Thermal decomposition of 4,4′-diaminodiphenylsulphone

The thermal decomposition of 4,4′-diaminodiphenylsulphone (DDS) was studied by thermogravimetry, differential scanning calorimetry and thermal volatilisation analysis. Solid residues, high-boiling and gaseous products of degradation were collected at each step of thermal decomposition and analysed by infrared spectroscopy and gas chromatography/mass spectrometry.

On programmed heating at normal pressure, DDS starts to evaporate at 250°C. Thermal decomposition, which probably proceeds through homolytic scission of the S-C bond is simultaneously observed. The resulting sulphonyl radicals provoke polymerisation and cross-linking of the solid residue which undergoes a limited degradation at 350°C with elimination of heteroatoms N and S as volatile moieties. Above 400°C, the residue undergoes a complex charring process leading to an aromatic char typical of carbonised aromatic polymers.     

Thermal degradation of poly(dimethyl-p-silphenylene) and poly(tetramethyl-p-silphenylene-siloxane)

i.r. Spectra of poly(dimethyl-p-silphenylene), poly(tetramethyl-p-silphenylene-siloxane) and their pyrolysis residue were investigated and gas chromatographic analyses of the volatile pyrolysis products were performed. Scission of the polymer chain results in radicals, leading to some volatile products and also to cross-linking. It represents the main thermal degradation reaction in both polymers. A rearrangement of the siloxane bonds, altering the polydispersity and producing a small amount of some cyclic volatile products, may also take place in poly(tetramethyl-p-silphenylene-siloxane).     

Thermal degradation of organophosphorus flame-retardant poly(methyl methacrylate) nanocomposites containing nanoclay and carbon nanotubes

Filler nanoparticles pave the way for the development of novel halogen-free flame-retardant polymers. The aim of this study was to investigate the thermal degradability, and in particular, the thermal degradation mechanism of organophosphorus flame-retardant poly(methyl methacrylate) (PMMA) nanocomposites containing nanoclay (NC) and multi-walled carbon nanotubes (CNT). For this purpose, thermogravimetry and direct pyrolysis mass spectrometry analysis were utilized. The onset of degradation was delayed through increased maximum degradation temperature and suppressed mass loss corresponding to initial degradation stage with carbon nanotubes and nanoclays, respectively. Possibility of reactions of melamine and/or melamine derivatives and interactions between carbonyl groups of PMMA and phosphinic acid leading to thermally more stable products was increased owing to the barrier effect of filler nanoparticles. In the presence of NC better flame retarding characteristics was detected as anhydride formation, leading to charring being more effective.     

Thermal degradation in a trimodal poly(dimethylsiloxane) network studied by (1)H multiple quantum NMR

Thermal degradation of a filled, cross-linked siloxane material synthesized from poly(dimethylsiloxane) chains of three different average molecular weights and with two different cross-linking species has been studied by (1)H multiple quantum (MQ) NMR methods. Multiple domains of polymer chains were detected by MQ NMR exhibiting residual dipolar coupling () values of 200 and 600 Hz, corresponding to chains with high average molecular weight between cross-links and chains with low average molecular weight between cross-links or near the multifunctional cross-linking sites. Characterization of the values and changes in distributions present in the material were studied as a function of time at 250 degrees C and indicate significant time-dependent degradation. For the domains with low , a broadening in the distribution was observed with aging time. For the domain with high , increases in both the mean and the width in were observed with increasing aging time. Isothermal thermal gravimetric analysis reveals a 3% decrease in weight over 20 h of aging at 250 degrees C. Degraded samples also were analyzed by traditional solid-state (1)H NMR techniques, and off-gassing products were identified by solid-phase microextraction followed by gas chromatography-mass spectrometry. The results, which will be discussed here, suggest that thermal degradation proceeds by complex competition between oxidative chain scissioning and postcuring cross-linking that both contribute to embrittlement.     

Gamma irradiation degradation/modification of 5-ethylidene 2-norbornene (ENB)-based ethylene propylene diene rubber (EPDM) depending on ENB content of EPDM and type/content of peroxides used in vulcanization

In this study, the radiation degradation/modification of the vulcanized EPDM and the effects of dose rate, peroxide type/content in vulcanization system and ENB content of EPDM were studied to investigate the change in the extend of the modification/degradation of the mechanical properties of vulcanized EPDM via gamma irradiation. In addition, thermal, dynamic mechanical, ATR-FTIR, TGA, TGA-FTIR tests were carried out to understand the change of properties of vulcanized EPDM via irradiation.Samples were irradiated with two different dose rates of 1280 and 64.6 Gy/h. Total dose of irradiation was up to 184 kGy. The FTIR spectral analysis showed structural changes of EPDM via irradiation. It was observed that the dose rate changed the mechanical properties with different extends. The change of ENB content of EPDM and peroxide type and content in vulcanization system affect extend of the modification/degradation of the EPDM's properties.     

Synthesis and properties of poly(aniline-co-azidoaniline)

Copolymers of polyaniline and o-azidoaniline were synthesized by chemical oxidative polymerization. The copolymers were characterized by powder X-ray diffraction (XRD) and UV/Vis and FT-IR spectroscopy. Thermal activation of the azido chromophore in the copolymer caused it to react and cross-link into adjacent polymer chains. The cross-linking of the copolymers was indicated by the depletion of the azido band in the FT-IR spectrum. The effects of the cross-linking were studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and four-probe conductivity. The TGA showed that the thermal stability of the copolymers is improved due to cross-linking. However, the increased thermal stability is accompanied by a decrease in electrical conductivity due to the loss of conjugation detected by UV/Vis spectroscopy and a loss of crystallinity due to the azido substituents, which was demonstrated by XRD.     

Fire retardancy mechanisms of arylphosphates in polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene

The pyrolysis of polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene (PC/ABS) with and without arylphosphates (triphenylphosphate TPP, resorcinol-bis(diphenyl phosphate) RDP and bisphenol A bis(diphenyl phosphate) BDP) is investigated by thermal analysis as key to understanding the flame retardancy mechanisms and corresponding structure–property relationships. The correspondence between the decomposition temperature range of arylphosphates and PC is pointed out as prerequisite for the occurrence of the reaction between arylphosphate and structures that are typical for the beginning of PC decomposition. Resulting cross-linking enhances charring in the condensed phase and competes with the alternative release of phosphate in the gas phase and thus flame inhibition. Flame inhibition was identified as the main flame retardancy mechanism. The additional condensed phase mechanisms optimise the performance.     

Characterisation of macroporous poly(methyl methacrylate) coated with plasma-polymerised poly(2-hydroxyethyl acrylate)

Macroporous poly(methyl methacrylate) networks with varying cross-linking density and porosity were coated with plasma-polymerised poly(2-hydroxyethyl acrylate) grafted on the pores surface. The result is a mechanically reinforced hydrogel (PMMA-gr-plPHEA) whose properties are characterised in this work using several experimental techniques. Bulk PMMA and bulk PHEA were also characterised as reference materials. The diffusion and water sorption properties of these hydrogels were studied through equilibrium water sorption isotherms and desorption starting with the sample equilibrated in immersion in liquid water or in a vapour atmosphere. Glass transition, dynamic-mechanical relaxation and thermal degradation were characterised in order to study the interphase interaction in these biphasic systems. All these experimental techniques suggested that plasma-polymerised PHEA is more homogeneously interpenetrated with highly cross-linked macroporous PMMA than if the porous substrate is a loosely cross-linked polymer network.     

The thermal degradation of poly(diethyl fumarate)

The kinetics and mechanism of the thermal degradation of poly(diethyl fumarate) (PDEF) were studied by thermogravimetry, as well as by analysis of the thermolysis volatiles and polymer residue. The characteristic mass loss temperatures were determined, as were the overall thermal degradation activation energies of three PDEF samples of varying molar mass. Ethylene and ethanol were present in the thermolysis volatiles at degradation temperatures below 300 °C, while diethyl fumarate was also evidenced at higher degradation temperatures. The amount of monomer increased with increasing degradation temperature. The dependence of the molar mass of the residual polymer on the degradation time and temperature was established and the number of main-chain scissions per monomer unit, s/P₀, calculated. A thermal degradation mechanism including de-esterification and random main-chain scission is proposed. The thermal degradation of PDEF was compared to the thermolysis of poly(ethyl methacrylate) (PEMA), poly(diethyl itaconate) (PDEI) and poly(ethyl acrylate) (PEA).     

Synergistic effect between hydrophobic oxide nanoparticles and ammonium polyphosphate on fire properties of poly(methyl methacrylate) and polystyrene

Synergism on fire properties has been investigated between nano-sized hydrophobic oxides (alumina and silica) and ammonium polyphosphate (AP) flame-retardant additive. Thermal degradation of mixed additives (50% w/w) showed the impact of oxides on AP degradation. The effect of modified nanoparticles was compared with corresponding hydrophilic oxide as regards thermal and fire behaviour. The nanocomposites prepared by melt-blending were evaluated by thermogravimetric analysis and cone calorimetry measurements. Residues were characterized by ATR-FTIR spectroscopy, X-ray diffraction and SEM-EDX experiments. A noteworthy decrease of peak of heat release rate and smoke opacity as well as an increase of LOI were noticed with hydrophobic silica combined with AP both in PMMA and PS. This flame-retardant behaviour was ascribed mainly to the formation of a specific silicon metaphosphate (SiP₂O₇) crystalline phase which contributes to promote charring and an efficient insulating layer.     

Thermal behaviour of lignins extracted from different raw materials

The thermal degradation of lignins extracted from bagasse, rice straw, corn stalk and cotton stalk, have been investigated using the techniques of thermogravimetric analysis (TG) and differential thermal analysis (DTA), between room temperature and 600°C. The actual pyrolysis of all samples starts above 200°C and is slow. The results calculated from TG curves indicated that the activation energy, Efor thermal degradation for different lignins lies in the range 7.949–8.087 kJ mol^?1. The DTA of all studied lignins showed an endothermic tendency around 100°C. In the active pyrolysis temperature range, thermal degradation occurred via two exothermic process at about 320 and 480°C, and a large endothermic pyrolysis region between 375 and 450°C. The first exothermic peak represents the main oxidation and decomposition reaction, the endothermic effect represents completion of the decomposition and the final exothermic peak represents charring.     

Poly(ether ether ketone)/poly(aryl ether sulphone) blends: thermal degradation behaviour

The thermodegradative behaviour of blends of poly(ether ether ketone) (PEEK) and poly(aryl ether sulphone) (PES) was studied by dynamic thermogravimetry in order to analyze their thermal stability. The Freeman-Carrol differential approach was used to determine the kinetic parameters i.e. the apparent activation energy (E_a) and order of reaction (n), of the degradation process. The results indicate that the presence of one component influences the thermal stability of the other. Both, temperature for 5% weight loss (T₅) and E_a for blends show a negative deviation from the linear behaviour, which signifies a lowering of thermal stability compared to homopolymers. The decrease in the thermal stability at low concentration of PES in PEEK has been explained on the basis of chemical interactions of the degradation products of PES, which has lower induction temperature for degradation, with PEEK and also on the reduction of viscosity of the medium. But the decrease in thermal stability at low concentration of PEEK in PES is unusual and at present, without the complete elucidation of degradation mechanism in these blends, is difficult to explain.     

Thermal degradation kinetics of poly(methylvinylsilylene-co-styrene)

Thermal degradation kinetics of poly(methylvinylsilylene-co-styrene) copolymers, viz., PMVSS-I to PMVSS-V obtained by reacting methylvinyldichlorosilane (MVDCS) and styrene in 1:0.25, 1:0.5, 1:1, 1:3 and 1:7 mole ratios under dechlorination conditions, using sodium, was studied by thermogravimetry. The homopolymer, poly(methylvinylsilane) (PMVS), synthesized from MVDCS using sodium was also subjected to the above study for comparative evaluation. The kinetic parameters for thermal degradation, viz., activation energy (E) and pre-exponential factor (A) for the above polymers were estimated by non-isothermal kinetic methods such as Mac Callum-Tanner (M-T), Horowitz-Metzger (H-M), Madhusudhanan-Krishnan-Ninan (MKN) and Coats-Redfern (C-R). The order for thermal degradation of PMVS was found to be almost 0. In the case of the copolymers, the order was 1 for PMVSS-I and 2 for PMVSS-II to PMVSS-V. The observed difference in the order for thermal degradation of PMVSS-I when compared to the other copolymers is attributed to the presence of polysilyl linkages in PMVSS-I. It was found that the activation energy and pre-exponential factor showed an increase in trend with increase in concentration of styrene in the copolymer system.     

Kinetics of thermal degradation and thermal oxidative degradation of poly(p-dioxanone)

The kinetics of the thermal degradation and thermal oxidative degradation of poly(p-dioxanone) (PPDO) were investigated by thermogravimetric analysis. Kissinger method, Friedman method, Flynn-Wall-Ozawa method and Coats-Redfern method have been used to determine the activation energies of PPDO degradation. The results showed that the thermal stability of PPDO in pure nitrogen is higher than that in air atmosphere. The analyses of the solid-state processes mechanism of PPDO by Coats-Redfern method and Criado et al. method showed: the thermal degradation process of PPDO goes to a mechanism involving random nucleation with one nucleus on the individual particle (F₁ mechanism); otherwise, the thermal oxidative degradation process of PPDO is corresponding to a nucleation and growth mechanism (A₂ mechanism).     

Thermal degradation of γ-irradiated poly(vinyl chloride)

The thermal degradation of unstabilized poly(vinyl chloride) irradiated with γ-rays has been investigated by dynamic thermogravimetry in a nitrogen atmosphere. The overall effect of irradiation is to render PVC more susceptible to thermal degradation. The change in activation energy of degradation with dose showed a behavior parallel with the change of intrinsic viscosity with dose. The minimum and maximum E_a values were found to correspond with the minimum and maximum observed on [η] versus dose curves. This behavior indicates an inverse relationship between the rate of thermal degradation and molecular size.     

Thermal properties and degradability of poly(propylene carbonate)/poly(β-hydroxybutyrate-co-β-hydroxyvalerate) (PPC/PHBV) blends

Poly(propylene carbonate)/poly(β-hydroxybutyrate-co-β-hydroxyvalerate) (PPC/PHBV) blends were prepared via the solution casting method at different proportions. Their thermal characteristics were studied by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The degradability of the blends was investigated in soil suspension cultivation and in vitro degradation testing. The changes of structure and molecular weight for blends were also studied by ¹H nuclear magnetic resonance spectroscopy (¹H NMR), scanning electron microscopy (SEM) and gel permeation chromatography (GPC) before and after degradation. Although the PPC/PHBV blends were immiscible, the addition of PHBV could improve the thermal stability of PPC. PHBV was degraded mainly by the action of microbial enzymes in the soil suspension, which biodegraded it more rapidly than PPC in a natural environment. PPC was degraded mainly by chemical hydrolysis and random hydrolytic scission of chains in the PBS solution in vitro, and degradation of PPC was more rapid than that of PHBV in a simulated physiological environment.     

Investigation of the thermal degradation of fully aromatic regular polyesters: Poly(oxy-1,4-phenyleneoxy-fumaroyl-bis-4-oxybenzoate)

The thermal behaviour and degradation mechanism of fully aromatic polyester, poly(oxy-1,4-phenyleneoxy-fumaroyl-bis-4-oxybenzoate), were studied by pyrolysis-gas chromatography and pyrolysis-gas chromatography/mass spectrometry at 500-700 °C, and by thermogravimetry. The influence of fullerene C₆₀ additives on thermal behaviour and thermal degradation was investigated. On the basis of pyrolysis products determined, the origin of the main degradation products (maleic anhydride, phenol, hydroquinone, phenyl ether, p-hydroxybenzoate-p′-phenol, etc.) was estimated. The fullerene is a well-known efficient acceptor of radicals and its presence influences the thermal degradation process of polymers shifting the decomposition from a radical pathway to a non-radical mechanism. Thermal degradation mechanism of poly(oxy-1,4-phenyleneoxy-fumaroyl-bis-4-oxybenzoate) is discussed in detail.     

Thermal degradation of poly(p-phenylene-graft-?-caprolactone) copolymer

The thermal degradation of poly(p-phenylene-graft-?-caprolactone) (PPP), synthesized by Suzuki polycondensation of poly(?-caprolactone) (PCL) with a central 2,5-dibromo-1,4-benzene on the chain with 1,4-phenylene-diboronic acid, has been studied via direct pyrolysis mass spectrometry. The thermal degradation occurred mainly in two steps. In the first step, decomposition of PCL chains occurred. A slight increase in thermal stability of PCL chains was noted. In the second stage of pyrolysis, the decomposition of the polyphenylene backbone takes place. The evolution of CL monomer or small CL segments left on the phenyl ring continued also in the temperature region where degradation of PPP backbone started.     

Preparation of telechelic oligomers by controlled thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene)

It was found that telechelic isotactic oligo(1-butene) and telechelic oligo(propylene-ran-1-butene) could be isolated as nonvolatile oligomers from polymer residues resulting from the thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene), respectively. Their structures were determined by ¹H and ¹³C NMR with attention being paid to their reactive end groups. The maximum average number of terminal vinylidene groups per molecule (f_TVD) was 1.8, indicating that about 80 mol% were α,ω-diene oligomers having two terminal vinylidene groups. This useful new telechelic oligomer had a lower polydispersity than the original polymer, in spite of its lower molecular weight and T_m. The composition of end groups of nonvolatile oligomers obtained by thermal degradation of poly(propylene-ran-1-butene) could be explained by the differences in bond dissociation energy and activation energy of elementary reactions during thermal degradation, based on the monomer composition of the original polymer.