Large molecules in high-intensity laser fields

New research fields have opened up that are related to the interactions between molecules and high-intensity optical fields where the laser intensity ranges from 10¹²–10¹⁷ W cm⁻². A broad outline of this area will be described from the perspective of products and new techniques for beam generation. Studies of large molecules have begun and some examples are introduced herein. Parent ions with little fragmentation are found to form in the intensity region below 10¹⁶ W cm⁻². The formation of intact ions can be used in femtosecond laser mass spectrometry. In the intensity region above 10¹⁶ W cm⁻², electrons are stripped from the molecules by optical field ionization and the highly charged ions can undergo a Coulomb explosion. Coulomb explosions of benzene and C₆₀ have been demonstrated, and the mechanism can be analyzed by means of molecular dynamics simulations. A high intensity femtosecond laser beam can be converted to radiation sources of coherent VUV light, X-rays etc. and some possibilities for new chemical applications will be discussed.     

Reactions in clusters of acetone and fluorinated acetones triggered by low energy electrons

Electron attachment to clusters of acetone (A), trifluoroacetone (TFA) and hexafluoroacetone (HFA) is studied in a crossed beam experiment with mass spectrometric detection of the anionic products. We find that the electron attachment properties in A change dramatically on going from isolated molecules to clusters. While single acetone is a very weak electron scavenger (via a dissociative electron attachment (DEA) resonance near 8.5 eV), clusters of A capture electrons at very low energy (close to 0 eV). The final ionic products consist of an ensemble of molecules (M) subjected to the loss of two neutral H₂ molecules ((M_n−2H₂)⁻, n ≥ 2). Their formation at low energies can only be explained by invoking new cyclic structures and polymers. In clusters of TFA, anionic complexes containing non-decomposed molecules (M_n⁻) including the monomer (M⁻) and ionic products formed by the loss of one and two HF molecules are observed. Loss of HF units is also interpreted by the formation of new cyclic structures in the anionic system. HFA is a comparatively stronger electron scavenger forming a non-decomposed anion via a narrow resonant feature near 0 eV in the gas phase. In HFA clusters, the non-decomposed parent anion is additionally observed at higher electron energies in the range 3–9 eV. The M⁻ signal carries signatures of self-scavenging processes, i.e., inelastic scattering by one molecule and capture of the completely slowed down electron by a second molecule within the same cluster. The scavenging spectrum is hence an image of the electronically excited states of the neutral molecule.     

Selective determination of total vanadium in water samples by cloud point extraction of its ternary complex

A highly sensitive micelle-mediated extraction methodology for the preconcentration of trace levels of vanadium as a prior step to its determination by flame atomic absorption spectrometry (FAAS) has been developed. Vanadium was complexed with 1-(2-pyridylazo)-2-naphthol (PAN) and hydrogen peroxide in acidic medium (0.2 mol L⁻¹ phosphoric acid) using Triton X-100 as surfactant and quantitatively extracted into a small volume of the surfactant-rich phase after centrifugation. The color reaction of vanadium ions with hydrogen peroxide and PAN in phosphoric acid medium is highly selective. The chemical variables affecting cloud point extraction (CPE) were evaluated and optimized. The R.S.D. for 5 replicate determinations at the 20 μg L⁻¹ V level was 3.6%. The calibration graph using the preconcentration system for vanadium was linear with a correlation coefficient of 0.99 at levels near the detection limits up to at least 0.6 μg L⁻¹. The method has good sensitivity and selectivity and was applied to the determination of trace amounts of vanadium in water samples with satisfactory result. The proposed method is a rare application of CPE-atomic spectrometry to vanadium assay, and is superior to most other similar methods, because its useful pH range is in the moderately acidic range achieved with phosphoric acid. At this pH, many potential interferents are not chelated with PAN, and iron(III) as the major interferent is bound in a stable phosphate complex.     

Automated Method for the Selective Determination of Gold by On-Line Solvent Extraction and Reversed Micellar-Mediated Luminol Chemiluminescence Detection

A new method based on the direct coupling of on-line solvent extraction with chemiluminescence (CL) of luminol in reverse micelles is proposed for the determination of gold(III) in a reverse-flow injection system. In the on-line process, gold(III) is extracted from aqueous hydrochloric acid solution with tri-n-octylphosphine oxide in chloroform, followed by separation through a microporous Teflon membrane. A reversed micellar system of cetyltrimethylammonium chloride-water (buffered with sodium carbonate)-6:5 (v/v) chloroform-cyclohexane was used as a medium for the CL reaction. Linear calibration for gold was established over the concentration range 10-5000 ng ml⁻¹ and the detection limit was 1 ng ml⁻¹. Much higher tolerable levels of potential interfering metal ions were achieved for the present on-line procedure. The present method was applied to the analysis of industrial samples of silver-based alloy.     

High preconcentration of ultra-trace metal ions by liquid–liquid extraction using water/oil/water emulsions as liquid surfactant membranes

A high preconcentration method by liquid–liquid extraction using liquid surfactant membranes was developed. The water-in-oil (w/o) emulsion containing dilute hydrochloric acid, 2-ethylhexyl hydrogen 2-ethylhexylphosphonate (PC-88A), liquid paraffin, and kerosene was used for the extraction. In a resulting volume of 1000 cm³ of an aqueous sample solution (pH 5.0) containing less than 1 mg of each metal ion, 2 cm³ of w/o emulsion droplets coated with sorbitan monooleate were dispersed. The analyte metal ions in the outer bulk aqueous phase were extracted into the organic phase to form a complex with PC-88A and successively back-extracted into the inner aqueous phase. The analytes in the resulting inner aqueous phase were determined subsequently by graphite furnace atomic absorption spectrometry applied as a detector. By this procedure, concentration factors of 570, 820, 750, 970, 860, and 880 were achieved for chromium(III), manganese(II), cobalt(II), nickel(II), copper(II), and cadmium(II), respectively, and also the respective detection limits (3σ) of 0.4, 20, 1.2, 18, 18, and 0.7 pg cm⁻³ were obtained.     

The measurement of high proton affinities for a variety of metallic compounds: a new approach by flame-ion mass spectrometry

A small amount (≤ 10⁻⁶ mol fraction) of four alkaline earth metals, tin and yttrium were introduced into five, premixed, fuel-rich, H₂–O₂–N₂ flames at atmospheric pressure in the temperature range 1820–2400 K. Aqueous salt solutions of the metals were sprayed into the premixed flame gas as an aerosol using an atomizer technique. Ions in a flame were observed by sampling flame gas through a nozzle into a mass spectrometer. The concentrations of the major neutral metallic species present in the flame were calculated from thermodynamic data currently available. The principal metallic ions observed were AOH⁺ (A = Mg, Ca, Sr, Ba, Sn) and A(OH)₂⁺ (A = Y), formed initially by proton transfer to AO and OAOH from H₃O⁺, a natural flame ion. Except for Mg, the ions were also produced by chemi-ionization processes. By adjusting the concentration(s) of the salt solution in the atomizer, it was found that a pair of ions could be brought into equilibrium within the time scale of the flame; the pairs included H₃O⁺ with a metal ion or two metallic ions. Because water is a major product of combustion, a very large difference in proton affinity PA⁰(AO) − PA⁰(H₂O) ≤ 490 kJ mol⁻¹ (117 kcal mol⁻¹) could be attempted for the proton transfer equilibrium. Using PA⁰(H₂O) = 691.0 kJ mol⁻¹ (165.2 kcal mol⁻¹) as a reference base to anchor the proton affinity scale, ion ratio measurements led to proton affinity PA⁰ values of 766, 912, 1004, 1184, 1201, and 1222 kJ mol⁻¹ (183, 218, 240, 283, 287, and 292 kcal mol⁻¹) corrected to 298 K for OYOH, SnO, MgO, CaO, SrO, and BaO, respectively; of these, only the value for OYOH has not been reported previously. If it is assumed that the neutral thermodynamic data are correct (although some appear to be in error), the uncertainties in the PA results reported here are ± 21 kJ mol⁻¹ (5 kcal mol⁻¹). The realization that these equilibria can be achieved in flames provides a new approach to consolidate and build the high end of the proton affinity ladder, primarily of metallic species which are not accessible at lower temperatures.     

Selective Preconcentration of U(VI) and Th(IV) in Trace and Macroscopic Levels Using Malonamide Grafted Polymer from Acidic Matrices

A novel polymeric sorbent for selective extraction of U(VI) and Th(IV) from highly acidic wastes was prepared by modifying Merrifield chloromethylated resin with N,N,N′,N′-tetrahexylmalonamide. The functionalized resin was characterized by FT-IR spectroscopy, CPMAS NMR spectroscopy, CHN elemental analysis and thermo-gravimetric analysis. Various physiochemical parameters responsible for quantitative extraction of metal ions were studied by static and dynamic methods. The resin exhibited very good extractability over a wide range of acidity (0.01–10 M) with a faster exchange rate (saturation possible within 20 min) and high sorption capacities (0.645 and 0.558 mmol g⁻¹) for U(VI) and Th(IV), respectively. Quantitative metal desorption was achieved by using 0.5 M (NH₄)₂CO₃ for both analytes. The significant feature of the resin is the possibility of sequential separation and the ability to elute only U(VI) with water, thus offering the possibility of sequential separation of U(VI) and Th(IV). Interference studies with commonly encountered metal ions, rare earth ions and electrolytes were conducted. Enrichment factors of 400 and 350 with a limit of quantification of 20 ng mL⁻¹ and 50 ng mL⁻¹ were achieved for the two analytes. All the analytical data were within 3.8% RSD, reflecting the reproducibility and reliability of the method.     

Cluster-assisted decomposition reactions of the molecular anions of SF6 and C7F14

The cluster ions formed by the attachment of dimethylsulfoxide (DMSO) and methanol to the molecular negative ions of C₇F₁₄ and SF₆ have been studied by a pulsed e-beam high pressure mass spectrometer (PHPMS) and by an atmospheric pressure ionization mass spectrometer (APIMS). The free energy change (ΔG°) for the clustering equilibria reaction, M⁻ + S M⁻S, at 35 °C are found to be −7.7 and −7.s kcal/mol for S = DMSO and M⁻ = C₇F⁻₁₄ and SF⁻₆, respectively, and −6.4 and −4.5 kcal/mol for S = methanol and M⁻ = C₇F⁻₁₄ and SF⁻₆, respectively. While the cluster ions formed by DMSO are found to be stable against side reactions, those formed by methanol undergo decomposition processes in which the central core ion is fragmented. At 35 °C, the rate law for the decomposition of the SF⁻₆ (CH₃OH)₁ ion is second-order, involving the M⁻ (CH₃OH)₁ cluster ion and another methanol molecule. While the C₇F⁻₁₄(CH₃OH)₁ ion also decomposes through this second-order process, a competing unimolecular mechanism is also operative at 35 °C. With increases in the PHPMS ion source temperature to 150 °C, the unimolecular decomposition process becomes progressively dominant for both of the M⁻(CH₃OH)₁ cluster ions of C₇F₁₄ and SF₆. Methanol cluster ions of the type M⁻S₂ are not observed under any of the conditions examined here. When methanol or water partial pressures of a few torr or higher are present in the buffer gas of the APIMS ion source, the decomposition reactions are very fast and only the fragment ions produced by these reactions are observed in the electron-capture (EC)-APIMS spectra of C₇F₁₄ and SF₆. Also, in the methanol-containing APIMS ion source, the course of the SF⁻₆ decomposition reaction is altered so that fragment ions of the type F⁻(S)_n dominate the EC-APIMS spectrum of SF₆ at all ion source temperatures. For C₇F₁₄, fragment ions of the type F⁻(S)_n become dominant at lower ion source temperatures. These previously unknown reactions are expected to be important in the analysis of perfluorinated compounds by mass spectrometric methods that utilize ionization by electron capture or negative chemical ionization. The nature of the fragment ions produced in these cluster-assisted reactions may also provide a new source of information concerning the structures of the molecular negative ions of SF₆ and C₇F₁₄.     

Potentiometric multi-syringe flow injection system for determination of exchangeable potassium in soils with in-line extraction

A multi-syringe flow injection system for the potentiometric determination of exchangeable potassium in soil samples is proposed. Firstly, a manifold was devised to allow determination in soil extracts prepared off-line. It was possible to analyze samples prepared in extractants with different composition (Mehlich or Morgan) without physical or chemical modification of the manifold. A linear dynamic concentration range of 6–391 mg L^− 1 was obtained, allowing the direct introduction of soil extract without dilution. A determination frequency of 50 h^− 1 was achieved, with good repeatability for 10 consecutive injections of soil extracts (RSD < 3.0%). The in-line preparation of soil extract was implemented by automatic addition of extractant solution to a previously weighed portion of soil, followed by in-line filtration. Good repeatability was attained as the variance of the extraction procedure was not significantly different from the variance obtained in consecutive measurements of the same extract. Furthermore, results comparable to those obtained by off-line extraction and determination by flame emission spectrometry were attained for the two soil samples tested. Using this procedure, a determination frequency of 13 h^− 1 and a sampling rate of 4 h^− 1 were achieved.     

Application ofo-Hydroxyphenylfluorone as a Fluorogenic Indicator to the Determination of Hydrogen Peroxide and Oxidase Substrates Based on the Catalytic Effect of Hemin

A highly sensitive fluorescence quenching method has been developed for selective determination of hydrogen peroxide based on the catalytic effect of hemin on theo-hydroxyphenylfluorone (a new fluorogenic substrate) and hydrogen peroxide system. Under optimum conditions, the calibration graph was linear over the range 0–1.0 × 10⁻⁶mol/liter hydrogen peroxide, with a limit of detection of 8.0 × 10⁻⁹mol/liter in a 10-min reaction period. It can easily be incorporated into the determination of biochemical substances that produce hydrogen peroxide under catalytic oxidation by their oxidase. This possibility has been tested for the determination of glucose in human sera as an example.     

Homogeneous liquid-liquid extraction combined with gas chromatography-electron capture detector for the determination of three pesticide residues in soils

In this study, a new method was developed for analyzing malathion, cypermethrin and lambda-cyhalothrin from soil samples by using homogeneous liquid–liquid extraction (HLLE) and gas chromatography with electron capture detector (GC–ECD). Acetone was used as extraction solvent for the extraction of target pesticides from soil samples. When the extraction process was finished, the target analytes in the extraction solvent were rapidly transferred from the acetone extract to carbon tetrachloride, using HLLE. Under the optimum conditions, linearity was obtained in the range of 0.05–40 μg kg⁻¹ for malathion, 0.04–10 μg kg⁻¹ for lambda-cyhalothrin and 0.05–50 μg kg⁻¹ for cypermethrin, respectively. Coefficients of correlation (r²) ranged from 0.9993 to 0.9998. The repeatability was carried out by spiking soil samples at concentration levels of 2.5 μg kg⁻¹ for lambda-cyhalothrin, and 10 μg kg⁻¹ for malathion and cypermethrin, respectively. The relative standard deviations (RSDs) varied between 2.3 and 9.6% (n = 3). The limits of detection (LODs), based on signal-to-noise ratio (S/N) of 3, varied between 0.01 and 0.04 μg kg⁻¹. The relative recoveries of three pesticides from soil A1, A2 and A3 at spiking levels of 2.5, 5 and 10 μg kg⁻¹ were in the range of 82.20–91.60%, 88.90–110.5% and 77.10–98.50%, respectively. In conclusion, the proposed method can be successfully applied for the determination of target pesticide residues in real soil samples.     

Alkyl Ammonium Ion Selectivity of Hexahomotrioxacalix[3]arene Triamide Derivative having the Intramolecular Hydrogen-Bonding Group

The lower rim functionalized hexahomotrioxacalix[3]arene triamide 4 with cone-conformation was synthesized from triol 1 by a stepwise reaction. The different extractability for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane is discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups in triamide 4, its affinity to metal cations was weakened. Triamide 4 shows a single selectivity to n-BuNH₃⁺. The anion complexation of triamide 4 was also studied by ¹H NMR titration experiments. Triamide 4 binds halides through the intermolecular hydrogen bonding among the NH hydrogens of amide in a 1:1 fashion in CDCl₃. The association constants calculated from these changes in chemical shifts of the amide protons are K_a = 223 M⁻¹ for Cl⁻ and K_a = 71.7 M⁻¹ for Br⁻. Triamide 4 shows a preference for Cl⁻ complexation than Br⁻ complexation.     

Nanostructured platinum as an electrocatalyst for the electrooxidation of formic acid

Nanostructured platinum prepared by the chemical reduction of hexachloroplatinic acid dissolved in aqueous domains of the liquid crystalline phases of oligoethylene oxide surfactants, was examined as an electrocatalyst for the electrooxidation of formic acid. The electrocatalytic properties of the catalyst combining highly specific surface areas and a periodic mesoporous nanostructure were accessed in sulfuric acid solution containing 0.5 mol dm⁻³ formic acid using cyclic voltammetry (CV) and chronoamperometry. The electrocatalytic activity of the material at 60 °C, is characterised by a mass activity of 8.6 A g⁻¹ and a specific surface area activity of 26 μA cm⁻² at 0.376 V (vs. RHE). The resistance to CO poisoning was found to depend upon electrode potential. At hydrogen adsorption potentials, the material is easily poisoned, while the material shows high resistance to CO poisoning at potentials positive of the hydrogen region. These facts suggest that the decomposition of HCOOH on the mesoporous platinum is likely to proceed through a dual-path mechanism and the high surface area material is a potential electocatalyst towards the electrooxidation of small organic molecules.     

Catalytic microdetermination of iron

A reaction rate method is described for the microdetermination of iron. The method is based on the catalytic action of iron on the reaction of 2,4-diaminophenol with hydrogen peroxide. The effect of reagent concentration is studied and the maximum tolerable amounts of interfering ions are determined. Procedures for the determination of 2.8 × 10⁻³ to 2.8 × 10⁻² μg/ml are given.Quantities of 2.8 × 10⁻³ to 2.8 × 10⁻² μg/ml could be determinated with a relative error of about 2%.     

The chemistry of adsorbed Cu(II) and Mn(II) in aqueous titanium dioxide suspensions

We studied the adsorption behavior of Cu(II) and Mn(II) on the surface of titanium dioxide over the pH range from 2.0 to 11.5. The titanium dioxide we used in these experiments was prepared by hydrolyzing TiCl₄ and had a surface area of 113.7 m² g⁻¹. All suspensions, which were 9.04 × 10⁻³ M in NaClO₄, contained 20 m² liter⁻¹ of oxide surface and divalent metal ion concentrations sufficient (at full adsorption from solution) to cover the available surface with one-half, one, and four layers of close-packed, hydrated ions. Both divalent ions began adsorption below titanium dioxide's isoelectric point (pH = 6.2). Cu²⁺ adsorption was accompanied by net OH⁻ uptake from solution and it was inferred that the titania surface also provided OH⁻ for Cu²⁺ adsorption. ESR spectra demonstrate the coexistence of two distinct forms adopted by these metal ions on the surface. A portion of the adsorbed metal ions occupies sites magnetically isolated one from another, as evidenced by the paramagnetic behavior of this form. The majority of the metal ions, however, exist in hydrous-metal-ion clusters in which spin-exchange coupling of the electron dipoles determines the magnetic behavior. Electrophoretic mobility measurements indicate that ions adsorbed at isolated sites exert a stronger influence on the electrophoretically measured charge of the suspension particles than ions in clusters. Even though these experiments were performed in the absence of oxygen, we observed the oxidation of a limited amount of the Mn(II) on the surface as low as pH = 5. Presumably this occurs as a result of electron transfer between photo-induced electron holes and Mn(II) on the surface.     

Stratospheric chemical ionization mass spectrometry: nitric acid detection by different ion molecule reaction schemes

Detailed height profiles of stratospheric nitric acid mixing ratios have been derived with a baloon borne chemical ionization mass spectrometer by applying several ion molecule reaction schemes, each associated to a specific and selective ion source. These ions (CO₃⁻, Cl_n⁻, CF₃O⁻, and CF₃O⁻H₂O) give rise to specific product ions (mainly CO₃⁻HNO₃, NO₃⁻HCl, NO₃⁻HF, and CF₃O⁻HNO₃) upon reaction with ambient nitric acid molecules. This paper reports on the instrumental details as well as on the results obtained during two balloon flights with the instrument. Within the accuracy of the measurements, the nitric acid height profiles obtained with the three different ion sources are in good agreement with one another as well as with literature data.     

Extractive spectrophotometric determination of molybdenum(V) in molybdenum steels

An extraction spectrophotometric method has been developed for the determination of traces of molybdenum present in molybdenum steels which is based on the extraction of the orange-red molybdenum-thiocyanate-acetonethiosemicarbazone complex into chloroform from hydrochloric acid medium. The complex has an absorption maximum at 472 nm with a molar absorptivity of 1.9 × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is valid over the concentration range 0.1–9.5 ppm of molybdenum with an optimum concentration range of 0.4–9 ppm. The equilibrium shift method indicates 1:4:2 composition for molybdenumthiocyanate-acetonethiosemicarbazone complex. The effect of acidity, reagent concentrations, temperature, and interferences from various ions are reported.     

A new generation of cyanide ion-selective membranes for flow injection application: Part III. A simple approach to the determination of toxic metal-cyanide complexes without preliminary separation

A new flow injection approach to total weak acid-dissociable (WAD) metal–cyanide complexes is proposed, which eliminates the need of a separation step (such as gas diffusion or pervaporation) prior to the detection. The cornerstone of the new methodology is based on the highly selective flow-injection potentiometric detection (FIPD) system that makes use of thin-layer electroplated silver chalcogenide ion-selective membranes of non-trivial composition and surface morphology: Ag_2 + δSe_1 − xTe_x and Ag_2 + δSe. An inherent feature of the FIP-detectors is their specific response to the sum of simple CN⁻ + Zn(CN)₄²⁻ + Cd(CN)₄²⁻. For total WAD cyanide determination, ligand exchange (LE) and a newly developed electrochemical pre-treatment procedure for release of the bound cyanide were used. The LE pre-treatment ensures complete recovery only when the sample does not contain Hg(CN)₄²⁻. This limitation is overcome by implementing electrochemical pre-treatment which liberates completely the bound WAD cyanide through cathodic reduction of the complexed metal ions. A complete recovery of toxic WAD cyanide is achieved in the concentration range from 156 μg L⁻¹ up to 13 mg L⁻¹. A three-step protocol for individual and group WAD cyanide speciation is proposed for the first time. The speciation protocol comprises three successive measurements: (i) of non-treated, (ii) LE-exchange pre-treated; (iii) electrochemically pre-treated sample. In the presence of all WAD complexes this procedure provides complete recovery of the total bound cyanide along with its quantitative differentiation into the following groups: (1) Hg(CN)₄²⁻; (2) CN⁻ + Cd(CN)₄²⁻ + Zn(CN)₄²⁻; (3) Cu(CN)₄³⁻ + Ni(CN)₄²⁻ + Ag(CN)₂⁻. The presence of a 100-fold excess in total of the following ions: CO₃²⁻, SCN⁻, NH₄⁺, SO₄²⁻ and Cl⁻ does not interferes. Thus the proposed approach offers a step ahead to meeting the ever increasing demand for cyanide-species-specific methods. The equipment simplicity makes the procedure a good candidate for implementing in portable devices for in-field cyanide monitoring.     

CO electrooxidation on a polycrystalline Pt electrode: A wall-jet EQCN study

Pre-adsorbed and bulk (continuous) CO oxidation on a polycrystalline Pt electrode were examined in a wall-jet electrochemical quartz crystal nanobalance (EQCN) setup, using both differential and integral evaluation of the EQCN data, to get further insights into the kinetics and mechanism of this important fuel-cell related electrocatalytic reaction. The hydrogen underpotential adsorption–desorption features in the base cyclic voltammogram of a Pt film are accompanied by significant changes in the electrode mass due H-upd induced desorption–adsorption of anion. In the double-layer region small capacitive currents are accompanied by comparatively large reversible mass changes indicating anion adsorption/desorption (96.5 g mol⁻¹ assigned to bisulfate). OH and oxygen electrosorption from water at potentials more positive of 1.0 V result in relatively small variations in the electrode mass (16 g mol⁻¹ for PtOH and ca. 9 g mol⁻¹ for PtO formation, respectively). The CO-adlayer stripping first leads to the electrode mass decrease in the “pre-peak” region, followed by a fast mass increase within the main stripping peak due to re-adsorption of bisulfate anion (91 g mol⁻¹). A mass-transport limited current for bulk CO oxidation under continuous flow of CO-saturated electrolyte leads to negligible mass changes (0–1 g mol⁻¹) in the PtO region, suggesting that bulk CO oxidation is mediated by electroformed PtO.     

IR-analysis of H-bonded H2O on the pure TiO2 surface

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.