FT-Raman and infrared spectra and vibrational assignments for 3-chloro-4-methoxybenzaldehyde, as supported by ab initio, hybrid density functional theory and normal coordinate calculations

Fourier-transform laser Raman (3500-50 cm(-1)) and infrared (4000-400 cm(-1)) spectral measurements have been made for the solid 3-chloro-4-methoxybenzaldehyde. The electronic structure calculations -ab initio (RHF) and hybrid density functional methods (B3LYP and B3PW91) -- have been performed with 6-31G* and 6-311G* basis sets. Molecular electronic energies, equilibrium geometries, IR and Raman spectra have been computed. Potential energy distribution (PEDs) and normal mode analysis have also been performed. A complete assignment of the observed spectra has been proposed. Investigation of the relative orientation of the aldehydic oxygen and chlorine atom with respect to the methoxy group has shown that two forms, O-cis and O-trans exist, with O-trans form being more stable. The energy difference between O-cis and O-trans forms is 0.057 kcal/mol (21 cm(-1)) with B3LYP/6-31G*, which is less than the calculated torsional vibrational frequencies of the aldehyde and methoxy group. In the CH (O) aldehydic stretching region five observed bands are probably due to multiplet Fermi resonance. An infrared doublet near 1700 cm(-1) with nearly equal intensities has been ascribed to the Fermi resonance: the two bands at 1696 and 1679 cm(-1) arise due to the interaction between the CO stretching fundamental and a combination of O-CH(3) and CC stretching vibrations.     

Hydrogen bond, dimerization and vibrational modes in 2-chloro-3-hydroxybenzaldehyde and 3-chloro-4-hydroxybenzaldehyde from vibrational and ab initio studies

Ab initio conformers and dimers have been computed at RHF and B3LYP/6-31G* levels for isomers 2-chloro-3-hydroxybenzaldehyde and 3-chloro-4-hydroxybenzaldehyde to explain the observed infrared absorption and Raman vibrational spectral features in the region 3500-50 cm(-1). The position of the chlorine in ortho position with respect to aldehyde group in 2-chloro-3-hydroxybenzaldehyde yields four distinct conformers; whereas the chlorine in meta position in 3-chloro-4-hydroxybenzaldehyde yields effectively only three conformers. Major spectral features as strong absorptions near 3160-80 cm(-1), down-shifting of the aldehydic carbonyl stretching mode and up-shifting of hydroxyl group's in-plane bending mode are explained using ab initio evidence of O-H?O bond-aided dimerization between the most stable conformers of each molecule. Absorption width of about 700 cm(-1) (～8.28 kJ/mol) of O-H stretching modes suggests a strong hydrogen bonding with the ab initio bond lengths, O-H?O in the range of 2.873-2.832 ?. A strong Raman mode near 110-85 cm(-1) in each molecule is interpreted to be coupled vibrations of pseudo-dimeric trans and cis structures.     

Vibrational assignment of the normal modes of 2-phenyl-4-(4-methoxy benzylidene)-2-oxazolin-5-one via FTIR and Raman spectra, and ab inito calculations

Raman and FTIR spectra of 2-phenyl-4-(4-methoxy benzylidene)-2-oxazolin-5-one were recorded in the regions, 100-3300 and 400-4000 cm(-1), respectively. Vibrational frequencies and intensities of the fundamental modes of this hetrocyclic organic molecule were computed using ab initio as well as AM1 semiempirical molecular orbital methods. Ab initio calculations were carried out with basis set up to RHF/6-311G. Conformational studies regarding the effect of moving the methoxy group in the 2-phenyl-4-(4-methoxy benzylidene)-2-oxazolin-5-one molecule to a different position on the ring was also carried out. Observed vibrational wavenumbers were found to be mostly consistent with ab initio values. The most intense mode of vibration observed at 1250 cm(-1) in Raman spectra, also observed as a strong band in FTIR, was assigned as C-O stretching vibration in the methoxy group. Asymmetric stretching vibrations between CC and CN bonds was predicted as most intense mode by our ab initio calculation.     

Ab-initio molecular geometry and normal coordinate analysis of tetrahydrothiophene molecule.

The molecular geometry of tetrahydrothiophene (THT) was quantum mechanically calculated using the split valence 6-31G** basis set. Electron correlation energy has been computed employing MP2 method. The molecule showed a twist form puckered structure with a twist torsion angle of 13 degrees and has a total energy of -347,877.514 kcal/mol of which a 436.715 kcal/mol electron correlation energy. The envelope form of the molecule showed an inter-plane angle of 22 degrees and has a total energy of -347,874.430 kcal/mol involving -436.558 kcal/mol electron correlation energy. The normal coordinates of the molecule were theoretically analyzed and the fundamental vibrational frequencies were calculated. The IR and laser Raman spectra of THT molecule was measured. All the observed vibrational bands including combination bands and overtones were assigned to normal modes with the aid of the potential energy distribution values obtained from normal coordinate calculations. The molecular force field was determined by refining the initial set of force constants using the least square fit method instead of using the less accurate scaling factor methods. The determined molecular force field has produced simulated frequencies which best match the observed values. The lowest-energy modes of vibration were two molecular out-of-plane deformations, observed at 114 and 166 cm(-1). The barrier of ring twisting estimated from the observed ring out-of-plane vibrational mode at 114 cm(-1) was estimated.     

Spectra and structure of silicon-containing compounds. Part XXXVIII: Infrared and Raman spectra,vibrational assignment,conformational stability,and ab initio calculations of vinyldifluorosilane

Infrared spectra (3500-50 cm(-1)) of gaseous and solid, and Raman spectrum (3500-30 cm(-1)) of liquid vinyldifluorosilane, CH(2)z.dbnd6;CHSiF(2)H, are reported. Both the cis and gauche rotamers have been identified in the fluid phases. From temperature-dependent FT-infrared spectra of krypton solutions, it is shown that the cis conformer is more stable than the gauche form by 119+/-12 cm(-1) (1.42+/-0.14 kJ mol(-1)). At ambient temperature there is 53+/-2% of the gauche conformer present. Complete vibrational assignments are provided for the cis conformer and several modes are identified for the gauche form. Harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2/6-31G(d), MP2/6-311+G(d,p), and MP2/6-311+G(2d,2p) calculations with full electron correlation as well as from density functional theory calculations (DFT) by the B3LYP method. The SiH bond distances (r(0)) of 1.472 and 1.471 A have been obtained for the cis and gauche conformers, respectively, from the silicon-hydrogen stretching frequencies. These results are compared to the corresponding quantities of the corresponding carbon analogue as well as with some similar molecules.     

Intramolecular hydrogen bond, molecular structure and vibrational assignment of tetra-acetylethane. A density functional study

The intramolecular hydrogen bond, molecular structure and vibrational frequencies of tetra-acetylethane have been investigated by means of high-level density functional theory (DFT) methods with most popular basis sets. Fourier transform infrared and Fourier transform Raman spectra of this compound and its deuterated analogue were recorded in the regions 400-4000 cm(-1) and 40-4000 cm(-1), respectively. The calculated geometrical parameters of tetra-acetylethane were compared to the experimental results of this compound and its parent molecule (acetylacetone), obtained from X-ray diffraction. The O...O distance in tetra-acetylethane, about 2.424A, suggests that the hydrogen bond in this compound is stronger than acetylacetone. This conclusion is well supported by the NMR proton chemical shifts and O-H stretching mode at 2626 cm(-1). Furthermore, the calculated hydrogen bond energy in the title compound is 17.22 kcal/mol, which is greater than the acetylacetone value. On the other hand, the results of theoretical calculations show that the bulky substitution in alpha-position of acetylacetone results in an increase of the conjugation of pi electrons in the chelate ring. Finally, we applied the atoms in molecules (AIM) theory and natural bond orbital method (NBO) for detail analyzing the hydrogen bond in tetra-acetylethane and acetylacetone. These results are in agreement with the vibrational spectra interpretation and quantum chemical calculation results. Also, the conformations of methyl groups with respect to the plane of the molecule and with respect to each other were investigated.     

Infrared and Raman spectra of 3,5-diamino-6-(o-C6H4X)-1,2,4-triazines [X = F,Cl, Br,CH3

Raman and infrared spectra of four substituted 3,5-diamino-6-(ortho-substituted phenyl)-1,2,4-triazines, having ortho-fluoro, -chloro, -bromo and -methyl groups on the phenyl ring, are reported and discussed. Bands due to substituent sensitive phenyl vibrations are observed in both the Raman and infrared spectra. The Raman spectra of all four compounds have strong bands near 770 and 1330 cm(-1) which are assigned to the ring breathing vibration of the 1,2,4-triazine ring and an asymmetric triazine C-NH2 stretching vibration, respectively. A medium/strong band near 800 cm(-1) in the infrared spectra is attributed to an out-of-plane bending vibration of the substituted 1,2,4-triazine ring.     

Resonance Raman detection of the Fe2+-C-N modes in heme-copper oxidases: a probe of the active site

Resonance Raman spectroscopy has been employed to investigate the reduced cyano complexes of cytochrome aa(3) from bovine heart and Rhodobacter sphaeroides and of cytochrome bo(3) from E. coli. In the aa(3)-type oxidases, the frequency of the Fe-CN stretching mode is located at 468 cm(-1), and the bending Fe-C-N vibration, at 500 cm(-1). The fully reduced cytochrome bo(3)-CN complex gives rise to a stretching vibration at 468 cm(-1), a bending vibration at 491 cm(-1), and a stretching C-N vibration at 2037 cm(-1). The observed differences between aa(3) and bo(3) oxidases in the frequencies of the Fe-C-N group suggest a quantitative difference in the structure of the His-heme a(3)(2+)/Cu(B)(1+) and His-heme o(3)(2+)/Cu(B)(1+) binuclear pockets upon CN- binding.     

Raman spectroscopic study of a hydroxy-arsenate mineral containing bismuth-atelestite Bi2O(OH)(AsO4)

The Raman spectrum of atelestite Bi2O(OH)(AsO4), a hydroxy-arsenate mineral containing bismuth, has been studied in terms of spectra-structure relations. The studied spectrum is compared with the Raman spectrum of atelestite downloaded from the RRUFF database. The sharp intense band at 834 cm(-1) is assigned to the ν1 AsO4(3-) (A1) symmetric stretching mode and the three bands at 767, 782 and 802 cm(-1) to the ν3 AsO4(3-) antisymmetric stretching modes. The bands at 310, 324, 353, 370, 395, 450, 480 and 623 cm(-1) are assigned to the corresponding ν4 and ν2 bending modes and BiOBi (vibration of bridging oxygen) and BiO (vibration of non-bridging oxygen) stretching vibrations. Lattice modes are observed at 172, 199 and 218 cm(-1). A broad low intensity band at 3095 cm(-1) is attributed to the hydrogen bonded OH units in the atelestite structure. A weak band at 1082 cm(-1) is assigned to δ(BiOH) vibration.     

Raman spectroscopy of newberyite, hannayite and struvite

The phosphate minerals hannayite, newberyite and struvite have been studied by Raman spectroscopy using a thermal stage. Hannayite and newberyite are characterised by an intense band at around 980cm(-1) assigned to the v(1) symmetric stretching vibration of the HPO(4) units. In contrast the symmetric stretching mode is observed at 942cm(-1) for struvite. The Raman spectra are characterised by multiple v(3) anti-symmetric stretching bands and v(2) and v(4) bending modes indicating strong distortion of the HPO(4) and PO(4) units. Hannayite and newberyite are defined by bands at 3382 and 3350cm(-1) attributed to HOPO(3) vibrations and hannayite and struvite by bands at 2990, 2973 and 2874 assigned to NH(4)(+) bands. Raman spectroscopy has proven most useful for the analysis of these 'cave' minerals where complex paragenetic relationships exist between the minerals.     

Quantum chemical study on the configurations of encapsulated metal ions and the molecular vibration modes in endohedral dimetallofullerene La2@C80

The configuration of La ions of La(2)@C(80) in the [80]fullerene cage was investigated by use of quantum chemical calculations. We found that the D(3)(d)() configuration is the global minimum in total energy, being more stable by 1.9 kcal/mol than the D(2)(h)() configuration, which has been considered to be the most stable. The potential energy surface calculation clarified that La ions travel between 10 equivalent D(3)(d)() positions through D(2)(h)() positions and consequently form pentagonal dodecahedral trajectory, which is in good agreement with the previous synchrotron radiation structural study. The experimental and theoretical investigation of the Raman spectrum revealed that the symmetry of molecular vibration is dramatically reduced simply by encapsulation of two La ions, and resulting vibrational modes were successfully assigned. The Raman peak at 163 cm(-)(1) was interpreted as the in-phase synchronously coupled mode of the [80]fullerene cage elongation and the La-La stretching, rather than a conventional and naive assignment as a metal-to-cage vibration mode.     

Ab-initio molecular geometry and normal coordinate analysis of pyrrolidine molecule.

The molecular geometry of pyrrolidine was quantum mechanically calculated using the split valence 6-31G** basis set. Electron correlation energy has been computed employing MP2 method. The molecule showed an envelope form puckered structure with inter-plane angle of 36.4 degrees and has a total energy of -132976.80 kcal mol(-1) of which a -464.86 kcal mol(-1) electron correlation energy. The twist form of the molecule showed a twist angle of 10.2 degrees from planarity and has a total energy of -132976.05 kcal mol(-1) involving -464.097 kcal mol(-1) electron correlation energy. The normal coordinates of the molecule were theoretically analyzed on the basis of the Cs point symmetry of the envelope form. Using initial set of force constants obtained from the ab-initio calculations the fundamental vibrational frequencies were computed. The IR and laser Raman spectra of Pyrrolidine molecules were measured. All the observed vibrational bands including combination bands and overtones were assigned to normal modes with the aid of the potential energy distribution values obtained from normal coordinate calculations. The molecular force field was obtained by refining the initial set of force constants using the least square fit method. The molecular force field was determined by refining the initial set of force constants using the least square fit method instead of using the less accurate scaling factor methods. The determined molecular force field has produced simulated frequencies best match to the observed values. The low frequency molecular out-of-plane deformation modes were observed in both infrared and Raman spectra at 298 and 163 cm(-1). The barrier of ring twisting estimated from the observed ring out-of-plane vibrational mode at 163 cm(-1) was found 3.1 kcal mol(-1).     

Conformational stability, vibrational assignmenents, barriers to internal rotations and ab initio calculations of 2-aminophenol (d 0 and d3)

The Raman (3700-100 cm(-1)) and infrared (4000-400 cm(-1)) spectra of solid 2-aminophenol (2AP) have been recorded. The internal rotation of both OH and NH2 moieties produce ten conformers with either Cs or C1 symmetry. However, the calculated energies as well as the imaginary vibrational frequencies reduce rotational isomerism to five isomers. The molecular geometry has been optimized without any constraints using RHF, MP2 and B3LYP levels of theory at 6-31G(d), 6-311+G(d) and 6-31++G(d,p) basis sets. All calculations predict 1 (cis; OH is directed towards NH2) to be the most stable conformation except RHF/6-31++G(d,p) basis set. The 1 (cis) isomer is found to be more stable than 8 (trans; OH is away from the NH2 moiety and the NH bonds are out-of-plane) by 1.7 kcal/mol (598 cm(-1)) as obtained from MP2/6-31G(d) calculations. Aided by experimental and theoretical vibrational spectra, cis and trans 2AP are coexist in solution but cis isomer is more likely present in the crystalline state. Aided by MP2 and B3LYP frequency calculations, molecular force fields, simulated vibrational spectra utilizing 6-31G(d) basis set as well as normal coordinate analysis, complete vibrational assignments for HOC6H4NH2 and DOC6H4ND2 have been proposed. Furthermore, we carried out potential surface scan, to determine the barriers to internal rotations of NH2 and OH groups. All results are reported herein and compared with similar molecules when appropriate.     

The vibrational spectra, assignments and ab initio/DFT analysis for 3-chloro, 4-chloro and 5-chloro-2-methylphenyl isocyanates

The Raman (3500-50 cm(-1)) and infrared (4000-200 cm(-1)) spectra of 3-chloro, 4-chloro and 5-chloro-2-methylphenyl isocyanates have been measured. Ab initio and density functional theory calculations, at the levels of RHF/6-311G* and B3LYP/6-311G*, have been performed: energies, optimized geometrical parameters, vibrational frequencies, infrared intensities, Raman activities, depolarization ratios and nuclear displacements are obtained. Potential energy distributions (PEDs) and normal modes, for the spectral data computed at B3LYP/6-311G*, have also been obtained from a force-field calculations. A complete vibrational assignments of the observed spectra have been proposed. The force-field calculations have shown that, several of the normal modes are coupled, as is the case with large molecular systems possessing very low or no symmetry, such as investigated in the present study. Further, the investigation of the internal rotation of the isocyanate, NCO, by B3LYP/6-31G* level of theory has shown that the moiety maintains nearly the same orientation in all the three compounds (approximately 140-145 degrees tilt to the para-position) as in phenyl isocyanate. Two conformers, cis and trans forms, with respect to the substituents, NCO and CH(3), have been determined: the cis form lies above trans form by less than a kilocalorie per mole for each compound.     

The infrared and Raman spectra of trans- and cis-tetrachloro-tetramethylbicyclopropylidene

The title compounds trans- and cis-2,2,2',2'-tetrachloro-3,3,3',3'-tetramethyl-bicyclopopylidene were synthesized, and their infrared and Raman spectra were recorded. Non-coincidence between the IR and Raman bands of the trans compound suggested C(2h) symmetry and a planar ring system. In the cis compound most of the IR and Raman bands coincided and a C(2v) symmetry seems likely. The exocyclic CC double bond gave rise to a medium/weak Raman band at 1,847 cm(-1) in the trans compound. In the cis derivative IR and Raman bands both at 1,825 cm(-1) were observed. From similarities with related molecules, the ring breathing, the antisymmetric ring stretch, the CCl(2) out-of-phase and in-phase stretch and the out-of-plane ring bending modes have been tentatively assigned for the trans and cis compounds.     

DFT, FT-Raman and FT-IR investigations of 5-o-tolyl-2-pentene

FT-IR and Raman spectra of 5-o-tolyl-2-pentene (OTP) have been experimentally reported in the region of 4000-10 cm(-1) and 4000-100 cm(-1), respectively. The optimized geometric parameters, normal mode frequencies and corresponding vibrational assignments of cis and trans isomers of OTP (C12H16) have been theoretically examined by means of B3LYP hybrid density functional theory (DFT) method together with 6-31G(d) and 6-31++G(d,p) basis sets. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated. Comparison between the experimental and theoretical results indicates that density functional B3LYP method is able to provide satisfactory results for predicting vibrational wavenumbers and trans isomer is supposed to be the most stable form of OTP molecule.     

study of liquid crystalline N -[4-(4- n -alkoxybenzoyloxy)-2-hydroxybenzylidene]methylanilines

New homologous series of N -[4-(4- n -alkoxybenzoyloxy)-2-hydroxybenzylidene]methylanilines [ n AH m M( n =1-8/10; m =2: ortho , m =3: meta , m =4: para )] were synthesized. They exhibited a nematic phase except for 1AH3M. The temperature dependence of their Raman spectra was observed in the spectral range of 900-1700 cm -1 . In one group of n AH m M compounds, the Raman band at about 1360 cm -1 abruptly decreased in intensity and wavenumber when the crystalline solid-liquid crystal phase transition was approached. In another group, the corresponding band increased through the phase transition. The bands have been assigned to the coupling mode between the in-plane CCH deformational vibration and the ring-N stretching vibration. Such a behaviour can be explained by the molecular conformation with different twist angles of the aniline ring in relation to the Schiff 's base plane of the molecule. Some n AH m Ms exhibited photochromism.     

Vibration assignment of carbon-sulfur bond in 2-thione-1,3-dithiole-4,5-dithiolate derivatives

The higher frequency peak near 1050 cm(-1) of the doublet in the infrared and Raman spectra of 2-thione-1,3-dithiole-4,5-dithiolate (DMIT) derivatives corresponds mainly to the stretching vibration of carbon-sulfur double bond in the terminal S=CS2 fragments of DMIT skeletons while the lower one corresponds mainly to the Fermi resonance peak between overtones of symmetric stretching vibration of two carbon-sulfur single bond in the S=CS2 fragment of DMIT skeletons and the higher frequency. On the other hand, the higher frequency near 500 cm(-1) corresponds mainly to the symmetric stretching vibration of two carbon-sulfur single bond in the S=CS2 fragments of DMIT skeletons while the lower one corresponds mainly to the symmetric stretching vibration of the four carbon-sulfur single bond in the S2C=CS2 fragments of DMIT skeletons.     

Raman spectroscopic studies on tropolone complexes with La, Nd, Sm, Yb

The complexes of tropolone (HL) with different lanthanide metals of lanthanum (La), neodymium (Nd), samarium (Sm), ytterbium (Yb) have been prepared respectively in the non-aqueous solution by the direct electrochemical oxidation of sacrificial metal anodes, and characterized by normal Raman spectroscopy. By comparing the spectra of the ligands and their complexes, the stretching vibrational band of OH disappeared in complexes, and the frequencies shifts of some relevant bands were observed, particularly for the stretching vibration of CO. In the low frequency region, new metal ion sensitive bands at 400-700 cm(-1) were observed, which could be assigned to the stretching vibrational mode of the bonding of lanthanide with oxygen. The stretching vibration of lanthanide-oxygen of tropolonate complexes showed a metal ion sensitivity. All the obvious change in spectral feature of Raman spectra revealed that CO and OH were coordinated with the center metal ions through oxygen atoms. Based on Raman results, the structures of the above complexes were proposed.     

Raman spectroscopic study of the tellurite minerals: rajite and denningite

Tellurites may be subdivided according to formula and structure. There are five groups based upon the formulae (a) A(XO3), (b) A(XO3).xH2O, (c) A2(XO3)3.xH2O, (d) A2(X2O5) and (e) A(X3O8). Raman spectroscopy has been used to study rajite and denningite, examples of group (d). Minerals of the tellurite group are porous zeolite-like materials. Raman bands for rajite observed at 740, and 676 and 667 cm(-1) are attributed to the nu1 (Te2O5)(2-) symmetric stretching mode and the nu3 (TeO3)(2-) antisymmetric stretching modes, respectively. A second rajite mineral sample provided a more complex Raman spectrum with Raman bands at 754 and 731 cm(-1) assigned to the nu1 (Te2O5)(2-) symmetric stretching modes and two bands at 652 and 603 cm(-1) are accounted for by the nu3 (Te2O5)(2-) antisymmetric stretching mode. The Raman spectrum of dennigite displays an intense band at 734 cm(-1) attributed to the nu1 (Te2O5)(2-) symmetric stretching mode with a second Raman band at 674 cm(-1) assigned to the nu3 (Te2O5)(2-) antisymmetric stretching mode. Raman bands for rajite, observed at (346, 370) and 438 cm(-1) are assigned to the (Te2O5)(2-)nu2 (A1) bending mode and nu4 (E) bending modes.