A Three-Dimensional Porous Organic Semiconductor Based on Fully sp2-Hybridized Graphitic Polymer

Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three-dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three-dimensional organic polymers is challenging. Now, the synthesis of a three-dimensional π-conjugated porous organic polymer (3D p-POP) using catalyst-free Diels–Alder cycloaddition polymerization followed by acid-promoted aromatization is presented. With a surface area of 801 m² g⁻¹, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10⁻⁴ S cm⁻¹ upon treatment with I₂ vapor, the 3D p-POP is the first member of a new class of permanently porous 3D organic semiconductors.     

Bismuth Interfacial Doping of Organic Small Molecules for High Performance n‐type Thermoelectric Materials

Development of chemically doped high performance n‐type organic thermoelectric (TE) materials is of vital importance for flexible power generating applications. For the first time, bismuth (Bi) n‐type chemical doping of organic semiconductors is described, enabling high performance TE materials. The Bi interfacial doping of thiophene‐diketopyrrolopyrrole‐based quinoidal (TDPPQ) molecules endows the film with a balanced electrical conductivity of 3.3 S cm^?1 and a Seebeck coefficient of 585 μV K^?1. The newly developed TE material possesses a maximum power factor of 113 μW m^?1 K^?2, which is at the forefront for organic small molecule‐based n‐type TE materials. These studies reveal that fine‐tuning of the heavy metal doping of organic semiconductors opens up a new strategy for exploring high performance organic TE materials.     

Ionic metallo‐Schiff base polymers of VO2+, Zn2+ and Cu2+: Synthesis,characterization and solid‐state conductivity

The viologen‐type dialdehyde of [N,N′‐bis(methylsalicylaldehyde)‐4,4′‐bipyridinium] dichloride (DA) was synthesized by reacting 5‐chloromethylsalicylaldehyde and 4,4′‐bipyridine. Then a new polymeric Schiff base ligand (PSBL) was synthesized by the condensation reaction of ethylenediamine and DA in methanol under reflux conditions. Afterwards, new ionic metallo‐Schiff base polymers (IMSPs) were synthesized by reacting PSBL with VO(acac)₂, ZnCl₂ and CuCl₂ via coordination chelation. DA, PSBL and IMSPs were characterized using various analytical methods and spectral techniques. The solid‐state electrical conductivities of PSBL and IMSPs were studied. The electrical conductivity of these polymers at 300 K ranged from 1.30 × 10^?5 to 4.52 × 10^?10 Ω^?1 m^?1, which means they are potential organic and metallo‐organic semiconductors.     

Cost‐Effective,High‐Performance Porous‐Organic‐Polymer Conductors Functionalized with Sulfonic Acid Groups by Direct Postsynthetic Substitution

We demonstrate the facile microwave‐assisted synthesis of a porous organic framework 1 and the sulfonated solid ( 1S ) through postsubstitution. Remarkably, the conductivity of 1S showed an approximately 300‐fold enhancement at 30 °C as compared to that of 1 , and reached 7.72×10^?2 S cm^?1 at 80 °C and 90 % relative humidity. The superprotonic conductivity exceeds that observed for any conductive porous organic polymer reported to date. This material, which is cost‐effective and scalable for mass production, also revealed long‐term performance over more than 3 months without conductivity decay.     

Water‐Soluble Three‐Dimensional Polymers: Non‐Covalent and Covalent Synthesis and Functions†

Water‐soluble three‐dimensional (3D) polymers are structurally ideal for the construction of ordered porous materials for in‐situ and tunable loading and release of guests. For many years, studies on ordered porous materials have been confined to crystalline solids. Since 2014, self‐assembly has been developed as a robust strategy for the preparation of water‐soluble 3D polymers that possess defined and intrinsic porosity. Through the encapsulation of cucurbit[8]uril for aromatic dimers, ordered diamondoid supramolecular organic frameworks can be assembled from tetrahedral monomers. With [Ru(bipy)₃]²⁺‐derived octahedral complexes as precursors, cubic supramolecular metal‐organic frameworks have been assembled. One supramolecular organic framework has also been utilized to prepare the first homogeneous covalent organic framework through the [2+2] alkene cycloaddition, whereas the quantitative formation of the hydrazone bonds can be utilized to synthesize flexible porous organic frameworks. The new water‐soluble ordered and flexible polymeric frameworks are able to include drugs and biomacromolecules to accomplish in situ loading and intracellular delivery and to enrich photosensitizers and catalysts to enhance discrete visible light‐induced reactions. This review highlights the advances.     

An A‐D‐A′‐D‐A Conjugated Molecule Entailing Diazapentalene Unit for an n‐Type Organic Semiconductor

Conjugated molecules with low lying LUMO levels are demanding for the development of air stable n‐type organic semiconductors. In this paper, we report a new A‐D‐A′‐D‐A conjugated molecule ( DAPDCV ) entailing diazapentalene (DAP) and dicyanovinylene groups as electron accepting units. Both theoretical and electrochemical studies manifest that the incorporation of DAP unit in the conjugated molecule can effectively lower the LUMO energy level. Accordingly, thin film of DAPDCV shows n‐type semiconducting behavior with electron mobility up to 0.16 cm²?V^?1?s^?1 after thermal annealing under N₂ atmosphere. Moreover, thin film of DAPDCV also shows stable n‐type transporting property in air with mobility reaching 0.078 cm²?V^?1?s^?1.     

A Dual‐Ligand Porous Coordination Polymer Chemiresistor with Modulated Conductivity and Porosity

Single‐ligand‐based electronically conductive porous coordination polymers/metal–organic frameworks (EC‐PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π‐conjugated EC‐MOF containing copper units with mixed trigonal ligands was developed: Cu₃(HHTP)(THQ) (HHTP=2,3,6,7,10,11‐hexahydrotriphenylene, THQ=tetrahydroxy‐1,4‐quinone). The modulated conductivity (σ≈2.53×10^?5 S cm^?1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m² g^?1) of the Cu₃(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.     

Two‐dimensional π‐conjugated metal‐organic framework with high electrical conductivity for electrochemical sensing

A two‐dimensional π‐conjugated metal‐organic framework (MOF) with long‐range delocalized electrons has been prepared and applied as modified electrode material without further post‐modification. The MOF (Cu₃(HHTP)₂) is composed of Cu(II) centers and a redox‐active linker (2,3,6,7,10,11‐hexahydroxytriphenylene, HHTP). Compared to most MOFs, Cu₃(HHTP)₂ displays higher electrical conductivity and charge storage capacity owing to the collective effect of metal ions and aromatic ligands with π–π conjugation. In order to confirm the superior properties of this material, the electrochemical detection of dopamine (DA) was conducted and the satisfactory results were obtained. The currents increase linearly with the concentration of DA in the range 5.0 × 10^?8 to 2.0 × 10^?4 M with a detection limit of 5.1 nM. Furthermore, Cu₃(HHTP)₂ presents high selectivity and applicability in serum samples for electrochemical DA sensing. Overall, this material has excellent potential as a promising platform for establishing an MOF‐based electrochemical sensor.     

MnFe2O4 Nanocrystals Wrapped in a Porous Organic Polymer: A Designed Architecture for Water‐Splitting Photocatalysis

A novel MnFe₂O₄–porous organic polymer (POP) nanocomposite was synthesized by a facile hydrothermal method and using the highly cross‐linked N‐rich benzene–benzylamine POP. The nanocomposite presented highly efficient photocatalytic performance in the hydrogen evolution reaction (HER) from pure water without addition of any sacrificial agent under one AM 1.5 G sunlight illumination. A photocatalytic activity of 6.12 mmol h^?1 g^?1 was achieved in the absence of any noble metal cocatalyst, which is the highest H₂ production rate reported for nonprecious metal catalysts. The photocatalytic performance of MnFe₂O₄‐POP could be attributed to the intrinsic synergistic effects of manganese ferrite (MnFe₂O₄) nanoclusters interacting with the nitrogen dopant POP with a unique mesoporous nanoarchitecture and spatially confined growth of MnFe₂O₄ in the interconnected POP network, leading to high visible‐light absorption with fast electron transport.     

Compact Coupled Graphene and Porous Polyaryltriazine‐Derived Frameworks as High Performance Cathodes for Lithium‐Ion Batteries

It is highly desirable to develop electroactive organic materials and their derivatives as green alternatives of cathodes for sustainable and cost‐effective lithium‐ion batteries (LIBs) in energy storage fields. Herein, compact two‐dimensional coupled graphene and porous polyaryltriazine‐derived frameworks with tailormade pore structures are fabricated by using various molecular building blocks under ionothermal conditions. The porous nanosheets display nanoscale thickness, high specific surface area, and strong coupling of electroactive polyaryltriazine‐derived frameworks with graphene. All these features make it possible to efficiently depress the dissolution of redox moieties in electrolytes and to boost the electrical conductivity of whole electrode. When employed as a cathode in LIBs, the two‐dimensional porous nanosheets exhibit outstanding cycle stability of 395 mAh g^?1 at 5 A g^?1 for more than 5100 cycles and excellent rate capability of 135 mAh g^?1 at a high current density of 15 A g^?1.     

Face‐Capped M4L4 Tetrahedral Metal–Organic Cage: Iodine Capture and Release,Ion Exchange,and Electrical Conductivity

An M⁴L₄ type metal–organic cage (MOC‐19) has been synthesized from the one‐pot reaction of tri(pyridinylmethylene)phenylbenzeneamine (TPBA) with hydrated Zn(ClO₄)₂ under mild conditions and characterized by single‐crystal X‐Ray diffraction. Iodine capture studies show that the porous crystals of MOC‐19 exhibit a versatile behavior to accumulate iodine species not only in vapor (for I₂) but also in solution (for I₂ and I₃^?), and anion‐exchange experiments indicate the capacity to extract IO₃^? anions from aqueous solution. Enrichment of iodine species from KI/I₂ aqueous solution proceeds facilely, revealing a pseudo‐second‐order kinetics of I₃^? adsorption. Furthermore, the electrical conductivity of MOC‐19 single crystals could be significantly altered by I₂ inclusion.     

Superior Electrical Conductivity in Hydrogenated Layered Ternary Chalcogenide Nanosheets for Flexible All‐Solid‐State Supercapacitors

As the properties of ultrathin two‐dimensional (2D) crystals are strongly related to their electronic structures, more and more attempts were carried out to tune their electronic structures to meet the high standards for the construction of next‐generation smart electronics. Herein, for the first time, we show that the conductive nature of layered ternary chalcogenide with formula of Cu₂WS₄ can be switched from semiconducting to metallic by hydrogen incorporation, accompanied by a high increase in electrical conductivity. In detail, the room‐temperature electrical conductivity of hydrogenated‐Cu₂WS₄ nanosheet film was almost 10¹⁰ times higher than that of pristine bulk sample with a value of about 2.9×10⁴ S m^?1, which is among the best values for conductive 2D nanosheets. In addition, the metallicity in the hydrogenated‐Cu₂WS₄ is robust and can be retained under high‐temperature treatment. The fabricated all‐solid‐state flexible supercapacitor based on the hydrogenated‐Cu₂WS₄ nanosheet film shows promising electrochemical performances with capacitance of 583.3 F cm^?3 at a current density of 0.31 A cm^?3. This work not only offers a prototype material for the study of electronic structure regulation in 2D crystals, but also paves the way in searching for highly conductive electrodes.     

Bottom‐Up On‐Surface Synthesis of Two‐Dimensional Graphene Nanoribbon Networks and Their Thermoelectric Properties

Graphene, the one‐atom‐thick two‐dimensional (2D) carbon material, has attracted tremendous interest in both academia and industry due to its outstanding electrical, mechanical, and thermal properties. For electronic applications, the challenging task is to make it as a semiconductor. The bottom‐up synthesis of semiconducting one‐dimensional (1D) nanometer‐wide graphene strips, namely, graphene nanoribbons (GNRs), has attracted much attention owing to its promising electronic, optical, and magnetic properties. In this regard, we report the fabrication of cove‐type 2D GNR networks (GNNs) via the interconnection of 1D self‐assembled GNRs on the surface of Au(111). The cove‐type 2D GNRs networks (GNNs) were fabricated from the GNR, 5‐CGNR‐1‐1 , synthesized using the precursor of DBSP . Annealing of high‐density self‐assembled GNRs on the surface of Au(111) through two‐zone chemical vapour deposition (2Z CVD) successfully generated a 2D interconnected structure with high yield via the fusion and ladder coupling reactions of GNR chains. In order to validate the later fusion reaction, we have also synthesized the GNR, 7‐AGNR‐1‐1 , using the precursor of DBBA . The GNNs, which consist of hybridized metallic‐like and semiconducting GNRs, are a new class of carbon‐based materials. Further, we applied this material for thermoelectric (TE) applications and found a very low cross‐plane thermal conductivity of 0.11 Wm^?1 K^?1, which is one of the lowest value among the carbon‐based materials as well as inorganic semiconductors, while maintaining the cross‐plane electrical conductivity of 188 S m^?1.     

Solvent‐Vapor‐Induced Reversible Single‐Crystal‐to‐Single‐Crystal Transformation of a Triphosphaazatriangulene‐Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha‐Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π‐conjugated framework, which enables the stimuli‐responsive reversible transformation of [Cu(HL)(DMSO)?(MeOH)]_n, a 3D‐MOF that exhibits reversible sorption characteristics, into (H₃L?0.5 [Cu₂(OH)₄?6 H₂O] ?4 H₂O), a 1D‐columnar assembled proton‐conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10^?3 S cm^?1 at 95 % relative humidity and 60 °C.     

A two‐dimensional organic–inorganic hybrid perovskite‐type semiconductor: poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]]

Recently, with the prevalence of `perovskite fever', organic–inorganic hybrid perovskites (OHPs) have attracted intense attention due to their remarkable structural variability and highly tunable properties. In particular, the optical and electrical properties of organic–inorganic hybrid lead halides are typical of the OHP family. Besides, although three‐dimensional hybrid perovskites, such as [CH₃NH₃]PbX₃ (X = Cl, Br or I), have been reported, the development of new organic–inorganic hybrid semiconductors is still an area in urgent need of exploration. Here, an organic–inorganic hybrid lead halide perovskite is reported, namely poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]], {(C₅H₁₆NP)[PbBr₄]}_n, in which an organic cation is embedded in inorganic two‐dimensional (2D) mesh layers to produce a sandwich structure. This unique sandwich 2D hybrid perovskite material shows an indirect band gap of ～2.700 eV. The properties of this compound as a semiconductor are demonstrated by a series of optical characterizations and indicate potential applications for optical devices.     

A 3D Nanostructured Hydrogel‐Framework‐Derived High‐Performance Composite Polymer Lithium‐Ion Electrolyte

Solid‐state electrolytes have emerged as a promising alternative to existing liquid electrolytes for next generation Li‐ion batteries for better safety and stability. Of various types of solid electrolytes, composite polymer electrolytes exhibit acceptable Li‐ion conductivity due to the interaction between nanofillers and polymer. Nevertheless, the agglomeration of nanofillers at high concentration has been a major obstacle for improving Li‐ion conductivity. In this study, we designed a three‐dimensional (3D) nanostructured hydrogel‐derived Li_0.35La_0.55TiO₃ (LLTO) framework, which was used as a 3D nanofiller for high‐performance composite polymer Li‐ion electrolyte. The systematic percolation study revealed that the pre‐percolating structure of LLTO framework improved Li‐ion conductivity to 8.8×10^?5 S cm^?1 at room temperature.     

Controlled Construction of Metal–Organic Frameworks: Hydrothermal Synthesis,X‐ray Structure,and Heterogeneous Catalytic Study

The role of pH in the formation of metal–organic frameworks (MOFs) has been studied for a series of magnesium‐based carboxylate framework systems. Our investigations have revealed the formation of five different zero‐dimensional (0D) to three‐dimensional (3D) ordered frameworks from the same reaction mixture, merely by varying the pH of the medium. The compounds were synthesized by the hydrothermal method and characterized by single‐crystal X‐ray diffraction. Increase of the pH of the medium led to abstraction of the imine hydrogen from the ligand and a concomitant increase in the OH^? ion concentration in the solution, facilitating the construction of higher dimensional framework compounds. A stepwise increase in pH resulted in a stepwise increase in the dimensionality of the network, ultimately leading to the formation of a 3D porous solid. A gas adsorption study of the 3D framework compound confirmed its microporosity with a BET surface area of approximately 450 m² g^?1. Notably, the 3D framework compound catalyzes aldol condensation reactions of various aromatic aldehydes with acetone under heterogeneous conditions.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Chemical and Structural Stability of Zirconium‐based Metal–Organic Frameworks with Large Three‐Dimensional Pores by Linker Engineering

The synthesis of metal–organic frameworks with large three‐dimensional channels that are permanently porous and chemically stable offers new opportunities in areas such as catalysis and separation. Two linkers (L1=4,4′,4′′,4′′′‐([1,1′‐biphenyl]‐3,3′,5,5′‐tetrayltetrakis(ethyne‐2,1‐diyl)) tetrabenzoic acid, L2=4,4′,4′′,4′′′‐(pyrene‐1,3,6,8‐tetrayltetrakis(ethyne‐2,1‐diyl))tetrabenzoic acid) were used that have equivalent connectivity and dimensions but quite distinct torsional flexibility. With these, a solid solution material, [Zr₆O₄(OH)₄(L1)_2.6(L2)_0.4]?(solvent)_x, was formed that has three‐dimensional crystalline permanent porosity with a surface area of over 4000 m² g^?1 that persists after immersion in water. These properties are not accessible for the isostructural phases made from the separate single linkers.     

Conductance Switch of a Bromoplumbate Bistable Semiconductor by Electron‐Transfer Thermochromism

Electron‐transfer (redox) thermochromism was successfully used for switching the conductance of semiconductors, by introducing a thermally active organic component into an inorganic semiconducting framework. A moisture‐resistant semiconductor {(MV)₂[Pb₇Br₁₈]}_n (MV²⁺=methyl viologen cation) has been prepared through an in situ synthetic method for MV²⁺. It features a rare 3D haloplumbate open framework and unprecedented electron‐transfer thermochromic behavior in haloplumbates. The electrical conductivity of this compound dropped significantly after coloration and restored after decoloration, which was satisfactorily explained by valence band XPS and theoretical data. This work not only offers a new approach to modify electrical properties of semiconductors without altering components or structures, but may lead to the development of over‐temperature color indicators, circuit overload protectors or photovoltaic materials.