The effect of hydrogen bonding interactions between 2-[4-(dimethylamino)phenyl]-3-hydroxy-4H-chromene-4-one in the ground and excited states and dimethylsulfoxide or methanol on electronic absorption and emission transitions

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.     

Redox features of β-VOPO4 catalyst using tracer and laser Raman spectroscopy

The oxygen ions of the β-VOPO₄ catalyst were exchanged with an tracer by a reduction–oxidation method and by a catalytic oxidation of but-1-ene using ₂. The bands at 992 and 900 cm⁻¹ were more shifted to lower frequencies than those at 1076 and 1002 cm⁻¹. Applying the correlation between the Raman bands and stretching vibrations in the literature, the exchanged oxygen species were estimated. The results suggest that the P–O–V vacancies corresponding to 992 and 900 cm⁻¹ were responsible for reoxidation and the V=O oxygen corresponding to the 1002 cm⁻¹ band of β-VOPO₄ was not. The (VO)₂P₂O₇ was oxidized to β-VOPO₄ by O₂ above 823 K. The insertion position of oxygen was determined at the bands at 992 and 900 cm⁻¹ of β-VOPO₄ using ₂, which is the same as the exchanged position.     

Spectroscopic properties of guanidinium zinc sulphate [C(NH2)3]2Zn(SO4)2 and ab initio calculations of [C(NH2)3]2 and HC(NH2)3

Raman and FTIR spectra of guanidinium zinc sulphate [C(NH₂)₃]₂Zn(SO₄)₂ are recorded and the spectral bands assignment is carried out in terms of the fundamental modes of vibration of the guanidinium cations and sulphate anions. The analysis of the spectrum reveals distorted SO₄²⁻ tetrahedra with distinct S–O bonds. The distortion of the sulphate tetrahedra is attributed to Zn–O–S–O–Zn bridging in the structure as well as hydrogen bonding. The CN₃ group is planar which is expressed in the twofold symmetry along the C–N (1) vector. Spectral studies also reveal the presence of hydrogen bonds in the sample. The vibrational frequencies of [C(NH₂)₃]₂ and HC(NH₂)₃ are computed using Gaussian 03 with HF/6-31G* as basis set.     

Vibrational spectroscopic study of the antimonate mineral bindheimite Pb2Sb2O6(O,OH)

Raman spectroscopy complimented with infrared spectroscopy has been used to characterise the antimonate mineral bindheimite Pb₂Sb₂O₆(O,OH). The mineral is characterised by an intense Raman band at 656 cm⁻¹ assigned to SbO stretching vibrations. Other lower intensity bands at 664, 749 and 814 cm⁻¹ are also assigned to stretching vibrations. This observation suggests the non-equivalence of SbO units in the structure. Low intensity Raman bands at 293, 312 and 328 cm⁻¹ are assigned to the OSbO bending vibrations. Infrared bands at 979, 1008, 1037 and 1058 cm⁻¹ may be assigned to δOH deformation modes of SbOH units. Infrared bands at 1603 and 1640 cm⁻¹ are assigned to water bending vibrations, suggesting that water is involved in the bindheimite structure. Broad infrared bands centred upon 3250 cm⁻¹ supports this concept. Thus the true formula of bindheimite is questioned and probably should be written as Pb₂Sb₂O₆(O,OH,H₂O).     

Vibrational spectroscopic study of the arsenate mineral strashimirite Cu8(AsO4)4(OH)4·5H2O—Relationship to other basic copper arsenates

The basic copper arsenate mineral strashimirite Cu₈(AsO₄)₄(OH)₄·5H₂O from two different localities has been studied by Raman spectroscopy and complemented by infrared spectroscopy. Two strashimirite mineral samples were obtained from the Czech (sample A) and Slovak (sample B) Republics. Two Raman bands for sample A are identified at 839 and 856 cm⁻¹ and for sample B at 843 and 891 cm⁻¹ are assigned to the ν₁ (AsO₄³⁻) symmetric and the ν₃ (AsO₄³⁻) antisymmetric stretching modes, respectively. The broad band for sample A centred upon 500 cm⁻¹, resolved into component bands at 467, 497, 526 and 554 cm⁻¹ and for sample B at 507 and 560 cm⁻¹ include bands which are attributable to the ν₄ (AsO₄³⁻) bending mode. In the Raman spectra, two bands (sample A) at 337 and 393 cm⁻¹ and at 343 and 374 cm⁻¹ for sample B are attributed to the ν₂ (AsO₄³⁻) bending mode. The Raman spectrum of strashimirite sample A shows three resolved bands at 3450, 3488 and 3585 cm⁻¹. The first two bands are attributed to water stretching vibrations whereas the band at 3585 cm⁻¹ to OH stretching vibrations of the hydroxyl units. Two bands (3497 and 3444 cm⁻¹) are observed in the Raman spectrum of B. A comparison is made of the Raman spectrum of strashimirite with the Raman spectra of other selected basic copper arsenates including olivenite, cornwallite, cornubite and clinoclase.     

Pulsed laser-induced oxygen deficiency at TiO2 surface: Anomalous structure and electrical transport properties

We have studied pulsed laser-induced oxygen deficiencies at rutile TiO₂ surfaces. The crystal surface was successfully reduced by excimer laser irradiation, and an oxygen-deficient TiO_2−δ layer with 160 nm thickness was formed by means of ArF laser irradiation at 140 mJ/cm² for 2000 pulses. The TiO_2−δ layer fundamentally maintained a rutile structure, though this structure was distorted by many stacking faults caused by the large oxygen deficiency. The electrical resistivity of the obtained TiO_2−δ layer exhibited unconventional metallic behavior with hysteresis. A metal–insulator transition occurred at 42 K, and the electrical resistivity exceeded 10⁴ Ω cm below 42 K. This metal–insulator transition could be caused by bipolaronic ordering derived from Ti–Ti pairings that formed along the stacking faults. The constant magnetization behavior observed below 42 K is consistent with the bipolaronic scenario that has been observed previously for Ti₄O₇. These peculiar electrical properties are strongly linked to the oxygen-deficient crystal structure, which contains many stacking faults formed by instantaneous heating during excimer laser irradiation.     

IR-Spektralanalyse von Gl?sern des Systems TeO2?V2O5

Studies of glasses and their crystalline products in the TeO₂–V₂O₅ system were made in the 1400–400 cm^–1 range. A continuous shift of the V=O-band from 1020 cm^–1 to 940 cm^–1 was found in the glasses with decreasing concentration of V₂O₅, as well as a sharp decrease in the intensity at 830 cm^–1. On the basis of the results obtained, it is concluded that with increasing TeO₂ content, the structure of the glasses is changed, caused by the breaking of the V–O–V bonds and the formation of Te–O–Te bridges.The IR-spectrum of the 2TeO₂·V₂O₅ compound in both crystalline and vitreous states was studied for the first time. The behaviour of the absorption bands is related to the structure of the glasses studied.     

Microimaging FT-IR spectroscopy on pathological breast tissues

Microimaging Fourier transform infrared spectroscopy is able to monitor differentiation between normal and malignant tissues. All the specimens, previously submitted to histological analysis, displayed abnormal spectra compared with the corresponding normal tissues with changes in many diagnostic bands like those arising from phosphate, C–O and CH stretching vibrational modes. The comparison between cancer (K) and connective (C) spectra evidenced the following differences: in the vCH region 3000–2800 cm⁻¹ no hypomethylation effect was evident in K; the convolution of the bands of connective indicated an expected higher membrane fluidity; in the neoplastic zone, Amide I and II modes showed convoluted bands with maxima at 1651 and 1547 cm⁻¹, respectively, indicating an α-helix conformation of proteins due to changes in the secondary structure proteins upon carcinogenesis. Other signature bands, such as the deformation O–P–O phosphate band at 965 cm⁻¹, suggested DNA conformational changes in solid cancer, infiltrating cancer and neoplasia in the region 1350–800 cm⁻¹. These characteristic bands have been monitored as a function of the degree of cancer progression. Chemometric methods, such as principal component analysis (PCA) and hierarchical clustering analysis (HCA) have been used in order to distinguish spectra of neoplastic and normal zones.     

Solvation Phenomena of Potassium Thiocyanate in Methanol–Water Mixtures

This paper reports the results of a variety of experiments carried out for understanding the solvation behavior of potassium thiocyanate in methanol–water mixtures. Electrical conductivity, speed of sound, viscosity, and FT-Raman spectra of potassium thiocyanate solutions in 5 and 10% methanol–water (w/w) mixtures were measured as functions of concentration and temperature. The conductivity and structural relaxation time suggest the ion–solvent and solvent-separated ion–ion associations increase as the salt concentration increases in the mixtures. The Raman band shifts due to the C–O stretching mode of methanol for the solvent mixtures reveal the formation of methanol–water complexes. The significant changes in the Raman bands for the C–N, C–S and O–H stretching modes indicate the presence of SCN⁻−solvent interactions through the N-end, “free” SCN⁻ and the solvent-shared ion pairs as potassium thiocyanate is added to the methanol–water mixtures. The relative changes corresponding to H–O–H bending and C–O stretching frequencies indicate that K⁺ is preferentially solvated by water in these solvent mixtures. The appearance and increase of the intensity of a broad band at ≈940 cm⁻¹ upon salt addition was attributed to the SCN⁻–H₂O–K⁺ solvent-shared ion pairs. No Raman spectral evidence for K⁺(H₂O)_n species was observed. The preferential solvation of K⁺ and SCN⁻ in the methanol−water mixtures was verified by the application of the Kirkwood−Buff theory of solutions. This theory confirms that K⁺ is strongly preferentially solvated by water, whereas SCN⁻ is preferentially solvated by the methanol component.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

Calculations of silicooxygen ring vibration frequencies

In the work model calculations of the vibrations of ideally isolated silicooxygen rings (using PM3 method) have been carried out. three-, four-, and six-membered rings have been considered. It has been found that that the three-membered silicooxygen rings are flat and practically undeformed showing D_3h symmetry. The rings of higher number of ring members (i.e. n>3) are deformed to some extent. The deformation reveals itself most significantly in the Si–O–Si bond angles distribution. In the case of all the rings the bridging Si–O–Si bonds are ca. 0.02–0.04 Å shorter than the non-bridging Si–O⁻ bonds. Hypothetical IR spectra for all the rings considered have been also calculated. Analysis of these hypothetical spectra leads to the conclusion that the whole spectrum can be divided into four wavenumbers regions, 1200–1100 cm⁻¹ stretching Si–O(Si) vibrations; 1000–800 cm⁻¹ stretching Si–O⁻ vibrations; 800–600 cm⁻¹; the region in which a band characteristic of silicooxygen rings appears, and below 600 cm⁻¹ bending ⁻O–Si–O⁻ and (Si)O–Si–O(Si). It has been also found that as the number of ring members increases the ‘ring band’ shifts to lower wavenumbers: 725 cm⁻¹ for three-membered rings, 650 cm⁻¹ for four-membered rings and 610 cm⁻¹ for six-membered rings. Calculated spectra have been compared with the experimental spectra of cyclosilicates. They showed good agreement in the 1200–600 cm⁻¹ region. In the experimental spectra as well as in the calculated ones, with increasing the number of ring members the ‘ring band’ shifts towards lower wavenumbers.     

Comparative study of the spectroscopic properties of Cr-doped LiAlO2 and LiGaO2

A detailed spectroscopic study of the optical characteristics of the tetrahedrally coordinated Cr⁴⁺ ion in LiAlO₂ and LiGaO₂ is given. From absorption and excitation measurements the crystal field parameter Dq and the Racah parameter B were determined to be Dq=1065 cm⁻¹, B=450 cm⁻¹, and Dq/B=2.4 for LiAlO₂ and Dq=1055 cm⁻¹, B=428 cm⁻¹, and Dq/B=2.5 for LiGaO₂. For the Racah parameter C only a lower limit can be given, i.e. 2417 cm⁻¹ for LiAlO₂ and 2667 cm⁻¹ for LiGaO₂. Due to the strong crystal field splitting — caused by the low site symmetry — the ³B(³T₂) crystal field component is the metastable and thus the emitting level. In the low-temperature absorption and emission spectra the expected three spin–orbit components of the ³B level are found at 8273, 8296, and 8300 cm⁻¹ for Cr⁴⁺:LiAlO₂ and 8610, 8623, and 8632 cm⁻¹ for Cr⁴⁺:LiGaO₂. The emission lifetime of Cr⁴⁺ in LiAlO₂ is 95 μs at 10 K and single exponential. In Mg-codoped LiAlO₂ and in LiGaO₂ the Cr⁴⁺ decay is double exponential. In Cr,Mg:LiAlO₂ two centers can be clearly distinguished, while in Cr:LiGaO₂ a variety of centers are observed, probably due to different charge compensation processes between Li, Ga, and Cr. The quantum efficiencies at room temperature are 42% for Cr:LiAlO₂ and 23% for Cr:LiGaO₂. Already at low temperature nonradiative decay processes occur. The temperature dependence of the lifetimes were analyzed with the model of Struck and Fonger. Excited state absorption measurements indicate that in the spectral region of the emission the excited state absorption cross-section is larger than the stimulated emission cross-section. Therefore laser oscillation is unlikely in these systems.     

Nanocrystalline ZnMn2O4 as a novel lithium-storage material

Nanocrystalline ZnMn₂O₄ is prepared by a polymer-pyrolysis route and used as a novel anode for lithium ion batteries. XRD and HRTEM studies reveal that the products are highly phase-pure and 30–60 nm in size. Galvanostatic cycling of ZnMn₂O₄ electrode at 100 mA g⁻¹ (about 0.52 mA cm⁻²) between 0.01 and 3.0 V up to 50 cycles exhibits almost stable cycling performance between 10 and 50 cycles with only an average capacity fade of 0.20% per cycle and the electrode still maintains a capacity of 569 mAh g⁻¹ after 50 cycles.     

Infrared diode laser spectroscopy of the ν = 2 band of AlF

A vibrational–rotational spectrum of the ν = 2 transitions of a high-temperature molecule AlF was observed between 1490 and 1586 cm⁻¹ with a diode laser spectrometer. Measurements were made on the ν = 3–1, 4–2, 5–3 and 8–6 bands at a temperature of 900 °C. Measured spectral lines were fitted to effective band constants ν₀, B_ν and D_ν for each band. Present measurements were made with only one Pb-salt laser diode. Physical significance of the effective band constants is discussed.     

Photoelectrochemical behavior of coupled SnO2|CdSe nanocrystalline semiconductor films

A photoelectrochemical cell with a coupled SnO₂|CdSe nanocrystalline semiconductor electrode has been prepared by sequential deposition of SnO₂ and CdSe films onto an optically transparent electrode (OTE), and its photoelectrochemical behavior has been studied. The results show that the coupling of CdSe with SnO₂ leads to an improvement in the performance of OTE|SnO₂|CdSe over OTE|CdSe cells in terms of increased incident photon-to-current conversion efficiency, increased stability and smaller reversal of current. The favorable positioning of the energy bands of SnO₂ and CdSe is responsible for the above observations. Various photoelectrochemical parameters of the OTE|SnO₂|CdSe cell obtained for an incident light power of 0.31 mW cm⁻² at 470nm, are as follows: I_sc ≈ 25–30 μA cm⁻², V_oc ≈ 0.5–0.6 V, ƒƒ = 0.47 and a power conversion efficiency of about 2.25%.     

Investigation of silicate mineral sanidine by vibrational and NMR spectroscopic methods

Sanidine, a variety of feldspar minerals has been investigated through optical absorption, vibrational (IR and Raman), EPR and NMR spectroscopic techniques. The principal reflections occurring at the d-spacings, 3.2892, 3.2431, 2.9022 and 2.6041 Å confirm the presence of sanidine structure in the mineral. Sanidine shows five prominent characteristic infrared absorption bands in the region 1200–950, 770–720, 590–540 and 650–640 cm⁻¹. The Raman spectrum shows the strongest band at 512 cm⁻¹ characteristic of the feldspar structure, which contains four membered rings of tetrahedra. The UV–vis–NIR absorption spectrum had strong absorption features at 6757, 5780 and 5181 cm⁻¹ due to the combination of fundamental OH– stretching. The bands at 11236 and 8196 cm⁻¹and the strong, well-defined band at (30303 cm⁻¹ attest the presence of Fe²⁺ and Fe³⁺, respectively, in the sample. The signals at g = 4.3 and 3.7 are interpreted in terms of Fe³⁺ at two distinct tetrahedral positions Tl and T2 of the monoclinic crystal structure The ²⁹Si NMR spectrum shows two peaks at −97 and −101 ppm corresponding to T2 and T1, respectively, and one peak in ²⁷Al NMR for Al(IV).     

Resonance Raman spectroscopy of mass selected Al2 in an argon matrix

In an excitation range of 620–760 nm, resonance Raman spectra of aluminum dimers (Al₂) in an argon matrix have been obtained for the first time. Temperature annealing experiments were performed to remove Raman lines attributed site effects caused by the Al₂/Ar matrix. We observe a single fundamental at 293.3 (5) cm⁻¹ along with a progression up to 1149 (1) cm⁻¹. Taking successive differences of band centers we obtain spectroscopic constants for the ground state fundamental, ω_e=297.5 (5) cm⁻¹, the anharmonicity, ω_ex_e=1.68 (8) cm⁻¹. Our results are in close agreement with previous experimental results for Al₂ which designate the ground state as a ³Π_u state, and may be considered as confirmation of this assignment.     

Diffuse reflectance spectra of iron(III) vanadates

The electronic spectra of solid iron(III) vanadates FeVO₄ and Fe₂V₄O₁₃ were investigated by the diffuse reflectance technique in the spectral range 12 500–50 000 cm⁻¹. The spectra of investigated vanadates contain 2–3 intensive CT bands in the UV region and two lowest energy d–d bands in the 12 000–22 000 cm⁻¹ range. The presence of the weak bands for FeVO₄ and Fe₂V₄O₁₃ at 16 500 cm⁻¹ and 20 500 cm⁻¹ points to the lattice deffects (oxygen deficiency and the presence of the V⁴⁺ ions) in the structure of investigated vanadates.     

In vivo molecular evaluation of guinea pig skin incisions healing after surgical suture and laser tissue welding using Raman spectroscopy

The healing process in guinea pig skin following surgical incisions was evaluated at the molecular level, in vivo, by the use of Raman spectroscopy. After the incisions were closed either by suturing or by laser tissue welding (LTW), differences in the respective Raman spectra were identified. The study determined that the ratio of the Raman peaks of the amide III (1247 cm⁻¹) band to a peak at 1326 cm⁻¹ (the superposition of elastin and keratin bands) can be used to evaluate the progression of wound healing. Conformational changes in the amide I band (1633–1682 cm⁻¹) and spectrum changes in the range of 1450–1520 cm⁻¹ were observed in LTW and sutured skin. The stages of the healing process of the guinea pig skin following LTW and suturing were evaluated by Raman spectroscopy, using histopathology as the gold standard. LTW skin demonstrated better healing than sutured skin, exhibiting minimal hyperkeratosis, minimal collagen deposition, near-normal surface contour, and minimal loss of dermal appendages. A wavelet decomposition–reconstruction baseline correction algorithm was employed to remove the fluorescence wing from the Raman spectra.     

Synthesis and characterization of novel phthalocyanines bearing quaternizable coumarin

The synthesis of novel metal-free and zinc phthalocyanines with four 3-[(2-diethylamino)ethyl]-7-oxo-4-methylcoumarin dye groups on the periphery were prepared by cyclotetramerization of a novel 3-[(2-diethylamino)ethyl]-7-[(3,4-dicyanophenoxy)]-4-methylcoumarin. The novel chromogenic compounds were characterized by elemental analysis, ¹H NMR, ¹³C NMR, MALDI-TOF, IR and UV–Vis spectral data. The electronic spectra exhibit bands of coumarin identity along with characteristic Q and B bands of the phthalocyanine (Pc) core. The IR spectra of all the Pcs showed three characteristic intense bands, at 1704 cm⁻¹ for the lactone carbonyl and two bands at 1489–1604 cm⁻¹ for the conjugated olefinic system.