Use of photochemical reactions in flow injection: determination of oxalate in urine

The use of photochemical reactions in flow injection (FI) is reported. The irradiation of an FI reactor with a suitable source facilitates the development of the iron(III)-oxalate reaction, allowing the amperometric determination of the anion in the range 1.0-13.0 micrograms ml-1, with a relative standard deviation of 1.1% and a sampling frequency of 40 h-1. The proposed method was applied successfully to the determination of oxalate in urine samples.     

Indirect atomic absorption spectrometric determination of sulfate in human blood serum.

An indirect method for the determination of sulfate by atomic absorption spectrometry (AAS) is described. Sulfate forms a stable ion-association complex, [Cu(neocuproine)2]2+(SO4(2-)), in neutral medium, which can be extracted into isobutyl methyl ketone in the presence of a polar medium (methanol) with an efficiency higher than 98.0% and the extract can be analysed directly for copper (and hence indirectly for sulfate) by AAS. Measurement of the copper atomic absorption signal from the organic phase allows the indirect determination of 0.14-1.12 micrograms ml-1 of sulfate, giving a 450-fold increase in sensitivity over the conventional method of precipitation with barium. The limit of detection (3 sigma) is 3.2 ng ml-1 which is better than that of ion chromatography (0.15 micrograms ml-1). Indirect AAS allows the accurate assay of inorganic sulfate anion in biological fluids and tissues. The sulfate concentration determined by the proposed method in human blood serum (n = 6 in each instance) was 35.4-43.3 micrograms ml-1 in normal persons, 50.3-62.5 micrograms ml-1 in jaundice patients and 83.3-155.6 micrograms ml-1 in diabetic patients. A good correlation between measured sulfate and the sulfate added to blood serum was obtained.     

Extractive spectrophotometric determination of tungsten(VI) in alloy steels using ethopropazine hydrochloride.

Ethopropazine hydrochloride (EPH) has been proposed as a sensitive reagent for the spectrophotometric determination of tungsten(VI). The method is based on the formation of a chloroform-soluble yellow-colored ternary complex by the interaction of EPH and thiocyanate with tungsten(V). The complex exhibits the absorption maximum at 404 nm with Sandell's sensitivity value of 20.03 ng cm-2. The complex obeyed Beer's law in the concentration range of 1-15 micrograms ml-1 with an optimum concentration range of 2.3-12.9 micrograms ml-1. The effects of foreign ions in the determination of tungsten(VI) were investigated. The method has also been successfully applied to the analysis of alloy steels.     

Atomic absorption spectrometric determination of trace zinc in alloys and biological samples after preconcentration with [1-(2-pyridylazo)-2-naphthol] on microcrystalline naphthalene

An atomic absorption spectrometric method for the determination of trace amounts of zinc after adsorption of its [1-(2-pyridylazo)-2-naphthol] complex on microcrystalline naphthalene has been developed. This complex is adsorbed on microcrystalline naphthalene in the pH range 3.5-7.5 from large volumes of aqueous solutions of various alloys and biological samples with a preconcentration factor of 40. After filtration, the solid mass consisting of the zinc complex and naphthalene was dissolved with 5 ml of dimethylformamide and the metal was determined by flame atomic absorption spectrometry. Zinc can alternatively be quantitatively adsorbed on [1-(2-pyridylazo)-2-naphthol]-naphthalene adsorbent packed in a column and determined similarly. About 0.5 ng of zinc can be concentrated in a column from 200 ml of aqueous sample, where its concentration is as low as 2.5 pg ml-1. The calibration curve is linear in the range 0.1-6.5 ng ml-1 in dimethylformamide solution. Eight replicate determinations of 2 ng ml-1 of zinc gave a mean absorbance of 0.145 with a relative standard deviation of 1.5%. The sensitivity for 1% absorption was 0.061 ng ml-1. Various parameters, such as the effect of pH and the interference of a number of metal ions on the determination of zinc, have been studied in detail to optimize the conditions for the determination of zinc in various standard complex materials.     

Use of palladium(II) chloride as a colour-forming reagent for the determination of N-acetyl-L-cysteine in water and fluimukan injections

The formation of the complex between N-acetyl-L-cysteine and palladium(II) chloride in Britton-Robinson buffer solution in the pH range 2.08-8.00 was studied. The optimum conditions for this reaction were ascertained and a spectrophotometric method was developed for the determination of N-acetyl-L-cysteine in the concentration range 4.0-65.3 micrograms ml-1, using PdCl2 as the reagent. The detection limit was 1.63 micrograms ml-1 and the relative standard deviation varied from 0.63 to 1.92%. The method was applied to the determination of N-acetyl-L-cysteine in water and in injection solutions.     

Spectrofluorimetric study on the inclusion interaction between lomefloxacin and p-sulfonated calix[4]arene and its analytical application

The characteristics of host-guest complexation between p-sulfonated calix[4]arene (SC4A) and lomefloxacin (LMFX) were investigated by fluorescence spectrometry. A 1:1 stoichiometry for the complexation was established and an association constant of 6.48x10(4) l mol-1 at 25 degrees C was calculated by applying a deduced equation. The interaction mechanism of the inclusion complex was discussed and the various factors affecting the inclusion process were examined in detail. It was found that an appropriate amount of cationic surfactant cetyltrimethylammonium bromide (CTAB) can remarkably enhance the fluorescence intensity of the supramolecular complex system. Based on the obtained results, a novel sensitive spectrofluorimetric method for the determination of lomefloxacin based on supramolecular complex was developed with a linear range of 0.01-3.0 microg ml-1 and a detection limit of 0.008 microg ml-1, for the first time. The method was applied for the determination of lomefloxacin in pharmaceutical preparations successfully.     

Development and application of spectrophotometric methods for the determination of citalopram hydrobromide in dosage forms

Study was carried out to develop two simple, fast, accurate and sensitive spectrophotometric methods (A and B) for the determination of citalopram hydrobromide in commercial tablet formulations. In method A, UV spectrophotometer determined the contents of citalopram hydrobromide in tablets at 240 nm in methanol solvent. The linear range was 5-40 microg ml-1 with molar absorptivity 1.4x10(4) l mol-1 cm-1. While the method B based on the reaction of citalopram base as n-electron donor with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone as pi-acceptors to give highly colored complex species that absorb maximally at 590 nm. Beer's law was obeyed in the concentration limit of 10-250 microg ml-1 with molar absorptivity 3.3x10(3) l mol-1 cm-1 for citalopram hydrobromide. The limits of detection and limit of quantification was calculated and found to be 5.2 microg ml-1 and 17.4 microg ml-1 respectively. The proposed methods were found to be rapid, accurate, precise and sensitive for the determination of citalopram hydrobromide in commercial tablet formulations with out interferences from common additives encountered.     

Enhanced spectrofluorimetric determination of the pesticide warfarin by means of the inclusion complex with beta-cyclodextrin

The warfarin-beta-cyclodextrin inclusion complex alters the luminescent properties of warfarin. This feature allows the use of a spectrofluorimetric method for its determination that gives improved analytical performance. The spectral changes associated with the inclusion process allowed a value of 160 l mol-1 to be obtained for the complexation constant. Fluorescence intensity is linearly related to warfarin concentration for a quantification limit of from 0.2 to 4 micrograms ml-1. The relative standard deviation at the 1.5 microgram ml-1 level is 3.5%. The method was applied satisfactorily to the determination of warfarin in irrigation water.     

Fluorimetric determination of aluminium in serum

A convenient fluorimetric method for the routine determination of aluminium in serum has been developed using lumogallion [4-chloro-3-(2,4-dihydroxyphenylazo)-2-hydroxybenzene-1-sulphonic acid]. Losses of aluminium during deproteinisation of the serum were prevented by treatment with a combination of 20 or 30% m/V trichloroacetic acid (TCA) and 5% m/VTCA. Iron(III) was removed by extraction into chloroform with capriquat (methyltrioctylammonium chloride) as an Fe3+-lumogallion-capriquat ternary complex. The interference from Cu2+ was eliminated by using thiosulphate as a masking agent. The detection limit was 3.6 ng ml-1 and the calibration graph was linear up to 1.4 micrograms ml-1 of aluminium. Using the proposed method, the average concentration of aluminium in the serum of healthy subjects was found to be 6.8 ng ml-1, in agreement with values reported in the literature.     

Spectrophotometric determination of oxalate ion with N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II).

A simple and rapid spectrophotometric method for the determination of oxalate ion was established by the fading of a colored complex between N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II). Beer's law was obeyed in the concentration range of 0.1 - 2.0 microg cm(-3) for oxalate ion, with an effective molar absorptivity at 533 nm and the relative standard deviation being 8.0 x 10(3) dm(3) mol(-1) cm(-1) and 1.0% (n = 5), respectively. This proposed method has excellent reproducibility, and was applied to recovery tests of oxalate ion in tap water and human urine; the results were satisfactory. This is suggested that the method is based on the reaction of copper(II) to copper(I) with oxalate ion.     

Poly(vinyl chloride) matrix membrane electrode for the selective determination of heroin (diamorphine) in illicit powders

The potentiometric response characteristics of a poly(vinyl chloride) membrane electrode for heroin based on its ion-pair complex with tetraphenylborate were examined. The influence of pH, temperature and time on the performance of the electrode system was investigated. The electrode shows a near-Nernstian response over the heroin concentration range 10(-2)-10(-4) M with good precision. The mean relative standard deviation for the determination of heroin in 40 micrograms ml-1(-1) mg ml-1 aqueous heroin hydrochloride solutions is 1.2%. The electrode exhibits good selectivity for heroin in the presence of a number of adulterants and basic organic compounds commonly present in illicit heroin powders. The method was applied to the direct potentiometric determination of heroin in illicit powders (10-36% heroin) and the results agreed fairly well with those obtained by gas - liquid chromatography.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

Study of the reaction of proteins with Beryllon II-AlIII by the Rayleigh light scattering technique and its application

The determination of proteins with tetrasodium 2-(3,6-disulfo-8-hydroxynaphthylazo)-1,8-dihydroxynaphthalene-3,6-disulfonate (Beryllon II) by Rayleigh light scattering (RLS) was studied. The weak RLS of the Beryllon II-bovine serum albumin (BSA) complex can be greatly enhanced by the addition of Al3+ in the pH range 5.6-7.2; there was a maximum RLS platform at 400-420 nm. Based on the reaction between Beryllon II, Al3+ and proteins, a new method for the determination of proteins was developed. This method is very sensitive [0.20-41.42 micrograms ml-1 for BSA and 0.18-48.15 micrograms ml-1 for human serum albumen (HSA)], rapid (< 2 min), simple (one step) and tolerant towards most interfering substances. The effects of different surfactants were also examined. Four samples of protein in human serum were determined; the maximum relative error was no more than 5% and the recovery was 96-105%.     

Spectrophotometric determination of taurine in food samples with phenol and sodium hypochlorite as reagents and an ion-exchange clean-up

A simple and accurate spectrophotometric method is proposed for the determination of taurine in food samples using phenol and sodium hypochlorite as reagents, which form a blue colour with taurine at room temperature and pH 10.35. Ion exchange was used to improve the selectivity of the method. Absorbance measurements were made at 630 nm and the calibration graph was linear from 0 to 180 micrograms ml-1 of taurine with a slope of 0.00242 A (p.p.m.)-1. The precision for the determination of taurine (156 micrograms ml-1) was 0.8% (n = 10). The method was applied successfully to the determination of taurine in milk products and energy drinks.     

Determination of nickel in water by chemiluminescence

The acetone chemiluminescence determination of nickel in water was investigated. Optimization data for the determination of Ni2+ and interference data for over 20 species are provided. The limit of detection for Ni2+ by this method is 2.5 ng ml-1, and the linear dynamic range is from 10 ng ml-1 to 1 microgram ml-1. The application of the method to the determination of Ni2+ in river and waste waters is discussed.     

Determination of nucleic acids with crystal violet by a resonance light-scattering technique

For the first time, Crystal Violet (CV) was used to determine nucleic acid concentrations using the resonance light-scattering (RLS) technique. Based on the enhancement of the RLS of CV by nucleic acids, a new quantitative determination method for nucleic acids in aqueous solutions has been developed. At pH 5.03 and ionic strength 0.005 mol kg-1, the interaction of CV with nucleic acids results in three characteristic RLS peaks at 344.0, 483.0 and 666.0 nm. With 4.0 x 10(-5) mol l-1 of CV, linear relationships were found between the enhanced intensity of RLS at 666.0 nm and the concentration of nucleic acids in the range 0-2.5 micrograms ml-1 for herring sperm DNA, 0-4.0 micrograms ml-1 for calf thymus DNA and 0-4.5 micrograms ml-1 for yeast RNA. The limits of determination were 13.8 ng ml-1 for herring sperm DNA, 36.8 ng ml-1 for calf thymus DNA and 69.0 ng ml-1 for yeast RNA. The assay is convenient, rapid, inexpensive and simple.     

Complexation study of diclofenac with beta-cyclodextrin and spectrofluorimetric determination

The inclusional complexation between the anti-inflammatory pharmaceutical diclofenac and beta-cyclodextrin (beta-CD) was studied by potentiometry, spectrophotometry and spectrofluorimetry, in both acid and neutral pH. Guest-host 1:1 stoichiometries for the complexes in both media were determined, and their equilibrium constants were calculated. The values obtained from the different methods used are in very good agreement and are in the order of 10(3). From the analysis of the pKa value for diclofenac in both the absence and presence of beta-CD (4.84 and 4.90 respectively), it was inferred that in the inclusion complex the carboxylic group is located outside the cavity. Further structural characterization of the inclusate was carried out by means of 1H NMR spectra and AM1 semiempirical calculations. Based on the obtained results, a spectrofluorimetric method for the determination of diclofenac in the presence of beta-CD was developed in the range of 0-5 micrograms ml-1. Better limits of detection (0.03 microgram ml-1) and quantification (0.1 microgram ml-1) were obtained in this latter case with respect to those obtained in the absence of beta-CD. The method was satisfactorily applied to the quantification of diclofenac in pharmaceutical preparations.     

Sensitive determination of paraquat and diquat at the sub-ng ml-1 level by continuous amperometric flow methods.

Two methodologies are described for the determination of paraquat and diquat. The first is based on the pre-treatment of an electrode with a surfactant solution, which improves the electrochemical determination of the herbicides. Linear calibration graphs were obtained in the ranges 10-80 and 10-100 ng ml-1 for paraquat and diquat, respectively. The limits of detection were 6.32 for paraquat and 4.80 ng ml-1 for diquat. The method was applied to the determination of the herbicides in synthetic water samples. The second methodology is based on the preconcentration of paraquat and diquat in a minicolumn packed with a cation-exchange material. The determination ranges and detection limits depend on the sample volume used (5-50 ml). Thus, 50 ml of sample provides limits of detection of 0.016 and 0.020 ng ml-1 for paraquat and diquat, respectively. The applicability of the method was demonstrated with the determination of the herbicides in both synthetic and real water samples.     

Simultaneous kinetic determination of epinephrine and norepinephrine by the stopped-flow technique.

A stopped-flow method for the simultaneous determination of epinephrine and norepinephrine, two catecholamines with a wide spectrum of biological activity, is proposed. The method is based on the oxidation of these compounds with 1,10-phenanthroline-iron(III) complex, which is monitored by measuring the initial rate of change of the absorbance of the ferroin formed at 510 nm. The difference in kinetic behaviour between the two species was exploited by applying a modified version of the proportional-equation method for the resolution of epinephrine-norepinephrine mixtures at the micrograms ml-1 level over the ratio range 1:10-10:1, with an error of less than 5% and an average precision of about 2.5%. The method was successfully applied to the determination of the two catecholamines in pharmaceuticals.     

Capillary electrophoretic determination of oxalate in amniotic fluid

A capillary electrophoretic (CE) assay for oxalate has been applied to the quantitative determination of free oxalate in amniotic fluid. Indirect absorbance detection of oxalate is accomplished with a chromate-based background electrolyte modified with ethylenediaminetetraacetic acid (EDTA). Detection interference due to the presence of high levels (≈4 mg/ml) of inorganic chloride is eliminated through a direct sample clean-up procedure based on cation (Ag⁺-form) resins. Separation interference from amniotic fluid proteins is prevented through the use of a simple aqueous-based dilution procedure. This method for the determination of oxalate in amniotic fluid provides precision of ≈5% relative standard deviation (RSD). Within-day precisions for the oxalate response and migration time are better than 3% RSD and 1% RSD, respectively. Between-day precisions for the oxalate response and migration time are better than 6% RSD and 3% RSD, respectively. The analytical recovery of oxalate (1000 ng/ml) spiked into amniotic fluid was better than 96%. The limit of detection (LOD) for the method is ≈100 ng/ml oxalate. This method also shows promising results for the determination of oxalate in human blood plasma samples.