CO2激光写入旋转折变型长周期光纤光栅的制作及理论分析

提出了一种光纤横截面折射率变化呈旋转非对称变化的长周期光纤光栅（R-LPFG） 结构,并利用多层圆波导理论和横截面折射率离散分析方法,结合模式耦合方程组和数值求解方法理论分析了这种光栅的模式耦合特征.理论分析表明R-LPFG纤芯基模主要与一阶非对称包层模发生耦合,当光栅旋转度逐渐变大时,R-LPFG基模会与一阶非对称包层模的奇模和偶模同时发生耦合,这就会使原来单一的谐振峰逐渐分裂成双峰,这是常规光栅类型所不具有的透射谱特征.由于R-LPFG的双峰来自同一对耦合模式,它们对温度的响应很相似,因此可利用双峰间 关键词： 光纤传感 光纤光栅 2激光')" href="#">CO₂激光 旋转折变     

Unique temperature sensing characteristics of CO2-laser-notched long-period fiber gratings

Long-period fiber gratings (LPFGs) are written by use of a focused CO₂ laser beam to notch periodically on the surface of optical fibers. Temperature characteristics of the CO₂-laser-notched LPFG are investigated in detailed to develop its sensing applications. It is shown that, for such LPFG, temperature sensitivity of resonant wavelength can be increased by creating deeper notches. The coupling from the fundamental core mode to a cladding mode in the LPFG can be enhanced by increasing the ambient temperature. The polarization-dependent loss (PDL) of the LPFG depends strongly on the ambient temperature. Such unique temperature characteristics can be used to solve the cross-sensitivity problem between the temperature and the tensile strain. So, the LPFG is a promising temperature sensor based on the wavelength modulation, on the intensity modulation and/or on the PDL modulation.     

Step-changed period chirped long-period fiber gratings fabricated by CO2 laser

A CO₂ laser and point-by-point method are used for fabricating step-changed period chirped long-period fiber gratings (LPFG). Several types of period chirped LPFGs have been demonstrated, such as, linearly chirp, peak-shape chirp, and cascaded linearly chirp. Unlike uniform LPFGs, the spectrum change such as multiple attenuation peaks, broader spectrum can be seen in these chirp gratings, and the spectral shape can be controlled by the grating period. Especially, the cascaded linearly chirped LPFGs performs a multi-peak as interference between the core mode and cladding mode, which can be used as multi-wavelength filters in fiber optic communication and fiber optic sensors. Also, a linear tuning range of 1.6 nm with -0.559 pm/με tuning rate is achieved in these types of devices by applying an axial strain.     

Tunable filter based on a pair of special long-period fiber gratings and its application in fiber ring laser

A filter based on a Mach-Zehnder interferometer (MZI) formed by cascading a pair of longperiod fiber gratings (LPFGs) written by CO₂ laser in a twisted single-mode fiber is proposed. The transmission spectrum of the filter is tuned by modifying the bending curvature of the MZI, and thus wavelength tuning is achieved. And a tunable erbium-doped fiber (EDF) ring laser employing the filter as a wavelengthselection component is experimentally demonstrated. The laser can be tuned continuously from 1573.05 to 1595.75 nm with a side-mode suppression ration of ∼50 dB over the total tuning range.     

基于新型长周期光纤光栅的掺铒光纤放大器

报道了基于高频CO₂激光脉冲写入的新型长周期光纤光栅的低噪音掺铒光纤放大器,这种新型长周期光纤光栅是用大约几千Hz的高频CO₂激光脉冲对光纤玻璃热冲击作用而形成的.在铒纤中插入一个长周期光纤光栅,会明显减少掺铒光纤放大器的放大自发辐射(ASE)噪音.报道了两种低噪音掺铒光纤放大器,作为前置放大器和线路放大器,它们的ASE噪音指数分别从4.0 dB减少到3.5 dB和从4.8 dB减少到4.3 dB,并且在作为线放时,其小信号增益从30 dB提高到37 dB,降噪及提高增益效应十分显著.     

基于双芯光纤耦合器的梳状滤波器及其CO2激光调节

基于光纤耦合器的波长特性,分析了光纤耦合器作为梳状滤波器的光谱特性;将长度不同的双芯光纤(twin-core fiber,TCF)熔接在两根单模光纤(single mode fibors,SMF)之间,实验制得具有不同峰值波长间隔的基于双芯光纤耦合器的全光纤型梳状滤波器,其消光比可达25 dB. 首次使用CO₂激光对其进行光谱调节,调节导致光谱向长波方向漂移和消光比的变化. 这种调节是基于CO₂与光纤相互作用时的残余应力释放和熔融变形机理,使用氢载TCF可以在相同实验参数下得到更大的波长调节激光. 关键词： 双芯光纤耦合器 梳状滤波器 2激光')" href="#">CO₂激光 残余应力     

CO2激光写入长周期光纤光栅的折变理论及实验研究

理论分析了利用高频CO₂激光脉冲在不同类型光纤中写入长周期光纤光栅（LPFG）时光纤包层和纤芯发生折射率改变的机理和计算方法.结果表明,残余应力释放、快速固化、光纤致密化和熔融变形是高频CO₂激光能成栅的主要原因,但采用不同的写入方法、不同的激光写入能量在不同的光纤类型上制作光栅时各种机理的重要性不同.利用长周期光纤光栅对构成的M-Z干涉仪实验测量了高频CO₂激光以不同辐射能量在光纤不同作用位置所引起的光纤纤芯或包层的折射率平均变化量,并通过实际制作光栅的过程来初步验证光纤折射率的变化情况.CO₂激光与光纤相互作用机理的分析和实验研究为利用这种方法制作折变型全光纤器件提供了实验制作的基础和完善工艺的方法. 关键词： 光纤器件 长周期光纤光栅 2激光脉冲')" href="#">CO₂激光脉冲 折变     

Higher-order core mode resonances in a mechanically induced long-period holey fiber grating

We present the spectral analysis of higher-order core mode resonances in a long period holey fiber grating induced mechanically in an asymmetric holey fiber. Calculations based on a fast-Fourier transform mode solver shows that the mode resonances obtained experimentally correspond to the odd- and even-LP_1,1 core modes. Additionally, we analyze the twist and polarization response of these mode resonances in the long period holey fiber grating. The results obtained in this work are of great importance in the design of new all-fiber optical devices that involve couplings of higher order core modes in asymmetric holey fibers.     

Mode field profile and polarization dependence of long period fiber gratings written by CO2 laser

Mode field profiles and polarization dependence in the CO₂-laser-notched long period fiber gratings (LPFGs) were investigated in detail. Asymmetric field profile was demonstrated in the 2- and 3-dimensional far field patterns of the CO₂-laser-notched LPFG, which experimentally verifies the previously-presented asymmetry of refractive index modulation within the cross section of the gratings. Polarization dependent loss (PDL) of the LPFG was measured via Mueller matrix method. The maximum PDL of 1.68 dB and the maximum polarization extinction ratio of 1.07 dB are observed in the LPFG.     

Arbitrarily switchable multi-wavelength Yb-doped fiber lasers with phase-shifted long-period fiber grating

An arbitrarily switchable multi-wavelength Yb-doped fiber laser (YDFL) based on a phase-shifted long-period fiber grating (PS-LPFG) is proposed and demonstrated. The PS-LPFG, which was fabricated by a CO₂ laser under asymmetric exposure, acts as a spectral filter with anisotropic transmission spectrum at different states of polarization. The capability of arbitrary wavelength switching can be attributed to the combination of the polarization-dependent loss (PDL) of the PS-LPFG and the nonlinear polarization rotation (NPR) effect. The method suggests a new possibility to achieve even more wavelengths output with an all-fiber format, arbitrarily switchable and tunable capability in the Yb-doped fiber laser system in a simple, stable and well controlled manner.     

基于超长周期光纤光栅的高灵敏度扭曲传感器

利用高频CO₂激光脉冲写入的周期达数毫米的超长周期光纤光栅(ULPFG)，实验研究了这种新型ULPFG的扭曲特性，发现它的某些高阶谐振波长漂移与扭曲率之间具有良好的线性关系和方向相关性，其灵敏度可达0.2244nm/(rad/m)，是高频CO₂激光脉冲写入法写入的普通LPFG扭曲灵敏度的4倍.初步的理论分析表明，新型ULPFG横截面折变的非对称性以及导模与高阶包层模之间发生的耦合使得扭曲具有方向相关性和很高的灵敏度.基于这种ULPFG独特的扭曲特性，设计了一种可 关键词： 光纤传感 光纤光栅 2激光')" href="#">CO₂激光 扭曲测量 双折射     

Investigation of impact of photonic crystal fiber structure modified by femtosecond laser micromachining on long period gratings׳ sensing characteristics

The sensing characteristics of long period gratings (LPGs) in photonic crystal fiber (PCF) can be changed by using femtosecond laser to modify the PCF waveguide structure although dispersive characteristic plays a key role in determining the sensitivity. Based on the coupled local-mode theory, the coupling behaviors and spectral characteristics of the LPGs in PCF fabricated by a femtosecond laser and a CO₂ laser are analyzed which are supported by experiment results. When the distance between the central of fiber core and the peak of the drilled hole, namely the micro-hole diameter is about 3.5 μm, the temperature and strain sensitivities are changed by 27% (from 6.20 to 7.81 pm/°C) and −21% (from −2.41 to −1.91 pm/με) in comparison with the changes of the sensitivities that is induced by CO₂ laser. The investigation demonstrates that the local structural changes of PCF have an impact on the sensitivity of LPGs. The investigation demonstrates the versatility of the technique in potential applications to design the desired sensitivity of fiber grating flexibly by forming proper geometrical modulations.     

Characteristics of the transmission spectrum of the long period fiber gratings based on the coupling of core mode to the higher order cladding modes

The characteristics of the transmission spectrum of the Long-period fiber gratings (LPFGs) based on the coupling of core mode to a higher order cladding mode (HE mode) are investigated using the coupled mode theory. This kind of LPFGs is different from that based on the coupling of core mode to a lower order cladding mode because of the effect of the coupling of core mode to EH cladding mode. When the cladding mode order is higher, the coupling coefficients of core mode to HE and EH cladding modes are comparable and both of the propagation constants of HE and EH cladding modes approach, so the spectrum has an additional loss peak. The bandwidth of LPFG based on the coupling of core mode to different cladding mode differs greatly. With the change of the mode orders from lower to higher, the transmission spectrum changes from narrow to wide and more narrow.     

基于少模长周期光纤叠栅的模式转换器

本文提出一种在同一段少模光纤上写入两个不同周期Λ1和Λ2的长周期光纤光栅构成叠栅的方法,实现了纤芯基模LP_(01)向高阶纤芯模LP_(11)模式转换的宽带宽的新型的全光纤模式转换器.利用有限元法和耦合模理论建立了模式转换器的理论分析模型.数值仿真分析了叠栅中两个子光栅周期间隔、光栅长度、耦合系数等光栅参数对模式转换器的影响.仿真分析和实验结果表明,通过改变两个子光栅的周期间隔来改变两个损耗峰的位置,形成一个损耗峰,从而可以实现宽带宽的模式转换器,其10dB带宽约是单栅的2倍.与传统的模式转换器相比,该转换器带宽宽、转换效率高,尺寸小、抗干扰能力强,可以在模分复用系统和光通信中得到广泛的应用.     

Coupling characteristics of high birefringence dual-core As2S3 rectangular lattice photonic crystal fiber

A type of As₂S₃ chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed. The dual-core photonic crystal fiber (PCF) consists of two asymmetric cores. The high polarization property and the coupling characteristics have been studied by using the finite element method and mode coupling theory. Numerical results show that the birefringence at wavelength λ = 10 μm is up to 0.01386 and the coupling length can reach wavelength λ = 5 μm, 261 μm and 271.44 μm for x-polarized mode and y-polarized mode, respectively. It demonstrates that a 6.786-mm-long fiber can exhibit an extinction ratio of better than -10 dB and a bandwidth of 180 nm.     

高频CO2激光脉冲写入超长周期光纤光栅特性研究

分析了高频CO₂激光脉冲写入的周期达数毫米的超长周期光纤光栅(ULPFG)的模式耦合特性，并在此基础上，简单分析了这种折射率变化主要在光纤包层，且沿光纤横截面呈非对称分布的ULPFG所具有的温度、应变、扭曲及环境折射率响应特性，并在文末做了实验验证，实验结果表明该ULPFG不同谐振峰具有不同的特性响应灵敏度，这与理论分析符合得较好.这些独特的光学特性将使得这种光纤光栅在光纤通信和光纤传感中具有应用价值. 关键词： 光纤传感 光纤光栅 2激光')" href="#">CO₂激光 超长周期光纤光栅     

Coupling to circularly asymmetric modes via long-period gratings made in a standard straight fiber

We demonstrate long-period fiber gratings made in a straight standard optical fiber via a CO₂ laser side irradiation that couples light between modes of different azimuthal symmetry. We show that such coupling can be even stronger than that to the azimuthally symmetric modes, provided the photoinduced asymmetry in the refractive index change across the fiber cross-section is high enough. This suggests that some previously-observed phenomena with CO₂-written LPGs not observed with other types of LPGs may be attributed to LPG resonances that couple light into the cladding modes with higher azimuthal symmetry. We show it on an example of bend-induced LPG resonance position tuning with the resonance depth maintained constant.     

长周期光纤光栅(LPFGs)的谱结构研究

利用相位匹配条件,从理论和实验上研究了均匀LPFGs的谱结构特点.结果表明,导模和不同包层模耦合产生的光谱特性有很大差别.在模序较小时,谱宽较小;模序增加,谱宽也增加;在某一模序附近,谱宽达到最大;以后随模序增加,谱宽迅速减小.给出了LPFGs中透射谱的最大损耗率及3 dB带宽与包层模序、光栅周期、耦合系数和栅长的关系.这些关系对设计满足特定最大损耗率和带宽的带阻滤波器或增益均衡器提供一种理论参考.选用不同的包层模、耦合系数和栅长,可以设计出谱宽很大或很小的LPFGs.     

Efficient coupling and relaxed alignment tolerances in pigtailing of a laser diode using dual ball lenses

In this paper, we report an efficient coupling scheme with relaxed misalignment tolerances. The proposed coupling scheme consists of two ball lenses of same diameter (1 mm) and different refractive indices. The second ball lens which is facing the fiber tip has a higher refractive index (1.833), whereas the first one which faces the laser diode has a refractive index of 1.5. Employing Gaussian and ABCD ray tracing optics, the theoretically obtained coupling efficiency can reach a unity with relaxed working distance (separation of the coupling system from the fiber tip) in the range between 1 and 4 mm at some optimum positions of the coupling lenses with regard to each other and to the facet of the laser diode. It has been found that if the distance between the first ball lens and the laser diode (d₁) is fixed at 1.1 mm, which is twice its focal length, the coupling efficiency and the working distance as well as the misalignment tolerances are greatly affected by variation of the separation between the two ball lenses (s), and for this proposed coupling scheme the highest coupling efficiency and largest working distance are obtained when s is in the range of 0.3-0.35 mm. Above and below this range there is a significant reduction in the values of the above-mentioned parameters. Experimentally, the Nd:YAG laser welding system has been used for the alignment and welding of the coupling components in a butterfly configuration; the experimentally obtained coupling efficiency of the proposed coupling system was around 75% with relaxed working distance. From the effect of lateral and angular offsets on coupling efficiency, it is clearly noticed that the mode field of laser diode is transformed from elliptical into circular and hence effectively matched with that of the single-mode fiber.     

A plasma effect in injection-mode selection of TEA CO2 lasers

We present experimental evidence obtained by a laser heterodyne technique for a chirp of about 10¹⁴ Hz/s in the cavity resonance during the pulse build-up time of a TEA CO₂ laser. The frequency sweep arises from the refractive-index contribution of the time-dependent electron density in the exciting discharge plasma. The phenomenon provides a mechanism, previously unexplained, for the extended and asymmetric mode selection zone in injection experiments.