ultrathin MOF nanosheets for wide applications.     

Growing ZIF-8 Seeds on Charged COF Substrates toward Efficient Propylene-Propane Separation Membranes

We report a covalent organic framework (COF) induced seeding strategy to fabricate metal–organic framework (MOF) membranes. Contrary to graphene oxide nuclei-depositing substrate, COF substrate has uniform pore size, high microporosity and abundant functional groups. We designed a series of charged COF nanosheets to induce the formation of ZIF-8@COF nanosheet seeds with high aspect ratio over 150, which were readily processed into a compact and uniform seed layer. The resulting ZIF-8 membranes with thickness down to 100 nm exhibit an ultrahigh C₃H₆/C₃H₈ separation performance and superior long-term stability. Our strategy is also validated by fabricating ultrathin ZIF-67 and UiO-66 membranes.     

Synthetic Strategies for Constructing Two‐Dimensional Metal‐Organic Layers (MOLs): A Tutorial Review

Two‐dimensional (2D) metal‐organic layers (MOLs) are the 2D version of metal‐organic frameworks (MOFs) with nanometer thickness in one dimension. MOLs are also known as 2D‐MOFs, 2D coordination polymers, ultrathin MOF nanosheets (UMOFNs) or coordination nanosheets in literature. This new category of 2D materials has attracted a lot of interests because of the opportunity in combining molecular chemistry, surface/interface chemistry and material chemistry of low dimensional materials in these systems. Several synthetic strategies have been developed for the construction of 2D MOLs, but the general synthesis of MOLs still presents a challenge. This tutorial level review summarizes the recent progress in the fabrication of novel 2D MOLs and aims to highlight challenges in this field.     

Chemically Delaminated Free‐Standing Ultrathin Covalent Organic Nanosheets

Covalent organic nanosheets (CONs) are a new class of porous thin two‐dimensional (2D) nanostructures that can be easily designed and functionalized and could be useful for separation applications. Poor dispersion, layer restacking, and difficult postsynthetic modifications are the major hurdles that need to be overcome to fabricate scalable CON thin films. Herein, we present a unique approach for the chemical exfoliation of an anthracene‐based covalent organic framework (COF) to N‐hexylmaleimide‐functionalized CONs, to yield centimeter‐sized free‐standing thin films through layer‐by‐layer CON assembly at the air–water interface. The thin‐layer fabrication technique presented here is simple, scalable, and does not require any surfactants or stabilizing agents.     

A Molecular Pillar Approach To Grow Vertical Covalent Organic Framework Nanosheets on Graphene: Hybrid Materials for Energy Storage

Hybrid 2D–2D materials composed of perpendicularly oriented covalent organic frameworks (COFs) and graphene were prepared and tested for energy storage applications. Diboronic acid molecules covalently attached to graphene oxide (GO) were used as nucleation sites for directing vertical growth of COF‐1 nanosheets (v‐COF‐GO). The hybrid material has a forest of COF‐1 nanosheets with a thickness of 3 to 15 nm in edge‐on orientation relative to GO. The reaction performed without molecular pillars resulted in uncontrollable growth of thick COF‐1 platelets parallel to the surface of GO. The v‐COF‐GO was converted into a conductive carbon material preserving the nanostructure of precursor with ultrathin porous carbon nanosheets grafted to graphene in edge‐on orientation. It was demonstrated as a high‐performance electrode material for supercapacitors. The molecular pillar approach can be used for preparation of many other 2D‐2D materials with control of their relative orientation.     

Zeolitic Imidazolate Framework/Graphene Oxide Hybrid Nanosheets as Seeds for the Growth of Ultrathin Molecular Sieving Membranes

A defect‐free zeolitic imidazolate framework‐8 (ZIF‐8)/graphene oxide (GO) membrane with a thickness of 100 nm was prepared using two‐dimensional (2D) ZIF‐8/GO hybrid nanosheets as seeds. Hybrid nanosheets with a suitable amount of ZIF‐8 nanocrystals were essential for producing a uniform seeding layer that facilitates fast crystal intergrowth during membrane formation. Moreover, the seeding layer acts as a barrier between two different synthesis solutions, and self‐limits crystal growth and effectively eliminates defects during the contra‐diffusion process. The resulting ultrathin membranes show excellent molecular sieving gas separation properties, such as with a high CO₂/N₂ selectivity of 7.0. This 2D nano‐hybrid seeding strategy can be readily extended to the fabrication of other defect‐free and ultrathin MOF or zeolite molecular sieving membranes for a wide range of separation applications.     

A Phosphine-Amine-Linked Covalent Organic Framework with Staggered Stacking Structure for Lithium-Ion Conduction

In-plane ionic conduction over two-dimensional (2D) materials is desirable for flexible electronics. Exfoliating 2D covalent organic frameworks (COFs) towards a few layers is highly anticipated, whereas most examples remain robust via π-stacking against the interlayered dislocation. Herein, we synthesize a phosphine-amine-linked 2D COF by a nucleophilic substitution reaction of phosphazene with amines. The synthesized COF is crystalline, and stacks in an AB-staggered fashion, wherein the AB dual layers are interlocked by embedding P−Cl bonds from one to another layer, and the non-interlocked layers are readily delaminated. Therefore, in situ post-quaternization over phosphazene can improve the ionization of backbones, accompanied by layered exfoliation. The ultrathin nanosheets can decouple lithium salts for fast solid-state ion transport, achieving a high conductivity and low activation energy. Our findings explore the P−N substitution reaction for COF crystallization and demonstrate that the staggered stacking 2D COFs are readily exfoliated for designing solid electrolytes.     

Two-Dimensional Metal–Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II] was precisely anchored onto water-stable 2D metal–organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h⁻¹ at −0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO) of 85.1 %, TOF of 5315 h⁻¹, and j_total of 6 mA cm⁻² at −0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.     

Construction of a Three-dimensional Covalent Organic Framework via the Linker Exchange Strategy

Covalent organic framework(COF) is a porous crystalline material with a well-controlled structure and a wide range of potential applications. However, the construction of new COF faces huge challenges, including the design and synthesis of structural unit monomers, the choice of reaction solvent system, and the study of reaction time and temperature. So, it’s particularly important to widen the application scope of synthetic methods and further promote the development of COFs. Here, we performed structural transformations in a three-dimensional(3D) COF(COF-300), and Fourier transform infrared spectroscopy(FTIR), power X-ray diffraction analysis(PXRD) and nitrogen adsorption isotherms confirmed the chemical principles and the successful realization of these exchanges. At the same time, we found that the interpenetrating structure in 3D COF can be changed through the conversion of linkers. The structure simulation successfully proved the transformation of COF from five-fold to seven-fold interpenetration. In addition, in order to prove the versatility of this strategy, we used the same method to convert COF-300 into a high crystallinity 3D COF(TJNU-COF-302) that is also seven-fold interpenetrating and has not been reported. This simple strategy not only makes it easy to obtain a 3D COF connected with imines, which greatly promotes the development of COF, but also provides a new way to develop 3D COFs with complex interpenetrating structures.     

Microstructure Manipulation of Covalent Organic Frameworks (COFs)-based Membrane for Efficient Separations

Covalent organic framework(COF) membranes have exhibited great potential to become the next-generation membranes for efficient separations due to the diverse structures, ordered framework pores, tunable functionality and excellent stability. This review presents the microstructure manipulation strategies for separation performance enhancement of COF membranes in recent years. Based on the three mechanisms of molecular sieving, surface diffusion, and facilitated transport, the structural modulation methods to enhance the selectivity of COF membranes are analyzed in detail. Next, strategies of realizing ultrashort mass transfer pathways and ultralow mass transfer resistance for the permeability enhancement are elaborated. Furthermore, the framework stability in COFs, interlayer stability between COF nanosheets and interfacial stability between COF layer and substrate are discussed. Finally, we discuss the existing challenges and perspectives on the future development of COF membranes, targeting at identifying the most promising strategies and directions for the engineering of COF membranes.     

二维金属有机框架纳米片的合成及在超电容和电催化领域的应用

二维金属有机框架(2D MOF)纳米片具有丰富且易暴露的表面活性位点、 高度有序的孔结构以及多样且可调的化学成分, 在电化学能量存储与转化中有利于降低反应电位, 提高扩散速率和反应速率. 关于2D MOF应用于电化学存储与转化的研究已有大量报道. 本文综合评述了近几年2D MOF的合成进展及其在超电容(SC)、 析氧反应(OER)、 析氢反应(HER)、 氧还原反应(ORR)和二氧化碳还原反应(CRR)的应用, 并对2D MOF作为电催化材料的研究现状和发展前景进行了总结与展望.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Ultrathin Hexagonal Hybrid Nanosheets Synthesized by Graphene Oxide‐Assisted Exfoliation of β‐Co(OH)2 Mesocrystals

In the present study, we report the synthesis of a high‐quality, single‐crystal hexagonal β‐Co(OH)₂ nanosheet, exhibiting a thickness down to ten atomic layers and an aspect ratio exceeding 900, by using graphene oxide (GO) as an exfoliant of β‐Co(OH)₂ nanoflowers. Unlike conventional approaches using ionic precursors in which morphological control is realized by structure‐directing molecules, the β‐Co(OH)₂ flower‐like superstructures were first grown by a nanoparticle‐mediated crystallization process, which results in large 3D superstructure consisting of ultrathin nanosheets interspaced by polydimethoxyaniline (PDMA). Thereafter, β‐Co(OH)₂ nanoflowers were chemically exfoliated by surface‐active GO under hydrothermal conditions into unilamellar single‐crystal nanosheets. In this reaction, GO acts as a two‐dimensional (2D) amphiphile to facilitate the exfoliation process through tailored interactions between organic and inorganic molecules. Meanwhile, the on‐site conjugation of GO and Co(OH)₂ promotes the thermodynamic stability of freestanding ultrathin nanosheets and restrains further growth through Oswald ripening. The unique 2D structure combined with functionalities of the hybrid ultrathin Co(OH)₂ nanosheets on rGO resulted in a remarkably enhanced lithium‐ion storage performance as anode materials, maintaining a reversible capacity of 860 mA h g^?1 for as many as 30 cycles. Since mesocrystals are ubiquitous and rich in morphological diversity, the strategy of the GO‐assisted exfoliation of mesocrystals developed here provides an opportunity for the synthesis of new functional nanostructures that could bear importance in clean renewable energy, catalysis, photoelectronics, and photonics.     

Thermal expansion-quench of nickel metal-organic framework into nanosheets for efficient visible light CO2 reduction

Metal-organic framework nanosheets (MOF NNs) offer potential opportunities for many applications,but an efficient strategy for the scalable preparation of few-layered two-dimensional (2D) MOF NNs are still a major challenge.Herein,we present an efficient top-down method for the synthesis of the Ni-BDC(Ni₂(OH)₂(1,4-BDC);1,4-BDC=1,4-benzenedicarboxylate) nanosheets utilizing a novel thermal expansionquench method of the flowerlike bulky MOFs in liquid N₂.The obtain...     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Two-dimensional covalent organic framework nanosheets: Synthesis and energy-related applications

Two-dimensional(2D) covalent organic framework nanosheets(CONs) are attracting increasing research attention because of their unique properties derived from their ultrathin thickness, high surface-tovolume atomic ratio, and extremely large surface area. 2D CONs can provide high transport pathways for charge carriers(e.g., electrons, holes and ions) through either the conjugated skeletons or the open channels. Therefore, they have shown great potential in energy related applications. In this revi...     

Two‐Dimensional Metal–Organic Framework Nanosheets for Membrane‐Based Gas Separation

Metal–organic framework (MOF) nanosheets could serve as ideal building blocks of molecular sieve membranes owing to their structural diversity and minimized mass‐transfer barrier. To date, discovery of appropriate MOF nanosheets and facile fabrication of high performance MOF nanosheet‐based membranes remain as great challenges. A modified soft‐physical exfoliation method was used to disintegrate a lamellar amphiprotic MOF into nanosheets with a high aspect ratio. Consequently sub‐10 nm‐thick ultrathin membranes were successfully prepared, and these demonstrated a remarkable H₂/CO₂ separation performance, with a separation factor of up to 166 and H₂ permeance of up to 8×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ at elevated testing temperatures owing to a well‐defined size‐exclusion effect. This nanosheet‐based membrane holds great promise as the next generation of ultrapermeable gas separation membrane.     

Electric-Field Assisted In Situ Hydrolysis of Bulk Metal–Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution

Facile preparation of low-cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal–organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs ( FJI-H25Fe and FJI-H25FeCo ), only the metastable FJI-H25FeCo bulk can immediately transform into FeCo-oxyhydroxides nanosheets through electric-field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo-oxyhydroxides nanosheets has been investigated in detail. The as-made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm⁻², a relatively small Tafel slope of 42 mV dec⁻¹, and long-term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low-cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.