Optimal poroelastic layer sequencing for sound transmission loss maximization by topology optimization method

Optimal layer sequencing of a multilayered acoustical foam is solved to maximize its sound transmission loss. A foam consisting of air and poroelastic layers can be optimized when a limited amount of a poroelastic material is allowed. By formulating the sound transmission loss maximization problem as a one-dimensional topology optimization problem, optimal layer sequencing and thickness were systematically found for several single and ranges of frequencies. For optimization, the transmission losses of air and poroelastic layers were calculated by the transfer matrix derived from Biot's theory. By interpolating five intrinsic parameters among several poroelastic material parameters, distinct air-poroelastic layer distributions were obtained; no filtering or postprocessing was necessary. The optimized foam layouts by the proposed method were shown to differ depending on the frequency bands of interest.     

An axisymmetric poroelastic finite element formulation.

In the past, various two- and three-dimensional Cartesian, poroelastic finite element formulations have been proposed and demonstrated. Here an axisymmetric formulation of a poroelastic finite element is presented. The intention of this work was to develop a finite element formulation that could easily and efficiently model axisymmetric sound propagation in circular structures having arbitrary, axially dependent radii, and that are lined or filled with elastic porous sound absorbing materials such as foams. The formulation starts from the Biot equations for an elastic porous material expressed explicitly in axisymmetric form. By following a standard finite element development, a u-U formulation results. Procedures for coupling the axisymmetric elements to an adjacent acoustical domain are described, as are the boundary conditions appropriate for unfaced foams. Calculations described here show that the present formulation yields predictions as accurate as a Cartesian, three-dimensional model in much reduced time. Predictions made using the present model are also compared with measurements of sound transmission through cylindrical foam plugs, and the predicted results are shown to agree well with the measurements. Good agreement was also found in the case of sound transmission through a conical foam plug.     

Unified multiphase modeling for evolving,acoustically coupled systems consisting of acoustic,elastic, poroelastic media and septa

This paper presents a new modeling technique that can represent acoustically coupled systems in a unified manner. The proposed unified multiphase (UMP) modeling technique uses Biot’s equations that are originally derived for poroelastic media to represent not only poroelastic media but also non-poroelastic ones ranging from acoustic and elastic media to septa. To recover the original vibro-acoustic behaviors of non-poroelastic media, material parameters of a base poroelastic medium are adjusted depending on the target media. The real virtue of this UMP technique is that interface coupling conditions between any media can be automatically satisfied, so no medium-dependent interface condition needs to be imposed explicitly. Thereby, the proposed technique can effectively model any acoustically coupled system having locally varying medium phases and evolving interfaces. A typical situation can occur in an iterative design process. Because the proposed UMP modeling technique needs theoretical justifications for further development, this work is mainly focused on how the technique recovers the governing equations of non-poroelastic media and expresses their interface conditions. We also address how to describe various boundary conditions of the media in the technique. Some numerical studies are carried out to demonstrate the validity of the proposed modeling technique.     

声学二维平面周期结构的吸声性能建模

声学周期结构兼具优化室内声场环境,节约建筑吸声材料的特性而在现代建筑中广泛使用。针对二维平面周期结构的声场优化特性,建立了一种吸声系数计算模型。首先,根据边界条件理论推导了吸声系数的线性方程组,继而通过数值分析方法进行求解,最后在驻波管和混响室中分别进行实验验证。实验结果表明,测量的吸声系数和理论计算曲线吻合良好,该模型可以准确测算二维平面周期结构的吸声系数。同时分析表明:在平面周期结构中,相同吸声材料面积情况下,吸声材料占比越大,吸声效果越好;在相同吸声材料面积和占比情况下,材料边缘长度越长,高频段吸声效果越好;随着材料边缘长度的减少,边缘效应影响减弱。      

基于拓扑优化设计的宽频吸波复合材料

本文基于拓扑优化方法设计并制备了一种宽频吸波复合材料,该吸波复合材料由高强玻璃纤维透波板、电阻损耗型超材料、聚氨酯泡沫和碳纤维反射板组成.仿真及测试结果表明,该吸波复合材料在2–18 GHz频段内的平板反射率均小于-12 dB.并且由于采用高强玻璃纤维及碳纤维复合材料作为面板层,聚氨酯泡沫作为芯材,因此该吸波复合材料不仅在较宽频带内对电磁波具有高的吸收率,同时还具有质量轻、耐高温、耐低温、耐湿热、抗腐蚀等特点,便于实现吸波与力学性能及耐环境性能的兼容,具有一定的工程应用价值.     

Solid-perforated panel layout optimization by topology optimization based on unified transfer matrix

This paper presents a numerical method for the optimization of the sequencing of solid panels, perforated panels and air gaps and their respective thickness for maximizing sound transmission loss and/or absorption. For the optimization, a method based on the topology optimization formulation is proposed. It is difficult to employ only the commonly-used material interpolation technique because the involved layers exhibit fundamentally different acoustic behavior. Thus, an optimization method formulation using a so-called unified transfer matrix is newly proposed. The key idea is to form elements of the transfer matrix such that interpolated elements by the layer design variables can be those of air, perforated and solid panel layers. The problem related to the interpolation is addressed and bench mark-type problems such as sound transmission or absorption maximization problems are solved to check the efficiency of the developed method.     

Neural networks for prediction of acoustical properties of polyurethane foams

This paper presents a study of neural networks for prediction of acoustical properties of polyurethane foams. The proposed neural network model of the foam uses easily measured parameters such as frequency, airflow resistivity and density to predict multiple acoustical properties including the sound absorption coefficient and the surface impedance. Such a model is quite robust in the sense that it can be used to develop models for many different classes of materials with different sets of input and output parameters. The current neural network model of the foam is empirical and provides a useful complement to the existing analytical and numerical approaches.     

A geometry optimization framework for photonic crystal design

The performance of photonic crystal devices can depend strongly on their geometry. Alas, their fundamental physics offers relatively little by way of pointers in terms of optimum shapes, so numerical design search techniques must be used in an attempt to determine high performance layouts. We discuss strategies for solving this type of optimization problem, the main challenge of which is the conflict between the enormous size of the space of potentially useful designs and the relatively high computational cost of evaluating the performance of putative shapes. The optimization technique proposed here operates over increasing levels of fidelity, both in terms of the resolution of its non-parametric shape definition and in terms of the resolution of the numerical analysis of the performance of putative designs. This is a generic method, potentially applicable to any type of electromagnetic device shape design problem. We also consider a methodology for assessing the robustness of the optima generated through this process, investigating the impact of manufacturing errors on their performance. As an illustration, we apply this technology to the design of a two-dimensional photonic crystal structure; the result features a large complete band gap structure and a topology that is different from previously published designs.     

Shape and topology optimization based on the phase field method and sensitivity analysis

This paper discusses a structural optimization method that optimizes shape and topology based on the phase field method. The proposed method has the same functional capabilities as a structural optimization method based on the level set method incorporating perimeter control functions. The advantage of the method is the simplicity of computation, since extra operations such as re-initialization of functions are not required. Structural shapes are represented by the phase field function defined in the design domain, and optimization of this function is performed by solving a time-dependent reaction diffusion equation. The artificial double well potential function used in the equation is derived from sensitivity analysis. The proposed method is applied to two-dimensional linear elastic and vibration optimization problems such as the minimum compliance problem, a compliant mechanism design problem and the eigenfrequency maximization problem. The numerical examples provided illustrate the convergence of the various objective functions and the effect that perimeter control has on the optimal configurations.     

Effects of poroelastic coefficients on normal vibration modes in vocal-fold tissues

The vocal-fold tissue is treated as a transversally isotropic fluid-saturated porous material. Effects of poroelastic coefficients on eigenfrequencies and eigenmodes of the vocal-fold vibration are investigated using the Ritz method. The study demonstrates that the often-used elastic model is only a particular case of the poroelastic model with an infinite fluid-solid mass coupling parameter. The elastic model may be considered appropriate for the vocal-fold tissue when the absolute value of the fluid-solid mass coupling parameter is larger than 10(5) kg/m(3). Otherwise, the poroelastic model may be more accurate. The degree of compressibility of the vocal tissue can also been described by the poroelastic coefficients. Finally, it is revealed that the liquid and solid components in a poroelastic model could have different modal shapes when the coupling between them is weak. The mode decoupling could cause desynchronization and irregular vibration of the folds.     

斜坡补偿电流模式控制开关变换器的动力学建模与分析

降压型、升压型和升压-降压型DC-DC变换器是应用广泛的基本开关DC-DC变换器.电流模式控制开关DC-DC变换器在较宽的电路参数范围内具有两个边界,基于开关切换前后电感电流的上升和下降斜率,建立了斜坡补偿电流模式控制开关DC-DC变换器的统一模型.该模型进行无量纲归一化处理后只有三个参数,可有效展示开关DC-DC变换器在电感电流连续传导模式(CCM)和电感电流不连续传导模式(DCM)时的动力学特性.利用此模型,导出了轨道状态发生转移时的两个分界线方程,由此确定了开关DC-DC变换器的稳定周期1域、CCM鲁棒混沌域和DCM弱混沌强阵发域三个工作状态区域.开关DC-DC变换器二维参数映射图和电流模式控制降压型DC-DC变换器的电路实验观察验证了由两条分界线划分工作状态域的正确性.     

Reproducibility experiments on measuring acoustical properties of rigid-frame porous media (round-robin tests)

This paper reports the results of reproducibility experiments on the interlaboratory characterization of the acoustical properties of three types of consolidated porous media: granulated porous rubber, reticulated foam, and fiberglass. The measurements are conducted in several independent laboratories in Europe and North America. The studied acoustical characteristics are the surface complex acoustic impedance at normal incidence and plane wave absorption coefficient which are determined using the standard impedance tube method. The paper provides detailed procedures related to sample preparation and installation and it discusses the dispersion in the acoustical material property observed between individual material samples and laboratories. The importance of the boundary conditions, homogeneity of the porous material structure, and stability of the adopted signal processing method are highlighted.     

A generalized 2D FDTD model for photonic crystal fibers with frequency dependent media

A generalized model based on the two-dimensional finite-difference time-domain (2D FDTD) method for photonic crystal fibers (PCF) with frequency dependent media is presented. The Maxwell’s curl equations are formulated using flux density and the magnetic field. Auxiliary differential equations are used with complex-conjugate pole-residue pairs which incorporate the material dispersion of the dispersive media. The model is demonstrated to be a unified approach for arbitrary dispersive materials; therefore, it definitely reduces implementation cost when dealing with different frequency-dependent materials.     

小阻尼封闭空间声压级灵敏度分析与优化设计

本文研究了小阻尼界面封闭空间低频声学有限元分析、灵敏度分析和优化设计问题。分别用模态法和直接法计算了封闭空间内声压级响应，并推导了声压级响应对声空间边界形状控制参数的灵敏度分析公式，在此基础上建立了小阻尼空间声学问题的优化模型，同时给出了优化求解算法，并在JIFEX软件中进行了程序实现。本文提出的灵敏度分析和优化设计方法可以使声场的边界布局更为合理，从而达到改进小阻尼界面封闭空间声学性能的目的。数值算例验证了本文提出的灵敏度分析和优化算法的有效性。     

Optical detection of the absorption of acoustical phonons by a two-dimensional electron gas in a magnetic field

The effect of absorption of nonequilibrium acoustical phonons on the intensity of recombination of a two-dimensional electron gas in a magnetic field is investigated. The nonequilibrium acoustical phonons are emitted in the relaxation of electrons in a tunnel junction deposited on the back side of a sample with a two-dimensional electronic channel. It is demonstrated that the optical signal showing the intensity of the recombination of nonequilibrium electrons from a photoexcited size-quantization subband can serve as a sensitive detector of acoustical phonons. Because the general heating of two-dimensional carriers and the intersubband transitions stimulated by the absorption of nonequilibrium acoustical phonons lead to effects of different sign, the useful signal can be discriminated unambiguously. Pis’ma Zh. éksp. Teor. Fiz. 69, No. 1, 30–35 (10 January 1999)     

Microstructure based model for sound absorption predictions of perforated closed-cell metallic foams

Closed-cell metallic foams are known for their rigidity, lightness, thermal conductivity as well as their low production cost compared to open-cell metallic foams. However, they are also poor sound absorbers. Similarly to a rigid solid, a method to enhance their sound absorption is to perforate them. This method has shown good preliminary results but has not yet been analyzed from a microstructure point of view. The objective of this work is to better understand how perforations interact with closed-cell foam microstructure and how it modifies the sound absorption of the foam. A simple two-dimensional microstructural model of the perforated closed-cell metallic foam is presented and numerically solved. A rough three-dimensional conversion of the two-dimensional results is proposed. The results obtained with the calculation method show that the perforated closed-cell foam behaves similarly to a perforated solid; however, its sound absorption is modulated by the foam microstructure, and most particularly by the diameters of both perforation and pore. A comparison with measurements demonstrates that the proposed calculation method yields realistic trends. Some design guides are also proposed.     

Analysis of mode shapes of a rigidly backed cylindrical foam using three-dimensional finite element acoustical analysis

In this study, the three-dimensional finite element frequency domain acoustical analysis is used to determine the modal shapes of cylindrical foam with a rigid backing and subjected to a unit normal incidence impulsive sound pressure loading while placed in the impedance tube. The acoustic results predicted for the foam are validated by data from the two-microphone acoustic measurements, and good agreement between the measured and predicted acoustic results is observed. The mode shapes of the incident face of the foam at a low frequency, resonant and anti-resonant frequencies as well as the frequency that occurring the peak loss modulus are illustrated. It is found that the modal behaviors of the cylindrical foam are dominated by the fluid, although the acoustic properties of the cylindrical foam are also influenced by the circumferential edge constraints and the modal movements of the solid skeleton.     

A mode matching method for modeling dissipative silencers lined with poroelastic materials and containing mean flow

A mode matching method for predicting the transmission loss of a cylindrical shaped dissipative silencer partially filled with a poroelastic foam is developed. The model takes into account the solid phase elasticity of the sound-absorbing material, the mounting conditions of the foam, and the presence of a uniform mean flow in the central airway. The novelty of the proposed approach lies in the fact that guided modes of the silencer have a composite nature containing both compressional and shear waves as opposed to classical mode matching methods in which only acoustic pressure waves are present. Results presented demonstrate good agreement with finite element calculations provided a sufficient number of modes are retained. In practice, it is found that the time for computing the transmission loss over a large frequency range takes a few minutes on a personal computer. This makes the present method a reliable tool for tackling dissipative silencers lined with poroelastic materials.     

Sound absorption properties of a sunflower composite made from crushed stem particles and from chitosan bio-binder

A recent study investigated the mechanical, thermal and acoustical properties of a bio-based composite made from crushed particles of sunflower stalks binded together by chitosan, a bio-based binder. The acoustical performance in absorption was found to be poor as the material was highly compacted and with low porosity. The present study focuses on the acoustical properties of a higher porosity composite, with lower density while the mechanical rigidity remains fairly high. A higher absorption coefficient is obtained. The experimental results on the absorption coefficient are compared to the prediction of a model involving 5 physical parameters (porosity, tortuosity, airflow resistivity, thermal and viscous characteristic lengths). The characterization methods to determine these parameters are described. The comparison between experimental and theoretical results shows that this material exhibits peculiar microstructural features. It is found that the sound absorption properties can involve dead-end pores or clusters and multiple porosity scales in the material.     

Shape and topology optimization of compliant mechanisms using a parameterization level set method

In this paper, a parameterization level set method is presented to simultaneously perform shape and topology optimization of compliant mechanisms. The structural shape boundary is implicitly embedded into a higher-dimensional scalar function as its zero level set, resultantly, establishing the level set model. By applying the compactly supported radial basis function with favorable smoothness and accuracy to interpolate the level set function, the temporal and spatial Hamilton–Jacobi equation from the conventional level set method is then discretized into a series of algebraic equations. Accordingly, the original shape and topology optimization is now fully transformed into a parameterization problem, namely, size optimization with the expansion coefficients of interpolants as a limited number of design variables.Design of compliant mechanisms is mathematically formulated as a general optimization problem with a nonconvex objective function and two additionally specified constraints. The structural shape boundary is then advanced as a process of renewing the level set function by iteratively finding the expansion coefficients of the size optimization with a sequential convex programming method. It is highlighted that the present method can not only inherit the merits of the implicit boundary representation, but also avoid some unfavorable features of the conventional discrete level set method, such as the CFL condition restriction, the re-initialization procedure and the velocity extension algorithm. Finally, an extensively investigated example is presented to demonstrate the benefits and advantages of the present method, especially, its capability of creating new holes inside the design domain.