Photocrosslinking of polymethoxymethylstyrene and copolymers containing (2,2-disubstituted-1,3-dioxolan-4-yl)methoxymethylstyrene

Methoxymethylstyrene (MSt), (2,2-dimethyl-1,3-dioxolan-4-yl)methoxymethylstyrene (MMSt), and (2-ethyl-2-methyl-1,3-dioxolan-4-yl)methoxymethylstyrene (EMSt) were synthesized and homopolymerized and copolymerized. The photochemical behavior of resultant homopolymers and copolymers with methyl methacrylate (MMA) and styrene (St) were investigated. The infrared (IR) and ultraviolet (UV) spectra of poly(MSt) showed that new bands ascribed to methyl benzoate residue increase rapidly with irrdiation time in air, but no detectable changes are observed in vacuum. The solubility measurements of poly(MSt) indicate that the main factor in crosslinking is the direct coupling of the benzyl radical generated by UV irradiation, which was confirmed by photopolymerization of MMA by means of benzyl methyl ether. It was also found that copolymers of MMSt or EMSt with MMA or St are easily crosslinked by UV irradiation. From the results of solubility measurements of these copolymers irradiated both in air and in vaccum, it was concluded that not only the 1,3-dioxolane structure but also the benzyl methyl ether structure takes part in photocrosslinking, as we expected.     

Alkoxy derivatives of trithiazyltrichloride

Reaction of trithiazyltrichloride, (NSCl)₃, with NaOR in ROH (R = Me, Et, ⁱPr, ⁿPr, ^nBu, ^tBu, pentyl, amyl, cyclohexyl, benzyl) gives (NSOR)₃. The compounds have been characterized by IR and mass spectroscopy and in the case of R = methyl, (2a) and benzyl, (2e) by X-ray crystallography. In the structures of both (2a) and (2e) the S₃N₃ ring adopts a flattened chair cyclohexane con7mation with the substituents being axial.     

Synthesis of new uracil non‐nucleoside derivatives as potential inhibitors of HIV‐1

6‐(2‐Phenylethyl) and 6‐cyclohexyl 5‐cyanouracils ( 1a,b ) were synthesized and reacted with chloromethyl ethyl ether, benzyl chloromethyl ether, chloromethyl methyl sulfide and (2‐acetoxyethoxy)methyl bromide. New uracil analogues of (S)‐DHPA were synthesized by reaction of compounds ( 1a,b ) with ((S)‐2,2‐dimethyl‐1,3‐dioxolane‐4‐yl) alkyl p‐toluenesulfonate.     

Strukturbestimmung von O-Methylazafrinmethylester durch 13C-NMR.-Spektroskopie

Structure Determination of Azafrin Methyl Ester 5-O-Monomethyl Ether by ¹³C-NMR.-Specta. The structure of the monomethyl ether ( 2 ) of azafrin methyl ester ( 1 ) was determined by a partial analysis of the ¹³C-NMR.-spectra. Assignments of quaternary carbon atoms and methyl groups in the cyclohexane ring were achieved using vicinal ¹³C-, ¹H-spin coupling. Substituent effects on methyl and methylene carbon atoms in 2 are discussed with respect to the conformation of the methoxy group. The spectra prove C(5)? OH as the site of methylation. Therefore C(5)? OH is less hindered than C(6)? OH.     

Synthesis and characterisation of PC(sp3)P phosphine and phosphinite platinum(II) complexes. Cyclometallation and simple coordination

New and improved preparative routes to the previously known PCP ligands cis-1,3-bis(di-isopropylphosphinito)cyclohexane and cis-1,3-bis[(di-tert-butylphosphino)methyl]cyclohexane are reported. They react with 1 equivalent of dichloro(1,5-cyclooctadiene)platinum(II) [(COD)PtCl2] to give the cis coordinated complex cis-[PtCl2{cis-1,3-bis(di-isopropylphosphinito)}cyclohexane] and the C(sp3)-H activated complex trans-[PtCl{cis-1,3-bis(di-tert-butylphosphino)}cyclohexane]. The new PCP ligand cis-1,3-bis(di-tert-butylphosphinito)cyclohexane was synthesised and reacts with [(COD)PtCl2] giving the di-nuclear trans-[PtCl2{cis-1,3-bis(di-tert-butylphosphinito)cyclohexane}]2, which is highly insoluble. All metal complexes were characterised with X-ray crystallography. DFT calculations indicate that the inability of the phosphinite ligands to cyclometallate is due to a kinetic barrier, possibly involving an axial-equatorial conformational change necessary for the C-H activation process.     

Ionic polymerization of p-vinylbenzyl methyl ether

Ionic polymerizations of vinylbenzyl methyl ether initiated by either carbanions or Lewis acids has been found to lead to crosslinked polymers. By comparative studies of strong carbanionic bases and Lewis acids with benzyl ethers, it has been possible to define details of mechanisms which in conjunction with cationic or anionic propagation lead to crosslinks. The α-hydrogens of benzyl ethers have been found to be sufficiently acidic to terminate anionic polymerization of styrene and displacement of alkoxide anion from the benzyl ether linkage by nucelophilic polymer anions is proposed as a mechanism leading to branching and eventual crosslinking in anionic polymerization of vinylbenzyl methyl ether. Cationic polymerization of vinylbenzyl methyl ether is quite complex. In addition to propagation, chain transfer, and spontaneous termination of cation chain carriers, there is evidence for complex formation between Lewis acid initiator and the benzyl ether substituent. A slow decomposition of ether–Lewis acid complexes produces benzylcarbonium ions which alkylate aromatic rings of polymer and thereby crosslink the polymer. Benzyl ether has been found to be an effective chain terminator for cationic styrene polymerization.     

Synthesis and Structure Characterization of Novel Triazole Compounds Containing 1,3-Dioxolane

Five novel triazole compounds containing group 1,3-dioxolane were designed and synthesized by taking difenoconazole as the start compound and changing diphenyl ether for benzyl phenyl ether. Their structure swere confirmed by elemental analyses, ^1H NMR and IR spectra. The single crystal structure of 2-[-4-(2,4-dichlorophenylmethoxy] phenyl-2-(1,2,4-triazol-l-yl ) methane-I, 3-dioxolane was determined by means of X-ray diffraction. The preliminary bioassays showed that the synthesized compounds exhibited some activities of fungicides and plant growth regulators.     

卡宾与醚C——H键插入反应的理论研究(Ⅳ)——CX2(X=H,F,Cl)与甲基苄基醚C-H键的插入反应

The C--Hbond insertion reactions between benzyl methyl ether and CX₂(X=H, F, Cl) have been studied by using density functional theory at B₃LYP/631G^*level.The potential barriers for the C--Hbond insertions in methyl group of benzyl methyl ether are123.3 kJ/mol(X=Cl) and240.4 kJ/mol(X=F), and those in benzyl group are37.5 kJ/mol(X=Cl) and112.2 kJ/mol(X=F) respectively.No potential barriers are present in both the insertion reactions with methylene groupThe C--Hbond insertion reactions between benzyl methyl ether and CX₂(X=H,F,Cl) take place primarily at α carbon of the benzyl group and the phenyl group promotes the C-Hbond insertion by carbene at its neighboring α-carbon more easily     

Isomerization reaction of olefin using RuClH(CO)(PPh(3))(3)

When methyl 5-(tert-butyldiphenylsilyl)oxy-2-pentenoate was refluxed in toluene in the presence of RuClH(CO)(PPh(3))(3) (5 mol %), double-bond migration took place to afford methyl 5-(tert-butyldiphenylsilyl)oxy-4-pentenoate in high yield. This means that the double bond conjugated with the ester moiety migrates to a deconjugated position by a ruthenium catalyst. We planned to prepare an enol ether from alpha,beta-unsaturated compounds having an ether moiety in a tether using ruthenium-catalyzed isomerization of the double bond. As a result, silyl or benzyl enol ether was obtained from the alpha,beta-unsaturated ester having alcohol protected by the silyl or benzyl group in a tether in high yield. In this reaction, double bond migration of alpha,beta-unsaturated ketone and alpha,beta-unsaturated amide took place to produce deconjugated compounds. Moreover, the double bond of alpha, beta-unsaturated ester having a triple or double bond in a molecule migrated to produce conjugated enyne and diene. On the other hand, treatment of a bis-metalated compound having an alpha, beta-unsaturated ester moiety or the double bond in a tether with RuClH(CO)(PPh(3))(3) gave allyl bis-metalated compound in good yield. These compounds are useful units in synthetic organic chemistry.     

溴化苄的合成工艺研究

以二苄醚和氢溴酸为原料,SO42-/TiO2为催化剂,环已烷为带水剂,合成了溴化苄。实验分别考察了反应物摩尔比、反应时间、反应温度、带水剂的用量,催化剂的使用量等因素对溴化苄收率的影响,得出了用此方法合成溴化苄的最佳反应条件:氢溴酸与二苄醚的摩尔比为3:1,反应时间为8 h,环已烷为8 mL,SO42-/TiO2催化剂的用量为0.5 g,溴化苄的收率达80.2%。     

SYNTHESIS OF SILICON MONOMERS AND OLIGOMERS CONTAINING CYCLOHEXYLENE RING

1,3-Bis(trichlorosilyl) cyclohexane was obtained by addition of HSiCl_3, to cyclohexadiene-1,3in the presence of H_2PtCl_6.6H_2O in isopropyl alcohol. The new compound was ethanolysed andmethylated to form di-methyl tetra-ethoxy disilyl, tri-methyl tri-ethoxy disilyl and terta-methyldi-ethoxy disilyl cyclohexanes. These di-to tetra-functional monomers were hydrolyzed by hydrochloric acid in ether. The di-functional monomer yielded cyclic dimer similar to octamethylcyclotetrasiloxane and the tri-functionalmonomer, a cyclic tetramer, while in the case of tetra-functional monomer a cyclic octamer wasobtained. These compounds have not been reported in literature.     

Cationic polymerization with p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts: Effect of substituents and mechanistic aspects of initiation reaction

Various p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts ( 2 ) were synthesized and their initiator activities were evaluated in bulk polymerization of glycidyl phenyl ether (PGE). The order of the activity was found to be 2b (X = CH₃) > 2a (X = H) ≈ 2c (X = Cl) > 2d (X = NO₂), indicating that the introduction of an electron-donating group enhanced the activity. In Hammett's plots, the logarithm of the ratio of the polymerization rates (log k_x/k_H) was correlated with σ⁺_ρ better than with σ_p and a negative ρ⁺ value (-1.18) was obtained. Reaction of 2a with benzyl mercaptan mainly gave dibenzyl sulfide and p-hydroxyphenyl methyl sulfide. The obtained results seemed to demonstrate that the OH group of the aryl group yielded no proton as initiator for the polymerization, whereas the benzyl group caused the polymerization, which was initiated by the corresponding benzyl cation formed by C? S bond cleavage. © 1993 John Wiley & Sons, Inc.     

The gas-phase reaction of hydrazine and ozone: A nonphotolytic source of OH radicals for measurement of relative OH radical rate constants

The homogeneous gas-phase reaction of N₂H₄ with O₃ in air atmospheric pressure has been used to generate OH radicals in the dark, allowing the determination of relative OH radical rate constants for compounds which photolyze rapidly. This technique was first validated by determining the OH radical rate constant ratios for n-butane/cyclohexane and methanol/dimethyl ether, both of which are in excellent agreement with the literature values. The rate constant for the reaction of OH radicals with methyl nitrite at 300 ± 3 K was then determined relative to those for the reaction of OH radicals with n-hexane and dimethyl ether. The resulting rate constant of 1.8 × 10^?13 cm³/molecule·s is about seven times lower than those of previous measurements which employed a different nonphotolytic relative rate method.     

Fundamental studies of a new series of anion exchange membranes: membrane preparation and characterization

Chemical cross-linking anion exchange series membranes were prepared from linear engineering plastics poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) by conducting the processes of bromination and amination at both benzyl and aryl positions. Compared with the traditional technologies, the membrane route described in this paper has cancelled the chloromethylation process and thus, given up the use of chloromethyl methyl ether, which has been considered as a potential harmful toxicity material. The ion exchange capacity, water content, membrane potential and transport number of membranes were studied. The results show that the membrane properties are significantly affected by the bromination processes: benzyl-substitution will enhance the ion exchange capacity and water content, while the aryl-substitution will decrease the water content with approximately unchanged ion exchange capacity. By properly balancing them, a series of membranes can be obtained to comply with different industrial requirements, such as diffusional dialysis, electrodialysis, and water splitting processes.     

Preparation and cholesteric mesophase properties of (Butyl-co-pentyl) propylcellulose

Butyl and pentyl ether derivatives of (2-hydroxypropyl) cellulose (HPC) and butyl/pentyl mixed ethers of HPC (BPPC) with different alkyl compositions were prepared in nonaqueous solution and their thermotropic cholesteric properties examined. The temperature dependence and the composition dependence of the optical pitch, nP, were then determined for all of the ether derivatives. The molecular conformation and chirality of BPPC appeared to be to be variably smooth with the side chain composition of the polymer. The response rate of cholesteric configurational change of the thermotropic mesophases arising from a temperature jump from 45  to 75 °C, was also determined. The transformation of the cholesteric mesophase formed by an equimolar ether derivative (BP-50) was faster than that of the cholesteric one formed by a single-alkyl (pentyl) ether derivative (BP-0). This seemed to be a general result reflecting a pseudo-copolymer effect of cellulose derivatives on the properties of their thermotropic cholesteric mesophases.     

Ion structural studies by ion kinetic energy spectrometry: [C7H7]+, [C7H8]+˙, [C7H7OCH3]+˙

The use of kinetic energy release measurements in the structural characterization of ions formed in the mass spectrometer and in the determination of fragmentation mechanisms is demonstrated. In combination with information on the mode of energy partitioning in some of these reactions this allows the following conclusions: (i) The metastable [C₇H₈]⁸˙ ions formed from toluene, cyclohepatatriene, n-butylbenzene, the three methyl anisoles, methyl tropyl ether and benzyl methyl ether all undergo loss of H˙ from a common structure. (ii) The metastable [C₇H₇]⁺ ions generated from the same sources and from benzyl bromide, benzyl alcohol, p-xylene and ethylbenzene appear to undergo loss of acetylene from both the benzylic and the tropylium structures. (iii) The metastable [C₇H₇OCH₃]⁺˙ ether molecular ions undergo loss of CH₃˙ by two types of mechanism, simple cleavage to give the aryloxy cation (not observed for benzyl methyl ether) and a rearrangement process which appears to lead to protonated tropone as the product. (iv) Loss of formaldehyde from the metastable [C₇H₇OCH₃]⁺˙ molecular ions involves hydrogen transfer via competitive 4- and 5-membered cyclic transition states in the case of the anisoles and in the case of methyl tropyl ether, while for benzyl methyl ether, hydrogen transfer in the nonisomerized molecular ion occurs via a 4-membered cyclic transition state to yield the cycloheptatriene molecular ion.     

Rotational isomerism—22: An nmr study of oh..π bonding and the conformations of benzyl alcohol and derivatives

The conformations of benzyl alcohol, the ortho and para nitro and methoxy derivatives and benzyl methyl ether have been investigated by NMR in CCL₄ and DMSO solutions. The ³J(CH.OH) and ²J(H.C.H) couplings (the latter via the ²J(H.C.D)coupling)and the OH chemical shift (in DMSO and ∞ dil^XXX as conformational probes. The δ_∞ (OH) for ROH (R = Me, Et, iPr) is also given.The results provide no support for the existence of an intramolecular H-bond in benzyl akohol The endo conformation of the OH proton (anti to a CH proton) is favoured by ca. 1 kcal mole^?1 over the exo conformation (H anti to phenyl) and these conformers are responsible for the separate OH frequencies observed in the IR spectrum. The results do not support an extreme conformation of the phenyl ring (C.C.C.O dihedrals of 0 or 90°) but are consistent with either an 6?0° conformation of the phenyl ring or a freely rotating model. In ortho nitrobenzyl alcohol intramolecular H-bonding is present, but in ortho methoxy benzyl alcohol little or no bonding to the substituent occurs.     

Room temperature rate constants for the reaction of OH with selected chlorinated and oxygenated hydrocarbons

A study was conducted to measure the hydroxyl radical rate constants using a relative rate procedure in which the photolysis of methyl nitrite was the source of OH. During the course of this study, the OH rate constant was measured for a number of chlorinated solvents for which measurements have not previously been reported or for which there are few reliable measurements. Room temperature OH rate constants are presented for six chlorinated hydrocarbons (allyl chloride, benzyl chloride, chlorobenzene, epichlorohydrin, trichloroethylene, and vinylidene chloride) and four oxygenated hydrocarbons (acrolein, methacrolein, methyl ethyl ketone, and propylene oxide). Also included are OH rate constants for alkanes (ethane, propane, isobutane, and cyclohexane), alkenes (trans?2-butene and isoprene), and aromatic hydrocarbons (benzene, toluene, o^?, m^?, and p-xylene). Rate constants for compounds not previously reported include vinylidene chloride (1.49 ± 0.21 × 10^?11 cm³ molecule^?1 s^?1) and benzyl chloride (2.96 ± 0.15 × 10^?12 cm³ molecule^?1 s^?1). The analysis for chlorinated hydrocarbons included a correction for possible chlorine atom reactions.