CoN1O2 Single-Atom Catalyst for Efficient Peroxymonosulfate Activation and Selective Cobalt(IV)=O Generation

High-valent metal-oxo (HVMO) species are powerful non-radical reactive species that enhance advanced oxidation processes (AOPs) due to their long half-lives and high selectivity towards recalcitrant water pollutants with electron-donating groups. However, high-valent cobalt-oxo (Co^IV=O) generation is challenging in peroxymonosulfate (PMS)-based AOPs because the high 3d-orbital occupancy of cobalt would disfavor its binding with a terminal oxygen ligand. Herein, we propose a strategy to construct isolated Co sites with unique N₁O₂ coordination on the Mn₃O₄ surface. The asymmetric N₁O₂ configuration is able to accept electrons from the Co 3d-orbital, resulting in significant electronic delocalization at Co sites for promoted PMS adsorption, dissociation and subsequent generation of Co^IV=O species. CoN₁O₂/Mn₃O₄ exhibits high intrinsic activity in PMS activation and sulfamethoxazole (SMX) degradation, highly outperforming its counterpart with a CoO₃ configuration, carbon-based single-atom catalysts with CoN₄ configuration, and commercial cobalt oxides. Co^IV=O species effectively oxidize the target contaminants via oxygen atom transfer to produce low-toxicity intermediates. These findings could advance the mechanistic understanding of PMS activation at the molecular level and guide the rational design of efficient environmental catalysts.     

Intermediates-induced CO2 Reduction Reaction Activity at Single-Atom M−N2 (M=Fe,Co, Ni) Sites

Single-atom M−N₂ (M=Fe, Co, Ni) catalysts exhibit high activity for CO₂ reduction reaction (CO₂RR). However, the CO₂RR mechanism and the origin of activity at the single-atom sites remain unclear, which hinders the development of single-atom M−N₂ catalysts. Here, using density functional theory calculations, we reveal intermediates-induced CO₂RR activity at the single-atom M−N₂ sites. At the M−N₂ sites, the asymmetric *O*CO configuration tends to split into *CO and *OH intermediates. Intermediates become part of the active moiety to form M−(CO)N₂ or M-(OH)N₂ sites, which optimizes the adsorption of intermediates on the M sites. The maximum free energy differences along the optimal CO₂RR pathway are 0.30, 0.54, and 0.28 eV for Fe−(OH)N₂, Co−(CO)N₂, and Ni−(OH)N₂ sites respectively, which is lower than those of Fe−N₂ (1.03 eV), Co−N₂ (1.24 eV) and Ni−N₂ (0.73 eV) sites. The intermediate modification can shift the d-band center of the spin-up (minority) state downward by regulating the charge distribution at the M sites, leading to less charge being accepted by the intermediates from the M sites. This work provides new insights into the understanding of the activity of single-atom M−N₂ sites.     

Uncovering Dynamic Edge-Sites in Atomic Co−N−C Electrocatalyst for Selective Hydrogen Peroxide Production

Understanding the nature of single-atom catalytic sites and identifying their spectroscopic fingerprints are essential prerequisites for the rational design of target catalysts. Here, we apply correlated in situ X-ray absorption and infrared spectroscopy to probe the edge-site-specific chemistry of Co−N−C electrocatalyst during the oxygen reduction reaction (ORR) operation. The unique edge-hosted architecture affords single-atom Co site remarkable structural flexibility with adapted dynamic oxo adsorption and valence state shuttling between Co^(2−δ)+ and Co²⁺, in contrast to the rigid in-plane embedded Co₁−N_x counterpart. Theoretical calculations demonstrate that the synergistic interplay of in situ reconstructed Co₁−N₂-oxo with peripheral oxygen groups gives a rise to the near-optimal adsorption of *OOH intermediate and substantially increases the activation barrier for its dissociation, accounting for a robust acidic ORR activity and 2e⁻ selectivity for H₂O₂ production.     

Turning the Inert Element Zinc into an Active Single-Atom Catalyst for Efficient Fenton-Like Chemistry

Amongst various Fenton-like single-atom catalysts (SACs), the zinc (Zn)-related SACs have been barely reported due to the fully occupied 3d¹⁰ configuration of Zn²⁺ being inactive for the Fenton-like reaction. Herein, the inert element Zn is turned into an active single-atom catalyst (SA−Zn−NC) for Fenton-like chemistry by forming an atomic Zn−N₄ coordination structure. The SA−Zn−NC shows admirable Fenton-like activity in organic pollutant remediation, including self-oxidation and catalytic degradation by superoxide radical (O₂⋅⁻) and singlet oxygen (¹O₂). Experimental and theoretical results unveiled that the single-atomic Zn−N₄ site with electron acquisition can transfer electrons donated by electron-rich pollutants and low-concentration PMS toward dissolved oxygen (DO) to actuate DO reduction into O₂⋅⁻ and successive conversion into ¹O₂. This work inspires an exploration of efficient and stable Fenton-like SACs for sustainable and resource-saving environmental applications.     

Enhanced Interfacial Electron Transfer by Asymmetric Cu-Ov-In Sites on In2O3 for Efficient Peroxymonosulfate Activation

Enhancing the peroxymonosulfate (PMS) activation efficiency to generate more radicals is vital to promote the Fenton-like reaction activity, however, how to promote the PMS adsorption and accelerate the interfacial electron transfer to boost its activation kinetics remains a great challenge. Herein, we prepared Cu-doped defect-rich In₂O₃ (Cu-In₂O₃/O_v) catalysts containing asymmetric Cu−O_v−In sites for PMS activation in water purification. The intrinsic catalytic activity is that the side-on adsorption configuration of the O−O bond (Cu−O−O−In) at the Cu-O_v-In sites significantly stretches the O−O bond length. Meanwhile, the Cu-O_v-In sites increase the electron density near the Fermi energy level, promoting more and faster electron transfer to the O−O bond for generating more SO₄⋅⁻ and ⋅OH. The degradation rate constant of tetracycline achieved by Cu-In₂O₃/O_v is 31.8 times faster than In₂O₃/O_v, and it shows the possibility of membrane reactor for practical wastewater treatment.     

Revealing Isolated M−N3C1 Active Sites for Efficient Collaborative Oxygen Reduction Catalysis

Single atom catalysts (SACs) are of great importance for oxygen reduction, a critical process in renewable energy technologies. The catalytic performance of SACs largely depends on the structure of their active sites, but explorations of highly active structures for SAC active sites are still limited. Herein, we demonstrate a combined experimental and theoretical study of oxygen reduction catalysis on SACs, which incorporate M−N₃C₁ site structure, composed of atomically dispersed transition metals (e.g., Fe, Co, and Cu) in nitrogenated carbon nanosheets. The resulting SACs with M−N₃C₁ sites exhibited prominent oxygen reduction catalytic activities in both acidic and alkaline media, following the trend Fe−N₃C₁ > Co−N₃C₁ > Cu−N₃C₁. Theoretical calculations suggest the C atoms in these structures behave as collaborative adsorption sites to M atoms, thanks to interactions between the d/p orbitals of the M/C atoms in the M−N₃C₁ sites, enabling dual site oxygen reduction.     

Generation of FeIV=O and its Contribution to Fenton-Like Reactions on a Single-Atom Iron−N−C Catalyst

Generating Fe^IV=O on single-atom catalysts by Fenton-like reaction has been established for water treatment; however, the Fe^IV=O generation pathway and oxidation behavior remain obscure. Employing an Fe−N−C catalyst with a typical Fe−N₄ moiety to activate peroxymonosulfate (PMS), we demonstrate that generating Fe^IV=O is mediated by an Fe−N−C−PMS* complex—a well-recognized nonradical species for induction of electron-transfer oxidation—and we determined that adjacent Fe sites with a specific Fe₁−Fe₁ distance are required. After the Fe atoms with an Fe₁-Fe₁ distance <4 Å are PMS-saturated, Fe−N−C−PMS* formed on Fe sites with an Fe₁-Fe₁ distance of 4–5 Å can coordinate with the adjacent Fe^II−N₄, forming an inter-complex with enhanced charge transfer to produce Fe^IV=O. Fe^IV=O enables the Fenton-like system to efficiently oxidize various pollutants in a substrate-specific, pH-tolerant, and sustainable manner, where its prominent contribution manifests for pollutants with higher one-electron oxidation potential.     

Mn−O Covalency Governs the Intrinsic Activity of Co‐Mn Spinel Oxides for Boosted Peroxymonosulfate Activation

Transition metal (TM)‐based bimetallic spinel oxides can efficiently activate peroxymonosulfate (PMS) presumably attributed to enhanced electron transfer between TMs, but the existing model cannot fully explain the efficient TM redox cycling. Here, we discover a critical role of TM?O covalency in governing the intrinsic catalytic activity of Co_3?xMn_xO₄ spinel oxides. Experimental and theoretical analysis reveals that the Co sites significantly raises the Mn valence and enlarges Mn?O covalency in octahedral configuration, thereby lowering the charge transfer energy to favor Mn_Oh–PMS interaction. With appropriate Mn^IV/Mn^III ratio to balance PMS adsorption and Mn^IV reduction, the Co_1.1Mn_1.9O₄ exhibits remarkable catalytic activities for PMS activation and pollutant degradation, outperforming all the reported TM spinel oxides. The improved understandings on the origins of spinel oxides activity for PMS activation may inspire the development of more active and robust metal oxide catalysts.     

Efficient Removal of Antibiotic Resistance Genes through 4f-2p-3d Gradient Orbital Coupling Mediated Fenton-Like Redox Processes

Peroxymonosulfate (PMS) mediated radical and nonradical active substances can synergistically achieve the efficient elimination of antibiotic resistance genes (ARGs). However, enhancing interface electron cycling and optimizing the coupling of the oxygen-containing intermediates to improve PMS activation kinetics remains a major challenge. Here, Co doped CeVO₄ catalyst (Co−CVO) with asymmetric sites was constructed based on Ce 4f−O 2p−Co 3d gradient orbital coupling. The catalyst achieved approximately 2.51×10⁵ copies/mL of extracellular ARGs (eARGs) removal within 15 minutes, exhibited ultrahigh degradation rate (k=1.24 min⁻¹). The effective gradient 4f-2p-3d orbital coupling precisely regulates the electron distribution of Ce−O−Co active center microenvironment, while optimizing the electronic structure of Co 3d states (especially the occupancy of e_g), promoting the adsorption of oxygen-containing intermediates. The generated radical and nonradical generated by interfacial electron cycling enhanced by the reduction reaction of PMS at the Ce site and the oxidation reaction at the Co site achieved a significant mineralization rate of ARGs (83.4 %). The efficient removal of ARGs by a continuous flow reactor for 10 hours significantly reduces the ecological risk of ARGs in actual wastewater treatment.     

Single-Atom Zinc Sites with Synergetic Multiple Coordination Shells for Electrochemical H2O2 Production

Precise manipulation of the coordination environment of single-atom catalysts (SACs), particularly the simultaneous engineering of multiple coordination shells, is crucial to maximize their catalytic performance but remains challenging. Herein, we present a general two-step strategy to fabricate a series of hollow carbon-based SACs featuring asymmetric Zn−N₂O₂ moieties simultaneously modulated with S atoms in higher coordination shells of Zn centers (n≥2; designated as Zn−N₂O₂−S). Systematic analyses demonstrate that the synergetic effects between the N₂O₂ species in the first coordination shell and the S atoms in higher coordination shells lead to robust discrete Zn sites with the optimal electronic structure for selective O₂ reduction to H₂O₂. Remarkably, the Zn−N₂O₂ moiety with S atoms in the second coordination shell possesses a nearly ideal Gibbs free energy for the key OOH* intermediate, which favors the formation and desorption of OOH* on Zn sites for H₂O₂ generation. Consequently, the Zn−N₂O₂−S SAC exhibits impressive electrochemical H₂O₂ production performance with high selectivity of 96 %. Even at a high current density of 80 mA cm⁻² in the flow cell, it shows a high H₂O₂ production rate of 6.924 mol g_cat⁻¹ h⁻¹ with an average Faradaic efficiency of 93.1 %, and excellent durability over 65 h.     

Boosting the Proton-coupled Electron Transfer via Fe−P Atomic Pair for Enhanced Electrochemical CO2 Reduction

Single-atom catalysts exhibit superior CO₂-to-CO catalytic activity, but poor kinetics of proton-coupled electron transfer (PCET) steps still limit the overall performance toward the industrial scale. Here, we constructed a Fe−P atom paired catalyst onto nitrogen doped graphitic layer (Fe₁/PNG) to accelerate PCET step. Fe₁/PNG delivers an industrial CO current of 1 A with FE_CO over 90 % at 2.5 V in a membrane-electrode assembly, overperforming the CO current of Fe₁/NG by more than 300 %. We also decrypted the synergistic effects of the P atom in the Fe−P atom pair using operando techniques and density functional theory, revealing that the P atom provides additional adsorption sites for accelerating water dissociation, boosting the hydrogenation of CO₂, and enhancing the activity of CO₂ reduction. This atom-pair catalytic strategy can modulate multiple reactants and intermediates to break through the inherent limitations of single-atom catalysts.     

Water Activation Triggered by Cu−Co Double-Atom Catalyst for Silane Oxidation

High-performance catalysts sufficient to significantly reduce the energy barrier of water activation are crucial in facilitating reactions that are restricted by water dissociation. Herein we present a Cu−Co double-atom catalyst (CuCo-DAC), which possesses a uniform and well-defined CuCoN₆(OH) structure, and works together to promote water activation in silane oxidation. The catalyst achieves superior catalytic performance far exceeding that of single-atom catalysts (SACs). Various functional silanes are converted into silanols with up to 98 % yield and 99 % selectivity. Kinetic studies show that the activation energy of silane oxidation by CuCo-DAC is significantly lower than that of Cu single-atom catalyst (Cu-SAC) and Co single-atom catalyst (Co-SAC). Theoretical calculations demonstrate two different reaction pathways where water splitting is the rate-determining step and it is accelerated by CuCo-DAC, whereas H₂ formation is key for its single-atom counterpart.     

S-Block Potassium Single-atom Electrocatalyst with K−N4 Configuration Derived from K+/Polydopamine for Efficient Oxygen Reduction

Currently, single-atom catalysts (SACs) research mainly focuses on transition metal atoms as active centers. Due to their delocalized s/p-bands, the s-block main group metal elements are typically regarded as catalytically inert. Herein, an s-block potassium SAC (K−N−C) with K-N₄ configuration is reported for the first time, which exhibits excellent oxygen reduction reaction (ORR) activity and stability under alkaline conditions. Specifically, the half-wave potential (E_1/2) is up to 0.908 V, and negligible changes in E_1/2 are observed after 10,000 cycles. In addition, the K−N−C offers an exceptional power density of 158.1 mW cm⁻² and remarkable durability up to 420 h in a Zn-air battery. Density functional theory (DFT) simulations show that K−N−C has bifunctional active K and C sites, can optimize the free energy of ORR reaction intermediates, and adjust the rate-determining steps. The crystal orbital Hamilton population (COHP) results showed that the s orbitals of K played a major role in the adsorption of intermediates, which was different from the d orbitals in transition metals. This work significantly guides the rational design and catalytic mechanism research of s-block SACs with high ORR activity.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Using the Interaction between Copper and Manganese to Stabilize Copper Single-atom for CO Oxidation.

The interaction between Cu and Mn has been used to immobilize the Cu single-atom on MnO₂ surface by redox-driven hydrolysis. Comprehensive structure and property characterizations demonstrate that the existence of an Cu−Mn interaction on the catalyst surface can effectively restrain the aggregation of Cu single atoms and improve carbon monoxide (CO) oxidation activity. The interaction of forming the Cu−O−Mn entity is beneficial for CO catalytic activity as the migration of reactive oxygen species and the coordination effect of active centers accelerate the reaction. In particular, 3%-Cu₁/MnO₂ shows an oxygen storage capacity (OSC) value (342.75 μmol/g) more than ten times that of pure MnO₂ (27.79 μmol/g) and has high CO catalytic activity (T_90%=80 °C), it can maintain CO conversion of 95 % after 15 cycles. This work offers a reliable method for synthesizing Cu single-atom catalysts and deepens understanding of the interaction effect between single transition metal atoms and supports that can improve the catalytic activity of CO oxidation.     

One-Step Preparation of Fe/N/C Single-Atom Catalysts Containing Fe−N4 Sites from an Iron Complex Precursor with 5,6,7,8-Tetraphenyl-1,12-Diazatriphenylene Ligands

Fe/N/C single-atom catalysts containing Fe−N_x sites prepared by pyrolysis are promising cathode materials for fuel cells and metal-air batteries due to their high oxygen reduction reaction (ORR) activities. We have developed iron complexes containing N2- or N3-chelating coordination structures with preorganized aromatic rings in a 1,12-diazatriphenylene framework tethering bromo substituents as precursors to precisely construct Fe−N₄ sites in an Fe/N/C catalyst. One-step pyrolysis of the iron complex with carbon black forms atomically dispersed Fe−N₄ sites without iron aggregates. X-ray absorption spectroscopy (XAS) and electrochemical measurements revealed that the iron complex with N3-coordination is more effectively converted to Fe−N₄ sites catalyzing ORR with a TOF value of 0.21 e site⁻¹ s⁻¹ at 0.8 V vs. RHE. This indicates that the formation of Fe−N₄ sites is controlled by precise tuning of the chemical structure of the iron complex precursor.     

Highly efficient ammonia synthesis at low temperature over a Ru–Co catalyst with dual atomically dispersed active centers

The desire for a carbon-free society and the continuously increasing demand for clean energy make it valuable to exploit green ammonia (NH₃) synthesis that proceeds via the electrolysis driven Haber–Bosch (eHB) process. The key for successful operation is to develop advanced catalysts that can operate under mild conditions with efficacy. The main bottleneck of NH₃ synthesis under mild conditions is the known scaling relation in which the feasibility of N₂ dissociative adsorption of a catalyst is inversely related to that of the desorption of surface N-containing intermediate species, which leads to the dilemma that NH₃ synthesis could not be catalyzed effectively under mild conditions. The present work offers a new strategy via introducing atomically dispersed Ru onto a single Co atom coordinated with pyrrolic N, which forms RuCo dual single-atom active sites. In this system the d-band centers of Ru and Co were both regulated to decouple the scaling relation. Detailed experimental and theoretical investigations demonstrate that the d-bands of Ru and Co both become narrow, and there is a significant overlapping of t_2g and e_g orbitals as well as the formation of a nearly uniform Co 3d ligand field, making the electronic structure of the Co atom resemble that of a “free-atom”. The “free-Co-atom” acts as a bridge to facilitate electron transfer from pyrrolic N to surface Ru single atoms, which enables the Ru atom to donate electrons to the antibonding π* orbitals of N₂, thus resulting in promoted N₂ adsorption and activation. Meanwhile, H₂ adsorbs dissociatively on the Co center to form a hydride, which can transfer to the Ru site to cause the hydrogenation of the activated N₂ to generate N₂H_x (x = 1–4) intermediates. The narrow d-band centers of this RuCo catalyst facilitate desorption of surface *NH₃ intermediates even at 50 °C. The cooperativity of the RuCo system decouples the sites for the activation of N₂ from those for the desorption of *NH₃ and *N₂H_x intermediates, giving rise to a favorable pathway for efficient NH₃ synthesis under mild conditions.

The desire for a carbon-free society and the continuously increasing demand for clean energy make it valuable to exploit green ammonia (NH₃) synthesis that proceeds via the electrolysis driven Haber–Bosch (eHB) process.     

Activation of Molecular O2 on CoFe2O4 (001) Surfaces: An Embedded Cluster Study

Dioxygen activation pathways on the (001) surfaces of cobalt ferrite, CoFe₂O₄, were investigated computationally using density functional theory and the hybrid Perdew-Burke-Ernzerhof exchange-correlation functional (PBE0) within the periodic electrostatic embedded cluster model. We considered two terminations: the A-layer exposing Fe²⁺ and Co²⁺ metal sites in tetrahedral and octahedral positions, respectively, and the B-layer exposing octahedrally coordinated Co³⁺. On the A-layer, molecular oxygen is chemisorbed as a superoxide on the Fe monocenter or bridging a Fe−Co cation pair, whereas on the B-layer it is adsorbed at the most stable anionic vacancy. Activation is promoted by transfer of electrons provided by the d metal centers onto the adsorbed oxygen. The subsequent dissociation of dioxygen into monoatomic species and surface reoxidation have been identified as the most critical steps that may limit the rate of the oxidation processes. Of the reactive metal-O species, [Fe^III−O]²⁺ is thermodynamically most stable, while the oxygen of the Co−O species may easily migrate across the A-layer with barriers smaller than the associative desorption.     

Highly Ordered and Thermally Stable FeRh Cluster Superlattice on Graphene for Low-Temperature Catalytic CO Oxidation

We report on bimetallic FeRh clusters with a narrow size-distribution grown on graphene on Ir(111) as a carbon-supported model catalyst to promote low-temperature catalytic CO oxidation. By combining scanning tunneling microscopy with catalytic performance measurements, we reveal that Fe−Rh interfaces are active sites for oxygen activation and CO oxidation, especially at low temperatures. Rh core Fe shell clusters not only provide the active sites for the reaction, but also thermally stabilize surface Fe atoms towards coarsening compared with pure Fe clusters. Alternate isotope-labelled CO/O₂ pulse experiments show opposite trends on preferential oxidation (PROX) performance because of surface hydroxyl species formation and competitive adsorption between CO and O₂. The present results introduce a general strategy to stabilize metallic clusters and to reveal the reaction mechanisms on bimetallic structures for low-temperature catalytic CO oxidation as well as preferential oxidation.     

Construction of Co4 Atomic Clusters to Enable Fe−N4 Motifs with Highly Active and Durable Oxygen Reduction Performance

Fe−N−C catalysts with single-atom Fe−N₄ configurations are highly needed owing to the high activity for oxygen reduction reaction (ORR). However, the limited intrinsic activity and dissatisfactory durability have significantly restrained the practical application of proton-exchange membrane fuel cells (PEMFCs). Here, we demonstrate that constructing adjacent metal atomic clusters (ACs) is effective in boosting the ORR performance and stability of Fe−N₄ catalysts. The integration of Fe−N₄ configurations with highly uniform Co₄ ACs on the N-doped carbon substrate (Co₄@/Fe₁@NC) is realized through a “pre-constrained” strategy using Co₄ molecular clusters and Fe(acac)₃ implanted carbon precursors. The as-developed Co₄@/Fe₁@NC catalyst exhibits excellent ORR activity with a half-wave potential (E_1/2) of 0.835 V vs. RHE in acidic media and a high peak power density of 840 mW cm⁻² in a H₂−O₂ fuel cell test. First-principles calculations further clarify the ORR catalytic mechanism on the identified Fe−N₄ that modified with Co₄ ACs. This work provides a viable strategy for precisely establishing atomically dispersed polymetallic centers catalysts for efficient energy-related catalysis.