An 8.1 W diode pumped solid-state quasi-continuous-wave yellow laser at 589 nm by intracavity sum-frequency mixing generation

We report an L-shaped symmetrical co-folding-arm plane-plane diode pumped solid-state yellow laser at 589 nm by using intracavity sum-frequency mixing. By carefully designing the cavity and employing various techniques to optimize the laser’s specifications, a quasi-continuous-wave (QCW) free-oscillation yellow laser source, which has an average output power of 8.1 W, a beam quality factor of M² = 2.3, and a repetition rate of 1.1 kHz, is developed. The generation of yellow laser at 589 nm is achieved by intracavity sum-frequency mixing between the laser lines at 1319 nm and 1064 nm of an Nd:YAG laser in a KTP crystal. To the best of our knowledge, the 8.1 W output at 589 nm is higher than any other diode pumped solid-state yellow laser generated by intracavity sum-frequency generation so far.     

Highly efficient Nd:GdVO4/BiBO laser at 456 nm under direct 880 nm diode laser pumping

The continuous-wave high-efficiency laser emission of Nd:GdVO₄ at the second-harmonic of 456 nm obtained by intracavity frequency doubling with an BiB₃O₆(BiBO) nonlinear crystal is investigated under pumping by diode laser at 880 nm into emitting level ⁴F_3/2. About 3.8 W at 456 nm with M² = 1.4 was obtained from a 5 mm-thick 0.4 at.% Nd:GdVO₄ laser medium and a 12 mm-long BiBO nonlinear crystal in a Z-type cavity for 13.9 W absorbed pump power. An optical-to-optical efficiency with respect to the absorbed pump power was 0.274. Comparative results obtained for the pump with diode laser at 808 nm, into the highly-absorbing ⁴F_5/2 level, are given in order to prove the advantages of the 880 nm wavelength pumping.     

Laser diode pumped actively Q-switched Nd:GdVO4 self-Raman laser operating at 1173 nm

A laser diode pumped actively Q-switched Nd:GdVO₄ self-Raman laser operating at 1173 nm is presented. The maximum output power was 2.26 W at an incident pump power of 18 W, with the corresponding optical conversion efficiency of 12.6%. Two different resonator configurations were investigated in order to achieve high output power and efficiency.     

High-efficiency direct-pumped Nd:YVO4-LBO laser operating at 671 nm

The continuous-wave high-efficiency laser emission from Nd:YVO₄ at the fundamental wavelength of 1342 nm and its 671 nm second harmonic obtained by intra-cavity frequency doubling in an LBO nonlinear crystal are investigated under pumping by diode laser at 880 nm (on the ⁴F_3/2→⁴I_13/2 transition). The end-pumped Nd:YVO₄ crystal yielded a continuous-wave output power of 9.6 W at 1342 nm for 18.9 W of absorbed pump power. The slope efficiency measured with respect to the absorbed pump power is 60%. An output of 5.5 W at 671 nm was obtained by frequency doubling, resulting in an optical-to-optical efficiency with respect to the absorbed pump power of 29%. Comparative results obtained for the pump with a diode laser at 808 nm (on the ⁴F_5/2→⁴I_13/2 transition) are given in order to prove the advantages of the 880 nm wavelength pumping.     

High-power, continuous-wave Ti:sapphire laser pumped by fiber-laser green source at 532 nm

We report the first experimental demonstration of efficient and high-power operation of a Ti:sapphire laser pumped by a simple, compact, continuous-wave (cw) fiber-laser-based green source. The pump radiation is obtained by direct single-pass second-harmonic-generation (SHG) of a 33 W, cw Yb-fiber laser in a 30-mm-long MgO:sPPLT crystal, providing 11 W of single-frequency green power at 532 nm in TEM₀₀ spatial profile with power and frequency stability better than 3.3% and 32 MHz, respectively, over 1 h. The Ti:sapphire laser is continuously tunable across 743-970 nm and can deliver an output power up to 2.7 W with a slope efficiency as high as 32.8% under optimum output coupling of 20%. The laser output has a TEM₀₀ spatial profile with M²<1.44 across the tuning range and exhibits a peak-to-peak power fluctuation below 5.1% over 1 h.     

Dual-wavelength high-power Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating

We report a high-power dual-wavelength Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating (FMFBG). The FMFBG was fabricated by using a piece of fiber in a length of fiber with a cutoff wavelength of 1225 nm, which supported two modes at 1060 nm. The laser was pumped by a fiber pigtailed laser diode working at 915 nm. Single-wavelength, dual-wavelength and triple-wavelength laser oscillations were observed when the fiber laser operated under different low pump powers. However, stable dual-wavelength operation was achieved at higher pump power of 3.9 W and remained unchanged until the output power reached 5.67 W under the maximum available pump power of 10.7 W. The laser wavelengths were centered at 1059.12 and 1060.80 nm with a full-width at half-maximum of 37 and 43 pm, respectively. The signal-to-noise-ratio was greater than 50 dB and the beam quality factor (M²) was about 1.9.     

Investigation of Nd:YVO4/YVO4 composite crystal and its laser performance pumped by a fiber coupled diode laser

Thermal effect control is critical to scale the output power of diode end-pumping solid lasers to several watts up and beyond. Diffusion bonding crystal has been demonstrated to be an effective method to relieve the thermal lens for the end-pumping laser crystal. The temperature distribution and thermal lens in Nd:YVO₄/YVO₄ composite crystal was numerically analyzed and compared with that of Nd:YVO4 crystal in this paper. The end-pumping Nd:YVO₄/YVO₄ composite crystal laser was set up and tested with z cavity. The maximum output power of 9.87 W at 1064 nm and 6.14 W at 532 nm were obtained at the pumping power of 16.5 W. The highest optical-optical conversion efficiencies were up to 60% at 1064 nm and 40% at 532 nm, respectively.     

High-power continuous-wave doubly resonant all-intracavity sum-frequency mixing deep blue laser at 447 nm

In this paper, a high-power continuous-wave deep blue laser at 447 nm with intracavity tripling was achieved. The deep blue laser at 447 nm is obtained by using a doubly cavity, and type-II critical phase matching KTP crystal for intracavity sum-frequency mixing. Through designing of the cavity, the optimum matching of modes and gains for the two wavelengths was obtained. With incident pump power of 30 W for the Nd:YVO₄ crystal and 16 W for the other Nd:YVO₄ crystal, the deep blue laser output of 3.5 W at 447 nm with TEM₀₀ mode was obtained, the beam quality M² value was equal to 1.8 in both horizontal and vertical directions at the maximum output power, and the power stability is better than 3% at the maximum output power during half an hour. The experimental results show that the intracavity sum-frequency mixing by doubly resonant is an effective method for high-power blue laser.     

Diode-pumped Nd:LuVO4-Nd:YLiF4 crystals blue laser at 489 nm by intracavity sum-frequency-mixing

We present a laser architecture to obtain continuous-wave blue radiation at 489 nm. An 809 nm diode-pumped the Nd:LuVO₄ crystal emitting at 916 nm. A part of the pump power was then absorbed by the Nd:LuVO₄ crystal. The remaining was used to pump the Nd:YLiF₄ (Nd:YLF) crystal emitting at 1047 nm. Intracavity sum-frequency mixing at 916 and 1047 nm was then realized in a LiB₃O₅ (LBO) crystal to reach the blue radiation. We obtained a continuous-wave output power of 425 mW at 489 nm with a pump laser diode emitting 18.4 W at 809 nm.     

Simultaneous dual-wavelength laser operation at 1342 and 946 nm in two laser crystals and their sum-frequency mixing

A sum-frequency yellow-green laser at 554.9 nm is reported by this paper, 946 nm wavelength is obtained from ⁴F_3/2-⁴I_9/2 transition in Nd:YAG and 1342 nm wavelength is obtained from ⁴F_3/2-⁴I_13/2 transition in Nd:YVO₄. Using a doubly folded-cavity type-II critical phase matching KTP crystal intra cavity to make 946 nm laser from Nd:YAG and 1342 nm laser from Nd:YVO₄ frequency summed, with incident pumped power of 30 W in Nd:YAG and 20 W in Nd:YVO₄, TEM₀₀ mode yellow-green laser at 554.9 nm at 1.15 W is obtained and its M² factor is less than 1.22. The experimental results show that the Nd:YAG and Nd:YVO₄ crystals intra-cavity sum-frequency mixing is an effective method for yellow-green laser and it can be applied to other two laser crystals to obtain more all-solid-state lasers with different wavelengths.     

LD end-pumped intracavity frequency doubled Yb:YAG laser

A laser diode end-pumped 10 at.% doped Yb:YAG microchip crystal intracavity frequency doubled all solid-stated green laser is reported in this paper. Using one plano-concave resonator, with the pump power of 1.2 W, 44.2 mW TEM₀₀ continuous wave (CW) laser at 525 nm was obtained, the optical conversion efficiency was about 3.7%. When a Cr:YAG crystal with initial transmission of 95.5% inserted in the resonator, the maximum output power of 6.4 mW, pulse duration width of 49.1 ns, pulse repetition rate of 2.45 kHz, and peak power of 53.1 W at 515 nm were achieved when the pump power was 1.2 W. The wavelength changed from 525 nm to 515 nm and the threshold was only 725 mW.     

3.62 W of continuous-wave orange-yellow light generated by intra-cavity sum-frequency mixing of Nd:YVO4

A design of laser-diode array (LDA) end-pumped Nd:YVO₄ laser that generates simultaneous laser action at wavelengths 1064 and 1342 nm is presented. Using type-I critical phase matching (CPM) BiB₃O₆, 593.5 nm continuous-wave (cw) Orange-yellow laser is obtained by 1064 nm and 1342 nm in an intra-cavity sum-frequency mixing. The maximum laser output power of 3.62 W is obtained when an incident pump laser of 27.5 W is used. The optical-to-optical conversion is up to 13.2%. To the best of our knowledge, this is the highest conversion efficiency at 593.5 nm in an intra-cavity sum-frequency Nd:YVO₄ laser.     

A comparative study of continuous laser operation on the F3/2-I9/2 transitions of Nd:GdVO4 and Nd:YVO4 crystals

A comparative study of Nd:GdVO₄ and Nd:YVO₄ crystal lasers pumped by a fiber-coupled diode array has been conducted at the ⁴F_3/2-⁴I_9/2 transitions wavelengths of 912 nm and 914 nm, as well as when intracavity frequency-doubled to 456 nm and 457 nm, respectively. At the fundamental wavelength of 912 nm and second harmonic wavelength of 456 nm, maximum output powers from the Nd:GdVO₄ crystal laser were 7.85 W and 4.6 W at a pump power of 29 W. All the results obtained from Nd:GdVO₄ were superior to those of Nd:YVO₄, indicating that Nd:GdVO₄ is a more efficient laser crystal than Nd:YVO₄ for laser operation on the ⁴F_3/2-⁴I_9/2 transitions.     

Continuous-wave high-power multi-pass pumped thin-disc Nd:GdVO4 laser

A thin-disc Nd:GdVO₄ laser in multi-pass pumping scheme was developed. Continuous-wave output power of 13.9 W at 1.06 μm for an absorbed power at 808 nm of 22 W was demonstrated from a 250-μm thick, 0.5-at.% Nd:GdVO₄ in a 4-pass pumping; the slope efficiency in absorbed power was 0.65, or 0.47 in input power. Output performances were also investigated under diode laser pumping at 879 nm, directly into the emitting ⁴F_3/2 level: maximum power of 3.6 W was obtained at 6.2 W of absorbed power with 0.69 slope efficiency. Compared with pumping at 808 nm, into the highly absorbing ⁴F_5/2 level, improvements of laser parameter in absorbed power (increase of slope efficiency, decrease of threshold) were obtained, showing the advantages of the pumping into the emitting level. However, the laser performances expressed vs. the incident power were modest owing to the low absorption efficiency at 879 nm. Thus, increased number of passes of the medium would be necessary in order to match the performances in input power obtained under 808-nm pumping.     

High efficiency generation of 355 nm radiation by extra-cavity frequency conversion

High efficiency extra-cavity third harmonic generation (THG) of 355 nm has been developed. A laser diode (LD) end-pumped, acoustic-optical Q-switched Nd:YAG laser was used as the fundamental wave source. With an input pump power of 25 W, average power of 6.75 W at 1064 nm was generated with the repetition rate 12 kHz and pulse duration 10 ns. Using the extra-cavity frequency conversion of three critical phase match (CPM) LiB₃O₅ (LBO) crystals, 3.2 W third harmonic radiation at 355 nm was obtained. The optical-to-optical (1064 nm to 355 nm) conversion efficiency was up to 47.4%.     

Diode-pumped passively Q-switched 912 nm Nd:GdVO4 laser and pulsed deep-blue laser by intracavity frequency-doubling

A diode-end-pumped passively Q-switched 912 nm Nd:GdVO₄/Cr⁴⁺:YAG laser and its efficient intracavity frequency-doubling to 456 nm deep-blue laser were demonstrated in this paper. Using a simple V-type laser cavity, pulsed 912 nm laser characteristics were investigated with two kinds of Cr⁴⁺:YAG crystal as the saturable absorbers, which have the different initial transmissivity (T_U) of 95% and 90% at 912 nm. When the T_U = 95% Cr⁴⁺:YAG was used, as much as an average output power of 2.8 W 912 nm laser was achieved at an absorbed pump power of 34.0 W, and the pulse width and the repetition rate were ∼ 40.5 ns and ∼ 76.6 kHz, respectively. To the best of our knowledge, this is the highest average output power of diode-pumped passively Q-switched Nd³⁺-doped quasi-three-level laser. Employing a BiBO as the frequency-doubling crystal, 456 nm pulsed deep-blue laser was obtained with a maximum average output power of 1.2 W at a repetition rate ∼ 42.7 kHz.     

Performance of a 80 W copper vapor laser with “alignment free” unstable CAT-EYE resonator and other configurations using intra-cavity apertures

Performance of a kinetically enhanced copper vapor laser (KE-CVL) with various stable/unstable “alignment free” CAT-EYE resonator configurations are presented here in this paper. The laser used in the experiment was a 45 mm bore (∼2 l discharge volume) kinetically enhanced copper vapor laser developed in our laboratory and capable of generating maximum power of ∼80 W (at ∼9.8 kHz). The efficiency of the laser was ∼1.4% and beam divergence of ∼3.5 mrad in a plane-plane standard multimode cavity. For the first time performance of unstable CAT-EYE resonator is demonstrated with a CVL/KE-CVL. On using unstable CAT-EYE resonator the divergence of the laser beam reduced to ∼0.22 mrad (∼20-fold reduction as compared to conventional plane-plane cavity), ∼40 W output power and with excellent misalignment tolerance. The laser output power was found to be within ∼5% drift/decline with misalignment angle of about 4 mrad between the mirrors. This is a significant improvement in comparison to standard conventional unstable resonator (M ∼ 50) CVL where ∼0.5 mrad divergence is achieved with power drift/decline of about 45% at ∼4 mrad misalignment angle.Off-axis unstable CAT-EYE unstable resonator was also demonstrated for the first time with further reduction in beam divergence to ∼0.13 mrad and with output power of ∼28 W. The misalignment tolerance was found to be highest in case of off-axis unstable CAT-EYE resonator with decline/drift in laser power of only ∼10% for misalignment angle as high as ∼8 mrad. Performance with intra-cavity apertures in plane-plane type CAT-EYE resonator for transverse mode control is also presented for the first time in CVLs. It is observed that the laser beam divergence reduces significantly to 1.25 mrad (a factor of 2) on using an aperture of ∼3.5 mm at the CAT-EYE reflector as compared to its normal (R = F = d) configuration without aperture. In case of stable CAT-EYE resonator the average beam divergence reduces from 8 mrad to 4 mrad (factor of 2) on using intra-cavity aperture of about 3 mm. It was also observed that high misalignment tolerance was retained on using intra-cavity apertures in almost all the CAT-EYE resonators. Use of intra-cavity mesh was also demonstrated for the first time with stable CAT-EYE resonator for improving the beam focus-ability. Average beam divergence was reduced by a factor of 2.5 (from 8 mrad to 3 mrad) on using intra-cavity mesh. These new configurations in CAT-EYE resonators in KE-CVLs are found to be effective in improving and controlling the laser beam divergence significantly with additional characteristic of high misalignment tolerance.     

800 mW/1484 nm highly efficient two-cascaded phosphosilicate Raman fiber laser pumped by Nd:YVO4 solid-state laser

Using 1064 nm CW Nd:YVO₄ solid-state laser as a pump, 1-km phosphosilicate fiber and cascaded cavities with two pairs of fiber Bragg grating mirrors for 1239 and 1484 nm, we obtained a CW 800 mW/1484 nm Raman fiber laser (RFL) for an actual incident pump power of about 2 W (Nd:YVO₄ power of 6.90 W). The conversion efficiency is as high as 40%. To the best of our knowledge, this is the highest conversion efficiency of RFL pumped by solid-state laser. The output power instability at 1484 nm in half an hour is less than 3%. In addition, the numerical simulations are also performed. Good agreement between the results of numerical simulation and the results of the experiment has been demonstrated.     

43 W picosecond laser and second-harmonic generation experiment

Combining the advantages of diode-end-pumped Nd: YVO₄ and diode-side-pumped Nd: YAG amplifiers, a high average power and high beam quality picosecond laser is designed. The system delivers a picosecond laser with average power of 43.4 W and good beam quality of M² < 1.7. By focusing the high power picosecond laser in LBO crystal, 532 nm green laser with maximal power of 20.8 W is generated and the conversion efficiency of second-harmonic generation reaches 56.4% when 17.7 W green laser obtained from the fundamental frequency laser with power of 31.4 W and beam quality of M² < 1.25.     

Compact 7.8-W 1-GHz-repetition-rate passively mode-locked TEM00 Nd:YVO4 laser under 880 nm diode direct-in-band pumping

We demonstrate a compact high-power passively mode-locked TEM₀₀ Nd:YVO₄ laser with 1 GHz repetition rate by 880 nm diode direct-in-band pumping. At the absorbed pump power of 19.9 W, a stable mode-locked output power of 7.8 W was obtained with the pulse width of 21.4 ps and a beam quality factor of M² < 1.5, corresponding to an optical-optical conversion efficiency of 39.2%.