Synthesis of Phenols: Organophotoredox/Nickel Dual Catalytic Hydroxylation of Aryl Halides with Water

A highly effective hydroxylation reaction of aryl halides with water under synergistic organophotoredox and nickel catalysis is reported. The OH group of the resulting phenols originates from water, following deprotonation facilitated by an intramolecular base group on the ligand. Significantly, aryl bromides as well as less reactive aryl chlorides served as effective substrates to afford phenols with a wide range of functional groups. Without the need for a strong inorganic base or an expensive noble‐metal catalyst, this process can be applied to the efficient preparation of diverse phenols and enables the hydroxylation of multifunctional pharmaceutically relevant aryl halides.     

Nitrogen-rich porous covalent imine network (CIN) material as an efficient catalytic support for C-C coupling reactions

In an effort to expand the realm of possibilities of nitrogen-rich porous materials that could be used in catalysis, herein we report the synthesis of a new highly nitrogen rich (ca. 45%) porous covalent imine network (CIN-1) material employing simple Schiff base chemistry and further grafting its surface with palladium. Pd-loaded CIN-1 support acts as a truly heterogeneous catalyst towards Suzuki C-C coupling reaction between aryl halides with arylboronic acids. High surface area and excellent accessibility of the catalytic sites make it very efficient for heterogeneous catalysis. The stability of the catalyst due to intimate contact between nitrogen-rich organic support and metal allows several reuses with only a minor loss in catalytic activity.     

Synthesis and Characterization of the 2‐Methylaminopyridine‐functionalized Polystyrene Resin‐supported Pd(II) Catalyst for the Mizoroki–Heck and Sonogashira Reactions in Water

A new polystyrene‐anchored Pd(II) pyridine complex is synthesized and characterized. This Pd(II) pyridine complex behaves as a very efficient heterogeneous catalyst in the Heck reaction of methyl acrylate with aryl halides and the Sonogashira reaction of terminal alkynes with aryl halides in water. Furthermore, the catalyst shows good thermal stability and recyclability. This polymer‐supported Pd(II) catalyst could easily be recovered by simple filtration of the reaction mixture and reused for more than five consecutive trials without a significant loss in its catalytic activity.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Visible‐Light‐Promoted Nickel‐ and Organic‐Dye‐Cocatalyzed Formylation Reaction of Aryl Halides and Triflates and Vinyl Bromides with Diethoxyacetic Acid as a Formyl Equivalent

A simple formylation reaction of aryl halides, aryl triflates, and vinyl bromides under synergistic nickel‐ and organic‐dye‐mediated photoredox catalysis is reported. Distinct from widely used palladium‐catalyzed formylation processes, this reaction proceeds by a two‐step mechanistic sequence involving initial in situ generation of the diethoxymethyl radical from diethoxyacetic acid by a 4CzIPN‐mediated photoredox reaction. The formyl‐radical equivalent then undergoes nickel‐catalyzed substitution reactions with aryl halides and triflates and vinyl bromides to form the corresponding aldehyde products. Significantly, besides aryl bromides, less reactive aryl chlorides and triflates and vinyl halides serve as effective substrates for this process. Since the mild conditions involved in this reaction tolerate a plethora of functional groups, the process can be applied to the efficient preparation of diverse aromatic aldehydes.     

Tributyltin Aryl Selenides as Efficient Arylselenating Agents. Synthesis of Diaryl and Aryl Organyl Selenides

Tributyltin aryl selenides are highly efficient arylselenating agents in reactions with aryl iodides and aryl triflates under catalysis with Pd and Ni complexes respectively. They also may be used as efficient source of active arylselenolate anion in the presence of fluoride ions in reaction of arylselenation of alkyl halides and activated aryl fluorides.     

Palladium(II)‐Initiated Catellani‐Type Reactions

The Catellani reaction is known as a powerful strategy for the expeditious synthesis of highly substituted arenes and benzo‐fused rings, which are usually difficult to access through traditional cross‐coupling strategies. It utilizes the synergistic interplay of palladium and norbornene catalysis to facilitate sequential ortho C?H functionalization and ipso termination of aryl halides in a single operation. In classical Catellani‐type reactions, aryl halides are mainly used as the substrates, and a Pd⁰ catalyst is required to initiate the reaction. Nevertheless, recent advances showcase that Catellani‐type reactions can also be initiated by a Pd^II catalyst with different starting materials instead of aryl halides via different reaction mechanisms and under different conditions. This emerging concept of Pd^II/norbornene cooperative catalysis has significantly advanced Catellani‐type reactions, thus enabling future developments of this field. In this Minireview, Pd^II‐initiated Catellani‐type reactions and their application in the synthesis of bioactive molecules are summarized.     

N,N,N',N'-四[(二苯基膦)甲基]乙二胺钯配合物催化Heck反应研究

以乙二胺为骨架的含氮四膦配体N’NN,N',N'-四[(二苯基膦)甲基]乙二胺和钯组成的催化体系用于丙烯酸酯和芳卤的Heck反应,该催化体系对许多卤代芳烃,尤其含吸电基的溴代芳烃显示了良好的催化活性.对活化底物对溴苯甲醛,即使底物与催化剂的物质的量比达到1000000,其转化率也能达到96％;催化非活化溴代芳烃对溴苯甲醚以及难以反应的氯代芳烃,在Pd含量为0.1 mol％时同样表现出优良催化性能.     

Carbonylative Suzuki coupling and alkoxycarbonylation of aryl halides using palladium supported on phosphorus‐doped porous organic polymer as an active and robust catalyst

Developing highly active catalysts with the combined advantages of molecular and solid catalysis is considered as the “Holy Grail” in the area of catalysis research. Herein, a phosphorus‐doped porous polymer‐immobilized palladium was successfully developed as an efficient, robust, and recyclable catalyst for the carbonylative Suzuki coupling and alkoxycarbonylation reactions of aryl halides. Rather than just as an immobilizing molecular catalyst, palladium supported on phosphorus‐doped porous organic polymer exhibits even better catalytic performances than that of its analogue homogeneous catalysts in both carbonylation reactions. Moreover, the catalyst can be easily separated and reused for at least 5 times without significant loss in reactivity. Importantly, the catalyst was highly stable under carbonylation reaction conditions, and no palladium nanoparticle was observed even after the 5th reuse.     

Mechanistic Study of Catalysis in the Mizoroki–Heck Reaction with Anhydrides of Aromatic Acids

A kinetic study of reaction of alkene arylation by anhydrides of aromatic acids (modified Mizoroki–Heck reaction) was carried out using differential selectivity as the main measured parameter. The results obtained under conditions of competition between a pair of alkenes or a pair of aromatic anhydrides point to the occurrence of the reaction via a homogeneous mechanism of catalysis analogously to a conventional variant of reaction with aryl halides as arylating reagents. The hypothesis that the active catalyst is homogeneous agrees with the results of kinetic studies of processes of catalyst formation and deactivation.     

Polystyrene-supported triphenylarsines: useful ligands in palladium-catalyzed aryl halide homocoupling reactions and a catalyst for alkene epoxidation using hydrogen peroxide

The utility of both soluble (non-cross-linked) and insoluble (cross-linked) polystyrene-supported triphenylarsine reagents were examined. These reagents were prepared by standard radical polymerization methodology and used in palladium-catalyzed homocoupling reactions of aryl halides. The insoluble reagent was also used as a catalyst precursor in heterogeneous alkene epoxidation reactions in which aqueous hydrogen peroxide was the stoichiometric oxidant. For the aryl halide homocoupling reactions, both reagents worked well and afforded similar results. Unhindered aryl iodides afforded the best yields in the shortest reaction times compared to aryl bromides. The epoxidation reactions of unfunctionalized alkenes were not very efficient. This was probably due to the hydrophobicity of the polystyrene matrix, which did not swell in the reaction medium. Thus, since a microporous, gel-type polystyrene matrix was used, the majority of the arsine groups were inaccessible to the reaction components and therefore incapable of participating in catalysis.     

Palladium-catalyzed amination of aryl halides on solid support

[reaction: see text] The first examples of the Pd(0)-catalyzed amination of aryl halides using Rink-resins as nitrogen source are described. Pd(2)dba(3)/BINAP/NaO-t-Bu was found to be the most efficient catalyst/base system, while a solvent mixture of dioxane and tert-butyl alcohol was shown to enhance the selectivity toward the desired monoarylation. Moderate to good yields and excellent purities of the amination products were found with electron-poor aryl halides, while electon-rich aryl halides failed to react under these conditions.     

Iron-catalyzed Grignard cross-coupling with alkyl halides possessing beta-hydrogens

Tris(acetylacetonato)iron(III) (Fe(acac)(3)) was found to be an efficient catalyst for the cross-coupling reaction between aryl Grignard reagents and alkyl halides possessing beta-hydrogens. The reaction is applicable to secondary alkyl halides as well as primary ones. [reaction: see text]     

Cobalt-catalyzed aminocarbonylation of (hetero)aryl halides promoted by visible light

The catalytic aminocarbonylation of (hetero)aryl halides is widely applied in the synthesis of amides but relies heavily on the use of precious metal catalysis. Herein, we report an aminocarbonylation of (hetero)aryl halides using a simple cobalt catalyst under visible light irradiation. The reaction extends to the use of (hetero)aryl chlorides and is successful with a broad range of amine nucleophiles. Mechanistic investigations are consistent with a reaction proceeding via intermolecular charge transfer involving a donor–acceptor complex of the substrate and cobaltate catalyst.

An aminocarbonylation of (hetero)aryl halides using a simple cobalt catalyst under visible light irradiation is presented.     

Pd(0)‐ S‐propyl‐2‐aminobenzothioate immobilized onto functionalized magnetic nanoporous MCM‐41 as efficient and recyclable nanocatalyst for the Suzuki,Stille and Heck cross coupling reactions

The present work describes the use of Pd(0)‐ S‐propyl‐2‐aminobenzothioate Complex immobilized onto functionalized magnetic nanoporous MCM‐41(Fe₃O₄@MCM‐41@Pd‐SPATB) as efficient and recyclable nano‐organometallic catalyst for C–C bond formation between various aryl halides with phenylboronic acid (Suzuki reaction), aryl halides with triphenyltin chloride (Stille reaction), and aryl halides with n‐butyl acrylate (Heck reaction). All the reactions were carried out in PEG‐400 as green solvent with short reaction time and good to excellent yields. This catalyst was characterized by FT‐IR spectroscopy, XRD, TGA, VSM, ICP‐OES, TEM, EDX and SEM techniques. Ease of operation, high efficiency, recovery and reusability for five continuous cycles without significant loss of its catalytic activities or metal leaching are the noteworthy features of the currently employed heterogeneous catalytic system.     

Heterogeneous Suzuki and Stille coupling reactions using highly efficient palladium(0) immobilized MCM-41 catalyst

An efficient palladium(0) immobilized MCM-41 catalytic system for C-C cross-coupling reaction has been developed. Ligand-free Pd(0)-MCM-41 catalyst can be successfully used in coupling reaction between various aryl halides including deactivated chlorobenzene with aryl borane and organotin to give biaryls in excellent yields with high turnover frequency (TOF) (the maximal TOFs are up to 6990 for the reaction of bromobenzene with phenylboronic acid). The catalyst can be recycled and reused without any loss of catalytic activity.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

An efficient Ullmann-type C-O bond formation catalyzed by an air-stable copper(I)-bipyridyl complex

An efficient O-arylation of phenols and aliphatic alcohols with aryl halides was developed that uses an air-stable copper(I) complex as the catalyst. This arylation reaction can be performed in good yield in the absence of Cs2CO3. A variety of functional groups are compatible with these reaction conditions with low catalyst loading levels.     

Synthesis of aryl azides from aryl halides promoted by Cu2O/tetraethylammonium prolinate

An efficient approach to aryl azides, in short reaction times and good to excellent yields, has been developed via the reaction of aryl halides with sodium azide under Cu₂O/tetraethylammonium prolinate catalysis.     

Palladium-catalyzed reactions of arylindium reagents prepared directly from aryl iodides and indium metal

Treatment of aryl iodides with indium metal in the presence of lithium chloride leads to the formation of an organoindium reagent capable of participating in cross-coupling reactions under transition-metal catalysis. Combination with aryl halides in the presence of 5 mol % Cl2Pd(dppf) furnishes biaryl compounds in good yields; similarly, reaction with acyl halides or allylic acetates/carbonates in the presence of 5-10 mol % palladium catalyst leads to arylketones and allylic substitution products, respectively, in moderate yields. The reactions are tolerant of the presence of protic solvents, and approximately 85% of the indium metal employed can be recovered by reduction of the residual indium salts with zinc(0).