Synthesis of poly(β‐pinene)‐g‐poly(meth)acrylate by the combination of living cationic polymerization and atom transfer radical polymerization

New graft copolymers of β‐pinene with methyl methacrylate (MMA) or butyl acrylate (BA) were synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). β‐Pinene polymers with predetermined molecular weights and narrow molecular weight distributions (MWDs) were prepared by living cationic polymerization with the 1‐phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, and the resultant polymers were brominated quantitatively by N‐bromosuccinamide in the presence of azobisisobutyronitrile, yielding poly(β‐pinene) macroinitiators with different bromine contents (Br/β‐pinene unit molar ratio = 1.0 and 0.5 for macroinitiators a and b , respectively). The macroinitiators, in conjunction with CuBr and 2,2′‐bipyridine, were used to initiate ATRP of BA or MMA. With macroinitiator a or b , the bulk polymerization of BA induced a linear first‐order kinetic plot and gave graft copolymers with controlled molecular weights and MWDs; this indicated the living nature of these polymerizations. The bulk polymerization of MMA initiated with macroinitiator a was completed instantaneously and induced insoluble gel products. However, the controlled polymerization of MMA was achieved with macroinitiator b in toluene and resulted in the desired graft copolymers with controlled molecular weights and MWDs. The structures of the obtained graft copolymers of β‐pinene with (methyl)methacrylate were confirmed by ¹H NMR spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1237–1242, 2003     

Controlled polymerization of methyl acrylate for high‐molecular‐weight polymers by pentafluorophenylbis(triflyl)methane‐promoted group transfer polymerization using triisopropylsilyl ketene acetal

The group transfer polymerization (GTP) of methyl acrylate (MA) was studied using pentafluorophenylbis(triflyl)methane (C₆F₅CHTf₂) as the organocatalyst and 1‐trimethylsiloxy‐, 1‐triethylsiloxy‐, and 1‐triisopropylsiloxy‐1‐methoxy‐2‐methyl‐1‐propene (MTS^Me, MTS^Et, and MTS^iPr, respectively) as the initiators. The C₆F₅CHTf₂‐promoted GTP of MA using MTS^iPr proceeded in a living nature to produce poly(methyl acrylate)s (PMAs) with controlled molecular weights and narrow molecular weight distributions, which allowed the synthesis of high‐molecular‐weight PMA with the number‐average molecular weight (M_n(SEC)) of up to 108,000 and the polydispersity (M_w/M_n) of 1.07. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry measurement revealed that the obtained PMA possessed the chain end structure that originated from MTS^iPr, showing that the C₆F₅CHTf₂‐promoted GTP of MA proceeded without any side reactions. In addition, the kinetic study and the postpolymerization experiment supported the living manner of the polymerization. Moreover, the block copolymerization of MA and n‐butyl acrylate (nBA) smoothly proceeded to afford the well‐defined PMA‐block‐poly(n‐butyl acrylate) (PnBA). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cyclometalated 2‐phenylpyridine complex [RuII(o‐C6H4‐py)(MeCN)4]PF6 as a tunable catalyst for living radical polymerization

The cyclometalated complex [Ru^II(o‐C₆H₄‐py)(MeCN)₄]PF₆ ( 1 ) with a σ‐Ru? C bond and four substitutionally labile acetonitrile ligands mediates radical polymerization of different vinyl monomers, viz. n‐butyl acrylate, methyl methacrylate, and styrene, initiated by three alkyl bromides: ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, and 1‐phenylethyl bromide. The polymerization requires the presence of Al(OiPr)₃ and occurs uncontrollably as a conventional radical process. The variation of the molar ratio of the components of the reaction mixture, such as initiator, Al(OiPr)₃ and catalyst, affected the polymerization rates and the molecular weights but did not improve the control. A certain level of control has been achieved by adding 0.5 eq of SnCl₂ as a reducing agent. Tin(II) chloride decreased the rate of polymerization and simultaneously the molecular weights became conversion‐dependent and the polydispersities were also narrowed. Remarkably, the level of control was radically improved in the presence of excess of the poorly soluble catalyst ( 1 ), when the added amount of ( 1 ) was not soluble any more, i.e., under heterogeneous conditions, the system became adjustable and the living polymerization of all three monomers was finally achieved. Possible mechanisms of the ( 1 )‐catalyzed polymerization are discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4193–4204, 2008     

Combination of nitroxide‐mediated polymerization and SET‐LRP for the synthesis of high molar mass branched and star‐branched poly(n‐butyl acrylate) characterized by size exclusion chromatography and rheology

Branched and star‐branched polymers were successfully synthesized by the combination of two successive controlled radical polymerization methods. A series of linear and star poly(n‐butyl acrylate)‐co‐poly(2‐(2‐bromoisobutyryloxy) ethyl acrylate) statistical copolymers, P(nBA‐co‐BIEA)_x, were first synthesized by nitroxide‐mediated polymerization (NMP at T > 100 °C). The subsequent polymerization of n‐butyl acrylate by single electron transfer‐living radical polymerization (SET‐LRP at T = 25 °C), initiated from the brominated sites of the P(nBA‐co‐BIEA)_x copolymer, produced branched or star‐branched poly(n‐butyl acrylate) (PnBA). Both types of polymerizations (NMP and SET‐LRP) exhibited features of a controlled polymerization with linear evolutions of logarithmic conversion versus time and number‐average molar masses versus conversion for final M_n superior to 80,000 g mol^?1. The branched and star‐branched architectures with high molar mass and low number of branches were fully characterized by size exclusion chromatography. The Mark–Houwink Sakurada relationship and the analysis of the contraction factor (g′ = ([η]_branched/[η]_linear)_M) confirmed the elaboration of complex PnBA. The zero‐shear viscosities of the linear, star‐shaped, branched, and star‐branched polymers were compared. The modeling of the rheological properties confirmed the synthesis of the branched architectures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Simple and effective one‐pot synthesis of (meth)acrylic block copolymers through atom transfer radical polymerization

The synthesis of di‐ and triblock copolymers using atom transfer radical polymerization (ATRP) of n‐butyl acrylate (BA) and methyl methacrylate (MMA) is reported. In particular, synthetic procedures that allow for an easy and convenient synthesis of such block copolymers were developed by using CuBr and CuCl salts complexed with linear amines. Polymerizations were successfully conducted where the monomers were added to the reactor in a sequential manner. Poor cross‐propagation between poly(n‐butyl acrylate) (PBA) macroinitiators and MMA was minimized, and therefore control of molecular weights and distributions was realized, by using halogen exchange—a technique involving the addition of CuCl to the MMA during the chain extension of the PBA macroinitiator. High molecular weight (M_n ∼ 90,000) and low polydispersity (M_w /M_n < 1.35) ABA triblock copolymers were also prepared and their structure and properties in bulk have been preliminary characterized indicating the potential of ATRP for the production of all‐acrylic thermoplastic elastomers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2023–2031, 2000     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620     

Ru(II)‐mediated living radical polymerization: block and random copolymerizations of N,N‐dimethylacrylamide and methyl methacrylate

RuCl₂(PPh₃)₃ led to living radical copolymerization of N,N‐dimethylacrylamide (DMAA) and methyl methacrylate (MMA) in conjunction with a halide‐initiator (R‐X; CHCl₂COPh, CCl₃Br) and Al(Oi‐Pr)₃ in toluene at 80°C. Both the monomers were polymerized at almost the same rate into random copolymers, where the number‐average molecular weights (M_n) increased in direct proportion to weight of the obtained polymers, and the molecular weight distributions (MWDs) were narrow throughout the reactions (M_w/M_n = 1.2‐1.6). MMA was consumed faster in the copolymerization than in the homopolymerization, which was due to the interaction of DMAA with the ruthenium complex. The Ru(II)‐based initiating system was also effective in block copolymerization of DMAA and MMA.     

ATNRC and SET‐NRC synthesis of PtBA‐g‐PEO well‐defined amphiphilic graft copolymers

A series of new well‐defined amphiphilic graft copolymers containing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) side chains were reported. Reversible addition‐fragmentation chain transfer homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was first performed to afford a well‐defined backbone with a narrow molecular weight distribution (M_w/M_n = 1.07). The target poly(tert‐butyl acrylate)‐g‐poly(ethylene oxide) (PtBA‐g‐PEO) graft copolymers with low polydispersities (M_w/M_n = 1.18–1.26) were then synthesized by atom transfer nitroxide radical coupling or single electron transfer‐nitroxide radical coupling reaction using CuBr(Cu)/PMDETA as catalytic system. Fluorescence probe technique was employed to determine the critical micelle concentrations (cmc) of the obtained amphiphilic graft copolymers in aqueous media. Furthermore, PAA‐g‐PEO graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PEO side chains kept inert. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Hyperbranched polymers as scaffolds for multifunctional reversible addition–fragmentation chain‐transfer agents: A route to polystyrene‐core‐polyesters and polystyrene‐block‐poly(butyl acrylate)‐core‐polyesters

Polydisperse hyperbranched polyesters were modified for use as novel multifunctional reversible addition–fragmentation chain‐transfer (RAFT) agents. The polyester‐core‐based RAFT agents were subsequently employed to synthesize star polymers of n‐butyl acrylate and styrene with low polydispersity (polydispersity index < 1.3) in a living free‐radical process. Although the polyester‐core‐based RAFT agent mediated polymerization of n‐butyl acrylate displayed a linear evolution of the number‐average molecular weight (M_n) up to high monomer conversions (>70%) and molecular weights [M_n > 140,000 g mol^?1, linear poly(methyl methacrylate) equivalents)], the corresponding styrene‐based system reached a maximum molecular weight at low conversions (≈30%, M_n = 45,500 g mol^?1, linear polystyrene equivalents). The resulting star polymers were subsequently used as platforms for the preparation of star block copolymers of styrene and n‐butyl acrylate with a polyester core with low polydispersities (polydispersity index < 1.25). The generated polystyrene‐based star polymers were successfully cast into highly regular honeycomb‐structured microarrays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3847–3861, 2003     

Polymerization of sterically congested α‐alkylacrylates under high pressure

A series of α‐alkylacrylates, including methyl ethacrylate (MEA), methyl α‐propylacrylate, methyl α‐isopropylacrylate (MiPA), methyl α‐butylacrylate (MnBA), and methyl α‐isobutylacrylate (MiBA), were successfully polymerized at 65 °C under high pressure (1–9 kbar). In contrast to results obtained at ambient pressure, all monomers yielded high molecular weight polymers (number‐average molecular weight = 4–18 × 10⁴), except for MiPA (number‐average molecular weight = 8 × 10³), probably because of the high steric hindrance of the isopropyl group. Polymerization kinetics under high pressure were obtained for MEA, MnBA, and MiBA. Overall activation volumes were estimated to be ?14.9, ?17.0, and ?11.6 mL mol^?1 for MEA (3–7 kbar), MnBA (3–7 kbar), and MiBA (5–9 kbar), respectively. Extrapolation to ambient pressure provided rates of polymerization for these monomers unaffected by the ceiling temperature effect. These values were further used to quantitatively assess the steric influence exerted by the α‐substituent on the polymerizability of these sterically congested acrylates with Meyer's steric parameter. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 836–843, 2002; DOI 10.1002/pola.10161     

Ultrafast single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of acrylates initiated with iodoform in water at room temperature and catalyzed by sodium dithionite

Sodium dithionite in the presence of NaHCO₃ in water acts as a single‐electron‐transfer agent and facilitates the single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of acrylates initiated with iodoform at room temperature. The resulting α,ω‐di(iodo)polyacrylates can be used as macroinitiators for the SET–DTLRP of other acrylates. Ultrahigh‐molar‐mass poly(tert‐butyl acrylate) can be synthesized via the SET–DTLRP of tert‐butyl acrylate and has a very low weight‐average molecular weight/number‐average molecular weight ratio of 1.15. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2178–2184, 2005     

Synthesis of well‐defined cyclodextrin‐core star polymers

The synthesis of 21‐arm methyl methacrylate (MMA) and styrene star polymers is reported. The copper (I)‐mediated living radical polymerization of MMA was carried out with a cyclodextrin‐core‐based initiator with 21 independent discrete initiation sites: heptakis[2,3,6‐tri‐O‐(2‐bromo‐2‐methylpropionyl]‐β‐cyclodextrin. Living polymerization occurred, providing well‐defined 21‐arm star polymers with predicted molecular weights calculated from the initiator concentration and the consumed monomer as well as low polydispersities [e.g., poly(methyl methacrylate) (PMMA), number‐average molecular weight (M_n) = 55,700, polydispersity index (PDI) = 1.07; M_n = 118,000, PDI = 1.06; polystyrene, M_n = 37,100, PDI = 1.15]. Functional methacrylate monomers containing poly(ethylene glycol), a glucose residue, and a tert‐amine group in the side chain were also polymerized in a similar fashion, leading to hydrophilic star polymers, again with good control over the molecular weight and polydispersity (M_n = 15,000, PDI = 1.03; M_n = 36,500, PDI = 1.14; and M_n = 139,000, PDI = 1.09, respectively). When styrene was used as the monomer, it was difficult to obtain well‐defined polystyrene stars at high molecular weights. This was due to the increased occurrence of side reactions such as star–star coupling and thermal (spontaneous) polymerization; however, low‐polydispersity polymers were achieved at relatively low conversions. Furthermore, a star block copolymer consisting of PMMA and poly(butyl methacrylate) was successfully synthesized with a star PMMA as a macroinitiator (M_n = 104,000, PDI = 1.05). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2206–2214, 2001     

Star‐like PAA‐g‐PPO well‐defined amphiphilic graft copolymer synthesized by ATNRC and SET‐NRC reaction

A series of well‐defined amphiphilic star graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(propylene oxide) side chains were synthesized by the sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and atom transfer nitroxide radical coupling (ATNRC) or single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction followed by the selective hydrolysis of poly(tert‐butyl acrylate) backbone. A Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate, was first homopolymerized via RAFT polymerization using a new star‐like chain‐transfer agent with four arms in a controlled way to give a well‐defined star‐like backbone with a narrow molecular weight distribution (M_w/M_n = 1.23). The grafting‐onto strategy was used to synthesize the well‐defined PtBA‐g‐PPO star graft copolymers with narrow molecular weight distributions (M_w/M_n = 1.14–1.25) via ATNRC or SET‐NRC reaction between the Br‐containing PtBA‐based star‐like backbone and poly(propylene oxide) with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group using CuBr/PMDETA or Cu/PMDETA as catalytic system. PAA‐g‐PPO amphiphilic star graft copolymers were obtained by the selective acidic hydrolysis of star‐like PtBA‐based backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media and brine were determined by the fluorescence probe technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2084–2097, 2010     

Synthesis of starlike PtBA‐g‐PEO amphiphilic graft copolymer via highly efficient Cu‐catalyzed SET‐NRC reaction at ambient temperature

Two new amphiphilic star graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) (PEO) side chains with different molecular weights were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction under mild conditions. RAFT homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was mediated by a four‐armed chain transfer agent in a controlled way to afford a well‐defined starlike backbone with a narrow molecular weight distribution (M_w/M_n = 1.26). The target poly(tert‐butyl acrylate)‐g‐PEO (PtBA‐g‐PEO) star graft copolymers were synthesized by SET‐NRC reaction between Br‐containing PtBA‐based starlike backbone and PEO end functionalized with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group using copper/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalytic system at ambient temperature via grafting‐onto strategy. The critical micelle concentration values of the obtained amphiphilic star graft copolymers in aqueous media and brine were determined by fluorescence probe technique using pyrene as probe. Diverse micellar morphologies were formed by varying the content of hydrophilic PEO segment as well as the initial concentration of stock solution. In addition, poly(acrylic acid)‐g‐PEO double hydrophilic star graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA starlike backbone without affecting PEO side chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A styryl tipno‐based nitroxide as efficient mediator for the synthesis of multiblock polystyrenes and well‐grafted polymers

The chloromagnesium exchange of 4‐chlorostyrene provides an easy access to a new versatile polymerizable 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide (TIPNO)‐based nitroxide. Indeed, first, its alkoxyamine based on the α‐methyl benzyl radical fragment efficiently mediates the polymerization of styrene (respectively n‐butyl acrylate) to yield branched polystyrene [respectively poly(n‐butyl acrylate)] with alkoxyamine function as branch point and well‐defined branches. Second, the self‐condensing of this polymerizable nitroxide by manganese coupling affords a mixture of oligomeric linear polyalkoxyamines. Polymerization of styrene mediated with these polyalkoxyamines gives multiblock polystyrenes with alkoxyamine group as linker between polystyrene blocks and exhibits the following features: the synthesis of the polystyrene blocks is controlled as their average molecular weight M_n(block) increases linearly with conversion and their average dispersity M_w/M_n(block) decreases with it. At a given temperature, the molecular weight and the dispersity of the polyalkoxyamines weakly impact M_n(block) and M_w/M_n(block). In contrast, the molecular weight of the multiblock polystyrene increases linearly with conversion until reaching a constant value. The number of block is independent of the molecular weight of the polyalkoxyamines. These unusual results can be explained by the fact that during polymerization, mediating TIPNO‐based polymeric nitroxides with different lengths are generated and are exchanged. Finally the dispersity of the multiblock polystyrene is quite broad and lies between 1.7 and 2.8. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of well‐defined AB20‐type star polymers with cyclodextrin‐core by combination of NMP and ATRP

The synthesis of an AB₂₀‐type heteroarm star polymer consisting of a polystyrene arm and 20‐arms of poly(methyl methacrylate) or poly(tert‐butyl acrylate) was carried out using the combination of nitroxide‐mediated polymerization (NMP) and atom transfer radical polymerization (ATRP). The NMP of styrene was carried out using mono‐6‐[4‐(1′‐(2″,2″,6″,6″‐tetramethyl‐1″‐piperidinyloxy)‐ethyl)benzamido]‐β‐cyclodextrin peracetate ( 1 ) to afford end‐functionalized polystyrene with an acetylated β‐cyclodextrin (β‐CyD) unit (prepolymer 2 ) with a number‐average molecular weight (M_n) of 11700 and a polydispersity (M_w/M_n) of 1.17. After deacetylation of prepolymer 2 , the resulting polymer was reacted with 2‐bromoisobutyric anhydride to give end‐functionalized polystyrene with 20(2‐bromoisobutyrol)s β‐CyD, macroinitiator 4 . The copper (I)‐mediated ATRP of methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) was carried out using macroinitiator 4 . The resulting polymers were isolated by SEC fractionation to produce AB₂₀‐type star polymers with a β‐CyD‐core, 5 . The well‐defined structure of 5 with weight‐average molecular weight (M_w)s of 13,500–65,300 and M_w/M_n's of 1.26–1.28 was demonstrated by SEC and light scattering measurements. The arm polymers were separated from 5 by destruction with 28 wt % sodium methoxide in order to analyze the details of their characteristic structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4271–4279, 2005     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010