Coupling miniaturized liquid chromatography to capillary gas chromatography (micro-LC-CGC): Possibilities of reversed phase LC

Retention gaps with different polarity treatments were evaluated for reversed phase solvents. Aminopropyl- and cyanopropyl-deactivated retention gaps showed the best results for methanol-water mixtures. A reversed phase packed fused silica capillary LC column is connected on-line with a capillary gas chromatography column. The combination was used for the analysis of diazepam in urine. Volume overloading on packed fused silica columns without loss of too much efficiency was demonstrated for propranolol.     

Life-time studies with capillary electrochromatography columns operated under different conditions

A test system has been established to permit the monitoring of the life-time performance of several reversed- phase capillary electrochromatography (CEC) columns. The retention factors, k(cec), peak symmetry coefficients, lambda(sym), and column efficiencies, N, of three neutral n-alkylbenzene analytes, namely ethyl-, n-butyl- and n-pentylbenzenes, were determined for Hypersil 3 microm n-octylsilica and n-octadecylsilica packed into CEC capillary columns of 100 microm I.D., with a packed length of 250 mm, and a total length of 335 mm. The performances of these CEC capillary columns were examined for a variety of eluents with pH values ranging between pH 2.0 - 8.0, similar to those employed to study the retention behaviour of peptides that we have previously reported. The relative standard deviation (RSD) of the retention factors (k(cec) values) of these n-alkylbenzenes, acquired with an eluent of (25 mM Tris-HCl, pH 8.0,)-acetonitrile (1:4, v/v), when the CEC capillary columns were used for the first time (virgin values), were 4% (based on data acquired with 4 CEC capillary columns) for the n-octyl bonded silica capillary columns, and 6% (based on 8 columns) for n-octadecyl bonded silica capillary columns. The RSD values of the k(cec) values of the n-alkylbenzenes for one set of replicates (n=6) with one CEC capillary column was < 0.5%. The theoretical plate numbers, N, for the virgin CEC capillary columns were ca. 60,000, whilst the observed N values for all new CEC capillary columns were > or = 40,000 for n-octyl bonded silica capillary columns and > or = 50,000 for n-octadecyl bonded silica capillary columns. The peak symmetry coefficients, lambda(sym), of the n-alkylbenzenes for virgin CEC capillary columns and for CEC capillary columns used for more than 1,000 injections were always in the range 0.95-1.05. The experimental results clearly document that the life-time performance of the CEC capillary columns depends on the eluent composition, as well as the nature of the analytes to which the CEC capillary columns are exposed.     

Rapid determination of organochlorine pesticide residues in feeds by capillary gas chromatography

A simple micro-method is described for determination of 15 organochlorine pesticide residues in mixed feeds. Clean-up of the petroleum ether extract is by basic alumina minicolumn chromatography and quantitative identification is by capillary gas chromatography with electron capture detection. Cyanopropyl-polysiloxane chemically bonded fused silica capillary columns have been used to perform high resolution analyses in short time as well as to overcome possible interferences by PCBs. Recovery, repeatability, and detection limits of the proposed procedure are checked and results are also reported for non random samples of 180 feeds collected in Italy.     

A glycopeptide antibiotic chiral stationary phase for the enantiomer resolution of hydroxy acid derivatives by capillary electrochromatography

Separation of hydroxy acid enantiomers was achieved by using capillary electrochromatography (CEC) employing a chiral stationary phase (CSP) based on MDL 63,246 (Hepta-Tyr), a macrocyclic antibiotic of the teicoplanin family. The chiral selector was chemically bonded to 5 num diol-modified silica particles and the CSP mixed with amino silica (3:1 w/w) was packed into a 75 num ID fused-silica capillary. The CEC experiments were carried out by using an aqueous reversed-phase mode for the enantiomeric resolution of hydroxy acid compounds. Good enantioresolution was achieved for mandelic acid (MA), m-hydroxymandelic acid (m-OH-MA), p-OH-MA, and 3-hydroxy-4-methoxymandelic acid (3-OH-4-MeO-MA). The CEC system was less enantioselective towards 2-phenyllactic acid (2-PhL) and 3-PhL while mandelic acid methyl ester (MA-Et-Est) enantiomers were not resolved. Several experimental parameters, such as organic solvent type and concentration, buffer pH, capillary temperature, on enantioresolution factor, retention time, and retention factor were studied.     

Inner wall coating of micro-LC columns. Wall effects in LC

An elastic inner wall coating in the fused silica capillaries used for Micro-LC (LC on packed fused silica capillary columns) stabilizes the packed bed and thus increases column efficiency and life expectancy. Probably the particles of packing material are partly forced into the elastic polymer layer which thus holds the packing in position. Bonded polymers of very different chemical polarity can be used with equally good results. Variation of the coating layer thickness shows that there is an optimum value around 0.3 μm. A discussion of various wall effects in LC columns is presented. The i.d. of the columns is a most important parameter in this respect.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Direct diagnosis of tuberculosis by computer assisted pattern recognition gas chromatographic analysis of sputum

Chemical detection of tuberculosis (TB) products in sputum was attempted by using gas chromatographic analysis in conjunction with different pattern recognition computer models. For the chromatographic separations, we used a 2 mm x 1.8 m packed column and a 0.25 mm x 30 m fused silica capillary column to analyse the methylated glycosides and fatty acid methyl ester derivatives. Three computer pattern recognition methods were applied: error score, TB score and discriminant analysis. These methods predicted the presence of active TB most often in sputa of active TB patients and less so in those from inactive, suspected and non-TB patients, in that order. Although the best true positive of 75% was obtained from the TB score method and best true negative of 98% from discriminant analysis, the accompanying false positive and false negative results (36% and 50%, respectively) were unacceptable. The use of capillary column or fatty acid methyl ester derivatives of the samples did not improve on the predictive values of chromatograms obtained from the packed column on trimethylsilylglycosidic derivatives. Additional work is needed before this method can have a direct clinical application.     

Cetyltrimethylammonium Bromide as a Surface Modifier in Paper Separation of 2,4‐D and Silvex Herbicides from Aqueous Solutions

The paper capillary permeation adsorption (PCPA) separation of 2,4‐D and silvex herbicides from water by the addition of cetyltrimethylammonium bromide (CTAB) was studied. The effect of pH, CTAB concentration, and the type of PCPA treatment on separatability has been investigated. A nearly 100% separatability was obtained for each of 2,4‐D and silvex at pH values larger than 7 and 5, respectively. The separatability is greater than that without an addition of CTAB. It was confirmed that 2,4‐D and silvex are adsorbed as molecules on the fiber surface that contains ion pairs CTA⁺COO^? formed by the combination of CTA⁺ cations with the carboxyl groups bonded in the fiber surface.     

Polymetacrylate and hybrid interparticle monolithic columns for fast separations of proteins by capillary liquid chromatography

Preparation of organic polymer monolithic columns in fused silica capillaries was aimed at fast gradient separation of proteins. For this purpose, polymerization in situ procedure was optimized, using ethylene dimetacrylate and butyl metacrylate monomers with azobisisobutyronitrile as initiator of the polymerization reaction in presence of non-aqueous porogen solvent mixtures composed of 1-propanol and 1,4-butanediol. The separation of proteins in totally monolithic capillary columns was compared with the chromatography on a new type of "hybrid interparticle monolithic" capillary columns, prepared by in situ polymerization in capillary packed with superficially porous spherical beds, 37-50 microm. The "hybrid" columns showed excellent stability and improved hydrodynamic flow properties with respect to the "totally" monolithic capillary columns. The separation selectivity is similar in the two types of columns. The nature of the superficially porous layer (bare silica or bonded C18 ligands) affects the separation selectivity less significantly than the porosity (density) of the monolithic moiety in the interparticle space, controlled by the composition of the polymerization mixture. The retention behaviour of proteins on all prepared columns is consistent with the reversed-phase gradient elution theory.     

Novel fused silica capillary columns: Surface modification through controlled doping of the preform-tube

A method has been developed for fabricating fused silica capillary columns which have specific surface properties but still retain the excellent strength, flexibility, and resilience of pure fused silica. By using the Modified Chemical Vapor Deposition process (MCVD), typically used for the production of optical fiber lightguides, inorganic dopants such as Al, Nd, Ge, and P can be introduced into the preform-tube by MCVD. Doped columns have a wide range of specific surface properties, and columns with undoped fused silica prepared by MCVD are more chemically inert and less acidic than columns prepared by conventional methods. This paper describes the method for fabricating capillaries and the initial studies to characterize them.     

Separation of carbohydrates by liquid chromatography on silica gel,adding adsorption modificators to the eluent

Summary For the separation of carbohydrates by liquid chromatography, utilizing the intermolecular interaction with amino groups on the surface of the adsorbent, two types of adsorbents were used: silica gel modified by adding to the eluent a diamine, and a chemically bonded phase prepared by the reaction of -aminopropyl triethoxy silane with silica gel. Mono- di- and trisaccharides could be separated on silica gel modified by the adsorption of piperazin and ethylene diamine from the eluent. The separation capacity of columns packed with silica gel with bonded NH₂ groups and with silica gel having diamines adsorbed on its surface is similar. The retention volumes of 15 carbohydrates were measured on columns containing silica gel with hydroxylated surface and on silica gel modified with piperazin from the eluent consisting of acetone-water. Comparison of acetone-water and acetonitrile-water as the eluent showed that the former is also suitable for the analysis of carbohydrates.     

Glass open-tubular capillary columns with chemically bonded methyl-phenyl siloxane stationary phases of tailor made polarity

Summary The previously described method yielding apolar, chemically bonded methyl polysiloxane glass capillary columns was extended to the production of capillary systems of controlled polarity. The approach involved prior synthesis of a reactive methyl-phenyl polysiloxane polymer by copolymerisation of a mixture of dimethyl and diphenyl chlorosilanes. The polymer was then chemically bonded to the capillary glass surface to yield remarkably stable, high resolution analytical systems which were shown to be particularly well suited to the separation of biochemical mixtures at the subnanogram level. The principle of copolymerisation of differently substituted silanes confers to the method a considerable flexibility which could be used to devise polar capillary systems tailor made for a given analytical problem.     

Simultaneous determination of two serine proteinases by hydrophobic interaction chromatography

Summary An LC clean-up procedure based upon a complexation between polycyclic aromatic hydrocarbons (PAHs) and silica with chemically bonded 2,4-dinitroaniline has been combined with GC/MS. The LC pre-separation makes it possible to obtain a relatively clean fraction of PAHs free from alkanes, alkylbenzenes and naphthalenes, PCBs, chlorinated pesticides and many other interfering compounds. This fraction has been analyzed using capillary GC and mass selective detector (MSD). Substantial improvement of the MS spectra of PAHs with three or more fused benzene rings is achieved.     

Fabrication of Bonded Monolithic Porous Layer Open Tubular (monoPLOT) Columns in Wide Bore Capillary by Laminar Flow Thermal Initiation

A novel scalable procedure for the thermally initiated polymerisation of bonded monolithic porous layers of controlled thickness within open tubular fused silica capillaries (monoPLOT columns) is presented. Porous polymer layers of either polystyrene-divinylbenzene or butyl methacrylate-ethylene dimethacrylate, of variable thickness and morphology were polymerised inside fused silica capillaries utilising combined thermal initiation and laminar flow of the polymerisation mixture. The procedure enables the production through thermal initiation of monoPLOT columns of varying length, internal diameter, user defined morphology and layer thickness for potential use in both liquid and gas chromatography. The morphology and thickness of the bonded polymer layer on the capillary wall is strongly dependent on the laminar flow properties of the polymerisation mixture and the changing shear stress within the fluid across the inner diameter of the open capillary. Owing to the highly controlled rate of polymerisation and its dependence on fluid shear stress at the capillary wall, the procedure was demonstrably scalable, as illustrated by the polymerisation of identical layers within different capillary diameters.     

On the stability of micro-LC columns (packed fused silica capillary columns)

The life expectancy and resistance to flow, pressure shocks, solvent gradients, and bending of packed fused silica capillary columns (Micro-LC) are discussed.     

Evolution and application of the fused silica column

Fused silica is an evolutionary product of continuing efforts to improve our chromatographic capabilities. It offers the normal user new horizons in inertness, chromatographic reproducibility, ease of column installation, and possibilities in on-column trapping. Since this writing, chemically bonded phases in several film thicknesses became available on fused silica columns, and these are especially well suited to on-column injections. The use of fused silica syringe needles to inject directly onto fused silica columns seems particularly interesting. Evolution is, of course, a continuous process and it would appear that we can expect continuing developments in this exciting area.     

The Development of Reversed‐Phase Capillary Electrochromatography for the Separation of Steroids

This paper describes the preparation and optimization of packed capillary columns for reversed‐phase separation of steroids with CEC. The fabrication of on‐column frits is considered to be the most important step for obtaining a reproducible packed column for CEC separation. Porous silicate frits were generated in a fused‐silica capillary by heating the silica gel/sodium hydroxide solutions electrically. The optimized conditions involve silica gel (10.8%), sodium hydroxide (5.8%), and heating time (5 sec) with heating voltage (5V) for obtaining a 100‐μ end‐frit that can withstand pressure over 6000 psi. A HPLC pump was utilized to pack the 5‐μm ODS particle slurry into the capillary column. The ODS packed capillaries were then utilized for the separation of four anabolic cholesterols with a capillary electrophoresis system without pressurization of the column. The reproducibility of the packed columns was evaluated by measuring the relative standard deviations of four steroids. The relative standard deviations of migration time for column‐to‐column, day‐to‐day, and run‐to‐run are less than 7%, 2%, and 1% for four steroids, respectively.     

Enantiomer separation by capillary electrochromatography using fritless packed columns.

This review summarizes recent developments in the field of enantiomer separation by capillary electrochromatography using fritless packed columns. Various enantiomers have been separated by employing fritless packed columns prepared in a fused silica capillary either by the immobilization of chiral packing materials by sintering or sol-gel technology or by in situ polymerization of a mixture containing chiral selectors. The details of the column preparation procedures and the attainable column performance are described.     

Fabrication of Bonded Monolithic Porous Layer Open Tubular (monoPLOT) Columns in Wide Bore Capillary by Laminar Flow Thermal Initiation

A novel scalable procedure for the thermally initiated polymerisation of bonded monolithic porous layers of controlled thickness within open tubular fused silica capillaries (monoPLOT columns) is presented. Porous polymer layers of either polystyrene-divinylbenzene or butyl methacrylate-ethylene dimethacrylate, of variable thickness and morphology were polymerised inside fused silica capillaries utilising combined thermal initiation and laminar flow of the polymerisation mixture. The procedure enables the production through thermal initiation of monoPLOT columns of varying length, internal diameter, user defined morphology and layer thickness for potential use in both liquid and gas chromatography. The morphology and thickness of the bonded polymer layer on the capillary wall is strongly dependent on the laminar flow properties of the polymerisation mixture and the changing shear stress within the fluid across the inner diameter of the open capillary. Owing to the highly controlled rate of polymerisation and its dependence on fluid shear stress at the capillary wall, the procedure was demonstrably scalable, as illustrated by the polymerisation of identical layers within different capillary diameters.

     

Determination of chlorophenoxy acid herbicides and their esters in soil by capillary high performance liquid chromatography with ultraviolet detection, using large volume injection and temperature gradient

A simple method for the simultaneous determination of chlorophenoxy acid herbicides and their esters in soil is presented. Compounds studied are: 2,4-dichlorophenoxyacetic acid (2,4-D), 4-(2,4-dichlorophenoxy)butanoic acid (2,4-DB), 2,4-dichlorophenoxyacetic-1-butyl ester (2,4-D-1-butyl ester), and 2,4-dichlorophenoxyacetic-1-methyl ester (2,4-D-1-methyl ester).

The chromatographic analysis was carried out by HPLC, after ultrasonic extraction, on a C₁₈ packed capillary column with temperature gradient, large injection volumes and UV detection at 232 nm. Samples were spiked with amounts between 2.5 and 6.0 μg g⁻¹ of each herbicide; recoveries obtained were between 72 and 97% (n=3 for each spiked level) and detection limits were between 0.3 and 0.5 μg g⁻¹.

Application of this procedure to the analysis of herbicides in ester and acid forms showed the effectiveness of the methodology proposed.