Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048     

Effects of additives and post‐treatment on the thermoelectric performance of vapor‐phase polymerized PEDOT films

Vapor‐phase polymerization (VPP) is an important method for the fabrication of high‐quality conducting polymers, especially poly(3,4‐ethylenedioxythiophene) (PEDOT). In this work, the effects of additives and post‐treatment solvents on the thermoelectric (TE) performance of VPP‐PEDOT films were systematically investigated. The use of 1‐butyl‐3‐menthylinidazolium tetrafluoroborate ([BMIm][BF₄], an ionic liquid) was shown to significantly enhance the electrical conductivity of VPP‐PEDOT films compared with other additives. The VPP‐PEDOT film post‐treated with mixed ethylene glycol (EG)/[BMIm][BF₄] solvent displayed the high power factor of 45.3 μW m^?1 K^?2 which is 122% higher than that prepared without any additive or post‐treatment solvent, along with enhanced electrical conductivity and Seebeck coefficient. This work highlighted the superior effect of the [BMIm][BF₄] additive and the EG/[BMIm][BF₄] solvent post‐treatment on the TE performance of the VPP‐PEDOT film. These results should help with developing the VPP method to fabricate high‐performance PEDOT films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1738–1744     

Bulk cyclopolymerization of 1,2:5,6‐diepithio‐3,4‐di‐O‐methyl‐1,2:5,6‐tetradeoxy‐D‐mannitol with quaternary ammonium salts leading to gel‐free thiosugar polymer

The bulk cyclopolymerization of diepisulfide, 1,2:5,6‐diepithio‐3,4‐di‐O‐methyl‐1,2:5,6‐tetradeoxy‐D ‐mannitol ( 1 ), was studied using R₄N⁺Br^? (R = ? CH₃, C₂H₅, C₃H₇, C₄H₉, and C₇H₁₅) and (C₄H₉)₄N⁺X^? (X = Cl, I, NO₃, and ClO₄) as the initiators. All the bulk polymerizations of 1 using quaternary tetraalkylammonium salts at 90 °C proceeded without gelation even at high conversion to produce gel‐free polymers consisting of 2,5‐anhydro‐1,5‐dithio‐D ‐glucitol (I) as the major cyclic repeating unit along with 1,5‐anhydro‐2,5‐dithio‐D ‐mannitol (II) and the desulfurized acyclic unit (III) as the minor units. The polymerization rate and molar fraction of the I unit increased with the increasing alkyl chain length of the tetraalkylammonium cation and the increasing nucleophilicity of the counteranion. Tetrabutylammonium chloride exhibited the highest catalytic activity and the highest stereoselectivity, that is, the thiosugar polymer with I:II:III = 81:15:4 and a number‐average molecular weight of 31.9 × 10³ was obtained in 85% yield for a polymerization time of 0.5 h. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 965–970, 2002     

Attempted Abstraction of the Halogenides in (HNEt3)[Re(CH3CN)2Cl4] and Crystal Structures of cis‐[Re(CH3CN)2Cl4]·CH3CN and cis‐[Re(NHC(OCH3)CH3)2Cl4]

The abstraction of the halogenide ligands in [Re(CH₃CN)₂Cl₄]^? should result in a solvent‐only stabilized Re^III complex. The reactions of salts of [Re(CH₃CN)₂Cl₄]^? with silver(I) and thallium(I) salts were investigated and the solid‐state structures of cis‐[Re(CH₃CN)₂Cl₄]·CH₃CN and cis‐[Re(NHC(OCH₃)CH₃)₂Cl₄] are described.     

Poly(thieno[3,4‐b]‐1,4‐oxathiane) and poly(3,4‐ethylenedioxythiophene‐co‐thieno[3,4‐b]‐1,4‐oxathiane)/poly(styrene sulfonic sodium): Preparation,characterization, and optoelectronic performance

In this work, the asymmetrical analog of 3,4‐ethylenedioxythiophene (EDOT), thieno[3,4‐b]‐1,4‐oxathiane (EOTT), was synthesized and chemically polymerized first in aqueous solution using poly(styrene sulfonic sodium) (PSS) as the polyelectrolyte to yield poly(thieno[3,4‐b]‐1,4‐oxathiane) (PEOTT)/PSS. As‐formed film exhibited low electrical conductivity (～10^?4 S/cm). Alternatively, EOTT together with EDOT (in different molar ratio of 1:1 and 1:5) was copolymerized and the polymer poly(EOTT‐co‐EDOT)/PSS had electrical conductivity of 10^?1 S/cm. After dimethyl sulfoxide (DMSO) treatment, the electrical conductivity was enhanced to 10⁰ S/cm; however, the conductivity of the above homopolymer was reduced (～10^?5 S/cm). Raman spectroscopy was used to interpret conductivity enhancement or reduction after DMSO treatment. The conductivity decrease of PEOTT/PSS compared to poly(EOTT‐co‐EDOT)/PSS may arise from the conformational change of PEOTT backbone from the quasi‐planar to the distorted planar mode induced by PSS^–/PSSH through ionic interaction. Kinetic studies revealed that the copolymer had high coloration efficiencies (375 cm²/C), low switching voltages (?0.8 to +0.6 V), decent contrast ratios (45%), moderate response time (1.0 s), excellent stability, and color persistence. An electrochromic device employing poly(3‐methylthiophene) and poly(EOTT‐co‐EDOT)/PSS as the anode and cathode materials was also studied. From these results, poly(EOTT‐co‐EDOT)/PSS would be a promising candidate material for organic electronics. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2285–2297     

Conducting core‐sheath nanofibers for electroactive shape‐memory applications

Conducting nanofibers coated with polypyrrole (PPy) and poly(3‐hexylthiophene) (P3HT) exhibiting core‐sheath structures were prepared by vapor‐phase polymerization of the conducting polymers on electrospun polyurethane nanofibers. The synthesis of the conducting polymers was confirmed by Fourier transform infrared spectroscopy and energy‐disperse X‐ray spectroscopy. The surfaces of the PPy‐coated nanofibers were slightly rough, while very smooth and regular surfaces were observed in the case of the P3HT‐coated nanofibers. The initial polymerization rate of PPy was higher than that of P3HT. In addition, the electrical conductivities of the core‐sheath structured nanofiber webs of both types increased with polymerization time. The maximum sheet conductivity of the PPy and P3HT‐coated nanofiber webs was 5 × 10^?3 S/cm and 1 × 10^?2 S/cm, respectively. The webs of the conducting core‐sheath structured nanofibers were effective in generating sufficient electrical heating necessary for harnessing these materials for electroactive shape‐memory‐based applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Characterization of β‐Diketiminate Aluminum Compounds and Their Use in the Ring‐Opening Polymerization of ε‐Caprolactone

Four aluminum alkyl compounds, [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlMe₂] ( 1 ), [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlEt₂] ( 2 ), [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlMe₂] ( 3 ), and [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlEt₂] ( 4 ), bearing β‐diketiminate ligands [CH{(Me)CN‐2,4,6‐MeC₆H₂}]₂ (L¹H) and [CH{(Me)CN‐2‐ⁱPrC₆H₄}]₂ (L²H) were obtained from the reactions of trimethylaluminum, triethylaluminum with the corresponding β‐diketiminate, respectively. All compounds were characterized by ¹H NMR and ¹³C NMR spectroscopy, single‐crystal X‐ray structural analysis, and elemental analysis. Compounds 1 – 4 were found to catalyze the ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) with good activity.     

Benzophenone‐(phenylthio)acetic acid phosphonium salts as initiators of free‐radical photopolymerization of vinyl monomers: Mechanistic studies

The mechanism of the benzophenone‐sensitized photooxidation of phosphonium salts of (phenylthio)acetic acid was studied as a means for understanding how these salts function as coinitiators in the free‐radical photopolymerization of vinyl monomers. Both steady‐state and nanosecond flash photolytic methods were used to determine, in a quantitative manner, the mechanism of primary and secondary photoreactions for three quaternary phosphonium salts containing butyl and/or phenyl groups, i.e., P⁺(C₄H₉)₄, P⁺(C₄H₉)(C₆H₅)₃, and P⁺(C₆H₅)₄. It was found that the initial polymerization rates were the same for all three phoshonium salts of (phenylthio)acetic acid and were equal to those found previously for tetralkyl ammonium salts. The polymerization rates were more than twice the rates found for direct initiation by benzophenone and by the benzophenone‐(phenylthio)acetic acid initiating system. These results correlate well with the large quantum yields of ^?CH₂SC₆H₅ radicals (the main initiating radicals) found in the complementary photochemical investigation. It was found that a detailed knowledge of the photochemical reactions in the photoinitiating systems was critical to understand the kinetics of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8013–8022, 2008     

Engineered Molecular Chain Ordering in Single‐Walled Carbon Nanotubes/Polyaniline Composite Films for High‐Performance Organic Thermoelectric Materials

Single‐walled carbon nanotubes (SWNTs)/polyaniline (PANI) composite films with enhanced thermoelectric properties were prepared by combining in situ polymerization and solution processing. Conductive atomic force microscopy and X‐ray diffraction measurements confirmed that solution processing and strong π–π interactions between the PANI and SWNTs induced the PANI molecules to form a highly ordered structure. The improved degree of order of the PANI molecular arrangement increased the carrier mobility and thereby enhanced the electrical transport properties of PANI. The maximum in‐plane electrical conductivity and power factor of the SWNTs/PANI composite films reached 1.44×10³ S cm^?1 and 217 μW m^?1 K^?2, respectively, at room temperature. Furthermore, a thermoelectric generator fabricated with the SWNTs/PANI composite films showed good electric generation ability and stability. A high power density of 10.4 μW cm^?2 K^?1 was obtained, which is superior to most reported results obtained in organic thermoelectric modules.     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

UHMWPE with short‐chain branches synthesized by alkenyl substituted phenoxy–imine catalysts in ethylene polymerization

The alkenyl substituted phenoxy–imine complexes [2‐C₃H₅‐6‐(2, 3, 5, 6‐C₆F₄H‐N?CH)C₆H₃O]₂TiCl₂ (C₃H₅=? CH₂? CH?CH₂ or ? CH?CH? CH₃) are synthesized and characterized by ¹H NMR, ¹³C NMR, and elemental analysis. When activated by MAO, they show high activity for the polymerization of ethylene to UHMWPE under different conditions (temperatures and polymerization time). Most of the resulting polymers have high molecular weights (>1.0 × 10⁶ g·mol^?1) and high melting points as well as crystallinity. To clarify the effect of the alkenyl group on the catalytic performance and the resultant polymer microstructure, the corresponding saturated complexes of type [2‐C₃H₇?6‐(2, 3, 5, 6‐C₆F₄H‐N?CH)C₆H₃O]₂TiCl₂ where C₃H₇ = –CH₂? CH₂? CH₃ or ? CH(CH₃)₂ were synthesized and tested as catalysts in ethylene polymerization under the same reaction conditions. The microstructure and morphologies of these two species of PE samples were fully compared by the analysis of ¹³C NMR, GPC, DSC, and SEM. As a result, the allyl substituted complex show the highest activity to prepare the highest molecular weight polyethylene of all the catalysts. An interesting feature of the UHMWPE produced by these four catalysts is that they contain only a few short‐chain branches (mainly methyl, isobutyl and 2‐methylhexyl branches) in a low amount (<2.7 branches/1000 C). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3808–3818     

A Three‐Dimensional Porous Organic Semiconductor Based on Fully sp2‐Hybridized Graphitic Polymer

Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three‐dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three‐dimensional organic polymers is challenging. Now, the synthesis of a three‐dimensional π‐conjugated porous organic polymer (3D p‐POP) using catalyst‐free Diels–Alder cycloaddition polymerization followed by acid‐promoted aromatization is presented. With a surface area of 801 m² g^?1, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10^?4 S cm^?1 upon treatment with I₂ vapor, the 3D p‐POP is the first member of a new class of permanently porous 3D organic semiconductors.     

Probing the effect of anion structure on the physical properties of cationic 1,2,3‐triazolium‐based poly(ionic liquid)s

To extensively explore the influence of anion structure on the physical properties of poly(ionic liquid)s (PILs) a series of PILs having main‐chain 1,2,3‐triazolium cations was synthesized via copper(I)‐catalyzed azide‐alkyne 1,3‐dipolar cycloaddition (CuAAC) followed by N‐alkylation with iodomethane and anion metathesis with different metal salts, that is, Li(CF₃SO₂)₂N, Li(CF₃CF₂SO₂)₂N, K(FSO₂)₂N, K(CF₃SO₂)N(CN), Ag(CN)₂N, and sodium 4,5‐dicyano‐1,2,3‐triazolate. To isolate the effect of anion on physical properties of PILs, a common iodide precursor was used to maintain constant the average degree of polymerization (DP_n) and chain dispersity. Detailed structure/properties relationship analyses demonstrated a lack of correlation between anion chemical structure, ionic conductivity, and glass transition temperatures. Among synthesized series, the PIL derivative having bis(trifluoromethylsulfonyl)imide counter anion showed the best compromise in performance: low glass transition temperature (T_g = ?68 °C), high thermal stability (T_onset = 340 °C) and superior ionic conductivity (σ_DC = 8.5 × 10^{? 6} S/cm at 30 °C), which makes it an interesting candidate for various key modern electrochemical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2191–2199     

Facile electrochemical preparation of poly(9,9‐dichlorofluorene), a new polyfluorene derivative as green light emitter

High‐quality poly(9,9‐dichlorofluorene) (PDCF), a new part soluble polyfluorene derivative, was easily synthesized electrochemically by direct anodic oxidation of 9,9‐dichlorofluorene (DCF) in boron trifluoride diethyl etherate (BFEE) containing 15% (by volume) trifluoroacetic acid (TFA). It was hard for DCF to deposit on the electrode in neutral solvents such as CH₃CN system. This methodology may help promotion of researches to reveal unknown properties and applications of polyfluorene materials. PDCF films with conductivity of 3.3 × 10^?2 S cm^?1 obtained from this media show good redox activity and thermal stability. The structure and morphology of the polymer were studied by UV–vis, FTIR, ¹H NMR spectra, and scanning electron microscopy, respectively. The results of quantum chemistry calculations and the spectroscopies of dedoped PDCF indicate that the polymerization of DCF mainly occurs via C₍₂₎ and C₍₇₎ position. Fluorescent spectral studies indicate that PDCF film with high fluorescence quantum yields and photochemical stability is a novel green light emitter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1791–1799, 2010     

Direct functionalization of polyisobutylene by living initiation with α‐methylstyrene epoxide

This article describes the synthesis and characterization of polyisobutylene (PIB) carrying one primary hydroxyl head group and a tertiary chloride end group, [Ph? C(CH₃)(CH₂OH)–PIB–CH₂? C(CH₃)₂Cl] prepared with direct functionalization via initiation. The polymerization of isobutylene was initiated with the α‐methylstyrene epoxide/titanium tetrachloride system. Living conditions were obtained from ?75 to ?50 °C (198–223 K). Low molecular weight samples (number‐average molecular weight ～ 4000 g/mol) were prepared under suitable conditions and characterized by Fourier transform infrared and ¹H NMR spectroscopy. The presence of primary hydroxyl head groups in PIB was verified by both methods. Quantitative Fourier transform infrared with 2‐phenyl‐1‐propanol calibration and ¹H NMR performed on both the hydroxyl‐functionalized PIB and its reaction product with trimethylchlorosilane showed that each polymer chain carried one primary hydroxyl head group. The synthetic methodology presented here is an effective and simple route for the direct functionalization of PIB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1005–1015, 2002     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of electrically conducting poly(o‐/m‐toluidine‐co‐o‐/m‐aminoacetophenone) copolymers

A series of poly(o‐/m‐toluidine‐co‐o‐/m‐aminoacetophenone) copolymers combining the features of high conductivity and processibility are synthesized and characterized by a number of techniques including ¹H NMR; thermogravimetry; IR, Raman, and UV–visible spectroscopy; scanning electron microscopy; and X‐ray diffraction. The copolymers are synthesized by the emulsion and inverse emulsion methods using conventional ammonium persulfate and a new oxidant, benzoyl peroxide, respectively. The influence of the polymerization conditions such as the monomer feed ratios, solvent, and the nonsolvent is investigated. The composition of the resulting copolymers is determined by ¹H NMR analysis. The conductivity of the copolymers varies with the aminoacetophenone content in the feed and the polymerization conditions. It is interesting that the conductivity of the copolymers is higher than that of the corresponding homopolymers. The results are rationalized on the basis of the effect of the ? COCH₃ substituent on the polymer structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4300–4310, 2004     

Highly stable polyoxometalate‐resorcin[4]arene‐based inorganic‐organic complexes for catalytic oxidation desulfurization

Self‐assembly of a resorcin[4]arene‐based ligand (TMR4A) with metal salts and H₃PMo₁₂O₄₀·xH₂O offers two isostructural complexes, namely, [Ni₂Cl(TMR4A)₂(CH₃CN)₂]·[PMo₁₂O₄₀]·4CH₃CN ( 1 ) and [Co₂Cl(TMR4A)₂(CH₃CN)₂]·[PMo₁₂O₄₀]·4CH₃CN ( 2 ). In both 1 and 2 , one Cl^? anion bridges two metal cations, and each metal cation is further chelated by four 2‐mercaptopyridine N‐oxide groups of one TMR4A, producing a [M₂Cl(TMR4A)₂]³⁺ dimer (M = Ni or Co). The negative [PMo₁₂O₄₀]^3? as a counter‐anion balances the positive charge. Markedly, 1 and 2 exhibit high stability in aqueous solutions with different pH values and in organic solvents. Remarkably, the efficient heterogeneous catalytic capability for oxidative desulfurization was studied by suing 1 and 2 as recycled catalysts. Moreover, the electrochemical behaviors of the two compounds were discussed as well.     

新的杯[4]芳烃衍生物通过缔合乙腈进行自插入的X-射线衍射和密度泛函理论研究

合成和表征了一个新的杯[4]芳烃衍生物，11,23-二羟亚胺甲基-25,27-二羟基-26,28-二丙氧基杯[4]芳烃 (B)及其与乙腈生成的组成为B·2CH₃CN的化合物。¹H NMR显示，在B·2CH₃CN中B采取锥型构象，X-射线衍射分析确证在溶液中所发现的构象。在晶格网络中存在着B·2CH₃CN以二聚体形式的自插入现象。在B3LYP/6-311G(d)水平上计算了该自插入二聚体中的非共价相互作用能，并对基集叠加误差进行了校正。在二聚体中的B·2CH₃CN，一个CH₃CN通过与羟亚胺基形成氢键使之稳定，结合能为–5.02 kJ·mol^-1，另一个CH₃CN则通过与另一个羟亚胺基形成氢键以及与另一B·2CH₃CN中B苯环空腔间的C–H···π相互作用使之稳定，结合能分别为–14.23 kJ·mol^-1和–3.77 kJ·mol^-1。自插入的驱动能为–7.54 kJ·mol^-1。     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009