Development of an efficient method for preparation of 1,3,5-trihydroxyisocyanuric acid (THICA) and its use as aerobic oxidation catalyst

1,3,5-Trihydroxyisocyanuric acid (THICA), which serves as an efficient radical-producing catalyst from hydrocarbons, was successfully prepared by two methods. The reaction of O-benzylhydroxyamine with phenyl chloroformate gave formbenzyloxycarbamic acid phenyl ester of which subsequent treatment with dimethylaminopyridine (DMAP) produced 1,3,5-tribenzyloxyisocyanurate leading to THICA by hydrogenation with H₂ on Pd/C. The other method involved the direct synthesis of 1,3,5-tribenzyloxyisocyanurate from O-benzylhydroxyamine and diphenyl carbonate. The aerobic oxidation of p-methylanisole catalyzed using THICA as a key catalyst afforded p-anisic acid in almost quantitative yield (>99%).     

Model reactions of functionalization of polycarbonate. Reactions of phenyl chloroformate with nucleophiles and cationic polymerization behavior of bicyclo orthoesters containing carbonate group

Some model experiments for functionalization of a polycarbonate were carried out. At first, reactivity of phenyl chloroformate with a few nucleophiles was examined. Reaction with alkyl amines gave corresponding carbamates, but in the case of aniline, formation of a byproduct diarylurea was observed. Reactions with alcohols and phenols afforded carbonates in moderate yields, in which p-nitrophenol and isopropyl alcohol were less reactive. On the basis of these results, 1-ethyl-4-phenoxycarboxymethyl-2,6,7-trioxabicyclo[2.2.2]octane (2) and 1-ethyl-4-ethoxycarboxymethyl-2,6,7-trioxabicyclo[2.2.2]octane (3) were prepared by the reaction of phenyl and ethyl chloroformates with 1-ethyl-4-hydroxymethyl-2,6,7-trioxabicyclo[2.2.2]octane in the presence of tert-amine. 2 polymerized cationically with BF₃OEt₂ at more than 80°C to give a polyether containing both ester and carbonate groups in the side chain, with contamination of a gelled polymer.     

Determination of amines using 2-(11H-benzo[a]carbazol-11-yl) ethyl chloroformate (BCEC-Cl) as labeling reagent by HPLC with fluorescence detection and identification with APCI/MS

A pre-column derivatization method for the sensitive determination of amines using a labeling reagent 2-(11H-benzo[a]-carbazol-11-yl) ethyl chloroformate (BCEC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives was carried out by LC/APCI/MS in positive-ion mode. The chromophore of 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC-Cl) reagent was replaced by 2-(11H-benzo[a]-carbazol-11-yl) ethyl functional group, which resulted in a sensitive fluorescence derivatizing reagent BCEC-Cl. BCEC-Cl could easily and quickly label amines. Derivatives were stable enough to be efficiently analyzed by HPLC and showed an intense protonated molecular ion corresponding m/z [M + H]⁺ under APCI/MS in positive-ion mode. The collision-induced dissociation of the protonated molecular ion formed characteristic fragment ions at m/z 261.8 and m/z 243.8 corresponding to the cleavages of CH₂O-CO and CH₂-OCO bonds. Studies on derivatization demonstrated excellent derivative yields over the pH 9.0-10.0. Maximal yields close to 100% were observed with three- to four-fold molar reagent excess. In addition, the detection responses for BCEC-derivatives were compared to those obtained using 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC-Cl) and 9-fluorenyl methylchloroformate (FMOC-Cl) as labeling reagents. The ratios I_BCEC/I_BCEOC = 1.94-2.17 and I_BCEC/I_FMOC = 1.04-2.19 for fluorescent (FL) responses (here, I was relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits calculated from 0.50 pmol injection, at a signal-to-noise ratio of 3, were 1.77-14.4 fmol. The relative standard deviations for within-day determination (n = 11) were 1.84-2.89% for the tested amines. The mean intra- and inter-assay precision for all amines levels were <3.64% and 2.52%, respectively. The mean recoveries ranged from 96.6% to 107.1% with their standard deviations in the range of 0.8-2.7. Excellent linear responses were observed with coefficients of >0.9996.     

Prenyl carbamates: preparation and deprotection

Prenyloxycarbonylimidazole (PreocIm) and prenyl p-nitrophenyl carbonate (PreocOC₆H₄p-NO₂), two substitutes for the unstable prenyl chloroformate, allowed an efficient introduction of the prenyloxycarbonyl group to a variety of primary and secondary amines. Deprotection of prenyl carbamates was readily achieved by, first their conversion to 2-iodo-3-methoxy-3-methylbutyl carbamates with iodine in methanol followed by reductive β-elimination with zinc powder. These reaction conditions are compatible with the presence of a number of functional groups such as Boc and Cbz carbamates, sulfides, double bonds, indoles and aromatic ethers.     

Synthesis of Polyanionic Cellulose Carbamates by Homogeneous Aminolysis in an Ionic Liquid/DMF Medium

Polyanionic cellulose carbamates were synthesized by rapid and efficient homogeneous aminolysis of cellulose carbonate half-esters in an ionic liquid/DMF medium. Cellulose bis-2,3-O-(3,5-dimethylphenyl carbamate), as a model compound, reacted with different chloroformates to cellulose carbonates. These intermediates were subjected to aminolysis, for which both the reactivity of different chloroformates towards C6-OH and the reactivity/suitability of the respective carbonate half-ester in the aminolysis were comprehensively studied. Phenyl chloroformate and 4-chlorophenyl chloroformate readily reacted with C6-OH of the model cellulose derivative, while 4-nitrophenyl chloroformate did not. The intermediate 4-chlorophenyl carbonate derivative with the highest DS (1.05) was then used to evaluate different aminolysis pathways, applying three different amines (propargyl amine, β-alanine, and taurine) as reactants. The latter two zwitterionic compounds are only sparingly soluble in pure DMF as the typical reaction medium for aminolysis; therefore, several alternative procedures were suggested, carefully evaluated, and critically compared. Solubility problems with β-alanine and taurine were overcome by the binary solvent system DMF/[EMIM]OAc (1:1, v/v), which was shown to be a promising medium for rapid and efficient homogeneous aminolysis and for the preparation of the corresponding cellulose carbamate derivatives or other compounds that are not accessible by conventional isocyanate chemistry. The zwitterionic cellulose carbamate derivatives presented in this work could be promising chiral cation exchangers for HPLC enantiomer separations.     

Reaction products of dichlorodiorganostannanes with sodium in liquid ammonia: In-situ investigations with Sn NMR spectroscopy and usage as intermediates for the synthesis of tetraorganostannanes

Dichlorodibutylstannane, dichlorodioctylstannane and dichlorodiphenylstannane were reacted with different amounts of sodium in liquid ammonia. At a molar ratio of R₂SnCl₂/Na of 1:2, polystannanes precipitated, in some cases accompanied by cyclic oligostannanes. The products resulting from mixtures with R₂SnCl₂/Na ratios of 1:3 to 1:10 were soluble and, hence, could be studied in-situ in liquid ammonia with ¹¹⁹Sn NMR spectroscopy. The compounds obtained, tin hydrides of the type R₂SnH⁻ and in certain cases distannides of the composition R₄Sn₂²⁻, formed essentially independent of the R₂SnCl₂/Na ratio; this, in contrast to views expressed in the literature. Our experiments showed that the chemical structure of the in-situ generated species did not permit to draw conclusions about the composition of the reaction products with bromoethane and vice versa - a practice commonly described. Furthermore, we observed migration of the butyl groups both in-situ during the reaction of dichlorodibutylstannane with sodium in liquid ammonia, as well as in the final reaction product. By contrast in the case of the phenyl substituent, migration was detected not during the chemical event in liquid ammonia, but only in the compounds formed. These observations imply a different mechanism for butyl and phenyl group migration.     

Deamination of protonated amines to yield protonated imines

Primary and secondary amines, when examined in atmospheric pressure chemical ionization, electrospray ionization, or chemical ionization, display protonated imines in their mass spectra. These products arise formally by nucleophilic substitution at the α-carbon with loss of both ammonia and molecular hydrogen. Collision-induced dissociation (CID) is used to characterize the product ions by comparison with authentic protonated imines. Gas-phase ion/molecule reactions of protonated amines with neutral amines also yield products that correspond to protonated imines (deamination and dehydrogenation), as well as providing simple deamination products. The reaction mechanism was investigated further by reacting the deamination product, the alkyl cation, with a neutral amine. The observed dehydrogenation of the nascent protonated secondary amine indicates that the reaction sequence is loss of ammonia followed by dehydrogenation even though the isolated protonated secondary amines did not undergo dehydrogenation upon CID. Formation of the deamination products in the protonated amine/amine reaction is competitive with proton-bound dimer formation. The proton-bound dimers do not yield deamination products under CID conditions in the ion trap or in experiments performed using a pentaquadrupole instrument. This demonstrates that the geometry of the proton-bound dimer, in which the α-carbons of the alkylamines are well separated [C _a -N-H-N-C _a ], is an unsuitable entry point on the potential energy hypersurface for formation of the imine [C _a -N-C _a ]. Isolation of the proton-bound dimers in the quadrupole ion trap is achieved with low efficiency and this characteristic can be used to distinguish them from their covalently bound isomers.     

Preparation of substituted semicarbazides from corresponding amines and hydrazines via phenyl carbamates

A simple synthetic procedure for the conversion of amines and hydrazines into substituted semicarbazides was developed. The initial condensation between the desired amine and phenyl chloroformate into phenyl carbamate is followed by the addition of hydrazine under basic conditions. The reaction is tolerable to a variety of functional groups, with mild conditions and high percent yields.     

Rh(II)-catalyzed [2,3]-sigmatropic rearrangement of sulfur ylides derived from N-tosylhydrazones and sulfides

In this paper, Rh₂(OAc)₄-catalyzed [2,3]-sigmatropic rearrangement of sulfur ylides derived from N-tosylhydrazones and sulfides is reported. A series of tosylhydrazones derived from aldehydes were successfully used for [2,3]-sigmatropic rearrangement by reaction with either allylic phenyl sulfides or propargyl phenyl sulfides. The reaction conditions were optimized and afforded the products in moderate to good yields. In addition, a novel and convenient approach for the synthesis of cyclobutenones and cyclopropanes has been developed through direct oxidation of the rearrangement products.     

Réactivité du polychloroformiate de vinyle et cinétique de relargage in vitro des molécules greffées

The chemical modification of poly(vinyl chloroformate) with amines (diethylamine, N-methylbenzamine, morpholine and piperidine), alcohols (sec. butyl alcohol and benzyl alcohol) and phenol has been investigated. We have found convenient conditions in order to obtain soluble modified polymers with nearly quantitative substitution; these modified polymers has been used as model molecules for biologically active compounds; kinetics in vitro of cleavage have shown that the rates of hydrolysis in stomacal medium are twice those in intestinal medium. These rates of cleavage are very low (0.1 at 1% in 24 hr) and allow use of poly(vinyl chloroformate) as a support for biologically active compounds during prolonged treatment.     

Reactivity study on morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide

Regioselective reactions of morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide ( 1 ) with electrophiles and nucleophiles were studied. The compound ( 1 ) reacts with alkyl halides in basic medium to afford S‐substituted isothiourea derivatives, with amines to give 1,1‐disubstituted‐3‐(2‐phenyl‐3H‐quinazolin‐4‐ylidene) thioureas and l‐substituted‐3‐(2‐phenyl‐quinazolin‐4‐yl) thioureas via transami‐nation reaction. The reaction of ( 1 ) with amines in the presence of H₂O₂ provided N⁴‐disubstituted‐N'⁴‐(2‐phenylquinazolin‐4‐yl)morpholin‐4‐carboximidamide via oxidative desulfurization. Estimation of reactivity sites on ( 1 ) was supported using the ab initio (HF/6‐31G**) quantum chemistry calculations. The ir, ¹H nmr, ¹³C nmr, mass spectroscopy and x‐ray identified the isolated products.     

Reactions of chlorofullerene C60Cl6 with N-substituted piperazines

It was shown for the first time that reactions of C₆₀ halides with aliphatic amines provide a facile route for the synthesis of aminofullerenes, valuable precursors for water-soluble cationic fullerene derivatives. Particularly, chlorofullerene C₆₀Cl₆ and N-substituted piperazines were investigated in this work. It was shown that substitution of chlorine atoms in C₆₀Cl₆ by amine groups is accompanied by partial elimination of addends from the fullerene cage that yields mixtures of di-, tetra- and, hexaaminofullerenes as the final products. Separation of these mixtures by column chromatography resulted in isolation of pure 1,4-diaminofullerenes; this procedure gives much higher and more reproducible yields of these compounds than direct oxidative photoaddition of secondary amines to C₆₀. ESI mass spectrometry and NMR spectroscopy data showed that hexaaminofullerene isomers are major components in inseparable mixtures of polyaddition products. Polyaminofullerenes were found to be readily soluble in aqueous acids; these solutions are unstable because of a facile substitution of protonated amine groups with hydroxyls. Nevertheless, the use of other amine substrates in the investigated reaction can potentially allow the preparation of more stable water-soluble cationic fullerene derivatives for biological studies.     

Oxidative nucleophilic substitution of hydrogen in nitroarenes with phenylacetic acid derivatives

Oxidative nucleophilic substitution of hydrogen (ONSH) in nitroarenes with carbanion of isopropyl phenyl acetate gives various products depending on the conditions and oxidant. The reaction carried out in liquid ammonia and KMnO₄ oxidant gives iso-propyl α-hydroxy-α-nitroarylphenylacetates formed via hydroxylation of the initial ONSH products. In some cases additionally dimeric, trimeric and tetrameric products are formed. In THF and Bu₄N⁺MnO₄⁻ or DDQ oxidants simple ONSH products are formed whereas oxidation by dimethyl dioxirane (DMD) gave iso-propyl hydroxyaryl phenyl acetates. The dimeric and trimeric products are apparently formed via coupling of nitrobenzylic radicals generated in course of oxidation with nitrobenzylic carbanions of the ONSH products.     

Palladium asymmetric reduction of β-carboline imines mediated by chiral auxiliaries assisted by microwave irradiation

An alternative synthetic approach for the introduction of chirality in β-carboline moiety through in situ reduction of N-acyliminium ion intermediates generated from imine 2 and chloroformate of 8-phenylmenthyl as chiral auxiliary was achieved. The method applied microwave-assisted irradiation and used PdCl₂/Et₃SiH protocol as a mild reducing agent, which decreased reaction times to minutes when compared to the conventional thermal reactions. The diastereoselectivity (4-12:1) of the reduction produced R-amines, which were assigned after chiral auxiliary removal and spectroscopic data compared to products obtained from Noyori asymmetric hydrogenation catalyst.     

Catalyst free,regioselective one-pot three-component synthesis of thiazol-2-imine derivatives in ionic liquid

A one-pot three-component approach for the synthesis of thiazol-2-imines has been described by the reaction of amine, phenyl isothiocyanate and β-nitroacrylate in [Hbim]BF₄ ionic liquid. The method is applicable for aromatic, benzylic, aliphatic and cyclic amines. Reusable reaction media, regioselectivity, mild reaction condition, catalyst free and high yield of products are the salient features of this protocol.     

Microwave‐Assisted Carbamoylation of Amines

The influence of microwave irradiation on the reaction of various amines with benzyl chloroformate and di‐tert‐butyl dicarbonate was investigated. Microwave irradiation was successfully applied to the carbamoylation of several nonfunctionalized and functionalized amines, including amino acids and nucleobases, leading to satisfactory to high product conversion within very short reaction times.     

Solvent effect on regioselectivity of epoxide ring opening in styrene oxide by O- and N-nucleophiles in neutral and basic media

The results of ring opening in styrene oxide by alcohols, amines, amino alcohols, and diamines were generalized. On low polarizing ability of the solvent, the main direction of the process is the formation of normal α-substituted products. The solvent effect on regioselectivity of the reaction was studied for N,N-diethylethylenediamine. The ratio of products correlates well with the value of dielectric constant for mixed aqueous-organic solvents and with the parameters of polarity E _T and AN for neat solvents.     

Functional polymethacrylates as bacteriostatic polymers

Two copolymers, P(PCEMA-co-MMA) and P(t-BMA-block-PCEMA), were prepared via ATRP using 2-(phenoxycarbonyloxy)ethyl methacrylate (PCEMA) as reactive monomer and methyl methacrylate (MMA) or tert-butyl methacrylate (t-BMA) as co-monomers. Alternatively phenoxycarbonyloxy decorated polymethacrylates were obtained via polymer analogous reaction: P(HEMA) was reacted with phenyl chloroformate to yield P(PCEMA). The highly reactive phenoxycarbonyloxy groups were used for polymer analogous reactions with nucleophiles to obtain polymers with ionic/hydrophilic and hydrophobic side groups. Different amines with long alkyl chains or tertiary amine groups were reacted with phenoxycarbonyloxy decorated polymers and subsequently reacted with methyl iodide to obtain amphipathic polymers with bacteriostatic properties.     

Polychloroformiate de vinyle: Support inerte de principes actifs,fixation et hydrolyse in vitro de sympathomimétiques

The chemical modification of poly(vinyl chloroformate) with sympathomimetics (phenyl ethylamine, ephedrine, p-hydroxyephedrine and p-hydroxymorephedrine) has been investigated. We have found convenient conditions to obtain soluble modified polymers with nearly quantitative substitution. The use of labelled compounds has shown that the rate and the yield of fixation on the polymer are independent of the nature of the amine. Kinetics in vitro of cleavage has shown that the rates of hydrolysis in stomacal, intestinal and enzymatic media are very low and similar; the observed variations seem to result from differences in solubility of the various modified polymers.     

Pyridazine Derivative and Related Compound,Part 18:1 Pyridazino [3′,4′:3,4]pyrazolo [5,1-c]-1,2,4-triazine-3-carboxylic Acid: Synthesis,Reactions, and Antimicrobial Activity

A series of 3-substituted pyridazino[3′,4′:3,4]pyrazolo[5,1-c]-1,2,4-triazens have been synthesized starting from the 3-carboxylic acid derivative 2. The reaction of the acid chloride 3 with amines gave the corresponding anilides 4. The reaction of 2 with ethyl chloroformate and sodium azide in the presence of triethyl amine gave the carbonyl azide 5, which underwent a Curtius rearrangement in boiling ethanol to afford the carbamate 6, which converted to the 3-amino derivative 7 upon alkaline hydrolysis, and the reaction with acid chloride resulted in N-substituted products 9. On other hand, the reaction of the carboxylic acid 2 with POCl₃ and thiosemicarbazide afforded 2-amino-1,3,4-thiadiazole derivative 13. The condensation of 13 with aldehydes furnished 14 in a good yield. The products were screened for their antimicrobial activity against six microorganisms.