Syntheses of Cationic, Six-Coordinate Cadmium(II) Complexes Containing Tris(pyrazolyl)methane Ligands. Influence of Charge on Cadmium-113 NMR Chemical Shifts

Treating a thf (thf = tetrahydrofuran) suspension of Cd(acac)(2) (acac = acetylacetonate) with 2 equiv of HBF(4).Et(2)O results in the immediate formation of [Cd(2)(thf)(5)](BF(4))(4) (1). Crystallization of this complex from thf/CH(2)Cl(2) yields [Cd(thf)(4)](BF(4))(2) (2), a complex characterized in the solid state by X-ray crystallography. Crystal data: monoclinic, P2(1)/n, a = 7.784(2) ?, b = 10.408(2) ?, c = 14.632(7) ?, beta = 94.64(3) degrees, V = 1181.5(6) ?(3), Z = 2, R = 0.0484. The geometry about the cadmium is octahedral with a square planar arrangement of the thf ligands and a fluorine from each (BF(4))(-) occupying the remaining two octahedral sites. Reactions of [Cd(2)(thf)(5)](BF(4))(4) with either HC(3,5-Me(2)pz)(3) or HC(3-Phpz)(3) yield the dicationic, homoleptic compounds {[HC(3,5-Me(2)pz)(3)](2)Cd}(BF(4))(2) (3) and {[HC(3-Phpz)(3)](2)Cd}(BF(4))(2) (4) (pz = 1-pyrazolyl). The solid state structure of 3 has been determined by X-ray crystallography. Crystal data: rhombohedral, R&thremacr;, a = 12.236(8) ?, c = 22.69(3) ?, V = 2924(4) ?(3), Z = 3, R = 0.0548. The cadmium is bonded to the six nitrogen donor atoms in a trigonally distorted octahedral arrangement. Four monocationic, mixed ligand tris(pyrazolyl)methane-tris(pyrazolyl)borate complexes {[HC(3,5-Me(2)pz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (5), {[HC(3,5-Me(2)pz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (6), {[HC(3-Phpz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (7), and {[HC(3-Phpz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (8) are prepared by appropriate conproportionation reactions of 3or 4 with equimolar amounts of the appropriate homoleptic neutral tris(pyrazolyl)borate complexes [HB(3,5-Me(2)pz)(3)](2)Cd or [HB(3-Phpz)(3)](2)Cd. Solution (113)Cd NMR studies on complexes 3-8 demonstrate that the chemical shifts of the new cationic, tris(pyrazolyl)methane complexes are very similar to the neutral tris(pyrazolyl)borate complexes that contain similar substitution of the pyrazolyl rings.     

A novel dinuclear MoVI complex with tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane

Recrystallization of [MoO₂Cl{HC(3,5‐Me₂pz)₃}]Cl [where HC(3,5‐Me₂pz)₃ is tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane] led to the isolation of large quantities of the dinuclear complex dichlorido‐2κ²Cl‐μ‐oxido‐κ²O:O‐tetraoxido‐1κ²O,2κ²O‐[tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐1κN²)methane]dimolybdenum(IV) acetonitrile monosolvate, [Mo₂Cl₂O₄(C₁₆H₂₂N₆)]·CH₃CN or [{MoO₂Cl₂}(μ₂‐O){MoO₂[HC(3,5‐Me₂pz)₃]}]·CH₃CN. At 150 K, this complex cocrystallizes in the orthorhombic space group Pbcm with an acetonitrile molecule. The complex has mirror symmetry: only half of the complex constitutes the asymmetric unit and all the heavy elements (namely Mo and Cl) are located on the mirror plane. The acetonitrile molecule also lies on a mirror plane. The two crystallographically independent Mo⁶⁺ centres have drastically different coordination environments: while one Mo atom is hexacoordinated and chelated to HC(3,5‐Me₂pz)₃ (which occupies one face of the octahedron), the other Mo atom is instead pentacoordinated, having two chloride anions in the apical positions of the distorted trigonal bipyramid. This latter coordination mode of Mo^VI was found to be unprecedented. Individual complexes and solvent molecules are close‐packed in the solid state, mediated by various supramolecular contacts.     

A New Synthesis of Charge‐Neutral Tris‐Pyrazolyl and ‐Methimazolyl Borate Ligands

The dimethylamine in the adducts [(HNMe₂)B(azolyl)₃] (azolyl=methimazolyl, pyrazolyl), obtained by reaction of the azole with B(NMe₂)₃, can readily be substituted with a range of nitrogen donors to provide new charge‐neutral, tripodal ligands in high yield. This observation has led to a revision of an earlier interpretation of the mechanism of the formation of these species. The donor properties of the ligands [(nmi)B(azolyl)₃] (nmi=N‐methylimidazole) have been compared with their anionic analogues [HB(azolyl)₃]^? by synthesis of their manganese(I)–tricarbonyl complexes and comparison of their infrared ν_CO energies. This comparison indicates that the new neutral ligands are only marginally weaker donors than the corresponding anionic hydrotris(azolyl)borate ligands. This may be explained by the ability of the attached nmi ring to stabilize a positive charge remotely from the coordinated metal, which may also account for the fact that the [(nmi)B(pyrazolyl)₃] ligand is a substantially stronger donor than the similarly neutral tris(pyrazolyl)methane ligand.     

Synthesis of a macrobicycle incorporating the tris(pyrazolyl)methane ligand

Steric crowding of the 3-position of tris(pyrazolyl)borate and -methane ligands has produced tetrahedral metal complexes with controlled reactivity. As an alternative, we propose to incorporate the tris(pyrazolyl)methane chelate in a macrobicyclic structure in order to create a cavity with well-defined dimensions and shape. Acid-catalyzed equilibration of excess of the new pyrazole 3-(1H-pyrazol-3-yl)benzenemethanethiol acetate with HC(3,5-Me(2)pz)(3) followed by hydrolysis affords a functionalized tris(pyrazolyl)methane, which reacts with 1,3,5-tris(bromomethyl)benzene in K(2)CO(3)/DMF to give the title compound. [structure: see text]     

Addition von kationischen Lewis‐Säuren [M′Ln]+ (M′Ln = Fe(CO)2Cp,Fe(CO)(PPh3)Cp,Ru(PPh3)2Cp,Re(CO)5, ${1 \over 2}$ Pt(PPh3)2, W(CO)3Cp an die anionischen Thiocarbonyl‐Komplexe [HB(pz)3(OC)2M(CS)]− (M = Mo,W; pz = 3,5‐dimethylpyrazol‐1‐yl)

Addition of Cationic Lewis Acids [M′L_n]⁺ (M′L_n = Fe(CO)₂Cp, Fe(CO)(PPh₃)Cp, Ru(PPh₃)₂Cp, Re(CO)₅, Pt(PPh₃)₂, W(CO)₃Cp to the Anionic Thiocarbonyl Complexes [HB(pz)₃(OC)₂M(CS)]⁻ (M = Mo, W; pz = 3,5‐dimethylpyrazol‐1‐yl) Adducts from Organometallic Lewis Acids [Fe(CO)₂Cp]⁺, [Fe(CO)(PPh₃)Cp]⁺, [Ru(PPh₃)₂Cp]⁺, [Re(CO)₅]⁺, [ Pt(PPh₃)₂]⁺, [W(CO)₃Cp]⁺ and the anionic thiocarbonyl complexes [HB(pz)₃(OC)₂M(CS)]⁻ (M = Mo, W) have been prepared. Their spectroscopic data indicate that the addition of the cations occurs at the sulphur atom to give end‐to‐end thiocarbonyl bridged complexes [HB(pz)₃(OC)₂MCSM′L_n].     

Unusual Coordination Modes of Tris(pyrazol‐1‐yl)borates: Synthesis and Solid State Structures of Sodium[(dimethylamino)tris(pyrazol‐1‐yl)borate], Potassium[(dimethylamino)tris(pyrazol‐1‐yl)borate], and Potassium[phenyltris(pyrazol‐1‐yl)borate]

We report the optimized syntheses and the solid state structures of the alkali metal tris(pyrazol‐1‐yl)borates M[Me₂NBpz₃] (M = Na⁺ ( 1 ), K⁺ ( 2 ); pz = pyrazol‐1‐yl) and K[PhBpz₃] ( 3 ). Even though 1 and 2 consist of polymeric chains in the solid state, it is possible to identify subunits where the [Me₂NBpz₃]^? ion acts as tridentate ligand towards Na⁺ and K⁺ and binds via two of its pyrazolyl rings and its dimethylamino nitrogen atom (κ³N_pz,N_pz,N_NMe). In 3 , the ligand [PhBpz₃]^? employs two pyrazolyl donors and the π‐face of its phenyl substituent for potassium coordination (κ³N,N,C).     

Isomerism in rhodium(I) N,S-donor heteroscorpionates: ring substituent and ancillary ligand effects

The heteroscorpionate ligands [HB(taz)(2)(pz(R))](-) (pz(R) = pz, pz(Me2), pz(Ph)) and [HB(taz)(pz)(2)](-), synthesised from the appropriate potassium hydrotris(pyrazolyl)borate salt and 4-ethyl-3-methyl-5-thioxo-1,2,4-triazole (Htaz), react with [{Rh(cod)(μ-Cl)}(2)] to give [Rh(cod)Tx] {Tx = HB(taz)(2)(pz), HB(taz)(2)(pz(Me2)), HB(taz)(2)(pz(Ph)), HB(taz)(pz)(2)}; the heteroscorpionate rhodaboratrane [Rh{B(taz)(2)(pz(Me2))}{HB(taz)(2)(pz(Me2))}] is the only isolable product from the reaction of [{Rh(nbd)(μ-Cl)}(2)] with K[HB(taz)(2)(pz(Me2))]. Carbonylation of the cod complexes gave a mixture of [Rh(CO)(2)Tx] and [(RhTx)(2)(μ-CO)(3)] which reacts with PR(3) to give [Rh(CO)(PR(3))Tx] (R = Cy, NMe(2), Ph, OPh). In the solid state the complexes are square planar with the particular structure dependent on the steric and/or electronic properties of the scorpionate and ancillary ligands. The complex [Rh(cod){HB(taz)(pz)(2)}] has the heteroscorpionate κ(2)[N(2)]-coordinated to rhodium with the B-H bond directed away from the rhodium square plane while [Rh(cod){HB(taz)(2)(pz(Me2))}] is κ(2)[SN]-coordinated, with the B-H bond directed towards the metal. The complexes [Rh(CO)(PPh(3)){HB(taz)(2)(pz)}] and [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Me2))}] are also κ(2)[SN]-coordinated but with the pyrazolyl ring cis to PPh(3); in the former the B-H bond is directed towards rhodium while in the latter the ring is pseudo-parallel to the rhodium square plane, as also found for [Rh(CO)(2){HB(taz)(2)(pz(Me2))}]. The analogues [Rh(CO)(PR(3)){HB(taz)(2)(pz(Me2))}] (R = Cy, NMe(2)) have the phosphines trans to the pyrazolyl ring. Uniquely, [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Ph))}] is κ(2)[S(2)]-coordinated. A qualitative mechanism is given for the rapid ring-exchange, and hence isomerisation, observed in solution.     

Synthesis and Structure of [Tp*Rh{P(C7H7)3}] – Competition between the Ligands Tris(3,5‐dimethyl‐1‐pyrazolyl)borate (Tp*) and Tris(1‐cyclohepta‐2,4,6‐trienyl)phosphane. Proof of the κ2(N,B–H) Coordination Mode of the Tp* Ligand

Stepwise introduction of the potential tripod ligands tris(3,5‐dimethyl‐1‐pyrazolyl)borate (Tp*) and tris(1‐cyclohepta‐2,4,6‐trienyl)phosphane into the coordination sphere of rhodium(I) leads mainly to [Tp*Rh{P(C₇H₇)₃}] ( 4 ), in which Tp* is linked to the rhodium through a single pyrazolyl group and a non‐linear B–H–Rh bridge. This is the novel, now firmly established coordination mode κ²(N,B–H). The phosphane ligand is coordinated through one Rh–P and two Rh‐olefin bonds. Important structural features determined for the crystalline state of 4 are retained in solution, as shown by the ¹H, ¹¹B, ¹³C, ³¹P and ¹⁰³Rh NMR spectra.     

Functionalised Tris(pyrazolyl)methane Ligands and Re(CO)3 Complexes Thereof

The synthesis of new tripodal nitrogen ligands derived from tris(pyrazolyl)methane (Tpm^R, R = H, tBu, Ph in 3‐position) is described. After deprotonation of the parent tris(pyrazolyl)methane Tpm^R, the carbanion reacts readily with ethylene oxide to yield the 3,3,3‐tris(3′‐substituted pyrazolyl)propanol ligands[(3‐Rpz)₃CCH₂CH₂OH, R = H, tBu, Ph, 1a – c ]. These ligands can be easily derivatised at the alcohol function. Microwave‐assisted reactions of these ligands and [Re(CO)₅Br] yields the complex [( 1a )Re(CO)₃]Br ( 4 ) in the case of ligand 1a , whereas in the case of the substituted ligands 1b and 1c degradation was observed. The degradation products are identified as [(Hpz^R)₂Re(CO)₃Br] [R = tBu ( 7b ), Ph ( 7c )]. These complexes were also prepared directly from [Re(CO)₅Br] and the corresponding pyrazoles by microwave‐assisted synthesis. The Re(CO)₃ complexes 4 and [( 1a )Re(CO)₃]OTf ( 5 ) are water‐soluble. The structures of 5· H₂O and [{(pz)₃CCH₂CH₃}Re(CO)₃]OTf · 1.5H₂O · ¹/₂CH₃CN ( 6· 1.5H₂O · ¹/₂CH₃CN) as well as the structure of 7b have been elucidated by X‐ray crystallography.     

Synthesis and structural characterization of fluorenyltris(pyrazol-1-yl)borate ligands as new examples of cyclopentadienyl/scorpionate hybrid ligands

Two fluorenyl/tris(pyrazol-1-yl)borate hybrid ligands, FlBpz₃Li and FlB(pz^3-tBu)₃Li, have been synthesized and structurally characterized by X-ray crystallography (Fl: 9-fluorenyl; pz: pyrazolyl). From the reaction of FlBpz₃Li and ZnCl₂ in THF, the dinuclear complex (THF)₃Lipz(Fl)Bpz₂ZnCl₂ was obtained in which a ZnCl₂ moiety is chelated by two pyrazolyl ligands while the third pz ring coordinates to an Li(THF)₃ fragment. Acetonitrile solutions of the compound gradually transform into the mononuclear species Fl(pz)Bpz₂Znpz₂B(pz)Fl featuring a distorted tetrahedral ZnN₄ core. In all molecular structures of [FlBpz₃]⁻ or [FlB(pz^3-tBu)₃]⁻ complexes investigated so far, the hybrid ligands adopt very similar conformations with only two pyrazolyl rings bonded to the central metal, whereas the third pyrazolyl acts as dangling substituent. The fluorenyl substituent of FlBpz₃Li may be deprotonated with KH in quantitative yield.     

Structural comparisons of silver(I) complexes of third-generation ligands built from tridentate (o-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)) versus bidentate poly(1-pyrazolyl)methane units (o-C(6)H(4)[CH(2)OCH(2)CH(pz)(2)](2)) (pz = pyrazolyl ring)

The new bitopic, bis(1-pyrazolyl)methane-based ligand o-C6H4[CH2OCH2CH(pz)2]2 (L2, pz = pyrazolyl ring) is prepared from the reaction of (pz)2CHCH2OH (obtained from the reduction of (pz)2CHCOOH with BH3.S(CH3)2) with NaH, followed by the addition of alpha,alpha'-dibromo-o-xylene. The reaction of L2 with AgPF6 or AgO3SCF3 yields {o-C6H4[CH2OCH2CH(pz)2]2(AgPF6)}n or {o-C6H4[CH2OCH2CH(pz)2]2(AgO3SCF3)}n, respectively. Both compounds in the solid state have tetrahedral silver(I) centers arranged in a 1D coordination polymer network. The analogous ligand based on tris(1-pyrazolyl)methane units, o-C6H4[CH2OCH2C(pz)3]2 (L3), reacts with AgO3SCF3 to form a similar coordination polymer, {o-C6H4[CH2OCH2C(pz)3]2(AgO3SCF3)}n. In this case, each tris(pyrazolyl)methane unit in L3 adopts the kappa2-kappa0 bonding mode. Crystallization of a 3:1 mixture of AgO3SCF3 and L3 yields {o-C6H4[CH2OCH2C(pz)3]2(AgO3SCF3)2}n, in which the tris(1-pyrazolyl)methane units adopt a kappa2-kappa1 coordination mode.     

Mononuclear and binuclear sandwich copper(II) complexes with poly(pyrazolyl)borate ligands: syntheses, structures and properties

A series of Cu(II) complexes Cu(2)[micro-pz](2)[HB(pz)(3)](2) (1), Cu[H(2)B(pz)(2)](2) (2), Cu[HB(pz)(3)](2) (3), Cu[HB(pz(Me2))(3)](2) (4), Cu[B(pz)(4)](2) (5) (pz=pyrazole), have been synthesized and characterized by elemental analysis, IR, UV-vis, X-ray diffraction, thermal analysis and theoretical analysis. The IR spectra give the Cu-N vibration modes at 322, 366, 344, 387, and 380 cm(-1) in complexes 1-5, respectively. The UV spectra show all the complexes have same UV absorption at 232 nm; there is another band at 332 nm for complexes 1, 2 and 4, while for complexes 3 and 5, the bands are at 272 and 308 nm, respectively. Complex 1 has a binuclear structure in which two pyrazole ligands bridge two Cu-Tp units. In 2-5, the Cu(II) centers are coordinated with dihydrobis(pyrazolyl)borate (Bp), hydrotris(pyrazolyl)borate (Tp), hydrotris(3,5-Me2pyrazolyl)borate (Tp'), tetrakis(pyrazolyl)borate (Tkp) respectively to form a mononuclear structure. The results of thermal analysis for complexes 1-5 are discussed too.     

The synthesis and x-ray structure of tris(pyrazolyl)borate(trimethyl)tin; a six-coordinate trialkyltin complex

Reaction between Me₃SnCl and K[HB(pz)₃) (pz= 1-pyrazolyl, C₃H₃N₂) affords [HB(pz)₃]SnMe₃ which was shown by a full X-ray structure determination (Trigonal, space group P$\text{3}$, a = b = 11.722(3), c = 8.211(2) Å, γ = 120°, Z = 2) to contain six-coordinate tin bonded to three methyl groups and to three pyrazolyl groups.     

Rhenium complexes of tris(pyrazolyl)methanes and sulfonate derivative

The trioxo [ReO(3){SO(3)C(pz)(3)}] (1) (pz = pyrazolyl) and oxo [ReOCl{SO(3)C(pz)(3)}(PPh(3))]Cl (2) compounds with tris(pyrazolyl)methanesulfonate were obtained by treatment of Re(2)O(7) or [ReOCl(3)(PPh(3))(2)], respectively, with Li[SO(3)C(pz)(3)], whereas [ReCl(3){HC(pz)(3)}] (3), [ReCl(3){HC(3,5-Me(2)pz)(3)}] (4) and [ReCl(4){eta(2)-HC(pz)(3)}] (5) were prepared by reaction of [ReOCl(3)(PPh(3))(2)] (3,4) or [ReCl(4)(NCMe)(2)] (5) with hydrotris(pyrazolyl)methane HC(pz)(3) (3,5) or hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me(2)pz)(3) (4). [ReO{SO(3)C(pz)(3)}{OC(CH(3))(2)pz}][ReO(4)] 6, with a chelated pyrazolyl-alkoxide, was derived from an unprecedented ketone-pyrazolyl coupling on reaction of crude 1 with acetone. The compounds have been characterized by elemental analyses, IR and NMR spectroscopies, FAB-MS spectrometry and cyclic voltammetry and, in the case of 5 and 6, also by single-crystal X-ray diffraction. The electrochemical E(L) Lever parameter has been estimated, for the first time, for the SO(3)C(pz)(3)(-) and oxo ligands allowing the measurement of their electron-donor character and comparison with other ligands. Compounds 1, 2 and 6 appear to be the first tris(pyrazolyl)methanesulfonate complexes of rhenium to be reported.     

Potassium S2N-heteroscorpionates: structure and iridaboratrane formation

The potassium salts of the new S(2)N-heteroscorpionate ligand hydrobis(methimazolyl)(3,5-dimethylpyrazolyl)borate [HB(mt)(2)(pz(3,5-Me))](-) and its known analogue hydrobis(methimazolyl)(pyrazolyl)borate [HB(mt)(2)(pz)](-) (prepared from KTp' or KTp and methimazole, Hmt), and the adduct KTp·Hmt have polymeric structures in the solid state (the first a ladder and the other two chains). The iridaboratranes [IrHLL'{B(mt)(2)X}] (X = pz(3,5-Me) or pz), prepared from the heteroscorpionate anion and [{Ir(cod)(μ-Cl)}(2)] (LL' = cod), subsequent carbonylation [LL' = (CO)(2)] and then reaction with phosphine [LL' = (CO)(PR(3)), R = Ph or Cy], have a pendant pyrazolyl ring and a bicyclo-[3.3.0] cage formed by an S(2)-bound B(mt)(2) fragment. The binuclear species [(cod)HIr{μ-B(mt)(3)}IrCl(cod)], the only isolated product of the reaction of KTm with [{Ir(cod)(μ-Cl)}(2)], also has an S(2)-bound iridaboratrane unit but with the third mt ring linked to square planar iridium(I).     

[Bis(3,5‐dimethylpyrazol‐1‐yl‐κN2)hydro(pyrazol‐1‐yl‐κN2)borato][(3,5‐dimethylpyrazol‐1‐yl‐κN2)dihydro(pyrazol‐1‐yl‐κN2)borato]nickel(II)

The title compound, [Ni(C₈H₁₂BN₄)(C₁₃H₁₈BN₆)] or Bp′Tp′Ni^II, where Bp′ is (3,5‐dimethylpyrazol‐1‐yl)dihydro(pyrazol‐1‐yl)borate and Tp′ is bis(3,5‐dimethylpyrazol‐1‐yl)hydro(pyrazol‐1‐yl)borate, contains a divalent Ni^II centre bound by the chelating N atoms of the polysubstituted pyrazolylborate ligands. It is shown to lack a strong agostic B—H...Ni interaction, implying that the sixth coordination site is unoccupied in the solid state. This square‐pyramidal complex is the only known crystal structure where the Ni^II centre is pentacoordinated while bonded exclusively to pyrazolyl units. This is of interest with respect to electrochemical and catalytic properties.     

Synthesis of an anthracene-based bis(pyrazolyl)methane ligand and the structural characterization of its dinuclear tricarbonylrhenium(I) complex

The new anthracene-based, bitopic bis(pyrazolyl)methane ligand 1,8-bis(4-[bis(1-pyrazolyl)methyl]phenyl)anthracene (1,8-[4-CH(pz)₂C₆H₄]₂C₁₄H₈) has been prepared by the cobalt-catalyzed reaction between thionyldipyrazole and 1,8-bis(4-formylphenyl)anthracene. The reaction between 1,8-[4-CH(pz)₂C₆H₄]₂C₁₄H₈ and Re(CO)₅Br yielded the dirhenium complex {μ-1,8-[4-CH(pz)₂C₆H₄]₂C₁₄H₈}[Re(CO)₃Br]₂. The solid state structure of this complex displays extensive noncovalent interactions, particularly CH-π and π-π interactions.     

Small scorpionate ligands: silver(I)-organophosphane complexes of 5-CF(3)-substituted scorpionate ligand combining a B-H...Ag coordination motif

The first 5-substituted trihydro(azolyl)borate system, the sodium trihydro(5-CF3-pyrazol-1-yl)borate, Na[H3B(5-(CF3)pz)], has been synthesized by the reaction of 3-trifuoromethyl-pyrazole with NaBH4 in high yield. Na[H3B(5-(CF3)pz)] reacts with AgNO3 in the presence of monodentate tertiary phosphanes PR3 (PR3=P(C6H5)3, P(p-C6H4CH3)3, P(m-C6H4CH3)3, P(o-C6H4CH3)3, or PCH3(C6H5)2) to afford silver(I) bis(phosphane) adducts. These compounds have been characterized by elemental analyses, FTIR, ESI-MS, and multinuclear (1H, 19F, and 31P) NMR spectroscopy. Solid-state structures of {[H3B(5-(CF3)pz)]Ag[P(C6H5)3]2} and {[H3B(5-(CF3)pz)]Ag[P(p-C6H4CH3)3]2} are also reported. They feature kappa2-N,H-bonded trihydro(pyrazolyl)borate ligands and pseudo-tetrahedral silver atoms.     

Unusual reactivity of tris(pyrazolyl)borate zirconium benzyl complexes

The synthesis and reactivity of [Tp*Zr(CH2Ph)2][B(C6F5)4] (2, Tp* = HB(3,5-Me2pz)3, pz = pyrazolyl) have been explored to probe the possible role of Tp'MR2+ species in group 4 metal Tp'MCl3/MAO olefin polymerization catalysts (Tp' = generic tris(pyrazolyl)borate). The reaction of Tp*Zr(CH2Ph)3 (1) with [Ph3C][B(C6F5)4] in CD2Cl2 at -60 degrees C yields 2. 2 rearranges rapidly to [{(PhCH2)(H)B(mu-Me2pz)2}Zr(eta2-Me2pz)(CH2Ph)][B(C6F5)4] (3) at 0 degrees C. Both 2 and 3 are highly active for ethylene polymerization and alkyne insertion. Reaction of 2 with excess 2-butyne yields the double insertion product [Tp*Zr(CH2Ph)(CMe=CMeCMe=CMeCH2Ph)][B(C6F5)4] (4). Reaction of 3 with excess 2-butyne yields [{(PhCH2)(H)B(mu-Me2pz)2}Zr(Cp*)(eta2-Me2pz)][B(C6F5)4] (6, Cp* = C5Me5) via three successive 2-butyne insertions, intramolecular insertion, chain walking, and beta-Cp* elimination.     

Tricaesium tris(oxalato‐κ2O1,O2)chromate(III) dihydrate

The title compound, Cs₃[Cr(C₂O₄)₃]·2H₂O, has been synthesized for the first time and the spatial arrangement of the cations and anions is compared with those of the other members of the alkali metal series. The structure is built up of alternating layers of either the d or l enantiomers of [Cr(oxalate)₃]³⁻. Of note is that the distribution of the [Cr(oxalate)₃]³⁻ enantiomers in the Li⁺, K⁺ and Rb⁺ tris(oxalato)chromates differs from those of the Na⁺ and Cs⁺ tris(oxalato)chromates, and also differs within the corresponding BEDT‐TTF [bis(ethylenedithio)tetrathiafulvalene] conducting salts. The use of tris(oxalato)chromate anions in the crystal engineering of BEDT‐TTF salts is discussed, wherein the salts can be paramagnetic superconductors, semiconductors or metallic proton conductors, depending on whether the counter‐cation is NH₄⁺, H₃O⁺, Li⁺, Na⁺, K⁺, Rb⁺ or Cs⁺. These materials can also be superconducting or semiconducting, depending on the spatial distribution of the d and l enantiomers of [Cr(oxalate)₃]³⁻.