Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Dissimilar pH-dependent adsorption features of bovine serum albumin and α-chymotrypsin on mica probed by AFM

We studied bovine serum albumin (BSA) and α-chymotrypsin adsorption onto mica surfaces over a large pH range by atomic force microscopy (AFM) measurements in liquid. Data analyses (height, roughness and roughness factor) brought new insights on the conformation of proteins in soil environments, with mica as a model of soil phyllosilicates and non-hydrophobic surfaces. Validation of AFM approach was performed on BSA, whose behavior was previously described by nuclear magnetic resonance and infra-red spectroscopic methods. Maximum adsorption was observed near the isoelectric point (IEP). A stronger interaction and a lower amount of adsorbed proteins were observed below the IEP, which contrasted with the progressive decrease of adsorption above the IEP. We then studied the adsorption of α-chymotrypsin, a proteolytic enzyme commonly found in soils. AFM pictures demonstrated a complete coverage of the mica surface at the IEP in contrast to the BSA case. Comparison of the AFM data with other indirect methods broadened the understanding of α-chymotrypsin adsorption process through the direct display of the protein adsorption patterns as a function of pH.     

Participation of electrolyte cations in albumin adsorption onto negatively charged polymer latices

The participation of electrolyte cations in the adsorption of bovine serum albumin (BSA) onto polymer latices was investigated. The latices used were hydrophobic polystyrene (PS), and hydrophilic copolymers, i.e., styrene (St)/2-hydroxyethyl methacrylate(HEMA) copolymer [P(St/HEMA)] and styrene/acrylamide (AAm) copolymer [P(St/AAm)]. Three kinds of electrolyte cations (Na⁺, Ca²⁺, Mg²⁺) were used as the chloride. The amount of BSA adsorbed in every cation medium showed a maximum near the isoelectric point (iep, pH about 5) of the protein. The amounts of BSA adsorbed onto copolymer latices (except in the acidic pH region lower than the iep) were considerably smaller than that onto PS latex because of the steric repulsion and the decrease in the hydrophobic interaction between BSA and copolymer latices. In the acidic pH region, there was little difference in the amount of BSA adsorbed in every cation medium. However, in the pH region higher than the iep, the amounts of BSA adsorbed (particularly onto PS latex) in divalent cations (Ca²⁺ and Mg²⁺) media were relatively greater compared with that in a monovalent (Na⁺) one. This result was interpreted on the basis of the differences in such effects of electrolyte cations as dehydration power, suppression of the electrostatic repulsion, and binding affinity to BSA molecule. Ion Chromatographic estimation of the amounts of electrolyte cations captured upon BSA adsorption (in pH > 5) revealed that divalent cations were incorporated into the contact interface between the latex and BSA molecule so as to prevent the accumulation of anion charge and facilitate the protein adsorption.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

1. INTRODUCTION Chitosan is a hydrolyzed derivative of chitin and belongs to a family of linear unbranched polysaccharides which contain large amounts of 1,4-linked-2-amino-2-deoxy-β-D-glucan residues. The presence of free amine groups in chitosan enhances the solubility and reactivity of this polymer. Interest in modifying chitosan by using glutaraldehyde has recently increased. The derivatized polymers have been employed for many applications [1~2], including protein immobilization…     

Interaction of dissolved proteins with spherical polyelectrolyte brushes

We consider the adsorption of bovine serum albumin (BSA) on spherical polyelectrolyte brushes (SPB). The SPB consist of a solid polystyrene core of 100nm diameter onto which linear polyelectrolyte chains (poly(acrylic acid), (PAA)) are grafted. The adsorption of BSA is studied at a pH of 6.1 at different concentrations of added salt and buffer (MES). We observe strong adsorption of BSA onto the SPB despite the effect that the particles as well as the dissolved BSA are charged negatively. The adsorption of BSA is strongest at low salt concentration and decreases drastically with increasing amounts of added salt. The adsorbed protein can be washed out again by raising the ionic strength. The various driving forces for the adsorption are discussed. It is demonstrated that the main driving force is located in the electrostatic interaction of the protein with the brush layer of the particles. All data show that the SPB present a new class of carrier particles whose interaction with proteins can be tuned in a well-defined manner.     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

In this article,a spherical chitosan gel crosslinked by epichlorohydrin was prepared.It was then loaded with copper ions to produce a metal chelate affinity adsorbent for protein.The uptake of bovine serum albumin(BSA)by the affinity adsorbent was investigated.and the adsorption capacity for BSA as high as 40mg/g-wet beads was observed.The adsorption equilibrium data was well correlated by the Langmuir equation.The adsorption was considerably affected by pH.In additio.The amount of BSA adsorbed onto the beads decreased with the increasing of aqueous phase ionic strength,so adsorbed BAS can be desorbed by adjusting pH orionic strength of the solution.     

Selective Desorption of Intercalated Bovine Serum Albumin and Lysozyme by Organically Modified Montmorillonite

The organically modified montmorillonite (M‐Mt) was applied as an adsorbent for the purification of bovine serum albumin (BSA). In order to differentiate the selectivity and perform the purification of BSA, two kinds of proteins, BSA and lysozyme (LYZ) were mixed together and prepared at different pH, which could change the electrical charges on the surfaces of the proteins. BSA and LYZ can be adsorbed at the lower pH into the organically modified montmorillonite, which could be confirmed by powder X‐ray diffraction (XRD) in the d‐value increased after the adsorption of proteins. However, there is only BSA desorption was observed, approved by the method of Sodium dodecyl sulfate (SDS)‐polyacrylamide gel electrophoresis (PAGE), from this adsorbed protein mixture when the pH of the solution was adjusted and optimized. These results indicate that there is electrostatic interaction between a suitably modified montmorillonite and proteins BSA and LYZ to perform the selective desorption from BSA in the mixture of these proteins.     

Probing protein adsorption onto mercaptoundecanoic acid stabilized gold nanoparticles and surfaces by quartz crystal microbalance and zeta-potential measurements

The adsorption characteristics of three proteins [bovine serum albumin (BSA), myoglobin (Mb), and cytochrome c (CytC)] onto self-assembled monolayers of mercaptoundecanoic acid (MUA) on both gold nanoparticles (AuNP) and gold surfaces (Au) are described. The combination of quartz crystal microbalance measurements with dissipation (QCM-D) and pH titrations of the zeta-potential provide information on layer structure, surface coverage, and potential. All three proteins formed adsorption layers consisting of an irreversibly adsorbed fraction and a reversibly adsorbed fraction. BSA showed the highest affinity for the MUA/Au, forming an irreversibly adsorbed rigid monolayer with a side-down orientation and packing close to that expected in the jamming limit. In addition, BSA showed a large change in the adsorbed mass due to reversibly bound protein. The data indicate that the irreversibly adsorbed fraction of CytC is a monolayer structure, whereas the irreversibly adsorbed Mb is present in form of a bilayer. The observation of stable BSA complexes on MUA/AuNPs at the isoelectric point by zeta-potential measurements demonstrates that BSA can sterically stabilize MUA/AuNP. On the other hand, MUA/AuNP coated with either Mb or CytC formed a reversible flocculated state at the isoelectric point. The colloidal stability differences may be correlated with weaker binding in the reversibly bound overlayer in the case of Mb and CytC as compared to BSA.     

Adsorption of egg albumin onto methylated yeast biomass

A new biosorbent, methylated yeast (MeYE), was prepared for the adsorptive separation of proteins from aqueous solutions. Yeast was methylated in a 0.1 M HCl methyl alcohol solution at room temperature. About 80% of the carboxylic groups of yeast could be methylated within 9 h. The adsorption of egg albumin onto MeYE was studied to evaluate the protein adsorption ability of MeYE. At near neutral pH, egg albumin was scarcely adsorbed onto unmethylated yeast and the adsorbed amount of egg albumin increased with increasing methylation degree. The amount of egg albumin adsorbed onto MeYE increased with increasing pH from 4 to 7 and steeply decreased above pH 7. The Langmuir isotherm was applied to determine the apparent adsorption constant and the saturated adsorbed amount of egg albumin on MeYE. Both the apparent adsorption constant and the saturated adsorbed amount increased with the degree of methylation. The saturated adsorbed amount of egg albumin onto MeYE having methylation degree 77% was 8.41 x 10(-6) mol g(-1) or 0.378 gg(-1) at near neutral pH.     

染料配体固相萃取剂的制备及萃取性能

脲醛树脂-zro2复合微球;染料配体;固相萃取剂     

Dynamic Behaviors and Morphology Change of Anionic Phospholipid DPPG Monolayer Caused by Bovine Serum Albumin at Air-Water Interface

The interaction between bovine serum albumin (BSA) and the anionic 1.2-dipalmitoyl-snglycero- 3-(phospho-rac-(1-glycerol)) (sodium salt) (DPPG) phospholipid at different subphase pH values was investigated at air-water interface through surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing surface pressure-mean molecular area (π-A) isotherms, the limiting molecular area in the closed packing state-the concentration of BSA (A_lim-[BSA]) curves, the compressibility coefficient-surface pressure (C_S^-1-π) curves and the difference value of mean molecular area-the concentration of BSA (ΔA-[BSA]) curves, we obtained that the mean molecular area of DPPG monolayer became much larger when the concentration of BSA in the subphase increased at pH=3 and 5. But the isotherms had no significant change at different amount of BSA at pH=10. In addition, the amount of BSA molecules adsorbed onto the lipid monolayer reached a threshold value when [BSA]>5×10^-8 mol/L for all pHs. From the surface pressure-time (π-t) data, we obtained that desorption and adsorption processes occurred at pH=3, however, there was only desorption process occurring at pH=5 and 10. These results showed that the interaction mechanism between DPPG and BSA molecules was affected by the pH of subphase. BSA molecules were adsorbed onto the DPPG monolayers mainly through the hydrophobic interaction at pH=3 and 5, and the strength of hydrophobic interaction at pH=3 was stronger than the case of pH=5. At pH=10, a weaker hydrophobic interaction and a stronger electrostatic repulsion existed between DPPG and BSA molecules. AFM images revealed that the pH of subphase and [BSA] could affect the morphology features of the monolayers, which was consistent with these curves. The study provides an important experimental basis and theoretical support to understand the interaction between lipid and BSA at the air-water interface.     

Adsorption of bovine serum albumin onto poly(methyl methacrylate) stereocomplex films with a molecularly regulated nanostructure

Stereoregular poly(methyl methacrylate)s (PMMAs) were stepwise assembled on a quartz crystal microbalance (QCM) substrate after the immersion of the QCM into alternating acetonitrile solutions at ambient temperature. A quantitative QCM analysis at each step showed stereocomplex formation on the substrate surface. The adsorption of bovine serum albumin (BSA) onto stereocomplex films with a molecularly regulated nanostructure was analyzed quantitatively. The adsorption constant and the maximum adsorption amount, calculated by the assumption of Langmuir‐type adsorption, showed that BSA adsorbed with a relatively weak interaction onto the stereocomplex films. The BSA adsorption onto the stereocomplex films occurred in an end‐on manner, with a smaller adsorption constant than for that onto individual spin‐coated films. The amount of BSA adsorbed was significantly affected by the molecular weight of syndiotactic PMMA. Attenuated total reflection spectra indicated that BSA adsorbed onto the films with or without denaturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1807–1812, 2003     

Protein Adsorption onto Nanosized Hydroxyapatite Particles for Controlled Drug Release

Nanosized hydroxyapatite(nsHAp) was synthesized to examine its possibility as a controlled release carrier of protein. To achieve effective protein release from nanosized hydroxyapatite, the study of the adsorptive properties of protein on nsHAp and different influence parameters such as pH, calcium, and phosphate concentrations during the adsorption process is necessary. Ovalbumin(OVA) was selected as the model of growth factors. The results show that the amount of OVA adsorbed onto nsHAp in acetic buffer(pH=3.6) is more than that in acetic buffer(pH=5.6) because of the electric interaction. The amount of OVA adsorption in phosphate buffer solution(PBS) is smaller than that in acetic buffer because of surface complexation and surface hydroxylation. The presence of Ca2 dramatically increases the adsorbed amount of OVA in acetic buffer on maintaining the same pH. Meanwhile, the release kinetics of OVA adsorbed onto nsHAp(nsHAp-OVA) was also examined. The amount of released OVA in PBS(pH=5.6) was significantly smaller than that released in solution of pH=7.0. All the results suggest that nanosized hydroxyapatite particles could be successfully used as controlled released carrier of protein.     

Effect of electrostatic interaction on the adsorption of globular proteins on octacalcium phosphate crystal film

The electrostatic effect on the adsorption of globular proteins, such as bovine serum albumin (BSA), hen egg white lysozyme (LZM), and beta-lactoglobulin (beta-Lg), on octacalcium phosphate (OCP)-like crystal thin films was investigated. A poorly crystalline thin film was synthesized on a tissue culture polystyrene (TCP) surface and used as a model surface in this study. The solution pH clearly affected the electrostatic properties of both proteins and surface. The adsorbed amounts obtained at quasi-steady state were readily related to the solution pH for each protein. The adsorption rate is fast during the initial period and levels off gradually. The maximum adsorbed mass occurred at pH 7 for BSA and at pH 9 for LZM. beta-Lg adsorbed similar amounts at pHs lower than 9, but the adsorbed mass decreased at pHs higher than 9 where electrostatic repulsion exists. The pH values where the maximum adsorbed mass occurred may be considered as the conditions where electrostatic attraction is most favorable. The adsorbed mass of beta-Lg was the greatest among the proteins of interest while BSA adsorbed the least despite its greater molecular mass. LZM falls into the intermediate region. According to these observations, BSA has undergone conformational changes that prevent further adsorption to a greater extent than the others. A simple relationship between the adsorption rate and the electrostatic properties was not established. However, the order of magnitude of the adsorption rate at the initial period tends to be the same as that of maximum adsorbed mass for each protein.     

牛血清白蛋白在超薄纳米二氧化钛膜表面的印迹与吸附

基于溶胶凝胶分子印迹方法,以溶胶二氧化钛TiO2为基质印迹了牛血清白蛋白分子。用1%的NaOH溶液可有效地除去纳米TiO2印迹膜中的模板分子。采用石英晶体微天平现场技术,研究了牛血清白蛋白在超薄纳米TiO2膜表面的吸附行为。研究表明,牛血清白蛋白在印迹膜和非印迹膜上的吸附量都随溶液浓度增加而增大,印迹膜具有吸附的特异性和可再生性,其吸附量是非印迹膜的3~5倍;在非印迹膜上的吸附符合Langmuir吸附模型,而在印迹膜上的吸附符合allosteric吸附模型;牛血清白蛋白在非印迹膜上的吸附量先随pH升高而增大,当pH为5左右时达到最大值,随后吸附量又随pH的增大而减小;而在印迹膜上其吸附量仅随pH增大而增大。     

牛血清蛋白在聚甲基丙烯酸甲酯微球表面的吸附

血清蛋白在聚合物微球上的吸附在生物传感器、细胞分离、药物输送体系,人造器官及固相免疫分析等方面都有很重要的研究价值，因此近二十年来受到了越来越多的重视．     

Adsorption and protein-induced metal release from chromium metal and stainless steel

A research effort is undertaken to understand the mechanism of metal release from, e.g., inhaled metal particles or metal implants in the presence of proteins. The effect of protein adsorption on the metal release process from oxidized chromium metal surfaces and stainless steel surfaces was therefore examined by quartz crystal microbalance with energy dissipation monitoring (QCM-D) and graphite furnace atomic absorption spectroscopy (GFAAS). Differently charged and sized proteins, relevant for the inhalation and dermal exposure route were chosen including human and bovine serum albumin (HSA, BSA), mucin (BSM), and lysozyme (LYS). The results show that all proteins have high affinities for chromium and stainless steel (AISI 316) when deposited from solutions at pH 4 and at pH 7.4 where the protein adsorbed amount was very similar. Adsorption of albumin and mucin was substantially higher at pH 4 compared to pH 7.4 with approximately monolayer coverage at pH 7.4, whereas lysozyme adsorbed in multilayers at both investigated pH. The protein-surface interaction was strong since proteins were irreversibly adsorbed with respect to rinsing. Due to the passive nature of chromium and stainless steel (AISI 316) surfaces, very low metal release concentrations from the QCM metal surfaces in the presence of proteins were obtained on the time scale of the adsorption experiment. Therefore, metal release studies from massive metal sheets in contact with protein solutions were carried out in parallel. The presence of proteins increased the extent of metals released for chromium metal and stainless steel grades of different microstructure and alloy content, all with passive chromium(III)-rich surface oxides, such as QCM (AISI 316), ferritic (AISI 430), austentic (AISI 304, 316L), and duplex (LDX 2205).     

Profiling protein-surface interactions of multicomponent suspensions via flow cytometry

This study presents the use of flow cytometry as a high-throughput quantifiable technique to study multicomponent adsorption interactions between proteins and surfaces. Flow cytometry offers the advantage of high-throughput analysis of multiple parameters on a very small sampling scale. This enables flow cytometry to distinguish between individual adsorbent particles and adsorbate components within a suspension. As a proof of concept study, the adsorption of three proteins--bovine serum albumin (BSA), bovine immunoglobulin gamma (IgG) and fibrinogen--onto five surface-modified organosilica microsphere surfaces was used as a model multicomponent system for analysis. By uniquely labeling each protein and solid support type with spectrally distinguishable fluorescent dyes, the adsorption process could be "multiplexed" allowing for simultaneous screening of multiple adsorbate (protein) and adsorbent (particle surface) interactions. Protein adsorption experiments quantified by flow cytometry were found to be comparable to single-component adsorption studies by solution depletion. Quantitative distribution of the simultaneous competitive adsorption of BSA and IgG indicated that, at concentrations below surface saturation, both proteins adsorbed onto the surface. However, at concentrations greater than surface saturation, BSA preferentially adsorbed. Multiplexed particle suspensions of optically encoded particles were modified to produce a positively and negatively charged surface, a grafted 3400 MW poly(ethylene glycol) layer, or a physisorbed BSA or IgG layer. It was observed that adsorption was rapid and irreversible on all of the surfaces, and preadsorbed protein layers were the most effective in preventing further protein adsorption.