Mode transition in homogenous dielectric barrier discharge in argon at atmospheric pressure

The influence of driving frequency on the discharge regime of a homogenous dielectric barrier discharge in argon at atmospheric pressure is studied through a one-dimensional self-consistent fluid model. The simulation results show that the discharge exhibits five notable discharge modes, namely the Townsend mode, stable glow mode, chaotic mode, asymmetric glow, and multiple period glow mode in a broad frequency range. The transition mechanisms of these modes should be attributed to the competition between the applied voltage and the memory voltage induced by the surface charges.     

负介电常数材料和负磁导率材料的双层结构中电磁波模式分析

研究了双层单负材料结构中电磁波的模式,主要分析了不同模式的产生条件,讨论了这些模式与材料参数之间的关系.当材料参数满足平均介电常数和磁导率为零时出现隧穿模式.当满足波导模产生条件时,波导模式的电磁波在材料两边的半无限真空中以消逝波存在,在双层单负材料的界面处也可以出现较强的局域场. 关键词： 单负材料 传播模式 隧穿模式 波导模式     

低差分模式时延少模光纤的有限元分析及设计

针对少模光纤展开研究, 利用Comsol软件计算其模场分布、有效折射率, 进而分析光纤的差分模式时延. 通过分析不同结构参量对模式数量和差分模式时延的影响, 设计出了两种低差分模式时延的少模光纤, 即带有外下陷的渐变式光纤和多阶少模光纤. 波长在1530–1570 nm 范围内, 带有外下陷的渐变式光纤支持四模传输, LP₁₁, LP₂₁, LP₀₂模式的差分模式时延的绝对值小于0.015 ps·m^-1; 多阶少模光纤支持两模传输, LP₁₁的差分模式时延低于0.185 ps·m^-1. 两种少模光纤均具有良好的差分模式时延特性, 适于在模分复用技术中应用.     

8mm TE01–HE11高功率模式变换器的研究

 从弯曲波纹波导中广义耦合波方程出发，进行数值优化迭代，得到在8mm波段，TE₀₁–HE₁₁高功率高效率模式变换器的设计。计算中考虑了金属壁所带来的欧姆损耗，并采用了相位重匹配技术以提高转换效率。给出了一组优化设计尺寸及计算结果。     

用涨落模型解释有关主被动锁模Nd:YAG激光器的若干问题

应用锁模理论的涨落模型分析研究了已报道的若干主被动锁模Nd:YAG激光器的实验现象.对锁模的阈值行为,锁模几率随调制器调制功率的变化规律和系统的稳定性随可饱和吸收染料的相对浓度的变化规律等实验结果从理论上进行了比较成功的解释.     

负介电常数材料和负磁导率材料的双层结构中电磁波模式分析

研究了双层单负材料结构中电磁波的模式,主要分析了不同模式的产生条件,讨论了这些模式与材料参数之间的关系.当材料参数满足平均介电常数和磁导率为零时出现隧穿模式.当满足波导模产生条件时,波导模式的电磁波在材料两边的半无限真空中以消逝波存在,在双层单负材料的界面处也可以出现较强的局域场.     

8mmTE01—HE11高功率模式变换器的研究

从弯曲波纹波导中广义耦合波方程出发，进行数值优化迭代，得到在８ｍｍ波段，ＴＥ０１－ＨＥ１１高功率高效变换器的设计。计算中考虑了金属壁所带来的区分经损耗，并采用了相位重匹配技术以提高转换效率。给出了一组优化设计尺寸及计算结果。     

过模波导器件的迭代设计方法

从模式保留和转换的角度, 过模波导器件可分为模式转换器、模式保留器和模式综合器. 传统方法只解决其中一种器件的设计或者对器件的某个指标进行改进. 本文在深入分析耦合波理论之后, 提出了过模波导器件的迭代设计方法, 从原理上解决了过模波导器件的设计问题. 该方法能够统一设计三类过模波导器件, 通过添加不同的结构控制方法, 可得到转换效率更高、带宽更宽、结构更紧凑、满足不同工程需求的器件, 而且还能有效设计一些新型器件. 给出了两个设计实例: 双频TM₀₁–TE₁₁模式变换器和光壁馈源喇叭. 双频TM₀₁–TE₁₁模式变换器的两个工作频点为8.75 GHz和10.3 GHz, 波导半径为16 mm, 在两个频点转换效率为99%以上. 光壁馈源喇叭实现TE₁₁模式向高斯束的转换. CST仿真结果验证了这两个器件设计的正确性和有效性. 关键词： 耦合波理论 模式转换器 模式过渡器 迭代法     

关于激光模谱分析实验模式图的讨论

对近代物理实验中激光模谱分析实验激光模式图的具体表示形式及所表达的物理含义进行了分析及讨论.     

V波段圆波导TE_(01)模式激励器

V波段圆波导TE01模式激励器由矩形TE10模式到矩形TE20模式变换器和矩形TE20模式到圆波导TE01模式变换器组成。采用H面(磁面)转弯激励的方式实现矩形TE10模式到矩形TE20模式的变换;根据圆波导TE01模式的场分布特性,引入过模波导实现了矩形TE20到圆波导TE01的变换。计算结果表明设计的激励器转换效率在95%以上;模式纯度在98%以上的相对带宽可达4.2 GHz;其中在43.4 GHz处的最大转换效率为99.08%,纯度为99.20%。     

高功率速调管TE_(11)-HE_(11)模式变换器的设计及实验验证

基于模式匹配法编制了分析内壁刻槽TE11-HE11圆波导模式变换器数值计算程序;采用该程序为工作频率为30.5GHz的高功率速调管设计了一半径为16mm的TE11-HE11模式变换器。计算表明该变换器在2.6%的带宽内转换效率在98.8%以上,实验结果表明该变换器性能良好。     

高功率毫米波圆波导TM01—TE11模式变换分析

 在数值研究高功率毫米波TM₀₁—TE₁₁光滑弯曲圆波导模式变换的基础上，对弯曲波导的几何结构进行了优化分析。在模式耦合理论的基础上，优化出了比较好的几何结构，并发现了圆波导半径、弯曲圆波导曲率和频率以及频带宽度之间的变化规律。以此数据设计的模式变换器的转换效率可达99%，带宽超过29.8%。     

THE DESIGNS OF HIGH EFFICIENCY LAUNCHER OF QUASI-OPTICAL MODE CONVERTER FOR HIGH POWER GYROTRONS

A high efficiency launcher of quasi-optical (QO) mode converters for high power gyrotrons have been designed and tested. A helical cut launcher radiates the RF power via its straight cut onto the first phase correcting mirror. The launchers have been optimized for the TE_31.8 mode at 170 GHz and TE_22.6 mode at 110 GHz by numerically optimizing a launcher surface. The helical cut of the launcher has been optimized by taking the taper angle into account. Further more, the amplitude of the surface perturbation have been optimized for improved focusing in order to reduce the diffraction losses at the helical cut. Low power measurement shows a good agreement with the design. High efficiency characteristics of the design have also been calculated on the assumption of frequency downshift due to the thermal expansion of the cavity and stepwise frequency tuning by changing the operating mode. Besides, the possibility of high efficiency launcher for higher mode is discussed, and these results give the prospect to high efficiency long pulse gyrotrons.     

Analysis of High Power Millimeter Wave Waveguide Mode Converters with Input Mode Mixture

Based on the coupled mode theory, this paper presents the study on the influence of input mode mixture in circular oversized waveguide mode converters. Three kinds of commonly used waveguide mode converters, including the waveguide mode converters with varying wall radius or small axis perturbations, and the waveguide mode converters with bent structures, are taken as the examples. The results show that the spurious input modes do not simply superimpose onto the output modes, and in some cases they may deteriorate the conversion efficiency for the main output mode. Methods for transforming such spurious input mode mixture simultaneously into the main output mode are also presented in this paper.     

紧凑型圆极化模式转换器

 提出了一种结构紧凑的、能将圆波导TM01模或同轴波导TEM模转换为圆极化TE₁₁模的高功率微波模式转换器。该转换器由前后2个十字转门波导结对接组成,前者首先把圆波导TM₀₁模转变为4个矩形波导中的TE₁₀模,4个矩形波导的长度不等;后者再把4个经过不同相位延迟的矩形波导TE₁₀模转变为圆波导中的圆极化TE₁₁模。对所设计的1.75 GHz模式转换器进行了仿真研究,在中心频率上,该模式转换器转换效率为99%,轴比为0.03 dB;在1.575~1.900 GHz的频率范围内,转换效率大于90%,轴比小于2.5 dB,对应带宽为18.6%。     

高功率CW锁模Nd:YAG激光器动力学特性研究

本文对具有热效应的锁模激光器的动力学特性进行了研究。采用内腔声光振幅调制器对CW Nd:YAG激光器进行锁模,在泵浦功率为3.5千瓦时,获得了平均功率达10W的锁模激光输出,其脉冲幅值稳定度优于4%。     

新经典MHD效应与内扭曲模本征方程

本文从一简化的新经典ＭＨＤ方程组出发，利用气球模表示及多尺度近似等方法，在ｑ＝１磁面附近的过渡层内导出了包含新经典ＭＨＤ效应的内扭曲模本征方程。与从前相关工作的比较表明，新经典ＭＨＤ效应对通常采用的磁流体或电阻磁流体内扭曲模本征方程，均产生十分重要的修正。     

圆波导TM_(01)-TE_(11)模式变换器

提出了一种在圆波导中添加金属分割片及半边金属管壳的结构以实现圆波导TM01-TE11模式转换。通过金属分割片将圆波导分成两个半圆区域:其中一个半圆区域为空波导,另一半圆区域为填充一定厚度金属管壳的空波导。在S波段对设计的中心频率为2.8GHz的物理模型进行数值模拟与实验研究,模拟结果表明:在中心频率2.8GHz转换效率为99.56%,反射率低于0.01;在2.716～2.946GHz频带内转换效率大于90%,S11小于-10dB。实验中测试到的S11参数与模拟结果基本一致,证明了该变换器技术方案的可行性和模拟结果的正确性。     

Observation of relaxation modes in room temperature ferroelectric liquid crystal mixtures

The dielectric measurements in SmC* and SmA phases of a room temperature ferroelectric liquid crystal mixture FLC-6980 in the cells of different thickness in planer alignment have been carried out in the frequency range 100 Hz to 1 MHz. A relaxation mode (called NRM) whose dielectric increment is less than the Goldstone mode has been observed in the SmC* phase. This mode appears due to the surface effect. Goldstone mode and the soft mode was observable in the vicinity of SmC*-SmA transition temperature (T _C*A). The dielectric parameters of the Goldstone mode, new mode and the soft mode have been studied as a function of frequency and temperature. The calculated values for f_NRM, δε^NRM and distribution parameter α_NRM are found to be 325 kHz, 6 and 0.156 for 5μm thick planer cell at 37°C. It is seen that in the vicinity of theT _C*A, soft mode obeys the Curie-Weiss law given by mean field theory. The results have been compared with materials of large spontaneous polarization.     

Three-dimensional mode coupling around a seamount

A recently developed three-dimensional normal-mode model is adopted to investigate mode coupling around a seamount in a deep water environment. As indicated by the theoretical analysis and verified by the numerical results, strong mode coupling occurs at the edge of a seamount under certain conditions. Therefore, mode coupling is critical for the investigation of the acoustic field in the presence of a seamount. In addition, the issue regarding the number of sectors assuring convergence is also presented. T...