Infrared spectroscopy of ethylene–vinyl chloride copolymers

This paper continues an investigation into the ethylene–vinyl chloride copolymers prepared by partial reduction of poly(vinyl chloride). The infrared spectra of the copolymers have been obtained and the individual resonances assigned. Each infrared band has been quantitatively analyzed in terms of peak position (cm^?1) and intensity, and correlations with the sequence microstructure (dyad, triads, etc.) have been determined. The infrared resonances have been found to be sensitive to long sequences; i.e., (V)_x or (E)_x where x ≥ 10. Sequences of up to 10–15 monomer units were seen to affect the position (cm^?1) and intensity of C? H stretching and bending frequencies. Methylene rocking bands between 850 and 700 cm^?1 were observed to be sequence dependent with ? V(E)_xV? resonanting at 860, 750, or 730 cm^?1 for x = 0, 1 and 2, or ≥3, respectively. The C? Cl stretching resonances, which are well known for their conformational complexity in pure PVC, were found to be dominated by sequence length effects reducing to two bands at 665 and 610 cm^?1 characteristic of and isolated ? CH? Cl unit in a long methylene chain.     

13C-NMR study of chlorinated ethylene–vinyl acetate copolymers

¹³C-NMR has been used to analyze the microstructures of a series of experimental chlorinated ethylene–vinyl acetate copolymers (15–56% CI). Previously established line assignments for EVA copolymers and substituent effect parameters for chlorine have enabled us to tentatively assign partial structures up to five carbon atoms in length. The ¹³C-NMR analyses of a commercial vinyl chloride–vinyl acetate copolymer, a commercial vinyl chloride–vinyl acetate–ethylene terpolymer, and a commercial chlorinated polyethylene support the structural assignments. Data obtained for the experimental resins indicate that the acetate groups influence the way in which chlorine is added to the polymer chain. furthermore, the data indicate the acetate groups undergo little, if any, chlorination.     

Quasiliving Carbocationic Polymerization. IX. Forced Ideal Copolymerization of Styrene Derivatives

Forced ideal carbocationic copolymerization of α-methylstyrene (αMeSt) with p-tert-butylstyrene (ptBuSt) and (αMeSt) with styrene (St) has been achieved by continuous monomer feed addition to a cumyl chloride/BCl₃ charge at -50°C by keeping the feeding rate of the monomer mixtures equal to the overall rate of copolymerization, The composition of the copolymers was identical to the composition of the monomer feeds over the entire concentration range. A quantitative expression has been derived to show that under forced ideal copolymerization conditions the composition of the copolymer can be controlled by the composition of the feed. Further, conditions have been found for forced ideal quasiliving copolymerizations, i.e., the number-average molecular weight of the copolymers increased almost linearly with the cumulative weight of consumed monomers by the use of suitably slow, continuous feed addition in the presence of relatively nonpolar solvent mixtures (60/40 v/v n-hexane + methylene chloride). In polar solvent (methylene chloride) the molecular weight increase was less pronounced due to chain transfer to monomer involving indane-skeleton formation; however, with charges containing large amounts of ptBuSt the molecular weight increase was surprisingly strong. Interestingly, ptBuSt does not homopolymerize in 60/40 v/v n-hexane/methylene chloride but it readily copolymerizes with αMeSt. This observation was explained by examining the relative rates of terminations of the cationic species involved. Conditions have been found for the pronounced quasiliving polymerization of St. In forced ideal quasiliving copolymerizations neither the molecular weights of αMeSt/ptBuSt or αMeSt/St copolymers nor the initiating efficiencies of the initiating systems used show a depression. The microstructure of representative αMeSt/ptBuSt copolymers obtained under forced ideal quasiliving conditions has been analyzed by ¹³C-NMR spectroscopy. According to these studies, true copolymers have formed and resonance peaks for various triads have been deduced.     

Effect on structural relaxation of the poly(methyl‐methacrylate) copolymers chain flexibility

The structural relaxation of poly(methyl‐methacrylate) (PMMA)‐based copolymers with different chain flexibility has been studied by DSC with the classical procedure of the isothermal and dynamical approach. Modified PMMA with different chain flexibility have been prepared by free radical polymerization in solution using a mixture of monomers containing 10 mol % of alkyl methacrylate (i.e., ethyl, buthyl, and hexyl methacrylate). The molecular characteristics of all the prepared copolymers have been performed by a multiangle laser light scattering (MALS) photometer on‐line to a size exclusion chromatography (SEC) system (SEC‐MALS) after and before the thermal treatments, NMR (¹H and ¹³C) and MALDI‐TOF mass spectrometry. A comparison of the apparent relaxation rate (R_H) was appraised from the enthalpy loss by annealing the different samples at the same level of undercooling (T_a = T_g ? 18 °C). It was found an increase of R_H increasing the chain flexibility in the copolymers. Dynamical tests, performed at different cooling rates, have been used to estimate the apparent activation energy of the relaxation process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 596–607, 2009     

Quasiliving Carbocationic Polymerization. XII. Forced Ideal Copolymerization of lsobutylene with Styrene

Forced ideal carbocationic copolymerization of isobutylene/styrene systems has been achieved by continuous addition of mixed monomer feeds to 2-chloro-2,4,4-trimethylpentane/TiCl₄ in n-hexane/methylene chloride charge by keeping the input rate equal to the overall rate of copolymerization. The composition of the copolymers was identical to that of the feeds over the entire monomer concentration range. The number-average molecular weight of the copolymers increased almost linearly with the amount of consumed monomers at higher isobutylene concentrations in the feed. The molecular weight increase was less pronounced at higher styrene concentration because more methylene chloride had to be used in the solvent system to keep the copolymer in solution. The micro-structure of the copolymers is uniform as determined by gel permeation chromatography (UV plus RI) and ¹³C-NMR spectroscopy According to these studies, true copolymers have formed. The probability of triads in the copolymer has been determined.     

Effect of solvent nature on free-radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride and maleic acid

The free-radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid in DMSO proceeds to yield statistical copolymers. When the reaction is carried out in methanol, the copolymers of constant compositions (N,N-diallyl-N,N-dimethylammonium chloride: maleic acid = 2: 1) are formed over a wide range of comonomer ratios in the starting mixture. The formation of alternating copolymers in this case may be attributed to formation of donor-acceptor complexes between the comonomers in the methanol solution, as evidenced by UV spectrophotometry. The kinetic features of the process have been investigated, and the relative activities of the monomers have been assessed. ¹³C NMR studies have demonstrated that, regardless of the solvent nature, both double bonds of N,N-diallyl-N,N-dimethylammonium chloride are involved in copolymerization via intermolecular cyclization accompanied by formation of pyrrolidinium structures.     

Quasiliving Carbocationic Polymerization. XV. Forced Ideal Copolymerization of Isobutylene-lsoprene

Forced ideal carbocationic copolymerization of isobutylene and isoprene has been achieved by continuous addition of monomer mixtures of different compositions to cumyl chloride/TiCl₄ charges at -50°C. The overall rate of copolymerization could be kept equal to that of addition rate with up to 10 mol% isoprene in the mixed monomer feed. In this monomer concentration range the composition of the copolymer was identical to that of the feeds. At higher diene concentrations in the feed, chain transfer to monomer and other side reactions (intramolecular cyclization, gel formation) could not be completely avoided. The number-average molecular weight of the copolymers increased almost linearly with the amount of consumed monomers at 10 mol% isoprene concentrations in the feed (i.e., in the quasiliving range). According to ¹H-NMR and ¹³C-NMR spectroscopy, the products are random copolymers.     

On the ethylene-norbornene copolymerization mechanism

Results of our studies on polymerization kinetics and tests of copolymerization statistical models of ethylene-norbornene (E-N) copolymers obtained on the basis of microstructures determined by ¹³C NMR analysis are reported. Ethylene-norbornene (E-N) copolymers were synthesized by catalytic systems composed of racemic isospecific metallocenes, i-Pr[(3Prⁱ-Cp)(Flu)]ZrCl₂ or a constrained geometry catalyst (CGC) and methylaluminoxane. Polymerization kinetics revealed that E-N copolymerization is quasi living under standard polymerization conditions. Calculations of the number of active sites and of chain propagation and chain transfer turnover frequencies indicate that the metal is mainly in the Mt-N* state, while the Mt-E* state contributes more to transfer and propagation rates. The first-order and the second-order Markov statistics have been tested by using the complete tetrad distribution obtained from ¹³C NMR analysis of copolymer microstructures. The root-mean-square deviations between experimental and calculated tetrads demonstrate that penultimate (second-order Markov) effects play a decisive role in E-N copolymerizations. Results show clues for more complex effects depending on the catalyst geometry in copolymers obtained at high N/E feed ratios. Comonomer concentration was shown to have a strong influence on copolymer microstructure and copolymer properties. The copolymer microstructure of alternating isotactic copolymers obtained with i-Pr[(3Prⁱ-Cp)(Flu)]ZrCl₂ have been described at pentad level. Second-order Markov statistics better describes also the microstrucure of these copolymers.     

Thermal degradation of copolymers of 36Cl-vinyl chloride and methyl methacrylate

The degradation of copolymers of vinyl ³⁶Cl-chloride and methyl methacrylate has been studied using film samples, slow heating rate and high vacuum conditions. Volatilization has been followed using thermal volatilization analysis and radioactive assay of methyl chloride and hydrogen chloride. By carrying out duplicate experiments with and without an ice trap at ? 100°, it is possible to measure methyl chloride alone and both products, respectively, so that each product can be estimated. Yields have been found to agree well with those predicted from sequence distribution calculations. Some differences in behaviour compared with earlier work using powder samples and nitrogen flow conditions are discussed.     

SYNTHESIS AND CHARACTERIZATION OF AMPHIPHILIC GRAFT COPOLYMER CONTAINING MICROPHASE SEPARATED AND LONG POLY(ETHYLENE OXIDE) SIDE CHAIN STRUCTURES**

Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called "selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed "comb- model" was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.     

Activity of diallylamido-bis(diethylamido)guanidinium chloride in radical polymerization reactions

The activity of diallylamido-bis(diethylamido)guanidinium chloride in radical polymerization and copolymerization with vinyl monomers giving rise to random copolymers has been studied. A lower activity of diallylamido-bis(diethylamido)guanidinium chloride than that of vinyl monomers has been demonstrated. It has been shown that this monomer readily copolymerizes with sulfur dioxide and alternating copolymers of equimolar composition are formed regardless of the comonomer ratio in the initial mixture and the reaction conditions (the nature of solvent and initiator, temperature, and conversion). The structure of polymers has been studied by ¹³C NMR spectroscopy.     

Living bimetallic initiators for the preparation of triblock copolymers

The compound [(η-C₃H₅)Ni(OC(O)CF₃)]₂ ( I ), which has been used extensively as a butadiene polymerization catalyst and more recently as an isocyanide polymerization catalyst, has been successfully used in the preparation of polyisocyanide - polybutadiene block copolymers. Since both monomer polymerizations are living, this block copolymer synthesis is highly versatile with respect to polymer segment chain lengths and the types of monomers used. Because non-reciprocal end-group activities prevent the preparation of triblock copolymers of the type polyisocyanide-butadiene-polyisocyanide, bimetallic initiators possessing two allylnickel moieties linked through a central core have been prepared and used to synthesize these desirable triblock copolymers. These materials have been characterized by using gel-permeation chromatography, differential scanning calorimetry, ¹³C NMR and scanning electron microscopy.     

Living polymerization of styrene initiated by mercaptan/ε‐caprolactam

The bulk polymerization of styrene initiated by ?‐caprolactam (CL) and n‐dodecyl mercaptan (RSH) has been explored. This novel polymerization system shows living characteristics. For example, the molecular weight of the resulting polymers increases with conversion, and the system has the ability to form diblock copolymers and so forth. The polymer chain end contains thiol and lactam structures, which we have investigated with Fourier transform infrared, ¹H NMR, and ¹³C NMR techniques. Electron spin resonance spectra and theoretical calculations by the Hartree–Fock methods have been used to examine the mechanism. The results reveal that the initial polymerization starts from thiol via a chain‐transfer reaction, and the propagation proceeds by the insertion of a monomer between the terminal group and the intermediate structure of lactam. Finally, the polymerization kinetics have been examined. The polymerization rate varies linearly with the concentration of CL and RSH, and this confirms the mechanism. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4976–4993, 2004     

Cationic polymerizations by aromatic initiating systems. V. Oxidation and chlorination of α,ω-diphenylpolyisobutylene and subsequent reaction with living polystyrene anions to form block copolymers

α,ω-Diphenylpolyisobutylenes produced by the Cl^t-R-Cl^t/ø₃Al initiating system have been derivatized. Model chloromethylation of t-butylbenzene by CH₃OCH₂Cl in chloroform indicated that beyond ca. 35% yield significant alkylative side reactions occurred. Phenyl end groups (average 1.5 per chain) and unsaturated chain ends (from proton elimination) have been converted to carboxyl end groups by oxidation with RuO₄ in chloroform. Subsequently the carboxyl end groups were converted to acyl chloride termini by reaction with SOCl₂. The latter end groups were coupled with living polystyryl anions to form isobutylene-styrene blcok copolymers.     

13C-NMR study of arylene–ether–ketone copolymers

The chemical microstructure of arylene–ether–ketone copolymers of terephthaloyl chloride (TCl), 1,4-diphenoxybenzene (DPB), and diphenyl ether (DPE) has been characterized by ¹³C-NMR. Copolymers synthesized via two Friedel–Crafts reaction have been investigated; the first reaction uses HF and BF₃ to catalyze polymerization, and the second uses LiCl to moderate the activity of the Lewis-acid catalyst, AlCl₃. The HF/BF₃ approach results in random copolymers, in which the TCI displays no preference in reacting with either DPB or DPE. The buffered AlCl₃ approach yields somewhat blocky copolymers, in which the DPB and DPE tend to segregate. The degree of segregation in these materials has been quantified by formulas for the number-average block lengths.     

Benzo-12-crown-4 modified N-heterocyclic carbene for organocatalyst: Synthesis,characterization and degradation of block copolymers of ϵ-caprolactone with L-lactide

A set of poly(L-lactide)-poly(?-caprolactone) diblock copolymers (AB) and poly(L-lactide)-poly(?-caprolactone)-poly(L-lactide) triblock copolymers (ABA) with predictable molecular weights and relatively narrow distributions were synthesized by ring-opening polymerization of successively added ?-caprolactone (?-CL) and L-lactide (LLA) using 4-methyl benzo-12-crown-4 imidazol-2-ylidene as catalyst. The effects of polymerization conditions, such as reaction time, temperature, monomer/catalyst molar ratio and monomer concentration on the copolymerization have been discussed in detail. The resulting copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, GPC and DSC methods which confirmed the successful synthesis of block copolymers of LLA and ?-CL. Hydrolytic degradation of the polymers showed that the PLLA-PCL-PLLA copolymer exhibited faster degradation as compared with the PCL homopolymer in alkaline medium at 37°C.     

13C-{1H} NMR spectra of episulphide copolymers

Ethylene sulphide-isobutylene sulphide and propylene sulphide-isobutylene sulphide copolymers have been prepared using anionic catalysts and investigated by ¹³C-{¹H} NMR spectroscopy. The carbon-13 NMR spectra are assigned in terms of diad and triad sequences. There is discussion of the effects of mono- or dimethyl substitution in the α, β, γ or δ positions on the chemical shift of the main chain carbon atoms. It has also been shown that for isobutylene sulphide, as for propylene sulphide, under the influence of an anionic catalyst, there is a normal ring opening only at the primary carbon atom.     

Random-coil dimensions and dipole moments of propylene–vinyl chloride copolymers

Mean-square unperturbed dimensions 〈r²〉₀ and dipole moments 〈μ²〉 have been calculated for propylene–vinyl chloride copolymers by means of rotational isomeric state theory. The calculations indicate that for these chain molecules 〈mu;²〉 is much more sensitive to chemical sequence distribution than is 〈r²〉₀, a conclusion in agreement with results of previous studies of ethylene–propylene copolymers and styrene-substituted styrene copolymers. In the case of propylene–vinyl chloride chains, both 〈r²〉₀ and 〈μ²〉 are most strongly dependent on chemical sequence distribution in the case of copolymers which are significantly syndiotactic in stereochemical structure. At equimolar chemical composition, increase in average chemical sequence length generally increases 〈r²〉₀ but decreases 〈μ²〉. Under some conditions, values of these statistical properties go through a minimum with increase in the reactivity ratio product r₁r₂, thus complicating the use of experimental values of these properties in the characterization of chemical sequence distributions in these copolymers.     

Synthesis of poly(vinylene arsine)s through the ring‐collapsed radical alternating copolymerization of an organoarsenic homocycle with aliphatic acetylenes and their properties

Poly(vinylene arsine)s with no aromatic substituent ([? CH?CR? AsMe? ]_n) were prepared through a radical alternating copolymerization of acetylenic compounds having an alkyl substituent with an organoarsenic homocycle as an arsenic‐atomic biradical equivalent. The radical reaction between 1‐octyne and pentamethylcyclopentaarsine, with a catalytic amount of 2,2′‐azobisisobutyronitrile without a solvent (60 °C, 10 h), produced the corresponding poly(vinylene arsine)s (45% yield). The copolymers obtained were soluble in tetrahydrofuran, chloroform, hexane, and so on. The copolymers were characterized with ¹H and ¹³C NMR spectra. The number‐average molecular weights of the copolymers were estimated with gel permeation chromatography (chloroform and polystyrene standards) to be 6500. The copolymers showed an emission property attributable to the n–π* transition in the main chain. Irradiation by an incandescent lamp of a mixture of 1‐octyne and 1 also produced poly(vinylene arsine)s. The conversion rate of 1‐octyne during the copolymerization with 2,2′‐azobisisobutyronitrile was measured with gas chromatography analysis and was found to be much slower than that of phenylacetylene. A radical terpolymerization of cyclo‐(AsMe)₅ with 1‐octyne and styrene was carried out to yield the terpolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3604–3611, 2004     

Block copolymers derived from azobiscyanopentanoic acid. IV. Synthesis of a polyamide–polystyrene block copolymer

Polyamides 6.10 and 6.6 (PA^* 6.10 and 6.6) containing small amounts of ? N?N? units in the main chains were prepared by interfacial polycondensation between hexamethylenediamine and sebacoyl chloride or adipoyl chloride with addition of azobiscyanopentanoyl chloride. Polyamide–polystyrene block copolymers (PA-b-PSt) were then prepared by decomposition of the ? N?N? units of PA^*, initiating radical polymerization of styrene in m-cresol. The average PA block length of PA-b-PSt thus formed was longer than that expected from the initially present PA segments between the ? N?N? units. This is probably due to recombination of PA radicals whose initiation efficiency is as low as 15%. The PSt blocks also had higher molecular weight (7000–79,000) in comparison with homopolystyrene produced from monomeric azobiscyanopentanoic acid used as an initiator due to higher viscosity of polymerization system. Variation of intrinsic viscosity and turbidimetric titration behavior along with the change in composition were also discussed.