Biological effects of combined ultrasound and cisplatin treatment on ovarian carcinoma cells

The effects of low-power ultrasound, the anti-cancer drug cisplatin, and their combined application were studied in two lines of human ovarian carcinoma cells, A2780 and A2780cis. Four modes of treatment were used: exposure to ultrasonic field, application of cisplatin, exposure to ultrasound followed by cisplatin, and presence of cisplatin followed by exposure to application ultrasound. Ultrasound was used at intensities of 0.5 W/cm² and 1.0 W/cm² for 10 min, cisplatin was applied at concentrations of 1 μM and 6 μM per cell suspension treated in A2780 and cisplatin-resistant A2780cis cells, respectively. The results of each experimental treatment were assessed by the resultant cell viability related to the viability of control cells, using a standard MTT test. It was shown that a combined effect of ultrasound and cisplatin was more effective than that of ultrasound or cisplatin alone. It also appeared that the order of application played a role, with the cisplatin-ultrasound treatment lowering cell viability more than the ultrasound-cisplatin treatment. It can be assumed that the exposure of cells to a low-power ultrasonic field has an immediate effect on the structure of cell surfaces and, consequently, on entry of cisplatin into the cell.The study also included observations on changes in the cell cycle associated with the treatments used in both cell lines and their evaluation by flow cytometry.     

Sonodynamic inactivation of methicillin-resistant Staphylococcus aureus in planktonic condition by curcumin under ultrasound sonication

Methicillin-Resistant Staphylococcus aureus (MRSA) is an important cause of difficult-to-treat infections. The present study aims to investigate sonodynamic inactivation of MRSA in planktonic condition using curcumin under ultrasound sonication. Dark toxicity of curcumin to MRSA was investigated to choose the concentration range of curcumin used in the study. The uptake of curcumin in MRSA was observed before ultrasound sonication. After sonication colony forming units (CFUs) and bacterial viability were investigated using fluorescence assay. Additionally, chromosomal DNA fragmentation was also analyzed. Curcumin showed no dark toxicity to MRSA in the concentration range of ?500 μM. The maximum uptake of curcumin in MRSA occurred in 50 min after curcumin incubation. Counting of CFUs showed that curcumin had significantly sonodynamic killing effect on MRSA in a curcumin dose-dependent manner, and 5-log reduction in CFU was observed after curcumin treatment (40 μM) at room temperature in the dark for 50 min followed by exposure to ultrasound with intensity of 1.56 W/cm² for 5 min. The ratio of green-fluorescent intensity to red-fluorescent intensity was obviously decreased after curcumin treatment under ultrasound sonication. No significant change in chromosomal DNA was found in the cultured MRSA after the combined treatment of curcumin and ultrasound. These results demonstrated that sonodynamic action of curcumin had significant inactivation of MRSA in planktonic condition.     

Optimization of un-tethered, low voltage, 20-100kHz flexural transducers for biomedical ultrasonics applications

This paper describes optimization of un-tethered, low voltage, 20-100 kHz flexural transducers for biomedical ultrasonics applications. The goal of this work was to design a fully wearable, low weight (<100 g), battery operated, piezoelectric ultrasound applicator providing maximum output pressure amplitude at the minimum excitation voltage.Such implementation of ultrasound applicators that can operate at the excitation voltages on the order of only 10-25 V is needed in view of the emerging evidence that spatial-peak temporal-peak ultrasound intensity (I_SPTP) on the order of 100 mW/cm² delivered at frequencies below 100 kHz can have beneficial therapeutic effects. The beneficial therapeutic applications include wound management of chronic ulcers and non-invasive transdermal delivery of insulin and liposome encapsulated drugs.The early prototypes of the 20 and 100 kHz applicators were optimized using the maximum electrical power transfer theorem, which required a punctilious analysis of the complex impedance of the piezoelectric disks mounted in appropriately shaped metal housings.In the implementation tested, the optimized ultrasound transducer applicators were driven by portable, customized electronics, which controlled the excitation voltage amplitude and facilitated operation in continuous wave (CW) or pulsed mode with adjustable (10-90%) duty cycle. The driver unit was powered by remotely located rechargeable lithium (Li) polymer batteries. This was done to further minimize the weight of the applicator unit making it wearable. With DC voltage of approximately 15 V the prototypes were capable of delivering pressure amplitudes of about 55 kPa or 100 mW/cm² (I_SPTP). This level of acoustic output was chosen as it is considered safe and side effects free, even at prolonged exposure.     

Ultrasound treatment enhances cholesterol removal ability of lactobacilli

This study aimed to evaluate the effect of ultrasound treatment on the cholesterol removing ability of lactobacilli. Viability of lactobacilli cells was significantly increased (P < 0.05) immediately after treatment, but higher intensity of 100 W and longer duration of 3 min was detrimental on cellular viability (P < 0.05). This was attributed to the disruption of membrane lipid bilayer, cell lysis and membrane lipid peroxidation upon ultrasound treatment at higher intensity and duration. Nevertheless, the effect of ultrasound on membrane properties was reversible, as the viability of ultrasound-treated lactobacilli was increased (P < 0.05) after fermentation at 37 °C for 20 h. The removal of cholesterol by ultrasound-treated lactobacilli via assimilation and incorporation of cholesterol into the cellular membrane also increased significantly (P < 0.05) upon treatment, as observed from the increased ratio of membrane C:P. Results from fluorescence anisotropies showed that most of the incorporated cholesterol was saturated in the regions of phospholipids tails, upper phospholipids, and polar heads of the membrane bilayer.     

Cytotoxic effects and in vitro reversal of multidrug resistance by therapeutic ultrasound in human hepatocarcinoma cell line (HepG2)

Multidrug resistance (MDR) is one of the major obstacles to successful chemotherapy of human malignancies. Although many strategies have been explored to overcome MDR, none of them have been proven to be clinically useful until now. The aim of this study was to investigate whether a novel therapeutic ultrasound (US) approach would have useful effects on the reversal of MDR in cancer cells. Wild-type and MDR phenotype (HepG2/ADM) cells of the human hepatocarcinoma cell line HepG2 were exposed to 0.8 MHz US at an intensity of 0.43 W/cm² for a 9 s exposure (total energy density: 3.87 J/cm²). After US exposure, cell number and viability were counted immediately, and flow cytometry was performed to measure retention of rhodamine 123 and adriamycin in HepG2 and HepG2/MDR cells. Both cell lines were then incubated in suspension with adriamycin, vincristine, etoposide, cisplatin and 5-fluorouracil, respectively, and the MTT assay was used to determine cytotoxicity. The results showed that US exposure could significantly increase the uptake of Rh123 and ADM by HepG2/ADM tumor cells. The resistant index for the chemotherapeutic drugs was significantly lower in the US-exposed HepG2/ADM cells than in those not exposed to US. It was therefore concluded that US exposure could enhance the sensitivity of HepG2/ADM tumor cells to these chemotherapeutic agents, and the functional and structural changes induced by previous US exposure in MDR tumor cells may be responsible for it. However, further study is needed to investigate the mechanism behind US-mediated reversal of MDR.     

Removal of microbial biofilm on Water Hyacinth plants roots by ultrasonic treatment

The capacity of floating aquatic plants to purify sewage effluents drops rapidly as a result of biofouling processes that occur on the plant roots. This is due to the high concentration of microorganisms (MO) present in the wastewater. The possibility to apply low frequency (20 kHz) in sonification was examined under laboratory conditions. The ability of US to remove MO from the roots was studied using commercially available sonicators at intensity levels ranging from 2.7 W/cm² to 81.4 W/cm², (corresponding power levels ranging from 75 W to 500 W) while varying application periods between 5 and 60 min.The results show that MO can be removed effectively (up to 98%) by exposing the Eichhornia crassipes roots to US for 5 min at the intensity level of 64.5 W/cm². The efficiency of the wastewater treatment increased with exposure time and power input. The study proved that the US treatment is effective in removing MO that otherwise adhere to the roots, by more then two orders of magnitude.     

Investigation of the effect of power ultrasound on the nucleation of water during freezing of agar gel samples in tubing vials

Nucleation, as an important stage of freezing process, can be induced by the irradiation of power ultrasound. In this study, the effect of irradiation temperature (−2 °C, −3 °C, −4 °C and −5 °C), irradiation duration (0 s, 1 s, 3 s, 5 s, 10 s or 15 s) and ultrasound intensity (0.07 W cm⁻², 0.14 W cm⁻², 0.25 W cm⁻², 0.35 W cm⁻² and 0.42 W cm⁻²) on the dynamic nucleation of ice in agar gel samples was studied. The samples were frozen in an ethylene glycol-water mixture (−20 °C) in an ultrasonic bath system after putting them into tubing vials. Results indicated that ultrasound irradiation is able to initiate nucleation at different supercooled temperatures (from −5 °C to −2 °C) in agar gel if optimum intensity and duration of ultrasound were chosen. Evaluation of the effect of 0.25 W cm⁻² ultrasound intensity and different durations of ultrasound application on agar gels showed that 1 s was not long enough to induce nucleation, 3 s induced the nucleation repeatedly but longer irradiation durations resulted in the generation of heat and therefore nucleation was postponed. Investigation of the effect of ultrasound intensity revealed that higher intensities of ultrasound were effective when a shorter period of irradiation was used, while lower intensities only resulted in nucleation when a longer irradiation time was applied. In addition to this, higher intensities were not effective at longer irradiation times due to the heat generated in the samples by the heating effect of ultrasound. In conclusion, the use of ultrasound as a means to control the crystallization process offers promising application in freezing of solid foods, however, optimum conditions should be selected.     

Fluorescence response of human HER2+ cancer- and MCF-12F normal cells to 200MHz ultrasound microbeam stimulation: a preliminary study of membrane permeability variation

Targeted mechanical cell stimulation has been extensively studied for a better understanding of its effect on cellular mechanotransduction signaling pathways and structures by utilizing a variety of mechanical sources. In this work, an ultrasound-driven single cell stimulation method is thus proposed, and a preliminary study is carried out by comparing the fluorescence intensities representing a change in cell membrane permeability between MDA-MB-435 human HER2+ cancer cells (∼40-50 μm in diameter) and MCF-12F normal cells (∼50-60 μm) in the presence of ultrasound. A 200 MHz single element zinc oxide (ZnO) transducer is employed to generate ultrasound microbeam (UM) whose beamwidth and depth of focus are 9.5 and 60 μm, comparable to typical cell size. The cells in tetramethyl rhodamine methyl ester (TMRM) are interrogated with 200 MHz sinusoidal bursts. The number of cycles per burst is 5 and the pulse repetition frequency (PRF) is 1 kHz. The temporal variation of fluorescence intensity in each cell is measured as a function of input voltage to the transducer (16, 32, and 47 V), and its corresponding fluorescence images are obtained via a confocal microscope. A systematic method for visualizing UM’s focus by adding Rhodamine B to the immersion medium is also proposed to enhance the precision in aiming the beam at an individual cell.Both types of cells exhibit a decrease in the intensity upon UM irradiation. In particular, normal cells show more fluorescence reduction (down to 0.7 in normalized intensity) than cancer cells (∼0.9) under the same excitation condition of the transducer. With UM being turned off, the normalized intensity level in normal cells is slowly increased to 1.1. The cell images taken before and after UM exposure indicate that the intensity reduction is more pronounced in those cells after exposure. Hence the results show the potential of UM as a non-invasive in vitro stimulation tool for facilitating targeted drug delivery and gene transfection as well as for studying cellular mechanotransduction.     

Electrical, structural and surface morphological properties of thermally stable low-resistance W/Ti/Au multilayer ohmic contacts to n-type GaN

A W/Ti/Au multilayer scheme has been fabricated for achieving thermally stable low-resistance ohmic contact to n-type GaN (4.0 × 10¹⁸ cm⁻³). It is shown that the as-deposited W/Ti/Au contact exhibits near linear I-V behaviour. However, annealing at temperature below 800 °C the contacts exhibit non-linear behaviour. After annealing at a temperature in excess of 850 °C, the W/Ti/Au contact showed ohmic behaviour. The W/Ti/Au contact produced specific contact resistance as low as 6.7 × 10⁻⁶ Ω cm² after annealing at 900 °C for 1 min in a N₂ ambient. It is noted that the specific contact resistance decreases with increase in annealing temperature. It is also noted that annealing the contacts at 900 °C for 30 min causes insignificant degradation of the electrical and thermal properties. It is further shown that the overall surface morphology of the W/Ti/Au stayed fairly smooth even after annealing at 900 °C. The W/Ti/Au ohmic contact showed good edge sharpness after annealing at 900 °C for 30 min. Based on the Auger electron spectroscopy and glancing angle X-ray diffraction results, possible explanation for the annealing dependence of the specific contact resistance of the W/Ti/Au contacts are described and discussed.     

Sonodynamic action of pyropheophorbide-a methyl ester induces mitochondrial damage in liver cancer cells

Sonodynamic therapy with pyropheophorbide-a methyl ester (MPPa) presents a promising aspect in treating liver cancer. The present study aims to investigate the mitochondrial damage of liver cancer cells induced by MPPa-mediated sonodynamic action. Mouse hepatoma cell line H₂₂ cells were incubated with MPPa (2 μM) for 20 h and then exposed to ultrasound with an intensity of 0.97 W/cm² for 8 s. Cytotoxicity was investigated 24 h after sonodynamic action using MTT assay and light microscopy. Mitochondrial membrane potential (ΔΨm) was analyzed using flow cytometry with rhodamine 123 staining and ultrastructural changes were observed using transmission electron microscopy (TEM).The cytotoxicity of MPPa-mediated SDT on H₂₂ cell line was 73.00 ± 3.42%, greater than ultrasound treatment alone (28.12 ± 5.19%) significantly while MPPa treatment alone had no significant effect on H₂₂ cells. Moreover, after MPPa-mediated SDT cancer cells showed swollen mitochondria under TEM and a significant collapse of mitochondrial membrane potential. Our findings demonstrated that MPPa-mediated SDT could remarkably induce cell death of H₂₂ cells, and highlighted that mitochondrial damage might be an important cause of cell death induced by MPPa-mediated SDT.     

Heart ablation using a planar rectangular high intensity ultrasound transducer and MRI guidance

The aim of this study was to evaluate a flat rectangular (3 × 10 mm²) MRI compatible transducer operating at 5 MHz. The main task was to explore the feasibility of creating deep lesions in heart at a depth of at least 15 mm. The size of thermal necrosis in heart tissue was estimated as a function of power and time using a simulation model. The system was then tested in an excised lamb heart. In this study, we were able to create lesions of 15 mm deep with acoustic power of 6 W for an exposure of approximately 1 min. The contrast to noise ratio (CNR) between lesion and heart tissue was evaluated using fast spin echo (FSE). The CNR value was approximately 22 using T1 W FSE. Maximum CNR was achieved with repetition time (TR) between 300 and 800 ms. Using T2W FSE, the corresponding CNR was approximately 13 for the 14 in vivo experiments. The average lesion depth was 11.93 mm with a standard deviation of 0.62 mm. In vivo irradiation conditions were 6 W for 60 s. The size of the lesion in the other two dimensions was close to 3 × 10 mm² (size of the transducer element).     

Resonantly enhanced three-photon excitation spectra of lithium

We present the first measurement on the resonantly enhanced three-photon excitation spectra of natural lithium using a Nd:YAG laser pumped dye laser in conjunction with a thermionic diode ion detector. Exploiting the linear and circular polarizations, the np ²P_3/2(8 ? n ? 11) and nf  ²F_7/2 (8 ? n ? 38) series have been observed via three-photon excitation from the ground state. The measured level energies reveal a dynamic shift from calculated values, which increases with an increase of the principal quantum number n. The ac stark shift and line broadening mechanisms are studied as a function of laser intensity. It is noted that the width increases and the line center shifts towards the higher energy side as the laser intensity is increased. The maximum observed shift for the 12f ²F_7/2 line is 0.33 cm⁻¹ corresponding to the laser intensity variation from 1.34 × 10¹² W/m² to 1.03 × 10¹³ W/m², whereas its width increases from 0.36 cm⁻¹ to 0.82 cm⁻¹.     

Photoluminescence spectra of thin films containing CdSe/ZnS quantum dots irradiated by 532-nm laser radiation and gamma-rays

We have investigated temporal behavior of the photoluminescence (PL) spectra of thin films containing CdSe/ZnS quantum dots irradiated by 532 nm laser radiation and gamma-rays. Under ∼100 W/cm² laser radiation, the PL intensity (I_PL) increases with irradiation time upto about 500 s and thereafter declines linearly. The wavelength of the PL emission (λ_peak) exhibits a blue-shift with exposure time. Upon simultaneous irradiation by 100 W/cm² 532-nm laser, as well as 0.57 and 1.06 MeV gamma-rays, the temporal behaviors of both I_PL and λ_peak are significantly different; I_PL increases to a saturation level, and the magnitude of the blue-shift in λ_peak is reduced. We discuss possible mechanisms underlying these results.     

Partial crystallization of silicon by high intensity laser irradiation

Commercial single crystal silicon wafers and amorphous silicon films piled on single crystal silicon wafers were irradiated with a femtosecond pulsed laser and a nanosecond pulsed laser at irradiation intensities between 10¹⁷ W/cm² and 10⁹ W/cm². In the single crystal silicon substrate, the irradiated area was changed to polycrystalline silicon and the piled silicon around the irradiated area has spindly column structures constructed of polycrystalline and amorphous silicon. In particular, in the case of the higher irradiation intensity of 10¹⁶ W/cm², the irradiated area was oriented to the same crystal direction as the substrate. In the case of the lower irradiation intensity of 10⁸ W/cm², only amorphous silicon was observed around the irradiated area, even when the target was single crystal silicon. In contrast, only amorphous silicon particles were found to be piled on the amorphous silicon film, irrespective of the intensity and pulse duration.Three-dimensional thermal diffusion equation for the piled particles on the substrate was solved by using the finite difference methods. The results of our heat-flow simulation of the piled particles almost agree with the experimental results.     

Osteogenic differentiation of rat bone marrow stromal cells by various intensities of low-intensity pulsed ultrasound

Bone growth and repair are under the control of biochemical and mechanical signals. Low-intensity pulsed ultrasound (LIPUS) stimulation at 30 mW/cm² is an established, widely used and FDA approved intervention for accelerating bone healing in fractures and non-unions. Although this LIPUS signal accelerates mineralization and bone regeneration, the actual intensity experienced by the cells at the target site might be lower, due to the possible attenuation caused by the overlying soft tissue. The aim of this study was to investigate whether LIPUS intensities below 30 mW/cm² are able to provoke phenotypic responses in bone cells. Rat bone marrow stromal cells were cultured under defined conditions and the effect of 2, 15, 30 mW/cm² and sham treatments were studied at early (cell activation), middle (differentiation into osteogenic cells) and late (biological mineralization) stages of osteogenic differentiation. We observed that not only 30 mW/cm² but also 2 and 15 mW/cm², modulated ERK1/2 and p38 intracellular signaling pathways as compared to the sham treatment. After 5 days with daily treatments of 2, 15 and 30 mW/cm², alkaline phosphatase activity, an early indicator of osteoblast differentiation, increased by 79%, 147% and 209%, respectively, compared to sham, indicating that various intensities of LIPUS were able to initiate osteogenic differentiation. While all LIPUS treatments showed higher mineralization, interestingly, the highest increase of 225% was observed in cells treated with 2 mW/cm². As the intensity increased to 15 and 30 mW/cm², the increase in the level of mineralization dropped to 120% and 82%. Our data show that LIPUS intensities lower than the current clinical standard have a positive effect on osteogenic differentiation of rat bone marrow stromal cells. Although Exogen™ at 30 mW/cm² continues to be effective and should be used as a clinical therapy for fracture healing, if confirmed in vivo, the increased mineralization at lower intensities might be the first step towards redefining the most effective LIPUS intensity for clinical use.     

Ultrasound induces cellular destruction of nasopharyngeal carcinoma cells in the presence of curcumin

Objectives

Curcumin, a natural pigment from the traditional Chinese herb, has shown promise as an efficient enhancer of ultrasound. The present study aims to investigate ultrasound-induced cellular destruction of nasopharyngeal carcinoma cells in the presence of curcumin in vitro.

Methods

Nasopharyngeal carcinoma cell line CNE2 cells were incubated by 10 μm curcumin and then were treated by ultrasound for 8 s at the intensity of 0.46 W/cm². Cytotoxicity was evaluated using MTT assay and light microscopy. Mitochondrial damage was analyzed using a confocal laser scanning microcopy with Rhodamine 123 and ultrastructural changes were observed using a transmission electron microscopy (TEM).

Results

MTT assay showed that cytotoxicity induced by ultrasound treatment alone and curcumin treatment alone was 18.16 ± 2.37% and 24.93 ± 8.30%, respectively. The cytotoxicity induced by the combined treatment of ultrasound and curcumin significantly increased up to 86.67 ± 7.78%. TEM showed that microvillin disappearance, membrane blebbing, chromatin condensation, swollen mitochondria, and mitochondrial myelin-like body were observed in the cells treated by ultrasound and curcumin together. The significant collapse of mitochondrial membrane potential (MMP) was markedly observed in the CNE2 cells after the combined treatment of curcumin and ultrasound.

Conclusions

Our findings demonstrated that ultrasound sonication in the presence of curcumin significantly killed the CNE2 cells and induced ultrastructural damage and the dysfunction of mitochondria, suggesting that ultrasound treatment remarkably induced cellular destruction of nasopharyngeal carcinoma cells in the presence of curcumin.     

Progress in developing a thermal method for measuring the output power of medical ultrasound transducers that exploits the pyroelectric effect

Progress in developing a new measurement method for ultrasound output power is described. It is a thermal-based technique with the acoustic power generated by a transducer being absorbed within a specially developed polyurethane rubber material, whose high absorption coefficient ensures energy deposition within a few mm of the ultrasonic wave entering the material. The rate of change of temperature at the absorber surface is monitored using the pyroelectric voltage generated from electrodes disposed either side of a 60 mm diameter, 0.061 mm thick membrane of the piezoelectric polymer polyvinylidene fluoride (pvdf) bonded to the absorber. The change in the pyroelectric output voltage generated by the sensor when the transducer is switched ON and OFF is proportional to the delivered ultrasound power. The sensitivity of the device is defined as the magnitude of these switch voltages to a unit input stimulus of power (watt). Three important aspects of the performance of the pyroelectric sensor have been studied. Firstly, measurements have revealed that the temperature dependent sensitivity increases over the range from approximately 20 °C to 30 °C at a rate of +1.6% °C⁻¹. Studies point to the key role that the properties of both the absorbing backing layer and pvdf membrane play in controlling the sensor response. Secondly, the high sensitivity of the technique has been demonstrated using an NPL Pulsed Checksource, a 3.5 MHz focused transducer delivering a nominal acoustic power level of 4 mW. Finally, proof-of-concept of a new type of acoustic sensor responding to time-averaged intensity has been demonstrated, through fabrication of an absorber-backed hydrophone of nominal active element diameter 0.4 mm. A preliminary study using such a device to resolve the spatial distribution of acoustic intensity within plane-piston and focused 3.5 MHz acoustic fields has been completed. Derived beam profiles are compared to conventional techniques that depend on deriving intensity from acoustic pressure measurements made using the sensor as a calibrated hydrophone.     

Promoting inertial cavitation by nonlinear frequency mixing in a bifrequency focused ultrasound beam

Enhancing cavitation activity with minimal acoustic intensities could be interesting in a variety of therapeutic applications where mechanical effects of cavitation are needed with minimal heating of surrounding tissues. The present work focuses on the relative efficiency of a signal combining two neighbouring frequencies and a one-frequency signal for initiating ultrasound inertial cavitation. Experiments were carried out in a water tank, using a 550 kHz piezoelectric composite spherical transducer focused on targets with 46 μm roughness. The acoustic signal scattered, either by the target or by the cavitation bubbles, is filtered using a spectral and cepstral-like method to obtain an inertial cavitation activity measurement. The ultrasound excitations consist of 1.8 ms single bursts of single frequency f₀ = 550 kHz excitation, in the monofrequency case, and of dual frequency f₁ = 535 kHz and f₂ = 565 kHz excitation, in the bifrequency case. It is shown that depending on the value of the monofrequency cavitation threshold intensity the bifrequency excitation can increase or reduce the cavitation threshold. The analysis of the thresholds indicates that the mechanisms involved are nonlinear. The progress of the cavitation activity beyond the cavitation threshold is also studied. The slope of the cavitation activity considered as a function of the acoustic intensity is always steeper in the case of the bifrequency excitation. This means that the delimitation of the region where cavitation occurs should be cleaner than with a classical monofrequency excitation.     

Crystallization of hydrogenated amorphous silicon carbon films with laser and thermal annealing

The crystallization of silicon rich hydrogenated amorphous silicon carbon films prepared by Plasma Enhanced Chemical Vapor Deposition technique has been induced by excimer laser annealing as well as thermal annealing. The excimer laser energy density (E_d) and the annealing temperature were varied from 123 to 242 mJ/cm² and from 250 to 1200 °C respectively. The effects of the two crystallization processes on the structural properties and bonding configurations of the films have been studied. The main results are that for the laser annealed samples, cubic SiC crystallites are formed for E_d ≥ 188 mJ/cm², while for the thermal annealed samples, micro-crystallites SiC and polycrystalline hexagonal SiC are observed for the annealing temperature of 800 and 1200 °C respectively. The crystallinity degree has been found to improve with the increase in the laser energy density as well as with the increase in the annealing temperature.