Temperature characteristics of small signal gain for Nd/Cr:YAG ceramic lasers

Thermal dependence on the small signal gain of Nd/Cr:YAG (yttrium aluminum garnet) ceramics was observed experimentally. Usually, Nd:YAG crystal and ceramics have remarkable gain reduction when optical pumping is performed and the temperature of the laser media is upped to 373 K. A CW laser light generated in a 1064 nm Nd:YAG laser oscillator was amplified by Nd/Cr:YAG ceramic amplifier, and the output power was measured at non-saturation level. Laser small signal gain of the ceramic disk was kept to 470 K. This property was remarkably different from one of Nd:YAG crystals or ceramics. The peak shift of the fluorescence was observed experimentally when the temperature is high.     

Two-pass amplification of CW laser by Nd/Cr:YAG ceramic Active mirror under lamp light pumping

The concept of an Active mirror with transparent Nd/Cr:YAG ceramics is proposed. A new ceramic material pumped by an arc-metal-halide lamp has been experimentally implemented. CW-laser light generated in a 1064 nm Nd:YAG micro-tip oscillator was amplified by an Active mirror made of Nd/Cr:YAG ceramic and pumped by CW arc-lamp light. The saturation power density of the Nd/Cr:YAG ceramic was lower than that of Nd:YAG because the stimulated-cross-section and lifetime were effectively enhanced by the sensitization of Cr ions. The maximum output laser power while keeping spatial beam quality was up to 3 W with an input lamp power of 9 W; the resulting optical-optical conversion efficiency of 33% was close to the theoretical prediction of nearly 50%.     

678 nm RTP electro-optical Q-switched ceramic laser

The RTP electro-optical Q-switched ceramic laser at the wavelength of 678 nm with narrow pulse width is studied. We used the laser diode arrays side-pumped Nd:YAG ceramic crystal with 1.1 at% Nd doping and dimensions of Φ3 mm × 50 mm, designed folding cavity parameters, and discussed the variation of the beam radius in the ceramic crystal and frequency doubling crystal with the thermal focal length of ceramic crystal or KTP crystal. By using double RTP crystals as electro-optic Q-switch and KTP crystal type II phase matching for intracavity frequency-doubling, a narrow pulse width electro-optical Q-switched Nd:YAG ceramic laser was obtained. The output energy of 0.9 mJ and the pulse width of 41.6 ns at 678 nm are obtained at the repetition rate of 1000 Hz and pumped power of 144 W. The results formed the basis for the further development of the high power and high efficiency ceramic red laser.     

108 W Nd: YAG ceramic laser with birefringence compensation resonator

The quartz rotator's effective birefringence compensation for ceramic Nd:YAG rods has been first demonstrated. Furthermore, a high output power continuous-wave laser is presented based on an optimized resonator made up of four Nd:YAG ceramic rods. By an appropriate design of the resonator, an output power of 108 W at 1064 nm is obtained. The corresponding optical-to-optical conversion efficiency is 16.8% and the slope efficiency is 28.1%. Meanwhile, the numerical analysis for output power is detailed.     

High-power simultaneous dual-wavelength emission of an end-pumped Nd:YAG laser using the quasi-three-level and the four-level transition

An efficient continuous-wave (CW) simultaneous dual-wavelength lasing (SDWL) of an LD end-pumped Nd:YAG laser utilizing a quasi-three-level transition at 946 nm and a four-level transition at 1064 nm is reported. A theoretical model has been introduced to determine the threshold conditions for SDWL. The temperature distributions of a Nd:YAG crystal under different pump powers have been analyzed. In the experiments, a CW SDWL output power of 5.12 W at a temperature of 273 K has been achieved with a pump power of 17 W, giving a slope efficiency of 16.36%.     

A kilowatt level diode-side-pumped QCW Nd:YAG ceramic laser

We demonstrate a kilowatt level Quasi-continuous-wave (QCW) diode-side-pumped Nd:YAG ceramic laser at 1064 nm. The laser system adopts a master oscillator power amplifier scheme (MOPA). The master oscillator contains two diode-pumped laser modules. Under the pump power of 2000 W, an output power of 686 W was obtained. After amplified by an identical ceramic laser module, a maximum output power of 1020 W was obtained under a total incident pump power of 3433 W, corresponding to an optical-optical conversion efficiency of 29.7%. At the maximal output power, the repetition frequency was measured to be 1 kHz and the pulse width was 114 μs. To the best of our knowledge, this is the first time to realize QCW side-pumped Nd:YAG ceramic laser system with output power above 1 kW.     

Comparison of Nd:YAG Ceramic Laser Pumped at 885nm and 808nm

Laser performance of 1064 nm domestic Nd：YAG ceramic lasers for 885 nm direct pumping and 808 nm traditional pumping are compared. Higher slope efficiency of 34% and maximum output power of 16.5 W are obtained for the 885nm pump with a 6ram length 1 at.% Nd：YAG ceramic. The advantages for 885nm direct pumping are discussed in detail. This pumping scheme for highly doping a Nd：YAG ceramic laser is considered as an available way to generate high power and good beam quality simultaneously.     

Spectroscopic characterization of aluminum plasma using laser-induced breakdown spectroscopy

A detailed investigation of aluminum plasma induced by a 1064 nm Nd:YAG laser in air was performed. The emission of spectral lines arising from Al I transition at 396.07 nm, Al II transition at 358.46 nm, Al III transition at 360.72 nm and Al IV transition at 363.05 nm were well-resolved. The plasma parameters including electron temperature and electron density were determined through the Boltzmann plot method using the emission line intensities of the same ionized stages of aluminum atoms and the Stark-broadening profiles of Al II emission line, respectively. The temporal evolutions of the spectral lines belonging to atomic and ionic aluminum elements and the plasma parameters were investigated at three different laser pulse energies. Moreover, the validity of local thermodynamic equilibrium was elucidated in our experimental condition.     

Light scattering and 2-μm laser performance of Tm:YAG ceramic

The scattering effect of Tm:YAG ceramic has been investigated and the scattering coefficient at 1064 nm wavelength is measured to be 0.014 cm⁻¹. Furthermore, a high power Tm:YAG ceramic laser with a slope efficiency of 10.7% has been built, which is end-pumped at a central wavelength of 805 nm. The 2-μm maximum output power is 7.1 W with an optical-optical conversion efficiency of 7.2%.     

Surface modifications of AISI 1045 steel created by high intensity 1064 and 532 nm picosecond Nd:YAG laser pulses

Interaction of Nd:YAG laser, operating at 1064 or 532 nm wavelength and a pulse duration of 40 ps, with AISI 1045 steel was studied. Surface damage thresholds were estimated to be 0.30 and 0.16 J/cm² at the wavelengths of 1064 and 532 nm, respectively. The steel surface modification was studied at the laser energy density of 10.3 J/cm² (at 1064 nm) and 5.4 J/cm² (at 532 nm). The energy absorbed from Nd:YAG laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. The following AISI 1045 steel surface morphological changes and processes were observed: (i) both laser wavelengths cause damage of the steel in the central zone of irradiated area; (ii) appearance of a hydrodynamic feature in the form of resolidified droplets of the material in the surrounding outer zone with 1064 nm laser wavelength; (iii) appearance of periodic surface structures, at micro- and nano-level, with the 532 nm wavelength and, (iv) development of plasma in front of the target. Generally, interaction of laser beam with the AISI 1045 steel (at 1064 and 532 nm) results in a near-instantaneous creation of damage, meaning that large steel surfaces can be processed in short time.     

Influence of oxygen post-treatment on laser-induced damage of antireflection coatings prepared by electron-beam evaporation and ion beam assisted deposition

Antireflection coatings at the center wavelength of 1053 nm were prepared on BK7 glasses by electron-beam evaporation deposition (EBD) and ion beam assisted deposition (IBAD). Parts of the two kinds of samples were post-treated with oxygen plasma at the environment temperature after deposition. Absorption at 1064 nm was characterized based on surface thermal lensing (STL) technique. The laser-induced damage threshold (LIDT) was measured by a 1064-nm Nd:YAG laser with a pulse width of 38 ps. Leica-DMRXE Microscope was applied to gain damage morphologies of samples. The results revealed that oxygen post-treatment could lower the absorption and increase the damage thresholds for both kinds of as-grown samples. However, the improving effects are not the same.     

Quantitative studies of copper plasma using laser induced breakdown spectroscopy

In the present work, we present the spatial evolution of the copper plasma produced by the fundamental harmonic (1064 nm) and second harmonic (532 nm) of a Q-switched Nd:YAG laser. The experimentally observed line profiles of neutral copper have been used to extract the electron temperature using the Boltzmann plot method, whereas, the electron number density has been determined from the Stark broadening. Besides we have studied the variation of electron temperature and electron number density as a function of laser energy at atmospheric pressure. The Cu I lines at 333.78, 406.26, 465.11 and 515.32 nm are used for the determination of electron temperature. The relative uncertainty in the determination of electron temperature is ≈10%. The electron temperature calculated for the fundamental harmonic (1064 nm) of Nd:YAG laser is 10500–15600 K, and that for the second harmonic (532 nm) of Nd:YAG laser is 11500–14700 K at a Q Switch delay of 40 μs. The electron temperature has also been calculated as a function of laser energy from the target surface for both modes of the laser. We have also studied the spatial behavior of the electron number density in the plume. The electron number densities close to the target surface (0.05 mm), in the case of fundamental harmonic (1064 nm) of Nd:YAG laser having pulse energy 135 mJ and second harmonic (532 nm) of Nd:YAG laser with pulse energy 80 mJ are 2.50×10¹⁶ and 2.60×10¹⁶ cm⁻³, respectively.     

Surface modifications of a titanium implant by a picosecond Nd:YAG laser operating at 1064 and 532 nm

Interaction of an Nd:YAG laser, operating at 1064 or 532 nm wavelength and pulse duration of 40 ps, with titanium implant was studied. Surface damage thresholds were estimated to 0.9 and 0.6 J/cm² at wavelengths 1064 and 532 nm, respectively. The titanium implant surface modification was studied by the laser beam of energy density of 4.0 and 23.8 J/cm² (at 1064 nm) and 13.6 J/cm² (at 532 nm). The energy absorbed from the Nd:YAG laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. The following titanium/implant surface morphological changes were observed: (i) both laser wavelengths cause damage of the titanium in the central zone of the irradiated area, (ii) appearance of a hydrodynamic feature in the form of resolidified droplets of the material in the surrounding outer zone with the 1064 nm laser wavelength and (iii) appearance of wave-like microstructures with the 532 nm wavelength. Generally, both laser wavelengths and the corresponding laser energy densities can efficiently enhance the titanium/implant roughness. This implant roughness is expected to improve its bio-integration. The process of the laser interaction with titanium implant was accompanied by formation of plasma.     

Compact corner-pumped Nd:YAG/YAG composite slab laser

Corner-pumping is a new pumping scheme in diode-pumped all-solid-state lasers, having such advantages as high pump efficiency, favorable pump uniformity and low cost. Compact corner-pumped Nd:YAG/YAG composite slab lasers at 1064 nm with low or medium output powers and high efficiency are demonstrated in this paper. Combined with intracavity frequency doubling by a LBO crystal, a corner-pumped Nd:YAG/YAG composite slab 532 nm green laser with a stable output is realized successfully. The experimental results show that corner-pumping can reduce laser costs greatly, release the thermal effects of slab crystals and improve the output beam quality, and that the new pumping scheme is feasible in the design of diode-pumped all-solid-state lasers with low or medium output powers.     

660 nm单一波长Nd:YAG陶瓷激光器

 针对陶瓷晶体1319 nm的谱线设计了适合的谐振腔腔镜膜系参量,采用激光二极管列阵侧向抽运掺杂1.1at%、Φ3×50 mm的Nd:YAG陶瓷,利用色散棱镜及KTP晶体Ⅱ类匹配腔内倍频,研制了一台660 nm单一波长输出的高重频Nd:YAG陶瓷红光激光器.根据陶瓷晶体的热透镜焦距设计了谐振腔的各个参量,在重复频率为1000 Hz、单脉冲抽运能量约144 mJ时,获得了3.9 mJ的660 nm脉冲激光输出,总的光-光转换效率为2.71%.为进一步研究大功率、高效率的陶瓷红光激光器奠定了基础.     

Photoinduced effects in γ-glycine nanocrystallites embedded in polymer matrices

We have established a principal role of the polarity of polymer matrices on the piezooptical dispersion of the γ-glycine nanocrystallites embedded into the polymethymethacrylate (PMMA) and polycarbonate (PC) matrices. We found that the optical treatment by bicolor two laser beams at 1064 nm and 532 nm which are originating from the same 10 ns Nd:YAG laser, causes occurrence of the piezooptical effects. The optimal content of the γ-glycine nanocrystallites with respect to the magnitude of piezooptical coefficients was within the range of size 50-80 nm, corresponding to the 6.5 wt.%. We studied relaxation and spectral dependence of the corresponding coefficients of the piezooptic tensor.     

Room-temperature continuous wave laser oscillations in Nd:YAG ceramic waveguides produced by carbon ion implantation

We report on the generation of continuous wave lasers at a wavelength of ∼1064 nm in a Nd:YAG ceramic waveguide at room temperature. The waveguide was fabricated by using 6 MeV carbon ion implantation at a fluence of 3×10¹⁴ ions/cm². Laser operation has been realized with a slope efficiency as high as ∼11%. The pump threshold of an 808-nm laser beam for the waveguide laser oscillation is 19.5 mW.     

Compact low threshold Cr:YAG passively Q-switched intracavity optical parametric oscillator

We report a compact KTP-based intracavity optical parametric oscillator (IOPO) driven by a diode-end-pumped passively Q-switched Nd:YVO₄/Cr:YAG laser. For the first time, we take the thermal lens effect of the Cr:YAG into consideration and discuss its impact on the signal output. Diode pump threshold as low as 0.52 W has been achieved, which is the lowest result reported to date. At the incident diode pump power of 4 W, we obtained the maximum signal average and peak power of 358 mW and 12.5 kW, respectively, corresponding to a diode-to-signal conversion efficiency of 9%. Moreover, cavity-dumping characteristic and pulse transforming process from 1064 to 1573 nm are qualitatively analyzed.     

Laser pulses amplified by Nd/Cr:YAG ceramic amplifier using lamp and solar light sources

Laser pulses generated in a laser oscillator were amplified by Nd/Cr:YAG ceramic amplifiers. The saturation of output-laser energy was experimentally observed. We found that the stimulated emission cross-section of Nd/Cr:YAG ceramics was effectively increased and the saturation fluence was effectively reduced to 0.1 J/cm² due to the energy transfer between excited Cr and Nd ions. The output-laser energy we calculated was compared with the experimental ones and the extractable stored energy in the Nd/Cr:YAG ceramics was evaluated. This laser material is suitable for high-repetition-rate operations because of the high laser gain with low pumping intensity and low effective saturation fluence.     

Efficient tunable Yb:YAG ceramic laser

A high-power efficient ceramic Yb:YAG laser was demonstrated at a room temperature of 20 °C with an Yb concentration of 9.8 at.%, a gain medium of 1 mm, a pumping power of 13.8 W, an output coupler of T = 10%, and a cavity length of 20 mm. A 6.8 W cw output power was obtained with a slope efficiency of 72%. The ceramic Yb:YAG laser exhibited a continuous tunability in the spectral range of 63.5 nm from 1020.1 to 1083.6 nm for T = 1% at a maximum output power of 1.6 W. To the best of our knowledge, this is the first study of the tunability of ceramic Yb:YAG lasers, except crystal Yb:YAG studies.