Synthesis and characterization of novel π‐conjugated polymers with phosphole ring derivatives

Novel π‐conjugated polymers ( 8 – 10 ) were prepared by the palladium‐catalyzed Sonogashira coupling reaction of three kinds of phosphole‐ring‐containing monomers with 2,5‐dihexyloxyl‐1,4‐diethynylbenzene. The obtained polymers ( 8 – 10 ) were regioregulated with the 2,5‐substituted phosphole ring in the polymer main chain and characterized with ¹H, ¹³C, and ³¹P NMR and FTIR. Polymers 8 – 10 were found to have an extended π‐conjugated system according to the results of UV–vis absorption spectra. In the fluorescence emission spectra of 8 – 10 , moderate emission peaks were observed in the visible blue‐to‐green region. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2867–2875, 2007     

Incorporation of a conjugated side‐chain in regioregular polythiophenes: Chiroptical properties and selective oxidation

The synthesis, aggregation, and optical properties of a chiral, regioregular polythiophene, substituted with a conjugated substituent, are described. The polymer was prepared using a Stille coupling reaction. The fact that the side‐chain contributes to the absorption (UV‐vis), emission (fluorescence), and redox behavior (cyclic voltammetry) of the material demonstrates that the substituent contributes to the electronic properties. It was shown that the conjugated side‐chain chirally stacks in conditions in which the polymer backbone aggregates, which demonstrates the ability of conjugated polymers to induce a (chiral) lamellar organization of conjugated moieties, present in their side‐chain. The aggregation of both the side‐chain and the backbone was monitored using UV‐vis and CD spectroscopy. Finally, it is shown that the conjugated side‐chain can selectively be oxidized, without oxidizing the polythiophene backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1891–1900, 2009     

Synthesis and double doping behavior of a poly(p‐phenylenevinylene)s bearing conjugated side chains

A poly(p‐phenylenevinylene) derivative bearing conjugated side chains (polyCPV) was synthesized by Migita‐Kosugi‐Stille type coupling polycondensation reaction. This polymer contains phenylenevinylene units in both the main chain and the side chains. UV–vis absorption and fluorescence emission spectroscopies revealed a well‐developed π‐conjugation of the polyCPV. The absorption band of the polymer was extended to long wavelengths. A fluorescent emission maximum of polyCPV is located at considerably longer wavelengths than that of the conjugated side chain monomer. Electron spin resonance measurements of polyCPV confirmed generation of charge species in both the main chain and the side chains via iodine doping. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of highly luminescent organoboron polymers connected by bifunctional 8‐aminoquinolate linkers

New organoboron aminoquinolate‐based polymers linked by π‐conjugated bridge were prepared by Sonogashira–Hagihara coupling of organoboron aminoquinolate‐based bisiodo monomers bearing biphenyl or bithiophene moiety with 1,4‐diethynylbenzene derivatives. Tetracoordination states of boron atoms in the obtained polymers were confirmed by ¹¹B NMR spectroscopy, and they were also characterized by ¹H NMR and IR spectroscopies and size‐exclusion chromatography. Their optical properties were studied by UV–vis absorption and photoluminescence spectroscopies. In the region above 400 nm, the polymers prepared from 1,4‐diethynyl‐2,5‐dioctyloxybenzene showed bathochromic shifts when compared with those prepared from 1.4‐diethynyl‐2‐perfluorooctyl‐5‐trifluoromethylbenzene. The polymers with biphenyl moiety showed higher absolute fluorescence quantum yields (?_F = 0.28 and 0.65), whereas those with bithiophene moiety led to decreasing of the low quantum yields (?_F = 0.19 and 0.00). The density‐functional theory (DFT) and time‐dependent–DFT calculations of model compounds corresponding to the polymers were in good agreement with the results from UV–vis properties. The calculations revealed that the electronic structure of the polymer with bithiophene moiety is different from that with biphenyl moiety, and predicted the electron transfer from the bithiophene moiety to the π‐extended quinoline moiety in transition state. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3693–3701, 2010     

[2.2]paracyclophane‐based through‐space conjugated polymers with fluorescence quenchers

New [2.2]paracyclophane‐based through‐space conjugated polymers containing fluorescence quenchers such as anthraquinone and ferrocene units at the polymer termini were designed and synthesized. Their optical properties were investigated in detail. Fluorescence emission from the stacked π‐electron systems was effectively quenched by the stacked π‐electron systems at the polymer termini due to the energy and electron transfer through a single polymer chain; thus, the polymers acted as the molecular wire. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photophysical characteristics of soluble oligo(p‐phenylenevinylene)–fullerene dyad

The fact that C₆₀ is a good acceptor has stimulated interest in covalently linked complexes, including polymers and oligomers. Photoinduced charge transfer in these systems has great potential for use in photovoltaic devices. In this study, an alternating conjugated oligomer of alkylated carbazole and dialkoxyl‐substituted phenylene, with pendant C₆₀ moieties, (PPV‐AFCAR) was prepared and characterized. The excited‐state properties of PPV–AFCAR were investigated with steady‐state spectroscopy and lifetime measurements. After photoexcitation, photoinduced energy transfer from the oligomer chain to the pendant moiety occurred in great proportion, but a charge‐separation process did not. Whether the energy‐transfer process was measurable or not depended on the system temperature. At 77 K, a quantum yield of more than 50% for energy transfer was found by the fitting of a linear combination of the excitation spectra of the precursor oligomer, the alternating conjugated oligomer of alkylated carbazole and dialkoxyl‐substituted phenylene PPV–ACAR, and the absorption spectra of C₆₀. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3981–3988, 2001     

Synthesis and characterization of highly stable blue‐light‐emitting hyperbranched conjugated polymers

Polyfluorene homopolymer ( P1 ) and its carbazole derivatives ( P2 – P4 ) have been prepared with good yield by Suzuki coupling polymerization. P2 is an alternating copolymer based on fluorene and carbazole; P3 is a hyperbranched polymer with carbazole derivative as the core and polyfluorene as the long arms; P4 is a hyperbranched polymer with carbazole derivative as the core and the alternating fluorene and carbazole as the long arms. These polymers show highly thermal stability, and their structures and physical properties are studied using gel permeation chromatography, ¹H NMR, ¹³C NMR, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetry, UV–vis absorption, photoluminescence, and cyclic voltammetry (CV). The influence of the incorporation of carbazole and the hyperbranched structures on the thermal, electrochemical, and electroluminescent properties has been investigated. Both carbazole addition and the hyperbranched structure increase the thermal and photoluminescent stability. The CV shows an increase of the HOMO energy levels for the derivatives, compared with polyfluorene homopolymer ( P1 ). The EL devices fabricated by these polymers exhibit pure blue‐light‐emitting with negligible low‐energy emission bands, indicating that the hyperbranched structure has a strong effect on the PLED characteristics. The results imply that incorporating carbazole into polyfluorene to form a hyperbranched structure is an efficient way to obtain highly stable blue‐light‐emitting conjugated polymers, and it is possible to adjust the property of light‐emitting polymers by the amount of carbazole derivative incorporated into the polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 790–802, 2008     

Fluorescence Study of Energy Transfer in PMMA Polymers with Pendant Oligo‐Phenylene‐Ethynylenes

A spectroscopic characterization of polymers containing rigid π‐conjugated oligo(phenyleneethynylene) chromophores as well as oligo(phenyleneethynylene) and methyl methacrylate is presented. The polymers exhibit molar masses of up to 15 000 g mol^?1 and a degree of polymerization between 22 and 80. Emission measurements of the monomeric and polymeric species show that radiative as well as nonradiative rates are influenced by the degree of polymerization due to intramolecular interactions of chromophores pendant to the polymer backbone. Time‐resolved emission anisotropy measurements suggest that energy migrates within the polymers. Steady‐state emission anisotropy measurements also point to energy migration. Additionally, two oligo(phenyleneethynylene)s with different sizes of the conjugated system are copolymerized in order to enable energy trapping due to energy transfer. The shortened energy‐donor fluorescence lifetime within the donor–acceptor copolymers suggest energy transfer. Depending on the degree of polymerization, dispersion of the donor fluorescence lifetime is observed.     

Blue emitting side-chain pendant 4-hydroxy-1,3-thiazoles in polystyrenes synthesized by RAFT polymerization

Blue emitting dyes bearing a luciferin analogous chromophore were attached to a polystyrene backbone. For this purpose, 4-hydroxy-1,3-thiazoles were functionalized with a styrene unit and polymerized using the reversible addition–fragmentation chain transfer (RAFT) polymerization technique. Two different chain transfer agents were investigated and one monomer was studied in terms of its kinetic behavior. The polymerization kinetics are presented and discussed in detail, showing a controlled polymerization behavior, resulting in well-defined copolymers with polydispersity indices below 1.2. The obtained polymers were characterized by size exclusion chromatography (SEC), ¹H NMR, MALDI-TOF MS and UV–vis absorption and fluorescence spectroscopy. In addition, the UV–vis absorption and emission behavior was investigated in thin films.     

A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,two‐photon absorption,and optical power limiting of new linear and hyperbranched conjugated polyynes based on bithiazole and triphenylamine

Two new linear and hyperbranched conjugated polymers P1 and P2 have been synthesized by Sonogashira coupling reaction, in which the main chain consists of bithiazole moieties as electron acceptors and triphenylamino groups as donors. The conjugated polymers were characterized by TGA, UV–vis absorption, fluorescence emission, electrochemical cyclic voltammetry, and two‐photon absorption measurements. They exhibited excellent solubility in organic solvents and high thermal stability (5% of weight loss at 299 °C). The two‐photon absorption cross sections (σ) measured by the open aperture Z‐scan technique using 140 femtosecond (fs) pulse were determined to be 1014 and 552 GM per repeating unit for P1 and P2 , respectively. This result shows that the σ of linear conjugated P1 is higher than that of hyperbranched P2 , indicating that the linear polymer offers better intramolecular charge transfer ability. In THF, P1 and P2 exhibit intense frequency up‐converted fluorescence under the excitation of 140 fs pulses at 800 nm with the peaks located at 580 and 548 nm, respectively. Meanwhile, the optical limiting behaviors for the polymers were studied by using a focused 800 nm laser beam of 140 fs duration. It was found that these polymers also exhibit good optical‐limiting properties and make them potential candidates for optical limiters in the photonic fields. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel mesogen‐jacketed poly(p‐phenylenevinylene) derivatives bearing oxadiazole pendants: Design,synthesis, and optoelectronic properties

1,3,4‐oxadiazole moieties were laterally linked to the phenyl rings via a short ? OCH₂ spacer and a series of novel poly(p‐phenylenevinylene) derivatives have been successfully synthesized through Horner–Witting–Emmons coupling reaction. The structures and properties of the monomers and the resulting conjugated polymers were characterized by nuclear magnetic resonance spectroscope, Fourier transform infrared, elemental analysis, gel permeation chromatography, thermogravimetric analysis, UV–vis absorption (UV) spectroscopy, photoluminescence spectroscopy and cyclic voltammetry. The UV spectra at solution state was similar to what's observed at film state while the PL spectra at film state had a red shift from 19 to 28 nm compared with the results at solution state, which implied that the unique bulky jacketed structure containing oxadiazole unit of these copolymers could effectively suppress π‐stacking/aggregation. LUMO levels of these polymers varied from ?3.44 to ?3.63 eV with increasing content of oxadiazole units, which facilitated electron injection. PLEDs with the configuration of ITO/PEDOT/Polymer/TPBI (15 nm)/LiF (1 nm)/Al (100 nm) were fabricated, which emit a yellowish green light around 540 and 570 nm with a maximum brightness of 1074.7 cd/m² and luminous efficiency of 0.108 cd/A. The introduction of the unique bulky OXD unit into PPVs at a low molar content largely improved the electroluminescence properties of PPV. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7173–7186, 2008     

Construction of diads and triads copolymer systems containing perylene,porphyrin, and/or fullerene blocks

A series of conjugated copolymers containing perylene, porphyrin, and/or fullerene units on the main chain have been synthesized. The structures and photophysical properties of polymers were characterized by FTIR, NMR, UV–vis, and fluorescence spectroscopy, gel permeation chromatography, and cyclic voltammetry. The photoinduced charge transfer properties of the films were also measured by a three‐electrode cell technique. A rapid, steady, and reproducible cathodic photocurrent response for each polymer was produced when the film was irradiated by a white light. The SEM and TEM images displayed the aggregation superstructures of the polymers. In chloroform, polySPeZnP₂F could form a large quantity of spherical nanoparticles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5863–5874, 2006     

Direct synthesis of polyaromatic chains of tribenzopentaphene copolymers through cyclodehydrogenation of their poly‐tetraphenylbenzene precursors

Three polyaromatic‐based polymers are reported to contain co‐monomers of trapezoidal tribenzopentaphene (TBP) polycyclic aromatic hydrocarbons. The synthetic strategy consists of initially making highly soluble tetraphenylbenzene copolymers 4a–c , followed by a cyclodehydrogenation/aromatization reaction to obtain target polymers 5a–c . The polymers were characterized by gel permeation chromatography, FT‐IR, UV‐vis, emission, ¹H‐, and ¹³C‐nuclear magnetic resonance spectroscopy. The target polymers 5a–c reveal emission spectra in the range of 430–480 nm; thus, qualifying them to act as blue emitters. Investigation of the polymers optical properties and their correlation with density functional theory calculations suggest a distorted TBP core from planarity caused by the introduction of a dodecyl group at its wide edge. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3565–3572     

Synthesis of polyethylene and polypropylene containing fluorene units in the side chain

Copolymerizations of ethylene or propylene and allyl monomers containing 9‐fluorenyl group, diallyl‐di‐9‐fluorenylsilane (DAFS), 9,9‐diallylfluorene (DAF), and 9‐allylfluorene (AF), were investigated with various zirconocene catalysts using methylaluminoxane as a cocatalyst. The bridged zirconocene catalysts, especially a syndioselective catalyst, showed a higher reactivity for all the comonomers than the nonbridged catalysts. DAFS was mainly incorporated into the polymer chain via cyclization insertion, whereas DAF was copolymerized via both 1,2‐ and cyclization insertions. Cyclization selectivity, ratio of cyclized insertion unit, of DAF in the copolymerization with propylene was higher than that in the copolymerization with ethylene. Copolymerization with AF yielded low‐molecular weight copolymer because of frequent chain transfer reaction. Optical properties of the propylene based‐copolymers were investigated by UV‐vis and photoluminescence spectroscopy, and absorption‐ and emission‐derived from fluorenyl groups were detected in the copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3542–3552, 2010     

New benzodithiophene‐ and benzooxadiazole/benzothiadiazole‐based donor–acceptor π‐conjugated polymers for organic photovoltaics

A new set of push‐pull type 2D‐conjugated polymers (P1–P4) were designed and synthesized where A1, A2 (oxygen analogues) and A3, A4 (sulfur analogues) are electron deficient units used as co‐monomers. On introduction of new repeating units into the polymer backbone, significant changes were observed in optoelectronic properties. Furthermore, the heteroatom exchange in new repeating units has also brought notable changes in photophysical properties, in particular P1 and P2 (oxygen analogues) showed bathochromic shift in UV‐vis absorption spectra and deeper HOMO energy levels than P3, P4 (sulfur analogues). Interestingly P1, P3 absorption spectra shows a vibronic shoulder (659, 652 nm) peak in lower energy region, and this might originated from non‐covalent interactions between the electron rich and electron deficient units. In addition, the systematic investigation of these polymers with additive and solvent treatment, yielded in enhanced power conversion efficiency of 4.29% for P3‐based devices in bulk heterojunction organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2668–2679     

Poly(triphenylamine)s derived from oxidative coupling reaction: Substituent effects on the polymerization,electrochemical, and electro‐optical properties

A series of triphenylamine‐based polymers containing electron‐donating methoxy (? OCH₃) and electron‐withdrawing cyano or nitro (? CN or ? NO₂) substituents in the main chains have been designed and investigated. These conjugated polymers ( P1 – P3 ) could be readily prepared by oxidative coupling polymerization from monomers ( M1 – M3 ) using FeCl₃ as an oxidant. The P2 and P3 exhibited moderate high T_g values (203–205 °C) and thermal stability. These polymers in NMP solution showed UV–vis absorption around 288–404 nm and photoluminescence peaks around 435–492 nm. P1 – P3 showed reversible oxidation redox couples at E_onset = 0.67, 0.99, and 1.00 V in solution of 0.1 M tetrabutylammonium perchlorate (TBAP)/acetonitrile (CH₃CN), respectively. M3 and P3 exhibited reversible reduction redox couples at E_onset = ?1.04 and ?1.03 V. These polymers also revealed electrochromic characteristic changing color at different potential. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 285–294, 2009     

Self‐assembly of π‐conjugated bis(terpyridine) ligands with zinc(II) ions: New metallosupramolecular materials for optoelectronic applications

A series of main‐chain metallopolymers ( P1–P10 ) was prepared by the self‐assembly of rigid‐linear π‐conjugated bis(terpyridine) monomers ( 1–10 ) with Zn^II ions and was fully characterized. The polymerization was additionally confirmed by UV/vis titration experiments. A strong increase in viscosities (around 1.6 times) relative to those of the monomer solutions was found. The thermal stability of P1–P10 compared with that of 1–10 was enhanced as a result of the metallopolymerization. The electro‐optical properties of the materials were investigated in detail. Tuning of the electrochemical and photophysical properties was enabled; thus, bright purple to green photoluminescent (PL) emission (PL quantum yields of 0.12–0.81) for P1–P10 was observed in solution with the emission color strongly depending on the nature of the π‐conjugated bis(terpyridine) system. Thin homogeneous films of P6 were prepared by solution processing, that is, spin‐coating and inkjet‐printing, and exhibited intense yellow PL emission in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4083–4098, 2009     

Synthesis and opto-electronic properties of functionalized pyrimidine-based conjugated polymers

Side chain engineering has been used for tuning the opto-electronic properties of organic semiconductors. In this work, a series of pyrimidine-based donor-acceptor (D-A) conjugated polymers functionalized with electron-withdrawing or electron-donating side chains were synthesized. The opto-electronic properties of the pyrimidine D-A conjugated polymers were investigated focusing on the dependence on the electron withdrawing strength of the acceptor moiety, while maintaining the same donor moiety. Fine-tuning of the energy levels was achieved by introducing electron donating (alkoxy [ OR] and alkylthio [ SR]) or electron withdrawing (alkylsulfinyl [ SOR] and alkylsulfonyl [ SO₂R]) side chains onto the acceptor moiety. The effects of side chain modification have been investigated through DFT calculations, UV–vis analysis, and electrochemical measurements. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2547–2553     

Water‐soluble anionic conjugated polymers for metal ion sensing: Effect of interchain aggregation

Three sulfonato‐containing fluorene‐based anionic water‐soluble conjugated polymers, which are specially designed to link fluorene with alternating moieties such as bipyridine ( P1 ), pyridine ( P2 ), and benzene ( P3 ) have been synthesized via the Pd‐catalyzed Sonogashira‐coupling reaction, respectively. These polymers had good solubility in water and showed different responses for transition metal ions with different valence in aqueous environments: the fluorescence of bipyridine‐containing P1 can be completely quenched by addition of all transition metal ions selected and showed a good selectivity for Ni²⁺; the pyridine‐containing P2 had a little response for monovalent and divalent metal ions while showed good quenching with the addition of trivalent metal ions (with a special selectivity for Fe³⁺); P3 had responses only for the trivalent metal ions within the ionic concentration we studied. After investigation of the UV‐vis absorption spectra, PL emission spectra, DLS, and fluorescence lifetime of P1 – P3 in aqueous solution when adding transition metal ions, we found that the different spectrum responses of these polymers are attributed to the different coordination ability of the units linked with fluorene in the main chain. The energy or electron‐transfer reactions were the main reason for fluorescence quenching of P1 and P2 . On the other hand, interchain aggregation caused by trivalent metal ions lead to fluorescence quenching for P3 and also caused partly fluorescence quenching of P1 and P2 . These results revealed the origin of ionochromic effects of these polymers and suggested the potential application for these polymers as novel chemosensors with higher sensing sensitivity in aqueous environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5057–5067, 2009