The influence of short chain branch on formation of shish‐kebab crystals in bimodal polyethylene under shear at high temperatures

Formation of shish‐kebab crystals due to the coil–stretch transition under shear in the molten state using a bimodal polyethylene system with high molecular weight (HMW) fraction having different branch content was investigated. In specific, in situ small‐angle X‐ray scattering (SAXS) and wide‐angle X‐ray diffraction (WAXD) techniques were used to study the structure evolution of shish‐kebab crystals at high temperatures under simple shear. The SAXS results revealed that with the increase of branch content, shish‐kebab crystals became more stable at high temperatures (e.g., 139 °C). However, the shish length of the bimodal PE containing 0.11% branch was shorter than that with no branch. The WAXD results showed that the degree of crystallization for bimodal PE with HMW fraction having 0.11% branch increased with time but reached a plateau value of 1%, while that with no branch increased continuously till 11%. Furthermore, the crystal orientation of bimodal PE with HMW fraction having 0.11% branch was above 0.9 and maintained at a constant value, while that with no branch decreased from 0.9 to 0.1 upon relaxation. This study indicates that even though the crystallizability of the HMW fraction with branch content decreased, they could effectively stabilize the shear‐induced crystalline structure with shorter shish‐kebab crystals. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 786–794     

Structural development of ultra‐high strength polyethylene fibers: Transformation from kebabs to shishs through hot‐drawing process of gel‐spun fibers

Structural development of ultra‐high strength polyethylene fibers via hot‐drawing processes of as‐spun gel fibers was investigated by means of transmission electron microscopy. It is found that the shish‐kebabs developed in both the as‐spun and drawn fibers can be transformed continuously into the micro‐fibril structure composed mostly of the shish structure through the hot‐drawing process. The structure transformation involves a drastic decrease in diameter of the kebab plus the shish but almost no change in the shish diameter. This result suggests that the chains in the kebabs are incorporated into the shishs and consumed to extend the longitudinal dimension of the shishs during the drawing process. The proposed new deformation model well explains the relationship between the fiber morphology and their mechanical properties: the tensile strength and modulus of the fibers can be determined by the number of the shish in the fiber and the macroscopic diameter of the fiber, which are apriori determined at the spinning process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1861–1872, 2010     

Formation of a large‐scale shish‐kebab structure of polyoxymethylene in the melt spinning and the crystalline morphology evolution after hot stretching

Polyoxymethylene (POM) fiber was produced by melt spinning with a high take‐up speed, which imposed a strong flow field. An unexpected formation of a shish‐kebab morphology with multiple shish of POM fibers was reported for the first time. This morphology is a large‐scale shish kebab with a diameter of 10.5 µm. Further orientation of the POM fiber was obtained by hot stretching twice at 160°C. Two crystalline morphology evolution processes were also observed: (i) the process from the large‐scale shish‐kebab to the deformed small shish‐kebab and (ii) the process from the deformed small shish‐kebab to the perfect whiskers. Compared with the melt spinning fiber, fiber tensile strength with first and second hot stretching increased by 976% and 1705%, respectively. The crystalline melting behavior of fibers significantly changes after the first and second hot stretching. The flow field induces a large number of extended chain crystals. Copyright © 2014 John Wiley & Sons, Ltd.     

Two‐step cavitation in semi‐crystalline polymer during stretching at temperature below glass transition

Cavitation behavior in poly(4‐methyl‐1‐pentene) upon stretching below glass transition temperature was investigated by in situ ultra‐small angle X‐ray scattering technique. Strong stress‐whitening was observed indicating an extensive occurrence of cavitation in the material during tensile deformation below Tg. The X‐ray scattering patterns suggest oriented disc‐shaped cavities with normal mostly parallel to the stretching direction occurred. Structural parameters of such cavities such as thickness, radius, and tilting angle of the normal of the disc with respect to the stretching direction have been successfully calculated using a model fitting procedure. The results exhibited a two‐step process of cavitation that small amount of large cavities appeared first and then small cavities were triggered extensively in the samples at larger strains. This two‐step cavitation phenomenon can be weakened after the quenched sample was annealed or the sample was prepared by slow cooling. This peculiar two‐step cavitation process can be understood as a result of high frozen in internal stress in quenched sample that led to local failure of the materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2007–2014     

Effect of in situ poly(ethylene terephthalate) (PET) microfibrils on the morphological structure and crystallization behavior of isotactic polypropylene (iPP) under an intensive shear rate

The morphological structure and crystallization behavior of in situ poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) microparts prepared through micro‐injection molding are investigated using a polarized light microscope, differential scanning calorimeter, scanning electron microscope, and two‐dimensional wide‐angle X‐ray. Results indicate that both the shear effect and addition of PET fibers greatly influence the morphologies of the iPP matrix. Typical “skin‐core” and oriented crystalline structures (shish‐kebab) may simultaneously be observed in neat iPP and iPP/PET microparts. The presence of PET phases reveals significant nucleation ability for iPP crystallization. High concentrations of PET phases, especially long PET fibers, correspond to rapid crystallization of the iPP matrix. The occurrence of PET microfibrils decreases the content and size of β‐crystals; by contrast, the orientation degree of β‐crystals increases with increasing PET content in the microparts. This result suggests that the existence of the microfibrillar network can retain the ordered clusters and promote the development of oriented crystalline structures to some extent. Copyright © 2015 John Wiley & Sons, Ltd.     

Crystallization of polylactic acid under in situ deformation during nonsolvent‐induced phase separation

In this study, we investigate polylactic acid (PLA) crystallization under in situ biaxial extension in a nonsolvent‐induced phase separation foaming process. Our ternary system consists of PLA, dichloromethane (DCM) as solvent and hexane as nonsolvent. For the first time, the formation of a shish‐kebab crystalline morphology is observed in such a solution‐based foaming process in certain solid–liquid phase separated systems. The formation of shish‐kebabs is described based on the coil‐stretch transition concept. The rapid biaxial deformation caused by macropore growth uniaxially stretches the long chains that are tied with at least two single crystals which eventually leads to the formation of shish structures throughout the polymer‐rich phase. The kebab lamellae then form perpendicularly on the shish cores. The scanning electron microscopy (SEM) observations and our interpretation of the crystallization phenomena are confirmed by differential scanning calorimetry (DSC) analysis. The observation of various crystalline morphologies, particularly shish‐kebabs, and the elucidation of their formation mechanisms contribute to the understanding of phase separation and pore growth as well as crystallization in such polymer–solvent–nonsolvent systems. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1055–1062     

On the origin of the “core‐free” morphology in microinjection‐molded HDPE

This study investigates the morphology of a high‐density polyethylene processed with microinjection molding. Previous work pointed out that a “core‐free” morphology exists for a micropart (150‐μm thick), contrasting with the well‐known “skin‐core” morphology of a conventional part (1.5‐mm thick). Local analyses are now conducted in every structural layer of these samples. Transmission electron microscopy observations reveal highly oriented crystalline lamellae perpendicular to the flow direction in the micropart. Image analysis also shows that lamellae are thinner. Wide‐angle X‐ray diffraction measurements using a microfocused beam highlight that highly oriented shish–kebab morphologies are found through the micropart thickness, with corresponding orientation function close to 0.8. For the macropart, quiescent crystallized morphologies are found with few oriented structures. Finally, the morphology within the micropart is more homogeneous, but the crystalline structures created are disturbed due to the combined effects of flow‐induced crystallization and thermal crystallization during processing. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1470–1478, 2011     

In‐situ microfibrillar PET/iPP blend via slit die extrusion,hot stretching,and quenching: Influence of hot stretch ratio on morphology,crystallization, and crystal structure of iPP at a fixed PET concentration

The in situ microfibrillar blend of poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) was fabricated through a slit die extrusion, hot stretch, and quenching process. The morphological observation indicates that while the unstretched blend appears to be a common incompatible morphology, the hot stretched blends present PET in situ fibers whose characteristics, such as diameter and aspect ratio, are dependent on the hot stretching ratio (HSR). When the HSR is low, the elongated dispersed phase particles are not uniform at all. As the HSR is increased to 16.1, well‐defined PET microfibers were generated in situ, whose diameter is rather uniform and is around 0.6 ～ 0.9 μm. The presence of the PET phase shows significant nucleation ability for crystallization of iPP. Higher HSR corresponds to faster crystallization of the iPP matrix, while as HSR is high up to a certain level, its variation has little influence on the onset and maximum crystallization temperatures of the iPP matrix during cooling from melt. Optical microscopy observation reveals that transcrystalline layers form in the microfibrillar blend, in which the PET microfibers play as the center row nuclei. In the as‐stretched microfibrillar blends, small‐angle X‐ray scattering measurements show that matrix iPP lamellar crystals have the same orientation as PET lamella. The long period of lamellar crystals of iPP is not affected by the presence of PET micofibers. Wide‐angle X‐ray scattering reveals that the β phase of iPP is obtained in the as‐stretched blends, whose concentration increases with the increase of the HSR. This suggests that finer PET microfibers can promote the occurrence of the β phase. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4095–4106, 2004     

Morphological evolution and orientation development of stretched iPP films: Influence of draw ratio

Varying the processing conditions of semicrystalline polymers can produce different morphologies of crystallization, which leads to different properties. There have been extensive studies of flow‐induced crystallization on isotactic polypropylene (iPP) using predominantly shear flow. A stretching method, deduced from extrusion, was introduced to study the morphological evolution of elongation‐induced shish‐kebab crystallization. Different morphologies of the resultant samples with different draw ratios (DRs) were carefully investigated and characterized via differential scanning calorimetry, polarizing light microscopy, scanning electron microscopy, atomic force microscopy, and 2D small‐angle X‐ray scattering. In addition, the degree of orientation of the samples with different DRs was also investigated using the 2D wide‐angle X‐ray scattering technique. The results indicate that the elongation‐induced morphology is strongly dependent on the effective stretching flow expressed in terms of the DR, which is defined as the ratio of rates between take‐up and the extrusion. The spherulite is dominant at low DRs, but it starts to deform along the stretching direction with increasing DR. The shish‐kebab structure in the stretched film, composed of stretched chains (shish) and layered crystalline lamellae (kebabs), increases gradually with an increase in the DR, whereas the spherulites gradually decreased. Furthermore, the overall orientation of α‐phase crystals, expressed by the Hermans orientation parameter, is also found to increase dramatically with the DR, and the rate of increase strongly depends on the DR. The different crystal morphologies are attributed to crystallization induced by different elongations of the stretched iPP films. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1223–1234, 2010     

Wide‐angle X‐ray scattering study of the lamellar/fibrillar transition for a semi‐crystalline polymer deformed in tension in relation with the evolution of volume strain

This work is devoted to the study of the deformation mechanisms of a high‐density polyethylene deformed in tension. Specific treatments were applied to synchrotron wide‐angle X‐ray scattering patterns obtained in situ with the aim of quantifying: (i) the evolution of the apparent crystal sizes during the deformation process, (ii) the reorientation dynamics of the fragmented crystals while aligning their chains along the drawing axis during the establishment of the fibrillar morphology, and (iii) the reorientation dynamics of the amorphous chains. In addition, the volume strain evolution was measured using 3D digital image correlation. The cavitation phenomenon was found to mainly occur during the lamellae fragmentation phase. At the end of the deformation process, when the lamellar structure is destroyed, the fragmented crystals have new degrees of freedom and become free to rotate to align their chains along the drawing axis. Crystal fragmentation is then no longer needed to allow material deformation, and there is no further volume strain increase. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1470–1480     

Structure and properties of polyethylene prepared via low‐frequency vibration‐assisted injection molding

A self‐made low‐frequency vibration‐assisted injection‐molding (VAIM) device was adopted to explore the relationship between mechanical property and morphology for high‐density polyethylene injected moldings. The main processing variables for the VAIM are vibration frequency and vibration pressure amplitude, and tensile properties and morphology were investigated under different VAIM processing conditions with conventional injection molding for comparison. The moldings prepared by VAIM exhibit a very well defined laminated morphology composed of a layered structure with enhanced crystallinity. Increased with vibration frequency at constant vibration pressure amplitude, the shish‐kebab structure is exhibited in the shear layer of the specimen prepared by VAIM, whereas row nucleation lamella exists in the same layer produced by enhanced vibration pressure amplitude at a constant vibration frequency. These oriented structures and enhanced crystallinity, confirmed by scanning electron microscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry, serve to obtain stronger injection moldings. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 13–21, 2005     

Structure development during melt spinning and subsequent annealing of polybutene‐1 fibers

The structural development during the melt spinning and subsequent annealing of polybutene‐1 fibers was studied with in situ wide‐angle X‐ray scattering techniques. The online spinning apparatus consisted of a vertically translating extruder that allowed different distances from the spinneret to the stationary X‐ray beam to be sampled. For all take‐up speeds examined, phase II crystals mainly were formed, with only a small population of phase I crystals existing. As the take‐up speed was increased, the crystallinity also increased, indicating that strain‐induced crystallization prevailed. The crystalline orientations observed online were very close to perfect alignment with the fiber axis. In addition, annealing studies were performed to study aspects of the gradual phase II to phase I transformation as functions of time and prior processing take‐up speed. This transformation was strongly dependent on the take‐up speed. The dependence appears to be connected to local stress enhancement via chains connecting crystallites. The results also seem to indicate that at low take‐up speeds (17 mpm) there is a series connectivity of amorphous and crystalline components in the fiber, whereas at greater take‐up speeds (100 and 250 mpm), the morphology grows into some type of three‐dimensional network, possibly a shish–kebob‐type morphology. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1872–1882, 2000     

Confirmation of a nanohybrid shish‐kebab (NHSK) structure in composites of PET and MWCNTs

Here, the confirmation of an oriented nanohybrid shish‐kebab (NHSK) crystalline structure in a series of composites of poly(ethylene terephthalate) (PET) and multiwall carbon nanotubes (MWCNTs) is reported. The combined use of small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) and thermal analysis has been used to investigate the morphology development in PET‐MWCNT nanocomposites under hot isothermal crystallization conditions. The MWCNTs act as both heterogeneous nucleating agents and surfaces (oriented shish structures) for the epitaxial growth of PET crystallites (kebabs) giving an oriented crystalline morphology. In contrast, the PET homopolymer does not show any residual oriented crystalline morphology during isothermal crystallization but gave a sporadic nucleation of a classic unoriented lamellar structure with slower crystallization kinetics. The results provide a valuable insight into the role of MWCNTs as nanoparticulate fillers in the morphology development and subsequent modification of physical properties in engineering polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 132–137     

Origin of the double melting peaks of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with a high HV content as revealed by in situ synchrotron WAXD/SAXS analyses

We here reported the dual melting behaviors with a large temperature difference more than 50 °C without discernible recrystallization endothermic peak in isomorphous poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV)) with a high HV content of 36.2 mol %, and the structure evolution upon heating was monitored by in situ synchrotron wide‐angle X‐ray diffraction/small‐angle X‐ray scattering (WAXD/SAXS) to unveil the essence of such double endothermic phenomena. It illustrated that the thinner lamellae with the larger unit cell and the thicker crystals having the smaller unit cell were melted around the first low and second high melting ranges, respectively. By analyzing in situ WAXD/SAXS data, and then coupling the features of melting behavior, the evolution of the parameters of both crystal unit cell and lamellar crystals, we proposed that the thinner unstable lamellae possess a uniform structure with HV units total inclusion, and the thicker stable lamellae reflect the sandwich structure with HV units partial inclusion. It further affirmed that the thicker sandwich and thinner uniform lamellae formed during the cooling and subsequent isothermal crystallization processes, respectively. These findings fully verify that it is the change of structure of lamellae rather than the melting/recrystallization that is responsible for double melting peaks of isomorphous P(HB‐co‐36.2%HV), and enhance our understanding upon multiple endothermic behaviors of polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1453–1461     

Stretching temperature and direction dependency of uniaxial deformation mechanism in overstretched polyethylene

In order to elucidate microscopic deformation behavior at different locations in isotropic semicrystalline polymers, the structural evolution of a preoriented high‐density polyethylene sample during tensile deformation at different temperatures and along different directions with respect to the preorientation was investigated by means of combined in situ synchrotron small‐angle X‐ray scattering (SAXS) and wide‐angle X‐ray diffraction (WAXD) techniques. For samples stretched along preorientation, two situations were found: (1) at 30 °C, the sample broke after a moderate deformation, which is accomplished by the slippage of the microfibrils; (2) at 80 and 100 °C, fragmentation of original lamellae followed by recrystallization process was observed resulting in new lamellar crystals of different thickness depending on stretching temperature. For samples stretched perpendicular or 45° with respect to the preorientation, the samples always end up with a new oriented lamellar structure with the normal along the stretching direction via a stress‐induced fragmentation and recrystallization route. The thickness of the final achieved lamellae depends only on stretching temperature in this case. Compared to samples stretched along the preorientation direction, samples stretched perpendicular and 45° with respect to the preorientation direction showed at least several times of maxima achievable stress before macroscopic failure possibly due to the favorable occurrence and development of microdefects in those lamellar stacks with their normal parallel to the stretching direction. This result might have significant consequence in designing optimal procedure to produce high performance polyethylene products from solid state. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 716–726     

Small‐angle X‐ray scattering investigation of carbon nanotube‐reinforced polyacrylonitrile fibers during deformation

Structural changes during deformation in solution‐ and gel‐spun polyacrylonitrile (PAN) fibers with multi‐ and single‐wall carbon nanotubes (CNTs), and vapor‐grown carbon nanofibers were investigated using synchrotron X‐ray scattering. Previously published wide‐angle X‐ray scattering (WAXS) results showed that CNTs deform under load, alter the response of the PAN matrix to stress, and thus enhance the performance of the composite. In this article, we find that the elongated scattering entities that give rise to the small‐angle X‐ray scattering (SAXS) in solution‐spun fibers are the diffuse matrix‐void interfaces that follow the Porod's law, and in gel‐spun fibers these are similar to fractals. The observed smaller fraction of voids in the gel‐spun fibers accounts for the significant increase in the strength of this fiber. The degree of orientation of the surfaces of the voids is in complete agreement with those of the crystalline domains observed in WAXS, and increases reversibly upon stretching in the same way as those of the crystalline domains indicating that the voids are integral parts of the polymer matrix and are surrounded by the crystalline domains in the fibrils. The solution‐spun composite fibers have a larger fraction of the smaller (<10 nm) voids than the corresponding control PAN fibers. Furthermore, the size distribution of the voids during elongation changes greatly in the solution spun PAN fiber, but not so in its composites. The scattered intensity, and therefore the volume fraction of the voids, decreases considerably above the glass transition temperature (T_g) of polymer. Implications of these observations on the interactions between the nanotubes and the polymer are discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2394–2409, 2009     

Structure Evolution upon Uniaxial Drawing Skin‐ and Core‐Layers of Injection‐Molded Isotactic Polypropylene by In Situ Synchrotron X‐ray Scattering

The structure evolution of the oriented layer (skin) and unoriented layer (core) from injection‐molded isotactic polypropylene samples upon uniaxial drawing is probed by in situ synchrotron X‐ray scattering. The X‐ray data analysis approach, called “halo method”, is used to semiquantitatively identify the transformation process of crystal phase upon uniaxial drawing. The results verify the validation of the stress‐induced crystal fragmentation and recrystallization process in the deformation of the injection‐molded samples under different temperatures. Furthermore, the end of strain softening region in the engineering stress‐strain curves explicitly corresponds to the transition point from the stress‐induced crystal fragmentation to recrystallization process. Basically, the skin and core layers of the injection‐molded parts share the similar deformation mechanism as aforementioned. The stretching temperature which dramatically affects the relative strength between the entanglement‐induced tie chains and the adjacent crystalline lamellae determines the crystal structural evolution upon drawing. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1618–1631     

Online wide‐angle X‐ray diffraction/small‐angle X‐ray scattering measurements for the CO2‐laser‐heated drawing of poly(ethylene terephthalate) fiber

Fiber‐structure‐development in the poly(ethylene terephthalate) fiber drawing process was investigated with online measurements of wide‐angle and small‐angle X‐ray scattering with both a high‐luminance X‐ray source and a CO₂‐laser‐heated drawing system. The intensity profile of the transmitted X‐ray confirmed the location of the neck‐drawing point. The diffraction images had a time resolution of several milliseconds, and this still left much room for improvement. Crystal diffraction appeared in the wide‐angle X‐ray images almost instantaneously about 20 ms after necking, whereas a four‐point small‐angle X‐ray scattering pattern appeared immediately after necking. With the elapse of time after necking, the four‐point scattering pattern changed into a meridional two‐point shape. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1090–1099, 2005     

Microstructural evolution underlying the ternary stages of the elastic behaviors for poly(ether‐b‐amide) copolymer elastomers

Three stages of elastic behavior were observed during cyclic deformations for poly(ether‐b‐amide) (PEBA) segmented copolymers based on crystalline hard segments of polyamide 12 (PA12) and amorphous soft segments of poly(tetramethylene oxide) (PTMO). The underlying microstructural evolution was characterized by a combination of in situ Fourier transform infrared spectroscopy (FTIR), wide‐angle X‐ray diffraction (WAXD), and small‐angle X‐ray scattering (SAXS) technologies. The γ–α″ phase transition of crystalline PA12 occurred upon stretching, and the orientation of the α″ phase was less reversible under larger strains. PTMO chain orientation cannot be restored to the initial state, contributing to plastic deformation. Driven by the entropy effect, the strain‐induced crystallization of PTMO can fuse during sample retarding, exerting little influence on the residual strain. For PEBA with a shore D hardness of 35 D, the long period (L) can be restored to the initial L after the sample was unloaded until system fibrillation. The tie molecules between adjacent oriented lamellae can be by drawn out high stress in a PEBA material with a shore D hardness of 40 D, and the relaxation led to a second long period. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 855–864     

Development of a simultaneous measurement system of x‐ray diffraction and raman spectra: Application to structural study of crystalline‐phase transitions of chain molecules

The development of a bench‐top‐type system for simultaneous measurement of X‐ray diffraction and Raman spectra has been made to investigate structural changes in the phase transitions of chain molecules such as polyethylene, n‐alkane, and so forth from various viewpoints. For the X‐ray diffraction measurement an imaging plate or a charge‐coupled device camera was used as a two‐dimensional detector. For the Raman spectral measurement a miniature Raman spectrometer was used with optical fibers for the irradiation of incident laser beams and collection of scattered signals. For example, in the heating process of the n‐C₃₀H₆₂ sample, the phase transition from orthorhombic‐to‐hexagonal lattices could be detected clearly by the X‐ray and Raman measurements. By comparing these two different types of data in detail, an intimate relationship between conformational disordering and rotational motion of molecular chains is detected more clearly than before. Also, similar discussion can be made for the orthorhombic‐to‐hexagonal phase transition of the geometrically constrained polyethylene sample occurring immediately below the melting point. Another example concerns the structural change in the photoinduced solid‐state polymerization of cis,cis‐diethylmuconate single crystal. From the shifts in the X‐ray reflection position and Raman frequency characteristic of the produced polymer, it was found that the molecular deformation of the polymer chains and lattice strain was induced in the early stage of the polymerization reaction. For the ferroelectric‐phase transition of vinylidene fluoride copolymer, the simultaneous measurement was made for collecting triple information of small‐angle and wide‐angle X‐ray scatterings and Raman spectra to know the relationship between the structural change in the crystal lattice and the morphological change in the lamellar stacking mode. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 495–506, 2002; DOI 10.1002/polb.10112