Potassium Sensing Calix[4]arene Crown Ethers

1,3-Alternate calix[4]arene crown-5 (1) and corresponding biscrown-5 (2) were synthesized and the complexation behavior with alkali metal ions examined. For both 1 and 2, potassium ion was selectively extracted from aqueous phase into organic phase over other alkali metal ions based on two phase extraction experiment. The complexation ratio between calix[4]arene biscrown-5 (2), in which two crown cavities connect to the calix[4]arene framework by 1,3-alternate fashion and potassium metal ion is found to 1:1 by proton NMR spectroscopy and extraction equilibria. Association constants (logK_a) for 1 and 2 were determined to give 2.51 and 3.49, respectively.     

Information transfer in calix[4]arenes: influence of upper rim substitution on alkaline metal complexation at the lower rim

Novel calix[4]arene amides have been synthesized and their interaction with alkaline cations has been evaluated through extracting aqueous solutions of Li-, Na- and K-picrates with solutions of calix[4]arene amides in CH₂Cl₂. Electron-withdrawing groups on the upper rim of the calix[4]arene scaffold were found to have a negative effect on the absolute amount of metal ions extracted. The decreased extraction ability is accompanied by a higher selectivity towards sodium cations.     

Synthesis and Structure of Novel Double Flexible Spacer Bridged Biscalix[4]arenes

25, 25′, 27, 27′‐Bis(1,3‐dioxypropane)‐bis(5, 11, 17, 23‐tetra‐tert‐butylcalix[4]arene‐26,28‐diol) (4) and 25, 25′, 27, 27′‐bis(1, 4‐dioxybutane)‐bis (5, 11, 17, 23‐tetra‐tert‐butylcalix‐[4]arene‐26, 28‐diol) (5) were synthesized by the reaction of p‐tert‐butylcalix[4]arene (1) with preorganized 25, 27‐bis(3‐bromoproxyl)calix[4]arene‐26, 27‐diol (2) and 25, 27‐bis(3‐bromobutoxyl)calix[4]arene‐26, 27‐diol (3) in the presence of K₂CO₃ and KI. Compounds 4 and 5 were characterized with X‐ray analysis and the selectivity of 4 and 5 toward K⁺ over other alkali metal ions, alkaline metal ions as well as NH₄⁺ were investigated with an ion‐selective electrode.     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Mercury(II) and silver(I) receptors based on tetrathiacalix[4]arene hydrazones

The extraction ability of phenyl hydrazone derivatives of cone- and 1,3-alternate tetrathiacalix[4]arenes towards to some alkali, alkaline earth, transition and heavy metal ions has been investigated by picrate extraction method. The synthesized cone-tetrathiacalix[4]arene hydrazones show a high efficiency coupled with an excellent selectivity towards for Ag⁺ and Hg²⁺ ions. The stoichiometry of complexes and the extraction constants have been determined. The influence of calix[4]arene platform’s structure and the electron donor substituents in phenyl fragments on the extraction efficiency has been discussed.     

Synthesis,crystal structures and competitive complexation property of a family of calix-crown hybrid molecules and their application in extraction of potassium from bittern

A family of calix-crown hybrid molecules containing calix[4]arene and crown-5/6, either at lower rim or at both upper and lower rims, have been synthesised, characterised and their competitive complexation property towards alkali and alkaline earth metal ions in aqueous media have been investigated. The competitive metal ion extraction study, carried out with equimolar mixture of Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺ and Sr²⁺ in aqueous media, revealed that the amount of K⁺ extracted is remarkably high compared to other metal ions. Complexation with K⁺ has been investigated by ¹H NMR, association constants and thermodynamic parameters have been determined by isothermal calorimetric study. The molecular structures of one of the receptors and two of the K⁺ complexes have been established by single crystal X-ray study. One of the receptors formed bimetallic complex and it exhibited interesting polymeric network structure with bridged picrate anion. These receptors have been applied for extraction of metal ions from bittern.     

Highly selective complexation of metal ions by the self-tuning tetraazacalixpyridine macrocycles

By means of UV-vis and ¹H NMR titrations and X-ray crystallography, complexation of tetramethylazacalix[4]pyridine L1 and tetramethylazacalix[2]arene[2]pyridine L2 with metal ions was studied. While no interaction was observed with alkali and alkaline earth metal ions, both ligands have been found to act as powerful and selective macrocyclic hosts to complex a number of transition and heavy metal ions. Due to the intrinsic nature of the bridging nitrogen atoms that can adopt different electronic configurations and form varied degrees of conjugations with their adjacent pyridine rings, tetramethylazacalix[4]pyridine L1 regulated its conformation and cavity structure to best fit the guest metal ion species, yielding a 1:1 square planar L1-Mⁿ⁺ complex with binding constants log K_1:1 ranging from 2.7(1) to 8.2(8).     

Tetra(diethyl)amide-p-tert-butyl-thiacalix[4]arene in Cone Conformation: Synthesis and Binding Properties with Alkali,Alkaline Earth,Heavy and Transition Metal Ions

Tetra(diethyl)amide-p-tert-butylthiacalix[4]arene 1a in the cone conformation was synthesized and its binding properties towards a large variety of metal ions were established on the basis of liquid–liquid and solid–liquid extraction as well as complexation experiments. This compound is a less efficient and selective compound than the “classical” tetra(diethyl)amide-p-tert-butylcalix[4]arene 3 in the cone conformation for alkali and alkaline earth metal ions. However, Pb²⁺ is selectively extracted and complexed within heavy and transition metal ions.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Pyridinyl hydrazone derivatives of thiacalix[4]arene as selective extractants of transition metal ions

The recognition ability of pyridinyl hydrazone derivatives of cone- and 1,3-alternate tetrathiacalix[4]arenes towards transition and alkali metals has been investigated by picrate extraction method. The stoichiometry of complexes and the extraction constants have been determined. It has been found that hydrazones do not extract alkali metal ions but show an excellent affinity towards transition and heavy metal cations. The removal of tert-butyl groups from calix[4]arene platform in the case of cone and 1,3-alternate isomers leads to an increase of d-ion extraction selectivity or efficiency.     

Highly selective fluorescent sensing of Pb by a new calix[4]arene derivative

A new chemosensor was synthesized by the alkylation of p-tert-butyl-calix[4]arene with three N,N-diethylacetamide groups and one methyl 3-ethoxy-naphthalene-2-carboxylate, which exhibited highly selective fluorescent response to Pb²⁺ over alkali, alkali earth metal ions and some transition metal ions in CH₃CN-H₂O.     

Salt-Bridge Supported Bilayer Lipid Membrane Modified with Calix[n]arenes as Alkali Cation Sensors

ABSTRACT

Potentiometric behaviors of a salt-bridge supported bilayer lipid membrane (Sb-BLM) modified with Calix[n]arene (n=4, 6, 8) derivatives are described for some alkali metal ions. The modified Sb-BLM was used as an alkali cation sensor. The membrane potentials were observed to generate Nernstian responses to the concentration of alkali metal ions in electrolyte. The Sb-BLM modified with the calix[n]arenes show high selectivity for individual alkali metal ions: Calix[8]arenes for K⁺, calix[6]arenes for Cs⁺ Calix[4]arenes show no selectivity for any alkali ions. The interacting mechanism is also discussed.     

Synthesis and extraction properties of preorganized host molecules based on tetraamides of thiacalix[4]arene

Template effect of alkali metal ions was employed to prepare three isomers of tetraamide of p-tert-butylthiacalix[4]arene: cone, partial cone and 1,3-alternate. It was demonstrated that pre-organization of four amide fragments attached to the calix[4]arene platform has a strong macrocyclic cooperative effect on the extraction ability of the title hosts.     

Highly selective fluorescent chemosensor for Na<Superscript>+</Superscript> based on pyrene-modified calix[4]arene derivative

A novel calix[4]arene derivative with pyrene fluorophores at the upper rim and tetraester ionophores at the lower rim was synthesized in six steps, and its structure was proved by NMR and ESI-MS spectroscopies. Furthermore, the chemosensing behavior of the host compound for alkali and alkaline earth metal ions was investigated by fluorescence spectroscopy. The obtained results show that the calixarene host can selectively bind sodium ion with the complexation stability constant of 2190 mol⁻¹·L. The complexation with sodium ion can pronouncedly induce the excimer emission to decrease and the monomer emission to increase, whereas the addition of the other alkali and alkaline earth metal ions does not cause appreciable changes in the fluorescence spectrum of the host compound. The present calix[4]arene derivative displays potential application as fluorescent chemosensor for sodium ion. Supported by the National Natural Science Foundation of China (Grant Nos. 20421202, 20673061 & 20703025) and the 111 Project (Grant No. B06005)     

Improvement of selective d-cation binding by tetrathiacalix[4]arene hydrazides: synthesis and extraction properties

New de-tert-butyltetrathiacalix[4]arenes with acetylhydrazide substituents in cone and 1,3-alternate conformations have been synthesised with good yield by the hydrazinolysis of calix[4]arene ester derivatives. The recognition ability of synthesised macrocycles towards transition and alkali metals has been investigated by the picrate extraction method. The stoichiometry of complexes and the extraction constants have been determined. It has been found that tetrahydrazides do not extract alkali metal ions, but show an excellent affinity towards transition and heavy metal cations. The 1,3-alternate conformer of de-tert-butyltetrathiacalix[4]arene has revealed a remarkable selectivity for Ni²⁺ and Ag⁺ in the row of d-elements and for Cd²⁺ ion among the toxic heavy metals. The experimental data show that the removal of tert-butyl groups from tetrathiacalix[4]arene framework leads to the drastic improvement of extraction efficiency and selectivity of new tetrahydrazides.     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

Regulation of metal ion recognition by allosteric effects in thiacalix[4]crown based receptors

Three new ditopic receptors 3a-c based on thiacalix[4]arene of 1,3 alternate conformation possessing two different complexation sites have been designed and synthesized for both soft and hard metal ions. The imino nitrogens bind soft metal ion (Ag⁺/Pb²⁺/Cu²⁺) and the crown moiety binds K⁺ ion. The preliminary investigations show that 3a-c behave as ditopic receptors for Ag⁺/K⁺, Pb²⁺/K⁺, and Cu²⁺/K⁺ ions, respectively. In all the three receptors it was observed that the formation of 3a·Ag⁺/3b·Pb²⁺/3c·Cu²⁺ complex triggers the decomplexation of K⁺ ion from crown moiety and acts as a gateway, which regulates the binding of alkali metal to crown moiety. Thus, allosteric binding between metal ions ‘switch off’ the recognition ability of crown ether ring.     

The effect of phenoxy oxygen atoms on extremely high extraction ability and less separation efficiency of trivalent rare earth elements with tetraphosphonic acid derivative of calix[4]arene

A cone confomational p-t-octylcalix[4]arene with four methylenephosphonic acids at the lower rim as well as its monomeric analog have been synthesized as a new extraction reagent to investigate the extraction behavior of the nine trivalent rare earth elements: Y, La, Pr, Nd, Sm, Eu, Gd, Ho and Er. The new calix[4]arene exhibited significantly higher extraction capacity than not only the monomeric derivative and the commercial extraction reagent, 2-ethylhexyl hydrogen 2-ethylhexylphosphonate, but also the cone conformational calix[4]arene extractants employed in our previous work, composed of a tetrapropylenephosphonic acid with a longer spacer, a tetraphosphonic acid at the upper rim, and tetraacetic acid at the lower rim. A dependence on the pH was observed for the new extractant in the highly acidic region, and the extraction took place via a simple ion-exchange mechanism. Using slope analysis, the stoichiometries of tetrameric and monomeric extractants to rare earth metal ions were determined to be 2:1 and 3:1, respectively. Using the proposed extraction equations, extraction equilibrium constants and separation factors were estimated. The extremely high extraction ability and moderate separation efficiency were attributed to the chelating effect of the phosphonic acid and the phenoxy oxygen atom. The effect of the phenoxy oxygen atom on extraction ability and separation efficiency of calix[4]arene derivatives was found to be significant.     

Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).