Adsorption and thermal reaction of short-chain alkanethiols on GaAs(1 0 0)

By means of temperature-programmed desorption (TPD) and X-ray photoemission spectroscopy (XPS) with synchrotron radiation, we investigated the adsorption and thermal decomposition of alkanethiols (RSH, R = CH₃, C₂H₅, and C₄H₉) on a GaAs(1 0 0) surface. All chemisorbed alkanethiols can deprotonate to form thiolates below 300 K via dissociation of the sulfhydryl hydrogen (-SH). Two types of thiolates species are observed on GaAs(1 0 0), according to adsorption on surface Ga and As sites. The thiolates adsorbed on a Ga site preferentially recombine with surface hydrogen to desorb as a molecular thiol at 350-385 K. The thiolate on the As site exhibits greater thermal stability and undergoes mainly dissociation of the C-S bond at ∼520 K, independent of the alkyl chain length. The decomposition of CH₃S either directly desorbs CH₃ or transfers the CH₃ moiety onto the surface. The surface CH₃ further evolves directly from the surface at 665 K. The dissociations of C₂H₅S and C₄H₉S yield surface C₂H₅ and C₄H₉, which further decompose to desorb C₂H₄ and C₄H₈, respectively, via β-hydride elimination. The complete decomposition of alkanethiol leads to the formation of surface S without deposition of carbon. Adsorption of CH₃SSCH₃ results in the formation of surface CH₃S at initial exposures via scission of the S−S bond. Compared with the adsorption of CH₃SH, the CH₃S on the Ga site exhibits greater thermal stability because surface hydrogen is absent. At a high exposure, CH₃SSCH₃ can absorb molecularly on the surface and decompose to desorb CH₃SCH₃ via formation of a CH₃SS intermediate.     

The dehydrogenation of CH4 on Rh(1 1 1), Rh(1 1 0) and Rh(1 0 0) surfaces: A density functional theory study

CH₄ dehydrogenation on Rh(1 1 1), Rh(1 1 0) and Rh(1 0 0) surfaces has been investigated by using density functional theory (DFT) slab calculations. On the basis of energy analysis, the preferred adsorption sites of CH_x (x = 0-4) and H species on Rh(1 1 1), Rh(1 1 0) and Rh(1 0 0) surfaces are located, respectively. Then, the stable co-adsorption configurations of CH_x (x = 0-3) and H are obtained. Further, the kinetic results of CH₄ dehydrogenation show that on Rh(1 1 1) and Rh(1 0 0) surfaces, CH is the most abundant species for CH₄ dissociation; on Rh(1 1 0) surface, CH₂ is the most abundant species, our results suggest that Rh catalyst can resist the carbon deposition in the CH₄ dehydrogenation. Finally, results of thermodynamic and kinetic show that CH₄ dehydrogenation on Rh(1 0 0) surface is the most preferable reaction pathway in comparison with that on Rh(1 1 1) and Rh(1 1 0) surfaces.     

Etching reaction of methylchloride molecule on the GaAs (0 0 1)-2 × 4 surface

Adsorption process of methylchloride (CH₃Cl) on the GaAs (0 0 1)-2 × 4 surface was studied by a scanning tunnelling microscopy (STM) measurement. The arsenic rich 2 × 4 surface, which was prepared by molecular beam epitaxy (MBE), was exposed to a supersonic molecular beam of CH₃Cl with a kinetic energy of 0.06 eV. New bright spots appeared on the CH₃Cl exposed surface. They were largely observed at the “B-type” step edge and divided into two types according to their locations. It was suggested that new spots were due to weakly adsorbed CH₃Cl molecules without any dissociation. The adsorption mechanism of CH₃Cl molecule was also studied by an ab initio Hartree-Fock calculation, which explained the experimental results well.     

Study of S ion-assisted sulfurization of n-GaAs (1 0 0) surface

The chemical structure and site location of sulfur atoms on n-GaAs (1 0 0) surface treated by bombardment of S⁺ ions over their energy range from 10 to 100 eV have been studied by X-ray photoelectron spectroscopy and low energy electron diffraction. The formation of Ga-S and As-S species on the S⁺ ion bombarded n-GaAs surface is observed. An apparent donor doping effect is observed for the n-GaAs by the 100 eV S⁺ ion bombardment. It is found that the S⁺ ions with higher energy are more effective in the formation of Ga-S species, which assists the n-GaAs (1 0 0) surface in reconstruction into an ordered (1 × 1) structure upon subsequent annealing. The treatment is further extended to repair Ar⁺ ion damaged n-GaAs (1 0 0) surface. It is found that after a n-GaAs (1 0 0) sample is damaged by 150 eV Ar⁺ ion bombardment, and followed by 50 eV S⁺ ion treatment and subsequent annealing process, finally an (1 × 1) ordering GaAs (1 0 0) surface with low surface states is obtained.     

Surface reactions of 2-iodopropane on GaAs(1 0 0)

The surface reactions of 2-iodopropane ((CH₃)₂CHI) on gallium-rich GaAs(1 0 0)-(4 × 1), was studied by temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). CH₃CHICH₃ adsorbs molecularly at 120 K but dissociates below room temperature to form chemisorbed 2-propyl ((CH₃)₂CH) and iodide (I) species. Thermal activation causes desorption of the molecular species at 240 K, and this occurs in competition with the further reactions of the (CH₃)₂CH and I chemisorbed species. Self-coupling of the (CH₃)₂CH results in the formation of 2,3-dimethylbutane ((CH₃)₂CH-CH(CH₃)₂) at 290 K. β-Hydride elimination in (CH₃)₂CH yields gaseous propene (CH₃CHCH₂) at 550 K while reductive elimination reactions of (CH₃)₂CH with surface hydrogen yields propane (CH₃CH₂CH₃) at 560 K. Recombinative desorption of the adsorbed hydrogen as H₂ also occurs at 560 K. We observe that the activation barrier to carbon-carbon bond formation with 2-propyls on GaAs(1 0 0) is much lower than that in our previous investigations involving ethyl and 1,1,1-trifluoroethyl species where the β-elimination process was more facile. The difference in the surface chemistry in the case of 2-propyl species is attributable to its rigid structure resulting from the bonding to the surface via the second carbon atom, which causes the methyl groups to be further away from the surface than in the case of linear ethyl and 1,1,1-trifluoroethyl species. The β-hydride and reductive elimination processes in the adsorbed 2-propyl species thus occurs at higher temperatures, and a consequence of this is that GaI desorption, which is expected to occur in the temperature range 550-560 K becomes suppressed, and the chemisorbed iodine leaves the surface as atomic iodine.     

Characterisation of alkyl-functionalised Si(1 1 1) using reflectometry and AC impedance spectroscopy

The past few years have seen a dramatic increase in the study of organic thin-film systems that are based on silicon-carbon covalent bonds for bio-passivation or bio-sensing applications. This approach to functionalizing Si wafers is in contrast to gold-thiol or siloxane chemistries and has been shown to lead to densely packed alkyl monolayers. In this study, a series of alkyl monolayers [CH₃(CH₂)_nCH=CH₂; n = 7, 9, 11, 13, 15] were directly covalent-linked to Si(1 1 1) wafers. The structures of these monolayers were studied using X-ray reflectometry (XRR) and AC impedance spectroscopy. Both techniques are sensitive to the variation in thickness with each addition of a CH₂ unit and thus provide a useful means for monitoring molecular-scale events. The combination of these techniques is able to probe not only the thickness, but also the interfacial roughness and capacitance of the layer at the immobilized surface with atomic resolution. Fundamental physical properties of these films such as chain canting angles were also determined.     

XPS, electric and photoluminescence-based analysis of the GaAs (1 0 0) nitridation

In this paper, nitridation process of GaAs (1 0 0) substrates was studied in-situ using X-ray photoelectron spectroscopy (XPS) and ex-situ by means of electrical method I-V and photoluminescence surface state spectroscopy (PLS³) in order to determine chemical, electrical and electronic properties of the elaborated GaN/GaAs interfaces.The elaborated structures were characterised by I-V analysis. The saturation current I_S, the ideality factor n, the barrier height Φ_Bn and the serial resistance R_S are determined.The elaborated GaN/GaAs structures are also exhibited a high PL intensity at room temperature. From the computer-aided analysis of the power-dependent PL efficiency measurements (PLS³ technique), the value of the interface state density N_SS(E) close to the mid-gap was estimated to be in the range of 2-4 × 10¹¹ eV⁻¹ cm⁻², indicating a good electronic quality of the obtained interfaces.Correlation among chemical, electronic and electrical properties of the GaN/GaAs interface was discussed.     

Hydrogen adsorption on GaAs(0 0 1)-c(4 × 4)

Exposure of the As-terminated GaAs(0 0 1)-c(4 × 4) reconstructed surface to atomic hydrogen (H) at different substrate temperatures (50-480 °C) has been studied by reflection high-energy electron diffraction (RHEED) and scanning tunnelling microscopy (STM). Hydrogen exposure at low temperatures (∼50 °C) produces a disordered (1 × 1) surface covered with AsH_x clusters. At higher temperatures (150-400 °C) exposure to hydrogen leads to the formation of mixed c(2 × 2) and c(4 × 2) surface domains with H adsorbed on surface Ga atoms that are exposed due to the H induced loss of As from the surface. At the highest temperature (480 °C) a disordered (2 × 4) reconstruction is formed due to thermal desorption of As from the surface. The results are consistent with the loss of As from the surface, either through direct thermal desorption or as a result of the desorption of volatile compounds which form after reaction with H.     

A first-principles surface phase diagram study for Si-adsorption processes on GaAs(1 1 1)A surfaces

The adsorption processes of an Si atom on GaAs(1 1 1)A surfaces under growth conditions are investigated on the basis of first-principles surface phase diagrams, in which adsorption-desorption behavior is described by comparing the calculated adsorption energy obtained by total-energy electronic-structure calculations with vapor-phase chemical potential estimated by quantum statistical mechanics. The calculated surface phase diagram as functions of temperature and As₂ pressure demonstrates that both Ga and As atoms are adsorbed on the Ga-vacancy site of GaAs(1 1 1)A-(2×2) surface under low As-pressure conditions, resulting in the formation of (2×2) surface with an As adatom. The surface phase diagrams as functions of temperature and Si pressure also reveal that an Si atom can be adsorbed on the (2×2) surface with an As adatom for temperatures less than ∼1160 K and this Si atom can occupy one of As-lattice sites after the incorporation of another As atom, leading to p-type conductivity. In contrast, the (2×2) surface with an As trimer is found to be stabilized under high As-pressure conditions. The surface phase diagram for Si incorporation clarify that an Si atom can be adsorbed at one of Ga-lattice sites of the (2×2) surface with an As trimer for temperatures less than ∼870 K. These calculated results provide one of possible explanations for the formation of p-type and n-type GaAs on GaAs(1 1 1)A surfaces under low and high As-pressure conditions, respectively.     

Thermal reactions of 2-iodoethanol on Cu(1 0 0)

Temperature-programmed reaction/desorption, X-ray photoelectron spectroscopy, and reflection-absorption infrared spectroscopy have been employed to investigate the reactions of ICH₂CH₂OH on Cu(1 0 0) under ultrahigh-vacuum conditions. ICH₂CH₂OH can dissociate on Cu(1 0 0) at 100 K, forming a -CH₂CH₂OH surface intermediate. Density functional theory calculations predict that the -CH₂CH₂OH is most probably adsorbed on atop site. -CH₂CH₂OH on Cu(1 0 0) further decomposes to yield C₂H₄ below 270 K. No evidence shows the formation of -CH₂CH₂O- intermediate in the reactions of ICH₂CH₂OH on Cu(1 0 0) in contrast to the decomposition of BrCH₂CH₂OH on Cu(1 0 0) and ICH₂CH₂OH on Ag(1 1 1) and Ag(1 1 0), exhibiting the effects of carbon-halogen bonds and metal surfaces.     

The CuGaSe2(0 0 1) surface: A (4 × 1) reconstruction

We report on the formation of a stable (4 × 1) reconstruction of the chalcopyrite CuGaSe₂(0 0 1) surface. Using Ar⁺ ion-bombardment and annealing of epitaxial CuGaSe₂ films grown on GaAs(0 0 1) substrates it was possible to obtain flat, well-ordered surfaces showing a clear (4 × 1) reconstruction. The cleanliness and structure were analyzed in situ by AES and LEED. AES data suggest a slight Se-enrichment and Cu-depletion upon surface preparation. Our results demonstrate that (0 0 1) surfaces of the Cu-III-VI₂(0 0 1) material can show stable, unfacetted surfaces.     

Facetting and (n × 1) reconstructions of SrTiO3(1 1 0) surfaces

(n × 1) reconstructions and facetting of the (1 1 0) polar surface of SrTiO₃ are studied by means of a combination of shell model and density functional calculations. The polarity compensation can be achieved through the formation of {1 0 0} nano-facets, which play a crucial role in the reconstruction process. The behaviors of various possible terminations (Sr, Ti, and O) are analyzed, as well as their atomic structure and energetics. Their stability in different chemical environments is discussed, with respect to previous formulations and experimental results. The Sr-terminated surface tends to expose large facets, while the TiO and O terminations are marginally stabilized or even destabilized by (n × 1) reconstructions, respectively. Trend to facetting results from a subtle competition between the thermodynamic stability of the ideal non stoichiometric (n × 1) surfaces, and huge atomic relaxations that contribute to the lowering of the surface energy differently for each termination.     

Ruthenium adsorption and diffusion on the GaN(0 0 0 1) surface

We report first principles calculations to analyze the ruthenium adsorption and diffusion on GaN(0 0 0 1) surface in a 2×2geometry. The calculations were performed using the generalized gradient approximation (GGA) with ultrasoft pseudopotential within the density functional theory (DFT). The surface is modeled using the repeated slabs approach. To study the most favorable ruthenium adsorption model we considered T₁, T₄ and H₃ special sites. We find that the most energetically favorable structure corresponds to the Ru- T₄ model or the ruthenium adatom located at the T₄ site, while the ruthenium adsorption on top of a gallium atom (T₁ position) is totally unfavorable. The ruthenium diffusion on surface shows an energy barrier of 0.612 eV. The resultant reconstruction of the ruthenium adsorption on GaN(0 0 0 1)- 2×2 surface presents a lateral relaxation of some hundredth of Å in the most stable site. The comparison of the density of states and band structure of the GaN(0 0 0 1) surface without ruthenium adatom and with ruthenium adatom is analyzed in detail.     

Adsorption of organic molecules by photochemical reaction on Cl:Si(1 1 1) and H:Si(1 1 1) evaluated by HREELS

The covalent attachment of alkyl groups to silicon surfaces, via carbon-silicon bond formation, has been attempted using gas-surface reactions starting from Cl-terminated Si(1 1 1) or H:Si(1 1 1) under ultraviolet light irradiation. The formation of Cl-terminated Si(1 1 1) and its resulting stability were examined prior to deposition of organic molecules. High-resolution electron energy loss spectroscopy (HREELS) was utilized for detecting surface-bound adsorbates. The detection of photo-deposited organic species on Cl:Si(1 1 1) from gas-phase CH₄ or CH₂CH₂ was not significant. On H:Si(1 1 1), it was evident that after the photoreaction with gas-phase C₂H₅Cl, C₂H₅ groups were chemically bonded to the surface Si atoms through single covalent bonds. The C₂H₅ groups were thermally stable at temperatures below 600 K. Alkyl monolayers prepared on silicon surfaces by dry process will lead to a new prospective technology of nanoscale fabrication and biochemical applications.     

Comparative study of the GaAs(1 0 0) surface cleaned by atomic hydrogen

In attempt to correlate electronic properties and chemical composition of atomic hydrogen cleaned GaAs(1 0 0) surface, high-resolution photoemission yield spectroscopy (PYS) combined with Auger electron spectroscopy (AES) and mass spectrometry has been used. Our room temperature investigation clearly shows that the variations of surface composition and the electronic properties of a space charge layer as a function of atomic hydrogen dose display three successive interaction stages. There exists a contamination etching stage which is observed up to around 250 L of atomic hydrogen dose followed by a transition stage and a degradation stage which is observed beyond 700 L of exposure. In the first stage, a linear shift in the surface Fermi level is observed towards the conduction band by 0.14 eV, in agreement to the observed restoration of the surface stoichiometry and contamination removal. The next stage is characterized by a drop in ionization energy and work function, which quantitatively agrees with the observed Ga-enrichment as well as the tail of the electronic states attributed to the breaking As-dimers. As a result of the strong hydrogenation, the interface Fermi level E_F − E_v has been pinned at the value of 0.75 eV what corresponds to the degradation stage of the GaAs(1 0 0) surface that exhibits metallic density of states associated with Ga_As antisites defects. The results are discussed quantitatively in terms of the surface molecule approach and compared to those obtained by other groups.     

Infrared guiding behavior in a 1 × N spatial soliton switch

The use of photorefractive spatial solitons in the field of telecommunication is attractive, because they enable the realization of a variety of all-optical switching and coupling devices. We suggest a new design for a switch with one input and N outputs for infrared light in the telecommunication range (1520-1630 nm). The important refractive index n₀ and its modulation Δn of our strontium-barium-niobate-crystal (SBN) in the infrared wavelength region is measured to be n₀ = 2.29 and Δn = 1.9 × 10⁻⁴. With these results the experimental observations show a good agreement to the theoretical predictions. The experimentally realization of a 1 × 8 switch demonstrates the potential of this technology.     

Optical properties of methane to 288 GPa at 300 K

Optical properties of solid methane (CH₄) were studied at high pressure and room temperature using a diamond anvil cell. Reflectivity and transmission measurements were used to measure the refractive index to 288 GPa. Fabry-Perot interferometery was used to measure the sample thickness to 172 GPa. This data was fitted to the derived expression of thickness vs. pressure that was then used to calculate the thickness to 288 GPa. This in turn was combined with optical absorption experiments to obtain the absorption coefficient and hence the extinction coefficient k^*. From combined reflection and absorption experiments the refractive index n=n_s+ik^* was obtained. The index of refraction and the ratio of molar refraction to molar volume showed a large increase between 208 and 288 GPa. This behavior indicated that a phase transformation of insulator-semiconductor might have occurred in solid CH₄ by 288 GPa.     

Morphology and optical properties of p-type porous GaAs(1 0 0) layers made by electrochemical etching

Porous GaAs layers were formed by electrochemical etching of p-type GaAs(1 0 0) substrates in HF solution. A surface characterization has been performed on p-type GaAs samples using X-ray photoelectron spectroscopy (XPS) technique in order to get information about the chemical composition, particularly on the surface contamination. According to the XPS spectra, the oxide layer on as-received porous GaAs substrates contains As₂O₃, As₂O₅ and Ga₂O₃. Large amount of oxygen is present at the surface before the surface cleaning.Compared to untreated GaAs surface, room temperature photoluminescence (PL) investigations of the porous layers reveal the presence of two PL bands: a PL peak at ∼871 nm and a “visible” PL peak at ∼650-680 nm. Both peak wavelengths and intensities varied from sample to sample depending on the treatment that the samples have undergone. The short PL wavelength at 650-680 nm of the porous layers is attributed to quantum confinement effects in GaAs nano-crystallites. The surface morphology of porous GaAs has been studied using atomic force microscopy (AFM). Nano-sized crystallites were observed on the porous GaAs surface. An estimation of the mean size of the GaAs nano-crystals obtained from effective mass theory and based on PL data was close to the lowest value obtained from the AFM results.     

A DFT periodic study of the vanadyl pyrophosphate (1 0 0) surface

The unique ability of the vanadyl pyrophosphate (1 0 0) surface to activate n-butane and then selectively oxidise the hydrocarbon to maleic anhydride was investigated using modern quantum chemical methods. Bulk (VO)₂P₂O₇, together with stoichiometric and phosphorus-enriched (1 0 0) surfaces, were analysed using periodic density functional theory calculations. Also simulated was surface ionic relaxation from bulk geometry, and surface hydration. Density of states (DOS) plots show that, whether stoichiometric or phosphorus-enriched, bulk terminated or relaxed, bare or hydrated, local covalent reactivity at the (1 0 0) surface is controlled by vanadium species. Terminal P-O oxygen species are the most nucleophilic surface oxygens, as indicated by their predominance of sub-vanadium high-lying valence band levels. A periodic treatment of (VO)₂P₂O₇(1 0 0) hence gives results qualitatively identical to those obtained from earlier cluster calculations. Simulation of surface ionic relaxation shows that in-plane P-O-V oxygens may also be involved in rupture of substrate C-H bonds for mild oxidation, while surface hydration calculations indicate that dissociative chemisorption of water may play a key role in perpetuation of the selective oxidation cycle.     

CH4 dissociation on NiCo (1 1 1) surface: A first-principles study

A density-functional theory method has been conducted to investigate the adsorption of CH_x (x = 0-4) as well as the dissociation of CH_x (x = 1-4) on (1 1 1) facets of ordered NiCo alloy. The results have been compared with those obtained on pure Ni (1 1 1) surface. It shows that the adsorption energies of C and CH are decreased while it is increased for CH₃ on NiCo (1 1 1) compared to those on pure Ni (1 1 1). Furthermore, on NiCo (1 1 1), dissociation of CH_x prefers not to the top of Ni, but to the top of Co. The rate-determining step for CH₄ dissociation is considered as the first step of dehydrogenation on NiCo (1 1 1), while it is the fourth step of dehydrogenation on Ni (1 1 1). Furthermore, the activation barrier in rate-determining step is slightly higher by 0.07 eV on Ni (1 1 1) than that on NiCo (1 1 1). From above results, it is important to point out that carbon is easy to form on NiCo (1 1 1) although the adsorption energy of C atom is slightly decreased compared to that on Ni (1 1 1).