聚苯胺热掺杂十二烷基苯磺酸的反应过程及其结构

与传统的质子酸掺杂相比，采用具有功能性的两亲大分子对聚苯胺（PAN）掺杂，可以使产物的加工性和稳定性大大提高［1～3]．十二烷基苯磺酸（DBSA）是研究得比较多的掺杂酸之一，其掺杂过程一般都采用辅助溶剂，由此而引起PAN与DBSA结合程度低、掺杂效率低、溶剂需后处理?..     

掺杂率对乳液聚合制备聚苯胺结构性能的影响

对乳液聚合的十二烷基苯磺酸(DBSA)掺杂聚苯胺(PAn)进行不同pH值溶液浸泡处理。采用元素分析、红外光谱分析、X射线衍射及热失重分析等手段，研究了不同掺杂率对PAn结构性能以及PAn在普通有机溶剂中的溶解性能和导电性能的影响。结果表明：随DBSA掺杂率的增加，PAn的电导率及其在三氯甲烷中的溶解度增加，带有烷基长链的DBSA使PAn形成以DBSA为间隔的有序层状结构；而且合成的PAn-DBSA热稳定性良好。     

XPS研究聚苯胺的竞争掺杂行为

采用X射线光电子能谱（XPS）方法对不同反应体系下化学合成的聚苯胺（PANI）的结构和掺杂状况进行了研究。发现盐酸（HCl）掺杂的聚苯胺在样品后处理过程中易发生脱掺杂行为;在十二烷基苯磺酸钠（SDBS）和盐酸共存体系下合成聚苯胺时,对阴离子DBS-和Cl-发生竞争掺杂行为。结果表明DBS-与带正电荷聚苯胺链结合,起到了掺杂和诱导聚苯胺可溶性的作用,它的N1s和S2p谱图与单独采用十二烷基苯磺酸（DBSA）掺杂聚苯胺的谱图相似。但SDBS-HCl复合体系比单独采用DBSA体系更为有利。     

聚苯胺-TCNQ复合薄膜的微观结构与电学特性

聚苯胺 (ＰＡＮＩ)作为高聚物材料 ,具有稳定性好 ,易于合成等优点．它在化学传感器、显示器、光化学电池等光电器件上有着许多潜在的应用前景．目前导电聚苯胺材料的合成、薄膜的制备与表征正在受到人们的重视．由于聚苯胺很难溶于一般的有机溶剂 ,用化学方法通过聚合物溶液用旋涂或自组装的方法成膜具有很大的局限性 ,特别是不易得到实用化的薄膜产物．而用真空蒸发沉积方法制备聚苯胺薄膜却有成膜质量高、易于控制 ,能很好与电子及微电子加工工艺相接轨等优点［１ -３］．国外已有一些关于真空蒸发沉积聚苯胺薄膜的研究报导［２ -５］,但…     

侧链液晶聚合物相转变点的分子动力学模拟

液晶基本上可分为３类：向列型液晶、近晶型液晶和胆甾型液晶［１］．液晶材料的相转变温度的预测对选择和设计液晶材料具有非常重要的作用．本文用分子动力学模拟法对聚［ω－（４′－甲氧基联苯－４－氧基）己基］甲基丙烯酸酯（ＰＭ６ＭＰＰ）单链分子进行了研究,模拟...     

绝缘聚合物对聚苯胺复合物导电性能的影响

将十二烷基苯磺酸掺杂的聚苯胺(PAn DBSA)与乙烯丙烯酸共聚物(EAA)或聚烯烃弹性体(POE)进行溶液共混制得了PAn DBSA/EAA或PAn DBSA/POE导电复合物。研究了绝缘聚合物的化学结构对聚苯胺导电复合物形态结构及电性能影响。结果表明,极性聚合物EAA中的羧基能与PAn形成氢键并发生掺杂作用,复合物中卷曲的PAn主链能充分展开,导致PAn/EAA复合物具有非常低的逾渗域值(1.5%),PAn含量为20.0%时,电导率高达7.1S/cm。POE为非极性共聚物,与极性较强的PAn相容性较差,导致PAn/POE复合物具有较高逾渗域值(5.0%),PAn含量为20.0%时,电导率仅为3.0×10-5S/cm。     

聚苯胺在一些有机溶剂中溶解性

本文通过改变反应条件用化学方法制得了不同分子量的聚苯胺，考察了它们在有机溶剂中的溶解性．实验结果表明：分子量的大小是影响它们在有机溶剂中溶解度的主要因素，能在有机溶剂中溶解的只是聚苯胺中分子量较小的级分．我们还用聚苯胺（［η］＝０．４９ｄｌ／ｇ）与－ＣＯＣＩ封端的果对苯二甲酰对苯二胺（ＰＰＴＡ）进行嵌段共聚，经过产物的元素分析与计算结果比较，确定出特性黏数为０．４９ｄｌ／ｇ的聚苯胺平均分子量．     

导电聚苯胺与Fe3O4磁性纳米颗粒复合物的合成与表征

对十二烷基苯磺酸(DBSA)掺杂的导电聚苯胺(PAn-DBSA)的氯仿溶液,在pH为中性的条件下,采用“修饰-再掺杂(Modification-re-doped)法”合成了含有Fe₃O₄磁性纳米颗粒的导电聚苯胺复合物的有机溶液.用FTIR,XRD,TEM,UV-Vis和SQUID等对所得复合物进行了表征,结果表明,该复合物呈现超顺磁性和半导体的导电性,并具有较好的透明性.     

四种方法合成单一手性聚苯胺纳米纤维研究

以过硫酸铵或2,3-二氯-5,6-二氰基-1,4-苯醌（DDQ）为氧化剂,单一手性樟脑磺酸作为诱导酸及掺杂剂,在有机溶剂、水-有机溶剂和水溶剂体系中,采用四种不同方法分别进行了单一手性聚苯胺纳米纤维合成研究。通过扫描电子显微镜（SEM）、紫外可见光谱（UV-VIS）、X射线衍射（XRD）和圆二色谱（CD）等手段对自组装法、界面聚合法、低聚物辅助法与二次掺杂法等四种方法制备得到聚苯胺纳米纤维的形貌、结构及光学活性进行表征,对比分析后发现四种方法合成的掺杂态聚苯胺纳米纤维形貌、结构相似,但溶剂体系会影响最终产物的光学活性：水溶剂、有机溶剂体系中,得到的聚苯胺纳米纤维光学活性相反。     

苯胺在酪氨酸功能化的玻碳电极表面的聚合及应用——推荐一个综合化学实验

用电化学氧化法将酪氨酸（Tyr）通过C—N键共价键合在玻碳电极（GCE）表面,制备Tyr单层分子功能化的GCE（Tyr/GCE）。用循环伏安法在Tyr/GCE表面对苯胺进行电化学聚合,制备掺杂态聚苯胺（PAN）修饰的GCE（PAN-Tyr/GCE）。由于Tyr对PAN的掺杂作用,使PAN在中性甚至碱性介质中仍有较好的电化学活性,拓宽了聚苯胺的应用范围。用X射线光电子能谱（XPS）、红外光谱（IR）、紫外光谱（UV-Vis）及电化学方法对所得电极的结构和性能进行了表征。并研究了在中性介质中PAN-Tyr/GCE对抗坏血酸（AA）的电催化氧化。     

间甲酚溶液中掺杂聚苯胺的氧化-还原行为研究

在有、无外加恒定磁场(0.4T)条件下,采用乳液聚合法合成了十二烷基苯磺酸掺杂聚苯胺(PAn),通过傅立叶红外光谱(FT-IR)、在有/无外电场作用下产物/m-cresol溶液的电导率、pH及其颜色随温度变化的分析表征,系统研究了温度对PAn/m-cresol溶液中PAn氧化-还原(掺杂-脱掺杂)行为的影响.溶液电导率和pH的测试结果显示,溶液电导率与溶液中游离掺杂酸的浓度成正比,PAn的掺杂度随温度的升高而降低,随温度的降低而增大,且在相同温度下,有、无外电场作用时PAn/m-cresol溶液的电导率存在突跃.与无磁场条件下合成的PAn所制备的m-cresol溶液相比,磁场条件下合成的PAn所制备的m-cresol溶液电导率的突跃更加显著.经脱掺杂处理后的PAn/m-cresol溶液的电导率均较低,对温度变化的响应极其微弱,且在有、无外电场作用时不发生突跃.分析认为,这是由于外电场作用下m-cresol溶液中掺杂态的PAn分子发生了取向重排,而脱掺杂的PAn则无此变化.PAn在外电场作用下的取向重排及氧化-还原性均与其掺杂程度相关,掺杂程度越高,氧化-还原及取向重排越显著.     

Synthesis of Thermally Resistant Polyesterimides from p,p ′-Phenolphthalein-bis(trimellitic) Dianhydride and Primary Aromatic Diamines

Alternating polyesterimides soluble in m-cresol, dimethyl-formamide, and dimethyl sulfoxide have been obtained by the reaction of p,p′-phenolphthalein-bis(trimellitic) dianhydride with primary aromatic diamines. The course of reaction between dianhydride and diamines and the cyclization process of polyesteramidoacids have been studied. One-step synthesis of polyesterimides by polycyclization in m-cresol solution has been developed. The coatings from polyesterimides prepared possess good thermal stability and advantageous mechanical properties.     

Comparison of Photochemical Reactions of m-Cresol in Aqueous Solution and in Ice

We compared the photochemical reaction of m-cresol containing OH precursors such as H₂O₂, NO₂^- and NO₃^- in aqueous solution with those in ice. The results show that the conversion rate of m-cresol in aqueous solution was higher than that in ice. H₂O₂, NO₂^- and NO₃^- all accelerated the photoconversion of m-cresol in both aqueous solution and ice. The photochemical reactions of m-cresol obeys the first order kinetics equation. According to the photoproducts identified by GC-MS, we proposed that hydroxylation and nitration reactions occurred in both aqueous solution and ice. Coupling reaction was common in ice, however, in aqueous solution it was found only in UV system. Our results suggest that the photochemical reactions of m-cresol were different in aqueous solution and in ice.     

Synthesis of Poly(N-ethylaniline) Nanoparticles Synthesis and Characterization of Organically Soluble Conducting Poly(N-ethylaniline) Nanoparticles using Acrylic Acid as a Soft Template

In this paper, we report the synthesis of poly(N-ethylaniline) (PNETA) by using tartaric acid (TA) as an organic acid dopant by aqueous polymerization method of N-ethylaniline using ammonium per sulphate (APS) as an oxidant and acrylic acid (AA) as a soft template. This is a new polymerization method for the direct synthesis of the emeraldine salt form of poly(N-ethylaniline) in bulk quantity, which is soluble in organic solvents such as m-cresol and N-methyl pyrrolidinone. The prepared polymers were characterized by UV, FTIR, XRD, TGA, SEM and conductivity measurement studies. The results are discussed with reference to HCl doped poly(N-ethylaniline). It is observed that PNETA/TA/AA polymer is comparatively more soluble in m-cresol than that doped with HCl in its salt form. The formation of emeraldine salt phase and dopping process was confirmed by FTIR and UV-Vis spectroscropy. We demonstrate the effect of organic dopant on the morphology and conductivity of the PNETA. It was found that, PNETA doped with TA synthesized using acrylic acid (AA) as a soft template display higher doping level, crystallinity and solubility in common organic solvent. On the contrary, HCl doped polymer was lowered at doping level and amorphous in nature which reflects the role of organic dopant and soft template. X-ray diffraction studies indicate that the PNETA/TA/AA doped samples exhibit higher crystallinity, which indicates enhanced polymer sub-chain alignment as compared to HCl doped polymer. This is also manifested by the FTIR studies. SEM result also revealed the continuous morphology and sub-micrometer size, evenly distributed particles of the PNETA/TA/AA doped polymer.     

Refractometry of lyotropic mesophase systems: Ethyl cellulose/m-cresol and ethyl cellulose/acetic acid

An Abbé refractometer with a rotatable polarizer mounted on the eyepiece is used for determining the two principal refractive indices of birefringent concentrated solutions of ethyl cellulose in m-cresol and in acetic acid. At a certain concentration, birefringence appears for both systems, and the concentration agrees with that for the onset of iridescence (here defined as the critical concentration C_a for formation of the liquid-crystalline phase). The birefringence of concentrated solutions depends strongly on concentration and temperature and can be generalized by a master curve. The refractive index increments for both systems are almost independent of temperature at high concentrations.     

一种可溶性聚萘酰亚胺的合成与性能

本文合成了既带有一个苯环侧基又带2个醚键的萘二酐单体, 并采用该二酐单体与4,4′-ODA进行聚合得到了具有良好溶解性和耐热性的聚萘酰亚胺, 该PNI表现出了非常好的耐水解性能, 其耐水解性远远超过五元环聚酰亚胺.     

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

Uses for aromatic polyimides have developed rapidly in recent years due to their outstanding properties1,2. However, their applications have been limited in many fields because aromatic polyimides are normally insoluble and infusible. The poly (ether imide)s (PEI) prepared by the polymerization of bisphenol-A diphthalic anhydride (BPA dianhydride) and m-phenylenediamine (m-PDA) ,developed by General Electric Plastics and marketed under the trade name Ultem 1000, has excellent processabili…     

Curing kinetics of liquid-crystalline epoxy resins

By endcapping mesogenic rigid rod molecules with reactive epoxy groups a novel class of liquid-crystalline thermoset has been obtained. In fact is has been shown that the nematic molecular arrangement is sustained over the crosslinking reaction of liquid-crystalline epoxy resins when the curing reaction is carried out in the thermal stability range of the liquid-crystalline phase. Calorimetric analysis was used in characterizing the isothermal cure. An unsophisticated model is proposed for evaluating the activation energies of the crosslinking reaction. For liquid-crystalline epoxy resins lower activation energies result with respect to the cure reactions for non liquid-crystalline epoxy resins.     

A calorimetric study of the different thermal behaviour of DNA in the isotropic and liquid-crystalline states

A difference between the thermal behaviour of the isotropic and liquid-crystalline state of sonicated DNA in aqueous salt solution containing poly(ethyleneglycol)(PEG) has been demonstrated. On cooling, a different degree of renaturation of thermally denaturated DNA is observed between samples which form the isotropic state and more concentrated samples which on cooling form the cholesteric state.     

Preparation of processable polyaniline doped and complexed with anionic surfactant

Processable polyaniline doped and complexed with dodecylbenzenesulfonic acid was obtained by one-step micellar chemical polymerization of aniline in the presence of dodecylbenzenesulfonic acid. Homogeneous transparent suspension could be made by dispersing processable polyaniline in m-cresol without any precipitation. Polyaniline composite film blended with polymethylmethacrylate (PMMA) exhibits relatively high levels of conductivity at low volume fractions of the polyaniline, while keeping good mechanical properties, equivalent to those of the PMMA. © 1998 John Wiley & Sons, Ltd.