Role of differential scanning calorimetry (DSC) in the staging of COPD

Chronic obstructive pulmonary disease (COPD) is an imminent public health catastrophe. A proper severity marker is desperately needed to reflect the progress of the disease in a stage-specific manner (GOLD I–IV/A–D). The aim of the study was testing the applicability of thermodynamic analysis of blood, identifying different stages of COPD patients against each other and healthy controls. Sera from 63 COPD patients were investigated using differential scanning calorimetry (DSC). Patients formed four groups according to their GOLD severity stages, and smoking or ex-smoking subgroups were further analysed. In total, 18 GOLD A, 17 GOLD B, 16 GOLD C and 12 GOLD D patients’ DSC characteristics were investigated. Nine healthy sera (smoker and non-smoker controls) were evaluated using the same methodology. Enthalpy and melting parameters of severe COPD patients are significantly different from those in the early stages and from healthy subjects. There are clearly visible trends in both features in all stages as COPD progresses. The thermal denaturation parameters are significantly different between the smokers and non-smokers in advanced COPD stages (C&D). Healthy controls do not differ significantly according to their smoking status. The new thermophysical method described here has a potential to be applicable as a stage and/or symptom score of the individual COPD patients. Longitudinal studies are needed to monitor DSC changes of the same patients during progression and/or stagnation.     

Selective detection of bismuth(III) and iron(II) ions with certain new reagents

Isoperthiocyanic acid (3-amino-5-thione-1,2,4-dithiazole) (I), tetraethylthiuram monosulphide ("Tetmosol") (II), eosin (III), and mercurochrome (IV) are used as new qualitative reagents for bismuth, III and IV are also used for detection of iron(II). A conc. sulphuric acid solution of I, or an acctone solution of II, when treated with bismuth in presence of potassium iodide, gives a deep red or reddish-orange precipitate, characteristic of bismuth. Bismuth in presence of III or IV gives a heavy and characteristically bright deeppink precipitate on addition of ammonia. With I, 1 mug of bismuth may be detected with a dilution limit of 1:50,000. Sb(III) and As(III) do not interfere in any of these tests. Iodides interfere only when I and II are used as reagents. Pb, Cu(II). and Fe(III) interfere with III and IV. I and II are also proposed as reagents for iodide; nitrites would interfere. III and IV, with iron(II) on addition of ammonia, produce a precipitate with highly intense green fluorescence. No other common cation [including Fe(III)] or anion interferes. The limit of detection is 3 mug ml .     

Flow injection analysis for oxidation state speciation of vanadium(IV) and vanadium(V) in natural water.

A sensitive and simultaneous spectrophotometric flow injection method for the determination of vanadium(IV) and vanadium(V) is proposed. The method is based on the effect of ligands such as 2,4,6-tris(2-pyridyl)-1,3,5-triazine (TPTZ) and diphosphate on the conditional redox potential of iron(III)/iron(II) system. A four-channel flow system is assembled. In this flow system, diluted hydrochloric acid (1.0 x 10(-2) mol dm(-3)) as a carrier for standard/sample, acetate buffer (pH 5.5) as a carrier for diphosphate solution, an equimolar mixed solution of iron(III) and iron(II) and a TPTZ solution are delivered, so that the baseline absorbance can be established by forming a constant amount of iron(II)-TPTZ complex (lambda(max) = 593 nm). Vanadium(IV) and/or vanadium(V) (400 microL) and diphosphate (200 microL) solutions are simultaneously introduced into the flow system; in this system the diphosphate solution passes through a delay coil. The potential of the iron(III)/iron(II) system increases in the presence of TPTZ, and therefore vanadium(IV) is easily oxidized by iron(III) to vanadium(V) to produce an iron(II)-TPTZ complex (a positive peak for vanadium(IV) appears). On the other hand, the potential of the redox system decreases in the presence of diphosphate, so that vanadium(V) can be easily reduced by iron(II) to vanadium(IV). In this case, the amount of iron(II) decreases according to the amount of vanadium(V). As a result, the produced iron(II)-TPTZ complex decreases (a negative peak for vanadium(V) appears). In this manner, two peaks for vanadium(IV) and vanadium(V) can be alternately obtained. The limits of detection (S/N = 3) are 1.98 x 10(-7) and 2.97 x 10(-7) mol dm(-3) for vanadium(IV) and vanadium(V), respectively. The method is applied to the simultaneous determination of vanadium(IV) and vanadium(V) in commercial bottled mineral water samples.     

Pyridine-2-aldoxime and 6-methylpyridine-2-aldoxime as gravimetric reagents for estimation of palladium(II) and uranium(VI)

Pyridine-2-aldoiumc (I) has been found to be a sensitive reagent for the gravimetric determination of palladium(II). From chloride medium, precipitation is complete at pH 3.0-11.0, and in solution containing 1NHNO(3) to pH6.0. The compositions of the precipitates (dried at 130 degrees ) correspond to PdL(2), and PdL(2). HNO(3) (HL representing the reagent) respectively. Pd(II) can be estimated gravimetncally in presence of acetate, oxalate, tartrate, phosphate, fluoride borate, perchlorate, Cu(II), Cd, Co(II), Fe(II), Ni, Zn, Pb, Bi, Sb(III), Pt(IV), Ir(IV), Ru(III), Rh(III); Os(IV) in quantities more than twice that of Pd(II), and Ag(I), Au(III) and Fe(II) even m traces cause serious interference. The yellow uranium(VI) complex with (I) is precipitated quantitatively over the pH range 3.5-10.5 and, after washing and drying corresponds to the composition (c(6)h(5)n(2)o)(2)uo(2), The uranium(VI) complex with 6-methylpyridine-2-aldoxime (II) is precipitated quantitatively over the pH range 3.0-10.5, and after washing and drying at 120-130 degrees corresponds to UO(2),(C(7),H(7),N(2)O)(2). Both (I) and (II) are suitable for the estimation of 1-50 mg of uranium(VI) in the presence of up to 10-fold quantities ofTh(IV), La(III) and Ce(III) even when present together. Ce(IV) in quantities more than three times that of U must be reduced to Ce(III). Tartrate, citrate, phosphate, Ti(IV) and Zr interfere, but acetate, oxalate, and borate do not.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Electron transfer. 157. Reactions of hypervalent manganese species with S(2) metal-ion reductants

Solutions of the complexes of hypervalent manganese, [Mn(III)(C(2)O(4))(3)](3)(-) (in oxalate buffers), [Mn(IV)(bigH)(3)](4+) (in biguanide buffers), and [(bipy)(2)Mn(III)(O)(2)Mn(IV)(bipy)(2)](3+) (in bipyridyl buffers) may be reduced by s(2) center reductants In(I), Sn(II), and Ge(II), yielding Mn(II) quantitatively. In all cases, rates are determined by the initial act of electron transfer, giving an s(1) transient (In(II), Sn(III), or Ge(III)); subsequent steps are rapid and kinetically silent. The In(I)-Mn(III) and Ge(II)-Mn(III) reactions are inhibited by added oxalate, whereas the Sn(II)-(Mn(III)Mn(IV)) reaction is strongly accelerated by Cl(-). The In(I)-Mn(IV) reaction is complicated by formation of a 1:1 addition compound In(I).Mn(IV). We find no evidence for two-unit steps in any of these systems.     

Reductions by titanium(II) as catalyzed by titanium(IV)

The cobalt(III) complexes, [(NH3)5CoBr]2+ and [(NH3)5CoI]2+ are reduced by Ti(II) solutions containing Ti(IV), generating nearly linear (zero-order) profiles that become curved only during the last few percent of reaction. Other Co(III)-Ti(II) systems exhibit the usual exponential traces with rates proportional to [Co(III)]. Observed kinetics of the biphasic catalyzed Ti(II)-Co(III)Br and Ti(II)-Co(III)I reactions support the reaction sequence: [Ti(II)(H20)n]2+ + [Ti(IV)F5]- (k1)<==>(k -1) [Ti(II)(H2O)(n-1)]2+ + [(H2O)Ti(IV)F5]-, [Ti(II)(H2O)(n-1)]2+ + Co(III) (k2)--> Ti(III) + Co(II) with rates determined mainly by the slow Ti(IV)-Ti(II) ligand exchange (k1 = 9 x 10(-3) M(-1) s(-1) at 22 degrees C). Computer simulations of the catalyzed Ti(II)-Co(III) reaction in perchlorate-triflate media yield relative rates for reduction by the proposed active [Ti(II)(H2O)(n-1)]2+ intermediate; k(Br)/k(I) = 8.     

Metal- and ligand-centered monoelectronic oxidation of mu-nitrido[((tetraphenylporphyrinato)manganese)phthalocyaninatoiron)], [(TPP)Mn-N-FePc]. X-ray crystal structure of the Fe(IV)-containing species [(THF)(TPP)Mn-N-FePc(H(2)O)](I(5))02THF

The reaction of mu-nitrido[((tetraphenylporphyrinato)manganese)(phthalocyaninatoiron)], [(TPP)Mn-N-FePc], with I(2) in THF develops with the formation of two different species, i.e., [(THF)(TPP)Mn-N-FePc(H(2)O)](I(5)).2THF (I) and [(TPP)Mn(IV)-N-Fe(III)Pc](I(3)) (II). On the basis of single-crystal X-ray work and M?ssbauer, EPR, Raman, and magnetic susceptibility data, I, found to be isostructural with the corresponding Fe-Fe complex, is shown to contain a low-spin triatomic Mn(IV)=N=Fe(IV) system (metal-centered oxidation). Data at hand for II (M?ssbauer, EPR, Raman) show, instead, that oxidation takes place at one of the two macrocycles, very likely TPP (ligand-centered oxidation). The same cationic fragment present in I, and containing the Mn(IV)=N=Fe(IV) bond system, is also obtained when (TPP)Mn-N-FePc is allowed to react in THF with (phen)SbCl(6) (molar ratio 1:1). There are indications that the use of (phen)SbCl(6) in excess (2:1 molar ratio), in benzene, probably determines further oxidation with the formation of a species showing the combined presence of the Mn(IV)-Fe(IV) couple and of a pi-cation radical.     

Analytical applications of m- and p-phenylene-di(1-tetrazoline-5-thione) Gravimetric determination of ruthenium(lll) in presence of large amounts of rhodium (III)

A simple and rapid method is described for the gravimetric determination of ruthenium(III) with two new isomeric reagents, m-and p-phenylene-di(1-tetrazoline-5-thione). Solutions containing milligram amounts of ruthenium(III)on treatment with the acetone or alcohol solutions of the reagents at pH 5.5-7.0 give a quantitative yield of an intensely green insoluble 1:1 complex which can be easily filtered off and dried at 110-115 degrees . Amounts of ruthenium down to 0.5 mg can be determined with fairly good accuracy and precision. Even large amounts of rhodium do not cause any interference. The following cations interfere: Pd(II), Pt(IV), Au(III), Ir(IV), Bi, Fe(III), Cu(II), Hg(I), Hg(II), Pb, Cd, T1(I) and Ag.     

Simultaneous flow injection determination of iron(III) and vanadium(V) and of iron(III) and chromium(VI) based on redox reactions

A flow injection analysis (FIA) method is presented for the simultaneous determinations of iron(III)-vanadium(V) and of iron(III)-chromium(VI) using a single spectrophotometric detector. In the presence of 1,10-phenanthroline (phen), iron(III) is easily reduced by vanadium(IV) to iron(II), followed by the formation of a red iron(II)-phen complex (lambda(max) = 510 nm), which shows a positive FIA peak at 510 nm corresponding to the concentration of iron(III). On the other hand, in the presence of diphosphate the reductions of vanadium(V) and/or chromium(VI) with iron(II) occur easily because the presence of diphosphate causes an increase in the reducing power of iron(II). In this case iron(II) is consumed during the reaction and a negative FIA peak at 510 nm corresponding to the concentration of vanadium(V) and/or chromium(VI) is obtained. The proposed method makes it possible to obtain both positive (for iron(III)) and negative (for vanadium(V) or chromium(VI)) FIA peaks with a single injection.     

Study on adsorption behavior of cesium using ammonium tungstophosphate (AWP)-calcium alginate microcapsules

A functional microcapsule was prepared by encapsulating the fine crystalline ammonium tungstophosphate(AWP) in calcium alginate polymer(CaALG).The characterization of AWP-CaALG microcapsule was examined by SEM and EPMA.The adsorption behavior of Cs(I),Rb(I),Sr(II),Pd(II),Ru(III),Rh(III),La(III),Ce(III),Dy(III) and Zr(IV) was investigated by the batch method.The batch experiments were carried out by varying the shaking times,HNO 3 concentration,and initial concentration of metal ions.Relatively large K d values above 10 5 cm 3 /g for Cs(I) were obtained in the range of 0.1-5 M HNO 3,resulting in a separation factor of Cs/Rb exceeding 10 2.In contrast,the K d values of Sr(II),Pd(II),Ru(III),La(III),Dy(III),Ce(III) and Zr(IV) were considerably lower than 50 cm 3 /g.The K d value of Cs(I) decreased in the order of the coexisting ions,H + > Na + >> NH 4 +,and a linear relationship with a slop of about 1 was obtained between log K d and log [NH 4 + ]([NH 4 + ] > 0.01 M).The adsorption of Cs(I) was found to be controlled by chemisorption mechanism,and followed a Langmuir-type adsorption equation.A high uptake percentage of 99.4% for Cs(I) was obtained by using the dissolved solutions of spent fuel from FBR-JOYO(JAEA).     

Synthesis of poly(acrylamidrazone-hydrazide) chelating fiber and application of enrichment-separation for traces of indium, tin, chromium, vanadium and titanium from solution samples

A poly(acrylamidrazone-hydrazide) chelating fiber has been synthesized from polyacrylonitrile fiber and used for enrichment-separation of traces of In(III), Sn(IV), Cr(III), VO(I) and Ti(IV) from solution samples with satisfactory results. These ions (5-250 ng/ml) can be quantitatively enriched (recovery > 95%) by the fiber at a 10 ml/min flow rate in the pH range 4-7, and desorbed quantitatively (recovery > 95%) with 10 ml of 2-5M hydrochloric acid from a fiber column at 6 ml/min flow rate. When the fiber, which had been stored in a glass bottle for about two years and then treated with strong acids (concentrated hydrochloric or nitric acid), was reused 10 times, the recoveries of the above ions by enrichment were still over 94%, and hundred-fold to thousand-fold excesses of Cu(II), Zn(II), Co(II), Ca(II), Mg(II), Fe(III) and Al(III) caused little interference in the determination of these ions by ICP-AES. The lowest concentrations for the proposed method were 50 ng/ml and In and Sn and 5 ng/ml for Cr, V and Ti. The RSD was 1.2-4.0%. The contents of these ions in real solution samples determined by this method were basically in agreement with the certified values of the samples, with average errors below 3.3%. The IR spectra of the fiber adsorbed with Cr(III) or VO(I) showed that Cr(III) or VO(I) combined mainly with nitrogen atoms in the fiber to form a coordination complex.     

Disodium-1,8-dihydroxy-naphthalene-3,6-disulphonate (chromotropic salt) as a reagent in inorganic analysis

Summary The compound disodium-1,8-dihydroxy-naphthalene-3,6-disulphonate (sodium salt of chromotropic acid) is employed as a colorimetric reagent for titanium. It is also known to produce coloured complexes with chromium(VI), vanadium and uranium. In the present paper the formation of colour with forty metallic ions has been studied qualitatively, in neutral as well as in alkaline and acidic media. It has been found that the reagent yields coloured complexes with mercury(I), tin(IV), platinum(IV), gold(III), tellurium(VI), molybdenum(VI), iron(III), aluminium(III), chromium(III), and uranyl(II) besides those recorded above.The colour reactions are particularly sensitive to uranyl(II), iron(III), mercury(I), tin(IV), gold(III) und molybdenum(VI).     

Use of tetracyanoplatinate (ii) for the luminescent detection of metalions

The tetracyanoplatinate(II) (TCP) ion forms insoluble fluorescent compounds with many metal ions. This property has not hitherto been exploited for analytical use. The soluble sodium TCP salt has been applied as a reagent for metal ion detection. Fluorescent precipitates useful for detection of the metal ions were obtained with Y(III), Zr(IV), Ag(I), Zn(II), Cd(II), Hg(I), Hg(II), A1(III), Pb(II), La(III) and Th(IV). Limits of detection ranged from 5 to 200 ppm. With ammonium acetate as a masking agent, selective detection of 10 ppm of silver was achieved in the presence of the other metal ions. As little as 20 ppm of zirconium can be detected in the presence of hafnium, which yields a non-fluorescent precipitate.     

Photoisomerization and thermal reversion of [3.3] (1,4)naphthaleno (9,10) anthracenophane derivatives

All compounds (I and II) photoisomerized to III and IV with φ=0.3 both in air and nitrogen while thermal reversion of III was 40 times slower than that of IV indicative of strained structure of I as judged by UV and NMR spectroscopy.     

Reductions by aquatitanium(II)

Solutions of titanium(II), prepared by dissolving titanium wire in mixtures of hydrofluoric and triflic acids, reduce quinones, nitrosodisulfonate anion, and complexes of cobalt(III). When the oxidant is taken in excess, these reactions yield Ti(IV), whereas with excess reductant, the principal product is Ti(III). These reactions are compared with those by Ti(III). Despite differences in rate laws, it is clear that rate ratios for the two reductants (kTiII/kTiIII) fall well below 10(4), the minimum selectivity corresponding to estimated differences in formal potentials, and in some instances, Ti(II), the stronger reductant, reacts more slowly. For both Ti(III) and Ti(II), reductions within the series [Co(NH3)5X]2+(where X=F, Cl, Br, and I), the fluoro complex reacts much more rapidly than its congeners, and the bromo and iodo complexes are slowest, an order similar to that for Eu2+ reductions, but opposite to that for Cr(II) and Cu(I). The [Co(NH3)5Br]2+ reaction with excess Ti(II) proceeds at rates very nearly independent of [oxidant] during the first 80-90% reaction, implying that initiation occurs via unimolecular conversion of Ti(II) to an activated cationic reducing species, in the same manner as the earlier described reduction of I3- by Ge(II) in aqueous HCl.     

Mandelazo I As A Reagent For Zr(IV) Determination

Abstract

A spectromeric study of the reaction of the Zr(IV) ions with Mandelazo I was carried out. Absorption spectra revealed that the maximum absorption of the zirconium compound appears at a wavelength (316 nm) different from the maxima of the reagent (253 and 390 nm). Beer-Lambert law is followed for zirconium concentrations of the order of 8.8x 10^?5 M (i.e. 8 μg Zr (IV)/mL). Possible interferences of ions such as Be(II), Cu(II), Zn(II), Al(III), Th(IV), U(VI), Mn(II), Fe(III), Co(II) and Ni(II) were investigated in connection with some masking agents such as SO₄ ^2- and C₂O₄ ^2-. Also, the solid state Zr(IV)-Mandelazo I compound was prepared and characterized by nitrogen and thermogravimetric analyses.     

Redox properties of cobalt(II) and methylcobalt(III) complexes with dianionic macrocyclic polychelate ligands

Redox potentials of a series of complexes of cobalt(II) and organocobalt(III) with tetraazamacrocyclic (N₄) and N₂O₂-noncyclic polychelate ligands have been determined by cyclic voltammetry. Introduction of ano-phenylene fragment instead of an ethylene fragment into an equatorial ligand and/or exchange of an N₄-coordination chromophore for the N₂O₂-analog has been shown to result in the anodic shift of redox potentials of MeCo(IV)L/ MeCo(III)L, MeCo(III)L/MeCo(II)L, and Co(II)L/Co(I)L pairs. It has been established that the solvent effect on redox potential is larger for Co(III)L/Co(II)L than for other pairs. Apparently, this is the first case when quasi-reversible stages of oxidation of MeCo(III)L to MeCo(IV)L⁺ and MeCo(IV)L⁺ to [MeCo(IV)L]²⁺ can be simultaneously observed. A. relatively stable complex of methylcobalt(IV) with a long lifetime at 20 °C has been registered by the ESR method.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1029–1033, June, 1993.     

A thermochemical investigation of guest-host interactions in labile Werner clathrates of the [Ni(4-EtPy)4(NCS)2]·G type (G = Methyl derivatives of benzene)

The stoichiometry of thermal decomposition has been studied for (I): [Ni(4-EtPy)₄(NCS)₂] as a host complex as well as for its clathrates [Ni(4-EtPy)₄(NCS)₂]·G where guest molecule G - toluene, (II): T, (III): o-xylene (o-X) and (IV): p-xylene (p-X). The loss of volatile components proceeds in three steps (−2L, −1L, −1L) for I and in four steps (−G, −2L, −1L, −1L) for II, III and IV. DSC and X-ray powder measurements indicated a phase transition in all compounds under study. However, this process is overlapped by the escape of G in II and III. The differences in enthalpy changes are associated with different guest-host interactions in the particular clathrates.     

Electron Transfer. 129. Copper Catalysis in the Thiol Reduction of Oxime-Bound Nickel(IV)(1)

Solutions of the Ni(IV) complex of the dianion of 2,6-diacetylpyridine dioxime (chelate II in text) are reduced very slowly by 2-aminoethanethiol at pH 2.3-3.0, but this reaction is catalyzed dramatically and specifically by dissolved copper, with Cu(I) the active reductant. When the [thiol]/[Ni(IV)] ratio exceeds 1.6, each Ni(IV) oxidizes two molecules of thiol, forming Ni(II) and R(2)S(2). At low concentrations of catalyst and reductant, reaction profiles are almost exponential, but at higher concentrations of either, curves become progressively more nearly linear. Reactions are sharply retarded by increases in acidity. Profiles for 14 runs, carried out with [H(+)] = 0.001-0.0040 M, [Ni(IV)] = (0.94-1.2) x 10(-)(5) M, [thiol] = (2.0-32) x 10(-)(4) M, and [Cu(2+)] = (2.5-80) x 10(-)(6)M, are consistent with a reaction sequence (eqs 2-10 in text) in which Cu(I) is generated in competing homolyses of the complexes Cu(II)(SRH) and Cu(II)(SRH)(2). Reduction of Ni(IV) appears then to proceed through a Ni(IV)Cu(I) adduct, which can undergo electron transfer (yielding Ni(III) and Cu(II)), either in a unimolecular fashion or, alternatively, as a result of attack by a second Cu(I) species. The Ni(IV)Cu(I) + Cu(I) process is reflected in approach to second-order dependences on [Cu(II)] and [thiol] (which generate Cu(I)) at high concentrations of these reagents. Reductions of the Ni(III) intermediate are taken to be much more rapid than those of Ni(IV). Kinetic trends in the present system stand in contrast to the more familiar catalytic patterns such as those seen when the same combination of thiol and catalyst is used to reduce superoxo complexes of cobalt(III). With the latter reactions, decay profiles for the oxidant tend to be exponential at high reagent concentrations but approach linearity at low.