Novel benzyl sulfonium salt having an aromatic group on sulfur atom as a latent thermal initiator

Three benzyl p-hydroxyphenyl methylsulfonium salts with different counter anions were synthesized as novel latent thermal initiators. Syntheses of the sulfonium salts ( 2 ) were performed by the reaction of p-hydroxyphenyl methyl sulfide with benzyl chloride followed by exchange of the counter anion (Cl^?) with SbF^?₆ ( 2a ), PF^?₆ ( 2b ), or BF^?₄ ( 2c ). In the bulk polymerization of glycidyl phenyl ether (PGE) with 2 , initiator activity of the sulfonium salts was evaluated by comparison with that of benzyl tetramethylenesulfonium hexafluoroantimonate ( 1 , R = H). Among the initiators, 2a showed the highest activity, and was much more active than 1 (R = H). Since the polymerization of PGE with 2a proceeded efficiently at more than 80°C but not at all at less than 60°C, 2a was suggested to be a good latent thermal initiator.     

Novel photoinitiated cationic copolymerizations of 4-methylene-2-phenyl-1,3-dioxolane

Photoinitiated polymerization of 4-methylene-2-phenyl-1,3-dioxolane ( 1 ) was carried out using either tris (4-methylphenyl) sulfonium hexafluoroantimonate or 4-decyloxyphenyl phenyliodonium hexafluoroantimonate as initiators. ¹H-NMR analyses confirmed exclusive ring-opening while DSC and SEC were used to determine the glass transition temperatures (T_gs) and molecular weights, respectively. Photoinitiated cationic copolymerizations of 1 were investigated with several acyclic and cyclic monomers. Copolymerization of 1 with vinyl ethers and a spiroorthoester resulted in copolymers whose thermal properties were dependent on comonomer ratios. Copolymers of 1 and dihydrofuran or dihydropyran afforded soluble polymers with T_gs significantly higher than the homopolymer of 1 . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2207–2219, 1997     

Photocrosslinking of copolymers of vinyloxyethyl methacrylate–styrene initiated by sulfonium salts. I. Transient species formed on photolysis of sulfonium salt

Benzyl cation was detected by transient absorption spectroscopy with a spectroscopic multichannel analyzer on pulse excitation (fourth harmonic of Nd:YAG laser, 266 nm; 10 ns fwhm) of benzyl(4-hydroxyphenyl) methylsulfonium hexafluoroantimonate(BSS) in 1,2-dichloroethane (EDC). The benzyl cation was long-lived (lifetime, 59 ms) at room temperature and quenched by a vinyl ether compound. The formation of the benzyl cation as active species on photolysis of BSS is in contrast to the formation of Brønsted acids in other sulfonium salts so far reported. © 1992 John Wiley & Sons, Inc.     

(4-羟基苯基)甲基苄基硫鎓六氟锑酸盐的合成及表征

以4-羟基苯硫酚和氯苄为原料、三乙胺为缚酸剂,制备了4-苄硫基苯酚;4-苄硫基苯酚在甲苯溶液中,经硫酸二甲酯甲基化制备了（4-羟基苯基）甲基苄基硫鎓硫酸盐;室温甲醇溶剂中,与六氟锑酸钠离子进行交换合成了目的产物（4-羟基苯基）甲基苄基硫鎓六氟锑酸盐。通过紫外光谱和核磁共振测定,对产物进行了结构鉴定。总收率大于75%。     

Synthesis and activity of aryl benzyl methyl sulfonium salts as cationic initiators: Effect of substituent on aryl group

Benzyl o-, m-, and p-substituted phenyl methyl sulfonium salts ( 2b – 2g ) were synthesized and their activities as cationic initiators were evaluated in the bulk polymerization of phenyl glycidyl ether (PGE). Especially, their activities were estimated with respect to the effect of substituents on the aryl groups. In the polymerizations of PGE with a series of benzyl p-substituted phenyl methyl sulfonium salts, the order of their activities was found to be 2c (CH₃OCOO) > 2b (CH₃COO) > 2d (CH₃O) ～ 2a (HO). In particular, 2c was the most active initiator of all, capable of initiating the polymerization of PGE even at room temperature. In the polymerizations with 2a, 2e (m-Cl), 2f (o-CH₃), and 2g (m-CH₃), the activity of 2e was the highest of all while those of 2a, 2f , and 2g were almost the same. These results strongly suggested that the electron-withdrawing group placed on the aryl group undoubtedly enhanced the activity of the sulfonium salts as the cationic initiators.     

Dual roles for promoting monomers to polymers: A conjugated sulfonium salt photoacid generator as photoinitiator and photosensitizer in cationic photopolymerization

An efficient strategy for comprehensive utilization of the conjugated sulfonium salt photoacid generator (PAG), namely, 3‐{4‐[4‐(4‐N,N′‐diphenylamino)‐styryl]phenyl}phenyl dimethyl sulfonium hexafluoroantimonate, was developed through photoinitiated cationic photopolymerization (CP) of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 425 nm). Photochemical mechanisms were investigated by UV–vis spectra, molecular orbital calculations, fluorescence, cyclic voltammetry, and electron spin resonance spin‐trapping analyses. Compared with commercial PAGs, the prepared conjugated sulfonium salt generated H⁺, which can be used as photoinitiator. Moreover, the fluorescent byproducts from photodecomposition can be used as photosensitizer of commercial iodonium salt in the photoinitiating systems of CP. These novel D‐π‐A type sulfonium‐based photoinitiating systems are efficient (epoxide conversion = 85–90% and vinyl conversion >90%; LEDs upon exposure to 365–425 nm) even in low‐concentration initiators (1%, w/w) and low curing light intensities (10–40 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2722–2730     

Design of latent catalysts and their application to polymer synthesis

Design of latent catalysts such as benzyl sulfonium, benzyl ammonium, benzyl pyridinium, benzyl phosphonium, and hydrazinium salts, and their application to polymer synthesis have been described. They have been demonstrated as excellent thermal or photolatent catalysts for polymerizations of cyclic monomers such as epoxides, bicyclo orthoesters, spiro orthocarbonates, and vinyl monomers such as styrene and vinyl ethers.     

Effect of alkyl substituents on initiator activity in cationic polymerization of styrene with p-methoxybenzyldialkylsulfonium salts as initiators

The effect of alkyl substituents on cationic polymerization of styrene with p-methoxybenzyldialkysulfonium salts was studied. p-Methoxybenzyl tetramethylene ( 1 ), dimethyl ( 2 ), diethyl ( 3 ), dibuty ( 4 ), and diisopropylsulfonium salts ( 5 ) were synthesized by the reaction of p-methoxybenzyl bromide with the corresponding sulfides, followed by exchange of the counter anion Br^? with SbF^?₆. These sulfonium salts served as potent cationic thermal initiators of which activity was estimated by the bulk and solution polymerizations of styrene. The bulk polymerizations with 1–4 (0.1 mol %) for 30 min gradually proceeded at 30–50°C, but the exothermic polymerization occurred vigorously at 40–60°C. The Polymerization with 5 took place exothermically even at room temperature. Temperature-conversion curves of the polymerizations for 30 and 5 min revealed that the activity of the sulfonium salts was in the following order: 5 > 4 > 3 > 2 ≈ 1 . This order was explained by the order of the bulkiness of the alkyl substituents on the sulfur atom. Number-average molecular weight (M?_n) of polystyrene obtained by the polymerization undergoing no exothermic process was in a range of 6600–16000, which depended on the structure of the alkyl substituents: the more bulky the substituent was, the higher M?_n was.     

Nickel-Catalysed Cross-Electrophile Coupling of Benzyl Bromides and Sulfonium Salts towards the Synthesis of Dihydrostilbenes

A nickel-catalysed reductive cross-coupling reaction between benzyl sulfonium salts and benzyl bromides is reported. Simple, stable and readily available sulfonium salts have shown their ability as leaving groups in cross-electrophile coupling, allowing the formation of challenging sp³–sp³ carbon-carbon bonds, towards the synthesis of interesting dihydrostilbene derivatives. In addition, benzyl tosyl derivatives have been demonstrated to be suitable substrates for reductive cross-coupling by in-situ formation of the corresponding sulfonium salt.     

Factors influencing EB curing of epoxy matrix

The effectiveness of electron beam (EB) curing of epoxy resins was found to be influenced by catalyst. In the presence of iodonium salt (diaryl iodonium hexafluoroantimonate, C3), the EB curing of epoxy resin is easier than in the presence of triaryl sulfonium hexafluoroantimonate (C1), or triaryl sulfonium hexafluorophosphate (C2), or iron arene containing cationic catalyst (Irgacure 261). The epoxy 616 (diglycidyl ether of bisphenol A) and 648 (diglycidyl ether of phenolic novolacs) can be cured by the above onium salts catalysts C1–C3. The epoxy with glycidyl amino epoxide group (such as AG 80; AFG 90) could not be cured by onium salts catalyst. The influence of irradiation dose, temperature and the effect of impurities on curing reaction were investigated.     

Preparation of Polymer-Supported Chiral 1,2-Diamine as an Efficient Ligand for Asymmetric Hydrogenation Catalyst

An enantiopure 1,2-diamine having two phenolic hydroxy groups was synthesized, and attached to chloromethylated poly(styrene) through a benzyl ether linkage. The polymer-supported Ru precatalysts were prepared from the polymeric chiral 1,2-diamine and RuCl₂/BINAP complex. In the presence of t-BuOK the polymeric catalyst system worked well in asymmetric hydrogenation of aromatic ketones in a mixed solvent of 2-propanol and DMF. The insoluble polymeric catalyst was readily separated from the reaction mixture and reused at least several times without loss of the catalytic activity.     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

β-(Trifluoromethyl)vinyl sulfonium salts: preparation and reactions with active methylene and methenyl compounds

Two trifluoromethyl-substituted building blocks β-(trifluoromethyl)vinyl sulfonium salts 1 and 2 were developed. Reactions of β-(trifluoromethyl)vinyl sulfonium salt 1 with active methylene compounds containing electron-withdrawing groups using DBU as the base in DMSO occurred to give trifluoromethyl-substituted cyclopropane derivatives 7 as the major products. In contrast, reactions of β-(trifluoromethyl)vinyl sulfonium salt 2 with active methylene compounds occurred with the migration of one of the electron-withdrawing groups to give the products 8 as the major products when NaH was used as the base in DMSO. Moreover, when NaH was used as base in THF/CH(2)Cl(2) at -78 °C, reaction of β-(trifluoromethyl)vinyl sulfonium salt 1 gave trifluoromethyl-substituted 2,3-dihydrofuran derivatives 9 as the major products. A working mechanism was proposed to explain the different behaviors of the β-(trifluoromethyl)vinyl sulfonium salts 1 or 2 with active methylene compounds under these different conditions.     

Photocrosslinking of copolymers of vinyloxyethyl methacrylate-styrene initiated by sulfonium salts. II. Photocrosslinking behaviors

Vinylether was used as a cationically polymerizable moiety and incorporated into sidechain of polymers as copolymers of vinyloxyethyl methacrylate (VEM) and styrene (St). Photoirradiation of the copolymers containing a small amount of benzyl(4-hydroxyphenyl) methylsulfonium salt (BSS) resulted in a high crosslinking density as evidenced by a low degree of swelling, which is ascribed to the high reactivity of the vinyloxy moieties. The sensitivity of this photoreaction is significantly high because of a large kinetic chain length of the cationic polymerization of vinylethers, while copolymers of glycidyl methacrylate and St showed crosslinking to much less extent when irradiated under the same condition. The ability of other sulfonium salts, (4-hydroxyphenyl) methyl(4-nitrobenzyl) sulfonium salt and (4-hydroxyphenyl) methyl(1-naphthylmethyl)sulfonium salt, to induce photocrosslinking was also examined. © 1992 John Wiley & Sons, Inc.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

Cationic polymerization with p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts: Effect of substituents and mechanistic aspects of initiation reaction

Various p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts ( 2 ) were synthesized and their initiator activities were evaluated in bulk polymerization of glycidyl phenyl ether (PGE). The order of the activity was found to be 2b (X = CH₃) > 2a (X = H) ≈ 2c (X = Cl) > 2d (X = NO₂), indicating that the introduction of an electron-donating group enhanced the activity. In Hammett's plots, the logarithm of the ratio of the polymerization rates (log k_x/k_H) was correlated with σ⁺_ρ better than with σ_p and a negative ρ⁺ value (-1.18) was obtained. Reaction of 2a with benzyl mercaptan mainly gave dibenzyl sulfide and p-hydroxyphenyl methyl sulfide. The obtained results seemed to demonstrate that the OH group of the aryl group yielded no proton as initiator for the polymerization, whereas the benzyl group caused the polymerization, which was initiated by the corresponding benzyl cation formed by C? S bond cleavage. © 1993 John Wiley & Sons, Inc.     

Studies on propagating species in cationic polymerization of styrene derivatives by acetyl perchlorate or iodine. III. Effect of salt on cationic copolymerization of styrene derivatives with vinyl ethers by acetyl perchlorate

A common-ion salt, tetra-n-butylammonium perchlorate, was found to affect the monomer reactivity ratios in the cationic copolymerization by acetyl perchlorate of styrene with p-methylstyrene and of 2-chloroethyl vinyl ether with p-methylstyrene, but not those for the copolymerization of 2-chloroethyl vinyl ether with isobutyl vinyl ether. In the copolymerization of p-methylstyrene with styrene or with 2-chloroethyl vinyl ether, the addition of the common-ion salt in a polar solvent shifted the monomer reactivity ratios to those in a less polar solvent. The molecular weight distribution analysis of the copolymer suggested that the addition of the common-ion salt depresses the dissociation of propagating species. Therefore, it was concluded that a propagating species with a different degree of dissociation shows a different relative reactivity towards two monomers. The nature of propagating species was also discussed on the basis of the common-ion effect on the monomer reactivity ratios in various solvents.     

Emulsion polymerization and copolymerization of vinyl benzoate

Emulsion polymerization of vinyl benzoate and its copolymerization with vinyl acetate or styrene are described. The effect of the potassium persulfate initiator, and the sodium lauryl sulfate emulsifier concentration on the rate of vinyl benzote homopolymerization and the molecular weight of the polymers was determined. In copolymerization with vinyl benzoate, both comonomers, vinyl acetate and styrene, decrease the initial polymerization rate. With increasing amounts of styrene in the comonomer mixture the polymerization rate increases but with vinyl acetate an opposite effect is observed. Reactivity ratios of copolymerizations were determined. For the vinyl benzoate [M₁]-styrene [M₂] comonomer system a r₁ = 0.03 and a r₂ = 29.58 and for vinyl benzoate [M₁]-vinyl acetate [M₂], a r₁ = 1.93 and a r₂ = 0.20 was obtained. From the vinyl benzoate-styrene reactivity ratios the Qe parameters were calculated.     

Chemically functionalized clay vinyl ester nanocomposites: Effect of processing parameters

The primary objective of this study was to improve montmorillonite clay‐platelet separation in vinyl ester resin matrix by organically modifying the nanoclay platelet with a partially reactive onium salt. The reactive onium salt (ω‐undecylenyl amine hydrochloride) was synthesized from commercial ω‐undecylenyl alcohol through a series of synthetic conversions. Nonreactive onium salt (undecyl amine hydrochloride) was made from commercial undecyl amine. These salts were characterized with ¹H and ¹³C NMR and Fourier transform infrared techniques. The relative amounts of exfoliated, intercalated, and as‐treated clay and the size of the clay particle aggregates depended significantly on the composition of clay and the processing conditions. When the clay was ion‐exchanged with a mixture of reactive and nonreactive onium salts, a partially exfoliated vinyl ester resin polymer nanocomposite was formulated. The addition of a comonomer styrene and high‐intensity ultrasonic mixing produced vinyl ester nanocomposite with the highest degree of clay‐platelet exfoliation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1310–1321, 2004