Chemical and radiochemical evaluation of the purity of99mTc extracted by MEK

Solvent extraction separation of^99mTc from⁹⁹Mo using methyl ethyl ketone(MEK) has been found to be an effective method of obtaining^99mTc of medicinal purity from low specific activity⁹⁹Mo. The authors have investigated the effect of alkali and molybdenum concentration on the extraction of⁹⁹Mo and^99mTc into methyl ethyl ketone. The possibility of methyl ethyl ketone forming enol and condensation products and its effect on the final extraction efficiency and purity of^99mTc has been studied. Sodium molybdate has been found to have a good salting out effect on^99mTc pertechnetate and hence^99mTc extraction can be better accomplished from low specific activity⁹⁹Mo solutions. The ketone seems to form traces of condensation products in the extraction procedure. These have been found to be coextracted with^99mTc into MEK but did not affect the extractability of^99mTc. It was observed that neutral alumina column removes these condensation products from MEK containing^99mTc. Alternately these could be filtered off by acidification of the final aqueous^99mTc solution. The studies indicate that under optimum experimental conditions methyl ethyl ketone separates^99mTc from⁹⁹Mo with high efficiency and yields^99mTc of high purity suitable for use in nuclear medicine in the form of various labelled compounds.     

Pharmaceutical grade sodium [99mTc] pertechnetate from low specific activity 99Mo using an automated 99Mo/99mTc-TCM-autosolex generator

Performance study of a computer controlled automated closed cyclic module for the separation and recovery of ^99mTc from low specific activity (n, γ) ⁹⁹Mo using methyl ethyl ketone (MEK) solvent extraction technique named ⁹⁹Mo/^99mTc-TCM-AUTOSOLEX (Technetium automated solvent extraction) Generator is described. The entire system is automated and controlled by a user-friendly PC based graphical user interface that actually supervises process via an embedded system based electronic controller. The average yield of separation of ^99mTc was above 85 % and ⁹⁹Mo breakthrough in ^99mTc pertechnetate was <0.002 %. The sodium pertechnetate obtained was a clear solution having pH 6–7, Radiochemical (RC). Purity >99 %, MEK content <0.1 % (v/v), Al and Mo content <10 µg/ml. R. C. Purity of ^99mTc-radiopharmaceuticals studied was not less than 96 %. Bio-Quality control studies confirm that sodium pertechnetate obtained was sterile and pyrogen free. Imaging studies in animals and humans with limited radiopharmaceuticals show that the quality of ^99mTc-pertechenate obtained in the present module was good enough to do clinical study.     

A novel technique for the separation of99mTc from99Mo

A new technique for the separation of^99mTc from low specific activity⁹⁹Mo is reported. A separation based on the principle of precipitation of⁹⁹Mo as calcium molybdate has been investigated. On precipitating⁹⁹MoO ₄ ^2– from alkaline solution as calcium molybdate under controlled conditions, the^99mTcO ₄ ^– is found to remain quantitatively in the supernatant solution with little carry-over of⁹⁹Mo. This calcium molybdate (⁹⁹Mo) could be redissolved and reprecipitated at regular intervals, yielding^99mTc quantitatively in aqueous neutral solutions. Calcium molybdate precipitates containing up to 1.5 GBq of⁹⁹Mo and 130–180 mg of molybdenum were prepared and evaluated. The performance in terms of repeated^99mTc separation gave yields of 75–93% with acceptable readionuclidic and radiochemical purity.     

Radiochemical solvent extraction of molybdenum/VI/ using99Mo tracer

A radiochemical solvent extraction method has been developed for the micro determination of Mo/VI/ using⁹⁹Mo tracer. It involves removal of^99mTc by ethyl methyl ketone /EMK/ and extraction of Mo with tri-n-butyl phosphate /TBP/ from 5M HCl. Different parameters affecting the extraction such as pH dependence, nature of solvent and interferences due to other radionuclides have been studied. The method can be used up to 2 g of Mo.     

The quality of99mTc eluates

The possible effects of several protecting procedures on the quality of^99mTc eluates were investigated. The content of⁹⁹Mo in the eluates (⁹⁹Mo breakthrough) was expressed in (%) with respect to the total adsorbed⁹⁹Mo radioactivity and in () i.e. as the ratio of⁹⁹Mo and^99mTc radioactivities in each particular eluate. The radiochemical purity was expressed in (%) of^99mTc(VII) in the eluates. The content of Al³⁺ and Cu²⁺ as chemical impurities was also determined.     

Preparation of99Mo,132Te isotopes and99mTc,132I generators

Adsorption and desorption of⁹⁵Zr−⁹⁵Nb,⁹⁹Mo,¹⁰³Ru,¹³²Te and²³⁹Np in a HCl-alumina system were studied in order to purify⁹⁹Mo and¹³²Te obtained by the cation-exchange separation of fission products and to prepare highly pure^99mTc and¹³²I generators.⁹⁹Mo and¹³²Te, of which radionuclidic purity was over 99.99% and 99.999%, respectively, could be obtained by passing the cation-exchange separated Mo and Te fractions through alumina columns, by washing with HCl and finally by eluting⁹⁹Mo with 1M NH₄OH and¹³²Te with 3M NaOH. In order to raise the recovery of⁹⁹Mo and¹³²Te from the alumina columns, they should be eluted as quickly as possible after the adsorption. The direct use of the alumina column containing⁹⁹Mo or¹³²Te as the generator allowed milking of^99mTc or¹³²I, of which radionuclidic purity was over 99.999%. Milking yields of^99mTc with 0.1M HCl and¹³²I with 0.01M NH₄OH were 77% and 90%, respectively. The latter value was much higher than that in usual performance of the generator.     

Determination of molybdenum in biological materials by combined extraction of99Mo and99mTc

Combined extraction of⁹⁹Mo and its daughter-product^99mTc enables a rapid determination of molybdenum in biological samples by neutron activation analysis. A procedure and its application to standard kale powder and standard animal blood are reported.     

A simple and sensitive separation technique of 99Mo and 99mTc from their equilibrium mixture

The present work describes a simple and inexpensive separation method of ⁹⁹Mo from the equilibrium mixture. The liquid–liquid extraction technique has been employed to separate ⁹⁹Mo and ^99mTc using triisooctylamine (TIOA). The ⁹⁹Mo and ^99mTc were quantitatively separated out in 2 M TIOA with tripled distilled water; ^99mTc was back extracted from TIOA organic phase to aqueous phase by 0.1 M DTPA. The species information or indirect speciation of molybdenum was also established by the extraction profile of the molybdenum.     

Preparation of a sterile closed system99mTc generator based on zirconium molybdate

A procedure for preparation of a sterile closed system generator for^99mTc based on conversion to zirconium molybdate of⁹⁹Mo produced by neutron activation is reported. The generator is sterilized by autoclaving.^99mTc is eluted using 0.9% NaCl with high yield and purity in successive elutions.     

Rapid and sensitive determination of pertechnetate in99Mo/99mTc generator eluates by reversed-phase high-performance liquid chromatography

Reversed-phase high-performance liquid chromatography with u.v. detection was applied for rapid and sensitive determination of pertechnetate in⁹⁹Mo/^99mTc generator eluates, using a mixture solvent of acetonitrile and 0.04M aqueous acetate buffer (1/1) containing a few volume percentage of 0.5 M tetra-n-butylammonium hydroxide as the mobile phase. Employing a -bondapak C₁₃ column, the TcO ₄ ^– species was separated, monitored with absorbance at 254 nm, and observed at the retention time of 3.5 min. The detection limit was found to be 5.2·10^–10 g of Tc for each injection. Total Tc contents in the^99mTc eluates from clinically-used⁹⁹Mo/^99mTc generator were analyzed by this technique. The^99mTc (⁹⁹Tc) species was separated from the contaminant⁹⁹Mo. This method was found to be useful for the purification of^99mTc (⁹⁹Tc) as well as the determination of total Tc content.     

Desorption of99Mo from spent99Mo/99mTc generator

A simple method for desorption and purification of⁹⁹Mo from spent⁹⁹Mo/^99mTc generators is described. The alumina column was washed successively with 0.9% saline water, 35% H₂O₂, and then the⁹⁹Mo was eluted with 2M NH₄OH. Ammonia and residual H₂O₂ were removed by heating the eluate. Finally,⁹⁹Mo solution was passed through a 0.2 m membrane filter to remove precipitated aluminium hydroxide.     

99mTc generator with hydrated MnO2 as adsorbent of 99Mo

An ^99mTc generator with MnO₂ as adsorbent of ⁹⁹Mo was investigated. Through batch experiments the retention of ⁹⁹Mo onto MnO₂was studied as a function of the shaking time and the pH value of the ⁹⁹Mo solution. It was found that ⁹⁹Mo showed a retention of 100% onto MnO₂ at the pH range from 3 to 11, and the equilibrium distribution was reached in less than 10 minutes. In column experiments the retention of ⁹⁹Mo onto MnO₂ was also high: 99.72%. In this case, the pH of the utilized ⁹⁹Mo solution was 5. The ^99mTc could be eluted from the MnO₂-⁹⁹Mo column by using either distilled water with a pH of 5 or an aqueous solution of 0.9% NaCl. With the saline solution, the ^99mTc elution yields were higher than 80%, and only one aliquot of 5 ml was needed to get these yields. The best results were obtained when the column was packed with 1 g of MnO₂. The water and the saline solution were passed through the column at a rate of 1.25 ml/min.     

A99Mo-99mTc generator based on the use of zirconium molybdophosphate-99Mo gel

A modified⁹⁹Mo–^99mTc gel generator is described. The present generator uses an insoluble zirconium molybdophosphate (ZrMP) gel tagged with⁹⁹Mo. Molybdenum-99 is chemically combined in the gel structure and cannot be eluted from the matrix. The presence of phosphate increases the chemical stability of the gel and decreases the molybdenum breakthrough. The prepared gel is sufficiently porous to permit ready diffusion of^99mTcO ₄ ^– which can be cluted with saline in yields of up to 90%. The gel was found to contain 25.1% Mo, 21.9% Zr, and 0.7% P in a molar ratio of 1.09:1.0:0.09, respectively. The high molybdenum content of the gel allows the use of cheap, non-polluting (n, )⁹⁹Mo. The eluted^99mTc was of high purity and can be used for medical and pharmaceutical applications.     

Hydrated titanium dioxide as an adsorbent for99Mo−99mTc generator

The adsorption behaviour of⁹⁹Mo in the form of molybdate and of^99mTc in the form of pertechnetate on hydrated titanium dioxide was investigated at different molarities of hydrochloric acid. The adsorption capacity of molybdate on hydrated TiO₂ is higher than on Al₂O₃. A^99mTc-generator is suggested. This generator is based on the adsorption of (⁹⁹Mo) molybdate on hydrated TiO₂, at acidities of 0.05–0.1M. HCl.^99mTc is eluted with 0.9% NaCl. Radionuclidic, radiochemical and chemical purities of the eluates were checked. This generator seems to have a great potential as compared to the traditional alumina generators.     

Rapid estmation of technetium in99Mo−99mTc generators

A nomogram is presented to estimate the radiooctivity of^99mTc in⁹⁹Mo−^99mTc generators, based on equations of radioactive equilibrium. Since the parent element decays through two isomeric states of the daughter, the ratio of the total mass of technetium per millicurie of^99mTc is a function of the time elapsed between two consecutive elutions. Values of the amount of^99mTc expressed as a mole fraction or in moles or grams of total technetium per millicurie of^99mTc^m are also presented.     

Development of electrochemical labelling procedures using MEK extracted99mTc

Electrolytic labelling procedures have been reported for various^99mTc radiopharmaceuticals which differ widely in the choice of the electrodes, working pH, applied voltage and the quantity of current passed. The authors have studied the electrolytic labelling of^99mTc EHDP, gluconate and glucoheptonate with MEK extracted^99mTc using tin electrodes under different experimental conditions. The results have, shown that these compounds can be efficiently labelled with^99mTc in a single step procedure avoiding multiple pH adjustments. Labelling of human serum albumin microspheres suitable for lung imaging with^99mTc by the electrolytic method is also reported.     

The study of conditions for the preparation and application of99Mo−99mTc generators starting from irradiated molybdenum metal

⁹⁹Mo−^99mTc generators were prepared starting from irradiated molybdenum metal instead of MoO₃ in order to use reactor irradiation space more economically. The adsorption of molybdenum as sodium molybdate on different kinds of alumina was investigated. The effect of the pH of the column and the aqueous phase concentration of molybdenum were studied and related to the elution yield of^99mTc. A study of the radiation damage effect indicated that generators having a high elution efficiency of 90% could be prepared in the 100–600 mCi range. The losses of⁹⁹Mo were minimized to 10⁻⁵-10⁻⁴% and those of alumina to 2–5 μg/ml eluate.     

A rapid method for recovery of radiochemically pure99mTc from MEK extracts

A method based on the sorption of^99mTc in MEK on an acid alumina column has been investigated. A number of parameters as column dimension, amount of alumina, MEK volumes, etc. is found to affect the extent of adsorption and the final purity of^99mTc solution. These parameters have been standardized and a method for rapid recovery of MEK-extracted^99mTc has been developed. The final characteristics of the^99mTc is found to conform to pharmacopoeia specification.     

Preparation of 99Mo/99mTc generator based on alumina 99Mo-molybdate (VI) gel

In this work alumina ⁹⁹Mo-molybdate (VI) gel is evaluated as a column matrix for use in the preparation of small chromatographic column type ^99mTc generator. Alumina molybdate (VI) gel is prepared by dissolving inactive MoO₃ with aluminum foil in 5 M NaOH solution containing ⁹⁹Mo radiotracer. After complete dissolution, 0.5 H₂O₂ was added to the reaction mixture solution and acidified to pH 5.5 with concentrated HNO₃. The formed AlMo precipitate was washed with NaNO₃ solution, dried at 50 °C for 24 h and then packed in the form of a chromatographic column for elution of the generated ^99mTc radionuclide with physiological saline solution (0.9 % NaCl). Greater than 86 % of the generated ^99mTc activity is immediately and reproducibly eluted with passing 10 mL of the saline solution through 2.0 g of alumina ⁹⁹Mo-molybdate column bed at a flow rate of about 1.0 mL/min. The high radiochemical ≥98.6 % TcO₄ ^?, radionuclidic ≥99.90 % ^99mTc and chemical purities of the eluates satisfy the specifications for use in nuclear medicine.     

Separation of99mTc from neutron-irradiated MoO3 by precipitation as CaMoO4

A method is discussed for separating^99mTc from⁹⁹Mo by dissolution and reprecipitation of CaMoO₄ containing⁹⁹Mo-^99mTc.^99mTc can be obtained successfully with a yield of about 80% and with a radionuclidic purity as high as over 99.7%. On the other hand, by agitating Ca⁹⁹ MoO₄ solid with 0.9% NaCl aqueous solution,^99mTc can directly be obtained with a yield of about 30% without any impurities.