Effects of polymerization conditions on the in vitro hydrolytic degradation of plaques of poly(dl-lactic acid-block-ethylene glycol) diblock copolymers

In the case of poly(lactic acid) stereocopolymers, it has been shown that the hydrolytic degradation of derived devices depends very much on whether zinc lactate or tin octoate was used to polymerize lactides. In contrast, no effect was found in the case of nanoparticles derived from poly(dl-lactic acid)-block-poly(ethylene glycol) copolymers obtained by anionic polymerization of dl-lactide initiated by the sodium salt of monomethoxypoly(ethylene glycol) or by coordination-insertion polymerization of dl-lactide initiated by monomethoxypoly(ethylene glycol) in the presence of tin octoate as catalyst. To understand the difference of behaviour, in vitro hydrolytic degradation of thick plates made of the same copolymers but under different conditions was investigated. Changes were monitored by ¹H Nuclear Magnetic Resonance, Size Exclusion Chromatography, Electrospray Mass Spectrometry and Capillary Zone Electrophoresis. It is shown that chain cleavage occurred from the very beginning of degradation and that plates disintegrated after 13 weeks. In all cases, degradation proceeded faster inside than at the surface, in contrast to what was observed for nanoparticles. Tin-type copolymer plates degraded more slowly than sodium macroalcoholate-type ones and were sensitive to purification conditions, in contrast to the latter.     

Synthesis, characterization and biodegradation of butanediamine-grafted poly(dl-lactic acid)

Novel butanediamine-grafted poly(dl-lactic acid) polymers (BDPLAs) were synthesized via a series of chemical bulk modifications in this study. Briefly, maleic anhydride (MAH) was first grafted onto the side chain of poly(dl-lactic acid) (PDLLA) molecules via melt free radical copolymerization using benzoyl peroxide (BPO) as initiator to get maleic anhydride-grafted PDLLA polymers (MPLAs); thereafter butanediamine (BDA) was immobilized onto grafted anhydride groups in MPLAs via N-acylation reaction to obtain the desired BDPLAs. Gel permeation chromatography with multi-angle laser light scattering (GPC-MALLS), FT-IR, ¹³C NMR and XPS were employed to qualitatively characterize these synthesized polymers. Rhodamine-carboxyl interaction method and ninhydrin reaction were further used to quantitatively determine the graft ratio of MAH (MAH%) in MPLAs and the graft ratio of BDA (BDA%) in BDPLAs, respectively. The degradations of BDPLAs, PDLLA and MPLAs were investigated by observation of the changes of the pH value of incubation medium, molecular weight and weight loss ratio for a time interval of 12 weeks in vitro, respectively. The results revealed that grafting butanediamine onto PDLLA has weakened or neutralized the acidity of PDLLA degradation products. A uniform degradation of BDPLAs was observed in comparison with an acidity-induced auto-accelerating degradation featured by PDLLA and MPLAs. The biodegradation behaviors of BDPLAs are tunable by controlling the content of BDA. BDPLAs might be a new derivative of PDLLA-based biodegradable materials for medical applications without acidity-caused irritations and acidity-induced auto-accelerating degradation behavior as that of PDLLA.     

Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.     

Improved hydrolytic stability of poly(dl-lactide) with epoxidized soybean oil

The multi-arm star polymer (ESOPLA) was obtained by ring-opening polymerization of dl-lactide using multifunctional epoxidized soybean oil (ESO) as an initiator in the presence of a stannous actuate (SnOct₂) catalyst. Gel permeation chromatography with multi-angle laser light scattering (GPC-MALLS), FTIR, ¹H NMR, thermal analysis and in vitro degradation were used to qualitatively characterize the synthesized polymers. The results revealed that ESO plays an important role in increasing the molecular weight, polymerization rate and monomer conversion rate. Degradation analysis demonstrated that the decrease in molecular weight and the weight loss ratio of the star-shaped ESOPLA were lower than that of linear poly(dl-lactide) (PDLLA). The surface topography of pre- and post-degradation materials was characterized by scanning electron microscopy (SEM). These SEM images showed that the linear PDLLA films underwent water erosion more readily than the star-shaped polymer films.     

Hydrolytic degradation of carbohydrate-based aromatic homo- and co-polyesters analogous to PET and PEI

The hydrolytic degradation of a series of homo- and co-polyesters analogous to poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI), prepared from carbohydrate-based monomers, was studied. The degradation process was carried out at temperatures of approximately 10 °C above the T_g of the polymers. All the studied polyesters were found to degrade at significant rates, and degradability showed a clear dependence on the configuration of the sugar units present in the polymer chain. No weight loss was detected upon degradation, apparently due to the non-solubility of the degraded products in the aqueous incubation medium. Hydrolysis of co-polyesters took place preferentially by cleavage of the ester groups of the sugar units.     

Solution behavior of 4-arm poly(tert-butyl acrylate) star polymers

This paper reports the synthesis of 4-arm poly(tert-butyl acrylate) stars of different molar masses up to 10⁶ g/mol by the “core-first” method using ATRP. All obtained stars have a monomodal and narrow molar-mass distribution (<1.2).The dilute-solution properties of these star polymers were investigated in good solvents (tetrahydrofuran and acetone). Gel permeation chromatography and dynamic and static light scattering were used to measure the hydrodynamic properties including intrinsic viscosity [η], radius of gyration R_g, hydrodynamic radius R_h, second virial coefficient A₂ and diffusion coefficient D₀. These data were used to establish relationships between these parameters and the molar mass of 4-arm poly(tert-butyl acrylate) stars. The branching parameters g and g′ and the shape factor ρ were calculated for all obtained star polymers.     

Modification and chemical transformation of Si(1 1 1) surface

Modification of hydrogen-terminated Si(1 1 1) surfaces by hydrosilylation of activated alkenes and further chemical transformation of the modified surfaces is reported. A Si(1 1 1)-H surface was reacted with activated alkenes such as acrylate esters, acrylonitrile, and maleic anhydride under mild conditions to give modified surfaces with terminal functional groups. A modified surface with a terminal ester group was reduced by LiAlH₄ to give a hydroxy-terminated surface, and the hydroxy-terminated surface was transformed to a bromo-terminated surface. XPS analysis revealed that the brominated surface (Si(1 1 1)-CH₂CH₂CH₂Br) had 32% coverage with the 3-bromopropyl group. Ester and amide formation reactions were carried out on hydroxy- and carboxy-terminated Si surfaces by reaction with tert-butoxycarbonyl glycine, glycine tert-butyl ester, 2,2,2-trifluoroethanol and 4-trifluoromethylbenzyl alcohol in the presence of carbodiimide. XPS characterization indicated that the esters and amide were successfully formed with coverage ranging from 16% to 58%. Coverage ratios of octadecyl ester modified surfaces were also estimated by combination of surface reduction and gas chromatography analysis to be 25-35%.     

Degradation behaviors of electrospun fibrous composites of hydroxyapatite and chemically modified poly(dl-lactide)

It is essential to individually tailor the biodegradability of electrospun fibers and their composites to meet the requirements of specific application. Electrospun poly(dl-lactide) (PDLLA) fibers grafted with functional groups were obtained to induce in situ mineralization of hydroxyapatite (HA), and HA/PDLLA composites were fabricated through hot-pressing of mineralized fibers after layer-by-layer deposition. The degradation behaviors during up to 1 year incubation were clarified for functionalized PDLLA fibers, mineralized HA/PDLLA fibers and hot-pressed composites. The carboxyl and amino groups of electrospun fibers indicated enhancement and alleviation of the autocatalysis effect on the polyester hydrolysis, respectively. The distribution of HA within fiber matrices led quick and strong water absorption, and caused neutralization of the weak acid environment and alleviation of the autocatalysis effect. Due to the location of mineralized HA on the surface of functionalized fibers, significant HA loss and preferential removal of amorphous and low-crystalline apatitic phase were determined during the degradation process. The hot-pressed composites indicated dense structure, small pore size and fusion on the fiber surface, leading significantly lower degradation rate than electrospun fibers and mineralized fibers. Higher degradation rate of matrix polymers and HA loss were shown for hot-pressed composites from mineralized fibers than those from blend electrospun HA/PDLLA fibers. The obtained results should provide solid basis for further applications of functionalized PDLLA fibers, mineralized fibers and fibrous composites in biomedical areas.     

Study of the in vitro degradation of poly(ethyl glyoxylate)

In vitro degradation of poly(ethyl glyoxylate) (PEtG), a functionalised polyacetal, was investigated. First, the thermodynamic polymerization parameters and the ceiling temperature (T_c) were determined (ΔH_p = 28 ± 3 kJ mol⁻¹, ΔS_p = 98 ± 7 J mol⁻¹ K⁻¹, T_c = 310 ± 4 K). Secondly, PEtG hydrolysis was investigated using potentiometry, weight loss measurements, SEC and ¹H NMR. The results show that PEtG is stable for at least 7 days in aqueous media. Then degradation occurs and releases ethanol and glyoxylic acid hydrate as final products. A scheme for the degradation mechanism involving chain scission and ester hydrolysis is proposed.     

Reducing the formation of six-membered ring ester during thermal degradation of biodegradable PHBV to enhance its thermal stability

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has attracted the attention of academia and industry because of its biodegradability, biocompatibility, thermoplasticity and plastic-like properties. However, PHBV is unstable above 160 °C during melt processing at a temperature above the melting temperature, which restricts practical applications as a commodity material. It is widely believed that thermal degradation of PHBV occurs almost exclusively via a random chain scission mechanism involving a six-membered ring transition state. Here, 2,2′-bis(2-oxazoline) (BOX) was selected to modify PHBV to control the formation of six-membered ring ester during thermal degradation. The resulting hydroxyl-terminated PHBVs (HT-PHBVs) had improved thermal stability due to a decrease in the negative inductive effect of the neighboring group of methylene groups at the β-position to the ester oxygen, and a decrease in the electron-denoting effect of substituent group of carbon atoms at α-position to the ester oxygen. The optimal reaction temperature and time were determined to be 95 °C and 6 h, respectively. Compared with those of original PHBV, the temperature determined at 5% weight loss (T_5%), the initial decomposition temperature (T₀), the maximum decomposition temperature (T_max), the complete decomposition temperature (T_f) of HT-PHBV prepared under the optimal conditions increased by 31, 24, 19 and 19.1 °C, respectively.     

Use of UV-visible spectroscopy to monitor nitrocellulose degradation in thin films

Activation energies for nitrocellulose (NC) degradation have been determined from Arrhenius plots constructed using first-order rate constants measured at 40, 50 and 60 °C. The rate constants were obtained by monitoring the absorbance (A) at a wavelength in the visible region of an anthraquinone dye dispersed in NC thin films. The dye acts as a stabilizer and is slowly depleted as a result of its reaction with NO_x from the breakdown of the nitrate ester groups on NC. The data produced two linear regions in the first-order plots of ln(A₀/A_t) vs aging time. The first-region is attributed to the reaction of the dye with NO_x desorbed from the NC surface. The activation energy (∼73.5 kJ mol⁻¹) is in line with that found for NO_x surface desorption processes. The second linear region is thought to be due to the reaction of NO_x from the breakdown of the nitrate ester groups on the NC molecule. The activation energy (∼104.0 kJ mol⁻¹) is consistent with that for nitrate ester hydrolysis. The use of UV-visible spectroscopy has in this way made it possible to monitor the degradation of NC non-destructively without the need for stabilizer extraction and analysis.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Prevailing mechanisms of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans

The predominant mechanism of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans in phosphate buffer was followed by quantifying both released dextran and lactic acid from the copolymers. The studied amphiphilic copolymers, with well-defined structure, exhibited various oligo(d,l-lactide) weight fractions (F^OLA) while having a quite high extent of free hydroxyl groups (>90%). Depending on their F^OLA, oligo(d,l-lactide)-grafted dextrans were soluble either in water or in organic solvents (THF, toluene, …) and different prevailing mechanisms of hydrolytic degradation were observed. The copolymer soluble in THF, with longer oligo(d,l-lactide) grafts and higher F^OLA, was found to degrade via a particular mechanism by which the greatest part of dextran was released into buffer medium during the first two weeks of degradation. During the initial stage of degradation, the hydrophilicity of dextran backbone was considered to be the main driving force for the hydrolytic cleavage of the ester linkage between backbone and grafts. Released oligo(d,l-lactide) grafts were found to be degraded via chain-end degradation or random degradation depending on their solubility in buffer medium. In case of water-soluble copolymers with shorter oligo(d,l-lactide) grafts and lower F^OLA, the chain-end degradation was exclusively observed.     

Synthesis and properties of conducting organic/inorganic polyurethane hybrids

A series of polyurethane/polyaniline/silica organic/inorganic hybrids were synthesized via the conventional polyurethane (PU) prepolymer technique. Amine-endcapped polyaniline (PANI) with low molecular weight and higher solubility was firstly synthesized. This PANI oligomer was then used together with nano-silica bearing silanol groups as chain extenders to prepare the conducting polyurethane hybrids. The polyurethane hybrids were designated as PU-xPANI-ySiO₂ (x + y = 1). For comparison, the urethane-aniline block copolymer and the PU/silica hybrid were designated as PU-PANI and PU-SiO₂, respectively.The structures of PU-PANI, PU-SiO₂ and conducting polyurethane hybrids were confirmed by FT-IR, solid-state ¹³C, and ²⁹Si NMR spectra. In nano-silica containing organic/inorganic conducting polyurethane hybrids, UV-vis spectra revealed the maximum absorption bands similar to that of PU-PANI. X-ray diffraction patterns indicated that these samples are typical of semicrystalline/amorphous materials. SEM image of PU-0.5PANI-0.5SiO₂ showed that PANI was dispersed homogeneously and interconnected continuously in the insulating PU-silica matrix. TGA results of the polymer hybrids exhibited higher thermal stabilities and lower decomposition rates than that of PU-PANI both in nitrogen and air. Differential scanning calorimetry (DSC) studies indicated that the polyurethane hybrids had higher glass-transition temperatures (T_g) with the increase of PANI, but lower than that of PU-PANI. Stress-strain curves for all of the polyurethane hybrids showed the elastomeric behavior of typical polyurethanes. The surface resistivity values of all hybrids were about 10⁸ ∼ 10¹⁰ Ω/sq. and might meet the requirement of the anti-electrostatic materials.     

Preparation of telechelic oligomers by controlled thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene)

It was found that telechelic isotactic oligo(1-butene) and telechelic oligo(propylene-ran-1-butene) could be isolated as nonvolatile oligomers from polymer residues resulting from the thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene), respectively. Their structures were determined by ¹H and ¹³C NMR with attention being paid to their reactive end groups. The maximum average number of terminal vinylidene groups per molecule (f_TVD) was 1.8, indicating that about 80 mol% were α,ω-diene oligomers having two terminal vinylidene groups. This useful new telechelic oligomer had a lower polydispersity than the original polymer, in spite of its lower molecular weight and T_m. The composition of end groups of nonvolatile oligomers obtained by thermal degradation of poly(propylene-ran-1-butene) could be explained by the differences in bond dissociation energy and activation energy of elementary reactions during thermal degradation, based on the monomer composition of the original polymer.     

Bacterial polyesters grafted with poly(ethylene glycol): Behaviour in aqueous media

An easy method for grafting of poly(3-hydroxyoctanoate-co-3-hydroxyundecenoate) (PHOU) was developed. Oxidation of the pendant double bonds of PHOU into carboxyl groups to yield poly(3-hydroxyoctanoate-co-3-hydroxy-9-carboxydecanoate) (PHOD) and the esterification of the carboxyl side groups with poly(ethylene glycol) (PEG) were carried out in a single reaction solution. The grafting yield is dependent on the molar mass of the PEG graft. The maximum carboxyl group conversion (52%) was obtained with PEG M_n = 350 and decreased with increasing molar mass of PEG (19% for PEG M_n = 2000). Yields were determined by ¹H and ¹³C NMR. Short PEG grafts lowered the glass transition temperature (PHOD-g-PEG 350 −57 °C) compared to PHOD (−19 °C) and PHOU (−39 °C). This effect depends on the COOH conversion and PEG chain length. Grafting enhanced the hydrophilic character of the modified polymers making them soluble in polar solvents, such as alcohols and water/acetone mixtures. PHOD-g-PEG films were more stable towards hydrolytic degradation as PHOD films. No obvious modification of films was observed after more than 200 days at pH 7.2 and 37 °C. The molar mass of the grafted polymers decreased only slightly during this period, while PHOD films were hydrolyzed into soluble fragments.     

Chemical degradation of poly(2-aminoethyl methacrylate)

Poly(2-aminoethyl methacrylate) (PAMA) has a pK_a of approximately 7.6 and is chemically stable in acidic or neutral aqueous solution in its protonated form. However, chemical degradation of PAMA is known to occur in alkaline media as its primary amine groups become deprotonated (He L et al. Macromolecules 2007; 40: 4429-38). In the present work, the effect of temperature, pH and polymer concentration on the rate of PAMA degradation in dilute aqueous solution has been examined. ¹H NMR spectroscopy indicates that both elimination of 2-aminoethanol and formation of 2-hydroxyethyl methacrylamide repeat units occur above pH 9; elimination is observed first and occurs to a greater extent. FT-IR studies of aqueous PAMA solutions aged at pH 12 and 50 °C confirm the presence of anionic carboxylate groups, which suggests that such elimination is simply due to ester hydrolysis. A control experiment suggests that methacrylamide formation occurs via internal rearrangement, rather than by amidation of the remaining ester groups by the eliminated 2-aminoethanol.     

In vitro hydrolytic degradation of poly(?-caprolactone) grafted dextran fibers and films

We studied the hydrolytic degradation of poly(?-caprolactone) grafted dextran (PGD) fibers and films (matrices) prepared by electrospinning and solvent evaporation methods, respectively. In vitro degradation and erosion experiments were carried out in phosphate buffered saline (pH 7.4 ± 0.1) at 37 ± 1 °C for 150 days. Changes in molecular weights and morphologies of the PGD matrices were monitored as a function of degradation time. The extent of degradation was measured by physical weight loss, scanning electron microscopic (SEM) observations, Fourier transform-infrared (FT-IR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). During the progress of hydrolysis, GPC chromatograms appeared bi modal for fibers and bi and trimodal for the films. The crystallization temperature (T_c) and heat of fusion were significantly increased in both matrices; this indicated preferential hydrolytic degradation in amorphous regions followed by cleavage-induced crystallization. The biodegradation rates were faster for the films (28%) than fibers (23%). After 150 days of degradation, the pH was steady at 5.8 ± 0.3 for fibers and 6.1 ± 0.3 for films. The faster degradation of the films could be probably due to autocatalysis in the interior of the films and the degraded oligomers are hard to diffuse out into the surrounding solution due to its compact physical geometry. Thus, our preliminary results about the degradation of matrices suggested that PGD nanofibers could be excellent matrices in tissue engineering over the films.     

Synthesis and characterization of a new high-Tg photorefractive material

The synthesis and characterization of a new high-T_g photorefractive polymer, polyphosphazene P2, was described. It was obtained via a post-azo coupling reaction. The resulting material has been characterized by means of ¹H NMR, ³¹P NMR, FT-IR, UV-vis, GPC and DSC. Chromophore contents up to 14 mol% have been realized. The molecular weights of polyphosphazene P2 are 3.3 × 10⁴ (M_n) and 4.3 × 10⁴ (M_w), respectively; and the glass-transition temperature is high (170 °C). Measurements reveal that it possesses relatively large magnitude of photoinduced birefringence (4.2-4.7 × 10⁻³).     

Synthesis and characterization of new aromatic poly(ether imide)s and their gas transport properties

A series of processable fluorinated poly(ether imide)s (PIs) were synthesized by reacting a diamine monomer, 1,4-bis-[{2′-trifluromethyl 4′-(4″-aminophenyl)phenoxy}] benzene (HQA) with six different aromatic dianhydrides e.g., BPADA, 6FDA, ODPA, BPDA, BTDA and PMDA. The polyimides showed reasonably high glass-transition temperature (T_g up to 280 °C) and high thermal stability (T_d,10 up to 558 °C). The membranes of these polymers showed tensile strength up to 107 MPa with elongation at break up to 15%, low water absorption (0.61–1.29%), low dielectric constant (2.10–3.13 at 1 MHz) and high optical transparency (λ_cut-off up to 466 nm). The PI membrane prepared from 6FDA exhibited high permeability and permselectivity for O₂/N₂ (P_O2 = 11.8 and P_O2/P_N2 = 9.44) gas pair which eventually surpassed the present upper boundary limit drawn by L.M. Robeson.