纳米ZnO的制备及其在不同牺牲试剂下的光催化产氢性能

采用沉淀法与异相共沸蒸馏技术相结合制备了ZnO纳米粉体,并利用X射线粉末衍射、扫描电镜、透射电镜和液氮吸-脱附等技术对制备的样品进行了分析与表征．考察了Pt的负载量、煅烧温度以及牺牲试剂的种类和浓度对制备的纳米ZnO的光催化产氢效率的影响．结果表明：与其他温度下煅烧获得的产物相比,400 oC煅烧产物表现出最佳的光催化产氢效率,且以甲醇为牺牲试剂时纳米ZnO悬浮体系的光催化产氢效率远高于以三乙醇胺为牺牲试剂时的产氢效率．其原因在于光催化过程中甲醇氧化也对体系的产氢有贡献．此外,探讨了基于实验结果对含甲醇的     

Core/shell structured ZnO/SiO2 nanoparticles: Preparation, characterization and photocatalytic property

ZnO nanoparticles were prepared by a simple chemical synthesis route. Subsequently, SiO₂ layers were successfully coated onto the surface of ZnO nanoparticles to modify the photocatalytic activity in acidic or alkaline solutions. The obtained particles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS) and zeta potential. It was found that ultrafine core/shell structured ZnO/SiO₂ nanoparticles were successfully obtained. The photocatalytic performance of ZnO/SiO₂ core/shell structured nanoparticles in Rhodamine B aqueous solution at varied pH value were also investigated. Compared with uncoated ZnO nanoparticles, core/shell structured ZnO/SiO₂ nanoparticles with thinner SiO₂ shell possess improved stability and relatively better photocatalytic activity in acidic or alkaline solutions, which would broaden its potential application in pollutant treatment.     

Effects of NiTiO3 nanoparticles supported by mesoporous MCM-41 on photoreduction of methylene blue under UV and visible light irradiation

In this work, we report the synthesis of nickel titanate nanoparticles loaded on nanomesoporous MCM-41 nanoparticles to determine the effect of MCM-41 nanoparticles on the photocatalytic activities of nickel titanate (NiTiO₃) nanoparticles by using simple solid-state dispersion (SSD) method. Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and UV–Vis diffuse reflectance spectra (DRS) analysis were used to characterize the size and morphology of the obtained nanocomposite. The photocatalytic activity (PA) of the as-prepared NiTiO₃ loaded on MCM-41 was evaluated by degradation of the methylene blue under irradiation of UV and visible light. The results showed that NiTiO₃ loaded on nanosize MCM-41 has higher photocatalytic activity than that of NiTiO₃ nanoparticles.     

Visible-light photocatalytic degradation of methylene blue with laser-induced Ag/ZnO nanoparticles

The preparation of Ag doped ZnO nanoparticles conducted through the method of laser-induction is presented in this work. The Ag/ZnO nanoparticles attained from various weight percentages of added AgNO₃ relative to ZnO were applied under visible-light irradiation for evaluating the heterogeneous photocatalytic degradations of methylene blue (MB) solutions. It was shown that the catalytic behavior of Ag/ZnO nanoparticles in the visible-light range is notably improved through the Ag deposition onto ZnO nanoparticles by the method of laser-induction with a maximum effectiveness of 92% degradation. The properties of the nanoparticles were characterized by the employments of UV-vis spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and selected-area electron diffraction (SAED).     

Hydrothermal synthesis of manganese oxide and nitrogen doped graphene (NG-MnO2) nanohybrid for visible light degradation of methyl orange dye

MnO₂ nanoparticles and its nanocomposite with nitrogen-doped graphene (NG) have been fabricated via simple hydrothermal synthesis procedure using water as a solvent. X-ray diffraction (XRD) analysis of the as-prepared samples was used to ascertain the phase purity and crystallite size. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were employed to study the surface features and particle size of the synthesised samples. The photocatalytic ability of the methyl orange (MO) dye with bare MnO₂ and its hybrid with nitrogen-doped graphene (NG-MnO₂) wer compared with visible light prompted degradation of the dye in absence of these catalysts. The prepared nanohybrid (NG-MnO₂) showed improved photocatalytic efficacy as compared to the pure MnO₂ nanoparticles. The strong ferromagnetic character of nanohybrid helps in easy separation of catalyst even with a bar magnet.     

Photocatalytic degradation of azo dyes using Zn-doped and undoped TiO2 nanoparticles

Undoped and Zn-doped TiO₂ nanoparticles were synthesized by the sol gel method. The dopant (Zn) was taken at 0.1, 0.2, 0.5, 0.7, and 1.0 mol%. The initial precursors were titanium tetraisopropoxide and zinc acetate. The samples were characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and UV–vis diffuse reflectance. The photocatalytic activity of the prepared nanoparticles was studied by observing their role in degradation of two azo dyes, i.e., Eriochrome Black T and Methyl Red under UV–visible light. The results revealed that Zn-doped TiO₂ nanoparticles exhibited better degradation as compared to undoped TiO₂ nanoparticles. In this study, 0.7 mol% Zn-doped TiO₂ showed highest photocatalytic activity. Doping of Zn allowed better separation of electron–hole pairs which results in increased oxidation and reduction reactions.     

Low-temperature hydrothermal synthesis of highly photoactive mesoporous spherical TiO2 nanocrystalline

TiO₂ microspheres with mesoporous textural microstructures and high photocatalytic activity were prepared by hydrothermal treatment of mixed solution of titanium sulfate and urea with designed time. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and N₂ adsorption-desorption measurements. The photocatalytic activity was evaluated via the photocatalytic oxidation of acetone in air at room temperature. The results show that the hydrothermal time significantly influences on the morphology, microstructure and photocatalytic activity of the as-prepared samples. With increasing hydrothermal time, specific surface areas and pore volumes decrease, contrarily, the crystallite size and relative anatase crystallinity increase. The photocatalytic efficiency of the as-prepared samples is obviously higher than that of commercial Degussa P25 (P25) powders. Especially, the as-prepared TiO₂ powders by hydrothermal treatment for 7 h shows the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2 times.     

In situ Electron Microscopy Investigation of Fe(III)-doped TiO2 Nanoparticles in an Aqueous Environment

Three-dimensional networks of Fe(III)-doped TiO₂ nanoparticles (2–4 nm) prepared from organic precursors are detected by Cryo-TEM (transmission electron microscopy) in an aqueous environment. High-resolution TEM studies show that the nanoparticles prefer to align along their crystallographic orientation. A novel energy transfer mechanism is suggested in which these three-dimensional networks act as antenna systems thus leading to an enhanced photocatalytic activity of the colloidal preparations.     

Growth of branched rutile TiO2 nanorod arrays on F-doped tin oxide substrate

Branched rutile TiO₂ nanorod arrays were directly synthesized on the F-doped tin oxide (FTO) substrate through a two-step hydrothermal treatment by a seeding method with TiO₂-nanorods as seeds. The samples were characterized respectively by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and field-emission scanning electron microscopy (FESEM). Results showed that TiO₂ nanorods with nanobranches (TiO₂-NB) grew vertically on the FTO substrate. XRD and HRTEM results confirmed that the TiO₂-NB arrays were single-crystalline rutile. The optical properties of the samples were studied with a UV-vis spectrometer. The photocatalytic activity of the TiO₂-NB film is better than that of P25 particulate film. Direct electrical pathway and improved light-harvesting efficiency were crucial for the superior photocatalytic activity of the TiO₂-NB arrays.     

Graphene oxide based Pt-TiO2 photocatalyst: ultrasound assisted synthesis, characterization and catalytic efficiency

An ultrasound-assisted method was used for synthesizing nanosized Pt-graphene oxide (GO)-TiO₂ photocatalyst. The Pt-GO-TiO₂ nanoparticles were characterized by diffused reflectance spectroscopy, X-ray diffraction, N₂ BET adsorption-desorption measurements, atomic force microscopy and transmission electron microscopy. The photocatalytic and sonophotocatalytic degradation of a commonly used anionic surfactant, dodecylbenzenesulfonate (DBS), in aqueous solution was carried out using Pt-GO-TiO₂ nanoparticles in order to evaluate the photocatalytic efficiency. For comparison purpose, sonolytic degradation of DBS was carried out. The Pt-GO-TiO₂ catalyst degraded DBS at a higher rate than P-25 (TiO₂), prepared TiO₂ or GO-TiO₂ photocatalysts. The mineralization of DBS was enhanced by a factor of 3 using Pt-GO-TiO₂ compared to the P-25 (TiO₂). In the presence of GO, an enhanced rate of DBS oxidation was observed and, when doped with platinum, mineralization of DBS was further enhanced. The Pt-GO-TiO₂ catalyst also showed a considerable amount of degradation of DBS under visible light irradiation. The initial solution pH had an effect on the rate of photocatalytic oxidation of DBS, whereas no such effect of initial pH was observed in the sonochemical or sonophotocatalytic oxidation of DBS. The intermediate products formed during the degradation of DBS were monitored using electrospray mass spectrometry. The ability of GO to serve as a solid support to anchor platinum particles on GO-TiO₂ is useful in developing new photocatalysts.     

siRNA-loaded PEGylated porous silicon nanoparticles for lung cancer therapy

The BiPO₄/reduced graphene oxide (RGO) nanocomposites were prepared by a facile solvothermal approach. The prepared samples were characterized with Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy, electrochemical impedance spectra, and Mott–Schottky and the photoluminescence spectra. A large quantity of BiPO₄ nanoparticles with sizes of ca. 150 nm were well dispersed on the RGO nanosheets. The absorbance of the BiPO₄/RGO nanocomposites is largely enhanced in the range of 400–800 nm compared with that of BiPO₄, and the BiPO₄/RGO showed better photocatalytic activities under simulated sunlight irradiation than the BiPO₄ nanocrystals.     

Synthesis and characterization of MnWO4 nanoparticles encapsulated in mesoporous silica SBA-15 by fast microwave-assisted method

The MnWO₄ nanoparticles encapsulated in mesoporous silica (MnWO₄/SBA-15) was successfully synthesized by a fast microwave-assisted method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen absorption–desorption isotherm, and Fourier transform infrared spectroscopy (FTIR). Our results showed that the MnWO₄/SBA-15 nanocomposites have the ordered hexagonal meso-structure of SBA-15, indicating MnWO₄ nanoparticles were successfully distributed into the channels of SBA-15. The size of MnWO₄ nanoparticles in SBA-15 is significantly smaller than the size of MnWO₄ nanoparticles prepared without SBA-15, indicating that the MnWO₄/SBA15 nanocomposites would be very promising for improving photocatalytic activity of MnWO₄ nanoparticles.     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO₂纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO₂纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

Enhanced photocatalytic degradation of Safranin-O by heterogeneous nanoparticles for environmental applications

Nanostructure titanium dioxide (TiO₂) has been synthesized by hydrolysis of titanium tetrachloride in aqueous solution and Ag-TiO₂ nanoparticles were synthesized by photoreduction method. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier-transform infrared (FT-IR) and UV-vis absorption spectroscopy. The experimental results showed that the sizes of the synthesized TiO₂ and Ag-TiO₂ particles are in the range of 1.9-3.2 nm and 2-10 nm, respectively. Moreover, Ag-TiO₂ nanoparticles exhibit enhanced photocatalytic activity on photodegradation of Safranin-O (SO) dye as compared to pure TiO₂. The positive effect of silver on the photocatalytic activity of TiO₂ may be explained by its ability to trap electrons. This process reduces the recombination of light generated electron-hole pairs at TiO₂ surface and therefore enhances the photocatalytic activity of the synthesized TiO₂ nanoparticles. The effects of initial dye and nanoparticle concentrations on the photocatalytic activity have been studied and the results demonstrate that the dye photodegradation follows pseudo-first-order kinetics. The observed maximum degradation efficiency of SO is about 60% for TiO₂ and 96% for Ag-TiO₂.     

Facile in situ hydrothermal synthesis of BiVO4/MWCNT nanocomposites as high performance visible-light driven photocatalysts

Visible-light responsive monoclinic BiVO₄/MWCNT nanocomposites were facilely prepared via an in situ hydrothermal method by using sodium dodecyl sulfonate (SDS) as a guiding surfactant. The as-prepared BiVO₄/MWCNT nanocomposites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), the Fourier transform infrared spectroscopy (FTIR) and UV–vis diffuse reflectance spectroscopy. The results showed that the hydrothermal temperature and adding SDS had significant influence on the morphology and size of BiVO₄. The photocatalytic activities of BiVO₄/MWCNT nanocomposites were investigated by degrading methylene blue (MB) under visible-light irradiation. Remarkable enhancement in photodecomposition of MB was observed with BiVO₄/MWCNT composite compared with bare BiVO₄ particles. This improvement of photocatalytic was attributed to the effective charge transfer from BiVO₄ nanocrystals to MWCNT, which promoted the migration efficiency of photogenerated electron–hole. Furthermore, a possible mechanism for the photocatalytic oxidative degradation was also discussed.     

Photoactive materials prepared by homogeneous hydrolysis with thioacetamide: Part 2—TiO2/ZnO nanocomposites

Photocatalytic active titanium dioxide (TiO₂)/zinc oxide (ZnO) composite was prepared by homogeneous hydrolysis of a mixture of titanium oxo-sulphate and zinc sulphate in aqueous solutions with thioacetamide and subsequent annealing at the temperature of 600 °C. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission microscopy (HRTEM). Nitrogen adsorption-desorption was used for surface area (Brunauer-Emmett-Teller—BET) and porosity determination. The photoactivity of the prepared TiO₂/ZnO samples was assessed by the photocatalytic decomposition of Orange II dye in an aqueous slurry under irradiation of 254 and 365 nm wavelengths. Under the same conditions, the photocatalytic activity of a commercially available photocatalyst (Degussa P25), the pure anatase TiO₂ nanoparticles and cubic ZnO were examined.     

Preparation, characterization and photocatalytic activity of multi-walled carbon nanotube-supported tungsten trioxide composites

Multi-walled carbon nanotube (MWCNT)-supported tungsten trioxide (WO₃) composite catalysts were prepared by liquid-phase process. WO₃ nanoparticles grew on the inner and outer surface of MWCNTs. Their photocatalytic activities in the degradation of the Rhodamine B Dye were studied. The effects of mass ratio of MWCNTs to WO₃ were discussed. X-ray diffraction, field emission transmission electron microscopy, thermogravimetric-differential thermal analysis and ultraviolet-visible light absorption spectra were carried out to characterize the composite catalysts. The results indicated that the optimum mass ratio of MWCNTs to WO₃ is 5:100.     

Enhanced visible light photocatalytic properties of Fe-doped TiO2 nanorod clusters and monodispersed nanoparticles

In order to get photocatalysts with desired morphologies and enhanced visible light responses, the Fe-doped TiO₂ nanorod clusters and monodispersed nanoparticles were prepared by modified hydrothermal and solvothermal method, respectively. The microstructures and morphologies of TiO₂ crystals can be controlled by restraining the hydrolytic reaction rates. The Fe-doped photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis absorption spectroscopy (UV-vis), N₂ adsorption-desorption measurement (BET), and photoluminescence spectroscopy (PL). The refinements of the microstructures and morphologies result in the enhancement of the specific surface areas. The Fe³⁺-dopants in TiO₂ lattices not only lead to the significantly extending of the optical responses from UV to visible region but also diminish the recombination rates of the electrons and holes. The photocatalytic activities were evaluated by photocatalytic decomposition of formaldehyde in air under visible light illumination. Compared with P25 (TiO₂) and N-doped TiO₂ nanoparticles, the Fe-doped photocatalysts show high photocatalytic activities under visible light.     

Synthesis of Hierarchical (BiO)2CO3 Nanosheets Microspheres toward Efficient Photocatalystic Reduction of CO2 into CO

In this paper, hierarchical (BiO)₂CO₃ nanosheets microspheres were synthesized with dry ice as carbon source, and characterized by X-ray diffraction (XRD) patterns, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis diffuse reflectance spectra (DRS). The photocatalytic results showed that (BiO)₂CO₃ display much higher photocatalytic activity than BiOCl and TiO₂ for photocatalystic reduction of CO₂ under UV-visible light. The photocatalytic mechanism study revealled that (BiO)₂CO₃ display better separation efficiency of photoinduced charge carriers due to the large interlayer spacing (1.3675 nm).     

Effect of ambient pressure on the crystalline phase of nano TiO2 particles synthesized by a dc thermal plasma reactor

The synthesis of nanoparticles of titanium dioxide (TiO₂) with varying percentages of anatase and rutile phases is reported. This was achieved by controlling the operating pressure in a transferred-arc, direct current thermal plasma reactor in which titanium vapors are evaporated, and then exposed to ambient oxygen. The average particle size remained around 15 nm in each case. The crystalline structure of the as-synthesized nanoparticles of TiO₂ was studied with X-ray diffraction analysis; whereas the particle morphology was investigated with the help of transmission electron microscopy. The precursor species responsible for the growth of these nanoparticles was studied with the help of optical emission spectroscopy. As inferred from the X-ray diffraction analysis, the relative abundance of anatase TiO₂ was found to be dominant when synthesized at 760 Torr, and the same showed a decreasing trend with decreasing chamber pressure. The study also reveals that anatase TiO₂ is a more effective photocatalytic agent in degrading methylene blue by comparison to its rutile phase.