Mechanism of Adsorption of Dyes and Phenols from Water Using Activated Carbons Prepared from Plum Kernels

The kinetics and mechanism of adsorption of two commercial dyes (BR22, AB25), phenol, and 3-chlorophenol from water on activated carbons were studied at 30 degrees C. The activated carbons were prepared from plum kernels, and the activation temperature and time tested were in the ranges 750-900 degrees C and 1-4 h, respectively. Three simplified kinetic models including a pseudo-first-order, a pseudo-second-order, and an intraparticle diffusion model were tested. It was shown that the adsorption of both phenols could be fitted to a pseudo-second-order rate law, and that of both dyes could be fitted to an intraparticle diffusion model. Kinetic parameters were calculated and correlated with the physical properties of the adsorbents. Copyright 2000 Academic Press.     

Mechanism of adsorption of different humic acid fractions on mesoporous activated carbons with basic surface characteristics

The effects of the humic acid (HA) nature and the activated carbon (AC) surface chemistry on the effectiveness of HA removal were investigated. Brown (BHA) and gray (GHA) humic acid fractions of different structure and physicochemical properties were tested in the adsorption process using mesoporous ACs. The modification of chemical structure and surface properties of AC was achieved by ammonization (AC/N) and hydrogen treatment (AC/H). Both approaches led to a decrease in the oxygen content followed by an increase in the carbon basicity, maintaining the porous texture of AC nearly unaltered. Over twice higher removal degree of BHA and GHA was observed for the modified ACs. The kinetics of adsorption of HA fractions have been discussed using the pseudo-second-order model and the intraparticle diffusion model. All ACs showed a higher adsorption capacity toward BHA compared to GHA, which is mainly attributed to the lower molecular weight of BHA. The shape of the equilibrium isotherms indicates a strong competition between water and HA molecules for adsorption sites of the carbon surface.     

Adsorption of lignite-derived humic acids on coal-based mesoporous activated carbons

The adsorption by a coal-based mesoporous activated carbon of humic acids (HAs) isolated from two Polish lignites was studied. For comparison, a commercial Aldrich humic acid was also included into this study. The differences in chemical structure and functional groups of HAs were determined by elemental analysis and infrared spectroscopy DRIFT. Two activated carbons used differed in terms of mesopore volume, mesopore size distribution, and chemical properties of the surface. The kinetics of adsorption of HAs have been discussed using three kinetic models, i.e., the first-order Lagergren model, the pseudo-second-order model, and the intraparticle diffusion model. It was found that the adsorption of HAs from alkaline solution on mesoporous activated carbon proceeds according to the pseudo-second-order model. The correlation coefficients were close to 1. The intraparticle diffusion of HA molecules within the carbon particle was identified to be the rate-limiting step. Comparing the two activated carbons, the carbon with a higher volume of pores with widths of 10-50 nm showed a greater removal efficiency of HA. An increase in the Freundlich adsorption capacity with decreasing carbon content of HA was observed. Among the HAs studied, S-HA shows characteristics indicating the highest contribution of small-size fraction. The S-HA was removed by both activated carbons to the highest extent. The effect of pH solution on the adsorption of HA was examined over the range pH 5.4-12.2. It was found that the extent of adsorption decreased with decreasing pH of the solution.     

Comparative Adsorption of Crystal Violet and Congo Red onto ZnCl2 Activated Carbon

In this study, the adsorption characteristics of crystal violet (CV) and Congo red (CR) dyes from the aqueous solution onto prepared activated carbon were examined. The activated carbon was prepared from wood apple shell by chemical activation with ZnCl₂. The parameters studied were the effect of contact time, initial dyes concentration, and pH of solution. The experimental equilibrium data were analyzed and fitted to Langmuir, Freundlich, and Temkin isotherms. The maximum monolayer adsorption capacities of CV and CR dyes were found to be 142.85 and 83.33 mg per gram of prepared activated carbon at 298 K. The kinetic data obtained at different concentrations were analyzed using pseudo-first-order, pseudo-second-order, and intra-particle diffusion models. Batch adsorption kinetic studies showed that the adsorption of dyes followed pseudo-second-order kinetics and at four different concentrations of both dyes, indicating that chemisorption is the rate-limiting step. Thermodynamic studies reveal that the removal of dyes from aqueous solution onto activated carbon was a spontaneous, feasible, and endothermic process at a temperature greater than standard equilibrium temperature.     

Kinetic modeling of liquid-phase adsorption of phosphate on dolomite

The adsorption of phosphate from aqueous solution on dolomite was investigated at 20 and 40 degrees C in terms of pseudo-second-order mechanism for chemical adsorption as well as an intraparticle diffusion mechanism process. Adsorption was changed with increased contact time, initial phosphate concentration, temperature, solution pH. A pseudo-second-order model and intraparticle diffusion model have been developed to predict the rate constants of adsorption and equilibrium capacities.The activation energy of adsorption can be evaluated using the pseudo-second-order rate constants. The adsorption of phosphate onto dolomite are an exothermically activated process. A relatively low activation energy and a model highly fitting to intraparticle diffusion suggest that the adsorption of phosphate by dolomite may involve not only physical but also chemisorption. This was likely due to its combined control of chemisorption and intraparticle diffusion. However, for phosphate/dolomite system chemical reaction is important and significant in the rate-controlling step, and for the adsorption of phosphate onto dolomite the pseudo-second-order chemical reaction kinetics provides the best correlation of the experimental data.     

Kinetic modeling of liquid-phase adsorption of reactive dyes on activated carbon

In this paper, adsorption equilibrium and kinetics of three reactive dyes from their single-component aqueous solutions onto activated carbon were studied in a batch reactor. Effects of the initial concentration and adsorbent particle size on adsorption rate were investigated Adsorption equilibrium data were then correlated with several well-known equilibrium isotherm models. The kinetic data were fitted using the pseudo-first-order equation, the pseudo-second-order equation, and the intraparticle diffusion model. The respective characteristic rate constants were presented. A new adsorption rate model based on the pseudo-first-order equation has been proposed to describe the experimental data over the whole adsorption process. The results show that the modified pseudo-first-order kinetic model generates the best agreement with the experimental data for the three single-component adsorption systems.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.     

Adsorption of tannic acid, humic acid, and dyes from water using the composite of chitosan and activated clay

Chitosan is a well-known excellent adsorbent for a number of organics and metal ions, but its mechanical properties and specific gravity should be enhanced for practical operation. In this study, activated clay was added in chitosan slurry to prepare composite beads. The adsorption isotherms and kinetics of two organic acids (tannic acid, humic acid) and two dyes (methylene blue, reactive dye RR222) using composite beads, activated clay, and chitosan beads were compared. With composite beads as an adsorbent, all the isotherms were better fitted by the Freundlich equation. The adsorption capacities with composite beads were generally comparable to those with chitosan beads but much larger than those with activated clay. The pseudo-first-order and pseudo-second-order equations were then screened to describe the adsorption processes. It was shown that the adsorption of larger molecules such as tannic acid (MW, 1700 g mol(-1)), humic acid, and RR222 from water onto composite beads was better described by the pseudo-first-order kinetic model. The rate parameters of the intraparticle diffusion model for adsorption onto such adsorbents were also evaluated and compared to identify the adsorption mechanisms.     

杉木活性炭吸附处理水溶液中的尼古丁

用不同孔径及化学性质的活性炭对尼古丁水溶液进行吸附研究. 以杉木屑为原料, 分别用氯化锌化学活化法和水蒸气物理活化法制备活性炭, 并分别命名为AC-Z和AC-H. 同时选用椰壳基商品活性炭作为对比吸附剂, 命名为AC-C. 采用比表面积孔径测定分析仪及Boehm滴定法对活性炭进行表征, 分别测定其比表面积、孔径分布和表面官能团含量. 吸附实验主要考虑吸附时间、温度和尼古丁溶液的初始浓度三个因素, 实验数据分析结果表明微孔有利于物理吸附的进行, 而表面酸性官能团及金属原子作为吸附活性位的作用更加重要. 由改变温度对各样品的吸附量影响也能说明活性位在吸附中的作用. AC-Z拥有较多的活性位, 温度变化时尼古丁的吸附量先升高后减小, 这主要是由于适合的温度能加快尼古丁分子的离解并促使其与活性位相结合, 而过高的温度会造成尼古丁分子动能增加, 导致分子间碰撞的机率和强度增大, 使吸附在活性炭表面的尼古丁分子脱落. AC-H和AC-C由较多的微孔和不同程度的活性位组成, 优先发生物理吸附, 并且伴随发生吸附剂表面分子团簇现象, 其吸附趋势与AC-Z相反. 动力学研究表明活性炭对尼古丁的吸附反应非常迅速, 并且符合准二阶动力学程模型. 各热力学参数ΔG⁰, ΔH⁰和ΔS⁰的计算结果表明吸附剂对尼古丁的吸附为吸热和自发性过程.AC-Z和AC-H的ΔH⁰值远低于AC-C, 说明吸附剂表面的活性位对尼古丁分子有强烈的吸引作用, 所以吸附相同数量吸附质分子所需的吸附热更小, 这也说明了活性位在吸附过程中发生作用.     

Removal of Congo red from aqueous solutions by neem saw dust carbon

Neem sawdust was used to develop an effective carbon adsorbent. This adsorbent was used for the removal of Congo Red (CR) from aqueous solution. The data suggest that the pH of aqueous solutions influences CR removal due to the decrease of removal efficiency with increasing pH. An optimal pH < 3 for the adsorption of CR onto neem sawdust carbon (NSDC) was determined. The experimental data were analysed by the Langmuir, Freundlich, Redlich-Peterson, Toth, Temkin, Sips and Dubinin-Radushkevich models of adsorption. Three simplified kinetic models based on pseudo-first-order, pseudo-second-order and intraparticle diffusion equations were used to describe the adsorption process. It was shown that the adsorption of CR could be described by the pseudo-second-order equation, suggesting that the adsorption occurs as a chemisorption process. The results indicate that the NSDC can be used as a low cost adsorbent alternative to commercial activated carbon for the removal of dyes from wastewaters.     

Kinetic modeling of adsorption of di-2-pyridylketone salicyloylhydrazone on silica gel

The kinetics of DPKSH (di-2-pyridylketone salicyloylhydrazone) adsorption onto silica gel has been investigated at (25+/-1) degrees C and pH 1 and 4.7. The kinetics of adsorption of DPKSH is discussed using three kinetic models, the first-order Lagergren model, the pseudo-second-order model, and the intraparticle diffusion model. The adsorption of DPKSH, at pH 1 and 4.7, onto silica gel proceeds according to the pseudo-second-order model and the correlation coefficients were very close to 1. The intraparticle diffusion of DPKSH molecules within the silica gel particles was identified as the rate-limiting step. The parameters of the pseudo-second-order model are q(max,calc)=1.02 x 10(-4) and 1.5 x 10(-4) g DPKSH/g silica; k(2)=3.01 x 10(4) and 9.67 x 10(4) h(-1)g silica/g DPKSH, respectively, for pH 1 and 4.7.     

Adsorption of methylene blue onto jute fiber carbon: kinetics and equilibrium studies

Jute fiber obtained from the stem of a plant was used to prepare activated carbon using phosphoric acid. Feasibility of employing this jute fiber activated carbon (JFC) for the removal of Methylene blue (MB) from aqueous solution was investigated. The adsorption of MB on JFC has found to dependent on contact time, MB concentration and pH. Experimental result follows Langmuir isotherm model and the capacity was found to be 225.64 mg/g. The optimum pH for the MB removal was found to be 5-10. The kinetic data obtained at different concentrations have been analyzed using a pseudo-first-order, pseudo-second-order equation, intraparticle diffusion and Elovich equation. Among the kinetic models studied, the intraparticle diffusion was the best applicable model to describe the adsorption of MB onto JFC.     

Adsorptive removal of malachite green and Rhodamine B dyes on Fe3O4/activated carbon composite

This study demonstrates the adsorption experiments of toxic dyes malachite green (MG) and Rhodamine B (RB) on Fe₃O₄-loaded activated carbon (AC). AC, which is known to be a high-capacity adsorbent, was aimed to be easily separated from aqueous media by loading it with Fe₃O₄. Fe₃O₄-loaded AC was prepared by the coprecipitation method and named magnetic activated carbon (M-AC), and the produced M-AC was characterized by x-ray diffraction (XRD), thermogravimetric analysis (TGA), and pH_pzc analyses. MG and RB adsorption by the M-AC was performed separately by batch technique and the effects of adsorbent amount, solution pH, and initial dye concentration on the adsorption were explored. Maximum removal efficiencies were found to be 96.11% for MG and 98.54% for RB, and the Langmuir isotherm model was the most fitted isotherm model for the adsorption. The kinetic and thermodynamic studies showed that the adsorption proceeded via the pseudo-second-order kinetic model and endothermic in-nature for both dyes.     

Waste cigarette filters: activated carbon as a novel sorbent for uranium removal

Uranium is important in the nuclear fuel cycle as both as an energy source and as radioactive waste. Herein, activated carbon (AC) prepared from waste cigarette filters by convenient carbonization and functionalization was chosen as the raw materials for radionuclides adsorption. Batch adsorption experiments showed that AC presented comparable UO₂²⁺ adsorption capacity (106 mg g^?1) and very outstanding selectivity. The adsorption process accorded with Langmuir model and the pseudo-second-order kinetics model well. This work combines the waste cigarette filters with the radioactive nuclear treatment materials, which may provide a new strategy for the future treatment of waste cigarette butts.

     

Adsorption of chlorinated organic compounds from water with cerium oxide-activated carbon composite

Adsorptive removal of dichloromethane, chloroform, and carbon tetrachloride from aqueous solutions at 25 °C by activated carbon (AC) that was loaded with cerium oxide nanoparticles (CeO₂-NP/AC) was investigated. The developed adsorbent was characterized by scanning electron microscope (SEM), FTIR spectrophotometer, X-ray diffraction (XRD), and thermal gravimetric analysis (TGA). The effect of contact time, initial concentration, and the adsorbent dosage were also studied. The equilibrium and kinetics of adsorption were studied in a batch-type adsorption system, and the equilibrium experimental data were analyzed using Langmuir, Freundlich, and Temkin isotherm models. Freundlich adsorption isotherm showed the best fit for the equilibrium adsorption data. Three adsorption kinetic models, pseudo first- and second-order, and intraparticle diffusion models were applied to test the kinetic data. Kinetic characterization of the adsorption process onto CeO₂-NP/AC is well-described by the pseudo second-order model, and the adsorption best-fit by the intraparticle diffusion model. Our study shows that at optimum conditions, 82.72%, 99.40% and 89.42% of dichloromethane, chloroform, and tetrachloride, respectively, were removed by CeO₂-NP/AC, at concentration between 0.25 and 5.00 g/L.     

Effect of electrolyte nature on kinetics of remazol yellow G removal by electrocoagulation

The present study describes an electrocoagulation process for the removal of remazol yellow G from dye solutions using Iron as the anode and Steel as the cathode. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were used to analyze the kinetic data obtained at different concentrations in different conditions. The adsorption kinetics was well described by the pseudo-second-order kinetic model.     

Kinetic and isotherm studies of Cu(II) adsorption onto H3PO4-activated rubber wood sawdust

Adsorption of Cu(II) from aqueous solution onto H(3)PO(4)-activated carbon using rubber wood sawdust (RSAC) was investigated in a batch system. Kinetic and isotherm studies were carried out by considering the effects of various parameters, such as initial concentration, contact time, pH, and temperature. The optimal pH value for Cu(II) adsorption onto RSAC was found to be 6.0. Thermodynamic parameters such as standard Gibbs free energy (DeltaG(0)), standard enthalpy (DeltaH(0)), and standard entropy (DeltaS(0)) were evaluated by applying the Van't Hoff equation. The thermodynamics of Cu(II) adsorption onto RSAC indicates its spontaneous and exothermic nature. Langmuir, Freundlich, and Temkin isotherms were used to analyze the equilibrium data at different temperatures. The Langmuir isotherm fits the experimental data significantly better than the other isotherms. Adsorption kinetics data were tested using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. Kinetic studies showed that the adsorption followed a pseudo-second-order reaction. The initial sorption rate, pseudo-first-order, pseudo-second-order, and intraparticle diffusion rate constants for different initial concentrations were evaluated and discussed. Adsorption mechanism studies revealed that the process was complex and followed both surface adsorption and particle diffusion. The rate-controlling parameter and effective diffusion coefficient were determined using the Reichenberg plot. It was found that the adsorption occurs through film diffusion at low concentrations and at higher concentration the particle diffusion becomes the rate-determining step.     

Surface-modified carbon black for As(V) removal

This paper reports the results of the adsorption performance of As(V) removal by a commercial carbon black and its H2SO4-modified form in a single-ion situation. The influence of different process parameters and the physicochemical principles involved were studied in detail. Acid modification caused morphological changes in the virgin carbon black as evidenced by BET surface area measurements and SEM study. FTIR spectra showed the introduction of sulfonic acid group in the parent carbon due to H2SO4 treatment. TGA analysis revealed higher weight loss characteristics of the modified carbon, demonstrating the creation of functional groups. The point of zero charge (pH pzc) of the modified carbon black is highly acidic (3.5) compared to commercial carbon black (6.4). It directly infers the generation of acidic functional moieties in the carbon black. The adsorption experiments were carried out following batch equilibrium techniques. The kinetics and thermodynamics of adsorption were investigated to unveil the mechanism and nature of the adsorption process, respectively. The kinetic parameters of different models were calculated and discussed. The kinetics of adsorption can be expressed by a pseudo-second-order model and intraparticle diffusion was not the rate-determining step. Dependence of pH on adsorption showed maximum metal uptake in the range of 4-5 and inferred surface complexion as the principal mechanism of adsorption. The equilibrium adsorption data were modeled using Freundlich, Langmuir, and Dubinin-Kaganer-Radushkevich (DKR) isotherm equations and the corresponding isotherm parameters were calculated and discussed in detail.     

Sorption characteristics of an economical sorbent material used for removal radioisotopes of cesium and europium

Application study for the evaluation of sorption characteristics of sawdust as an economical sorbent material used for decontamination of radioisotopes cesium and europium from aqueous solution has been carried out in the present work. In this respect, sawdust (untreated and treated by HNO₃) has been prepared from the commercial processing of wood for furniture production. Pore properties of the activated carbon such as BET surface area, pore volume, pore size distribution, and pore diameter were characterized by N₂ adsorption and DFT software. Radiotracer method onto sawdust from aqueous solutions was studied in a batch technique with respect to pH, contact time, temperature. The kinetics of adsorption of Eu³⁺ and Cs⁺ have been discussed using five kinetic models namely, pseudo-first-order model, pseudo-second-order model, Elovich equation, intraparticle diffusion model, and modified Freundlich equation that have been tested in order to analysis the experimental data. Kinetic parameters and correlation coefficients were determined. It was shown that the second-order kinetic equation could describe the sorption kinetics for two metal ions. The metal uptake process was found to be controlled by intraparticle diffusion. Thermodynamic parameters, such as ΔH, ΔG and ΔS, have been calculated by using the thermodynamic equilibrium coefficient obtained at different temperatures. The obtained results indicated that endothermic nature of sorption process for both ^152+154Eu and ¹³⁴Cs onto sawdust.