Hydrovinylation of norbornene. Ligand-dependent selectivity and asymmetric variations

[reaction: see text] Norbornene undergoes Ni-catalyzed (1-2 mol% allylnickel bromide/phosphine/NaBARF or AgSbF(6), 1 bar ethylene, -50 degrees C) hydrovinylation (>97% yield), giving either a 1:1 or a 2:1 (norbornene/ethylene) adduct depending on the size of the phosphine. Use of binaphthol-derived phosphoramidite ligand results in up to 80% ee for the 1:1 adduct. The course of the reaction is highly dependent on the ligand (size and configuration of the appendages) and the counteranion present.     

Novel formation of iodobenzene derivatives from 1-(methylthio)-3-tosylhexa-1,3-dien-5-ynes via iodine-induced intramolecular cyclization

The reaction of (1E,3E)-1-(methylthio)-3-tosylhexa-1,3-dien-5-ynes (3) with iodine to form iodine-substituted benzenes (4) is reported. The reaction of 3 with iodine proceeded very slowly, but UV irradiation accelerates the reaction to give 4 in high-to-excellent yields. Irradiation induces the cis-trans isomerization of the C1-C2 double bond, leading to the (1Z,3E)-geometric isomer (3'), which easily reacts with iodine to afford 4. This reaction is applicable to 3-(methoxycarbonyl)-1-(methylthio)-6-phenylhexa-1,3-dien-5-yne (11), which is synthesized as a geometric mixture. Interestingly, this mixture can be used as the starting material. Irradiation of the mixture (the geometric isomer ratio = 50:28:5:17) with iodine resulted in the formation of methyl 3-iodo-4-phenylbenzoate (12) in 80% yield.     

The deoxydative substitution reactions of nicotinamide and nicotinic acid N-oxides by 1-adamantanethiol in acetic anhydride

The reaction of nicotinamide N-oxide with 1-adamantanethiol in acetic anhydride yielded a mixture of 2-and 6-(1-adamantylthio)nicotinamides (49%, in the ratio of 24:1) and 2-, 5-, and 6-(1-adamantylthio)nicotino-nitriles (18%, in the ratio of 79:1:20). From a reaction of nicotinic acid N-oxide with 1-adamantanethiol, there was isolated 2-(1-adamantylthio)nicotinic acid as the only sulfide in 23% yield. Carbon? sulfur bond cleavage took place when 2-(1-adamantylthio)nicotinic acid, or the corresponding amide or nitrile, were boiled with concentrated hydrochloric acid to furnish 2-mercaptonicotinic acid and 1-chloroadamantane, quantitatively. The reaction of nicotinamide N-oxide alone in acetic anhydride at 135° formed N-acetyl-2-hydroxynicotinamide (61%), 2-hydroxynicotinonitrile (0.5%) and N,N-diacetyl-2-acetoxynicotinamide (0.8%).     

STUDY ON THE SYNTHESIS AND PHYSICOCHEMICAL PROPERTIES OF SUCROSE POLYESTER

Orthogonal test was used to evaluate the effects of synthetic such as temperature (120～140 ℃), reaction time (4-6) and substrate molar ratio of methyl oleate to sucrose (8:1-12:1) on the percent quantity conversion to sucrose polyester. Sucrose polyester was synthesized by a solvent-free one-stage interesterification. The optimum reaction conditions are as follows: methyl oleate/sucrose = 10∶1 (mol/mol); reaction temperature is 140 ℃;yield reaches 88.15%, and the degree of esterification (DE) is over 7 in the conditions. Thin layer chromatography (TLC), column chromatography (CC), High-performance liquid chromatography (HPLC) were used to analyze the product, the results show that the percent of sucrose polyoleate is over 70% in the product. The physicochemical properties of sucrose polyesters were compared with cooking oil. The results show that the qualities of sucrose polyesters are all up to the triglyceride.     

Spontaneous hydrolysis reactions of cis- and trans-beta-methyl-4-methoxystyrene oxides (Anethole oxides): buildup of trans-anethole oxide as an intermediate in the spontaneous reaction of cis-anethole oxide

Rates and products of the reactions of trans- and cis-beta-methyl-4-methoxystyrene oxides (1 and 2) (anethole oxides) and beta,beta-dimethyl-4-methoxystyrene oxide (3) in water solutions in the pH range 4-12 have been determined. In the pH range ca. 8-12, each of these epoxides reacts by a spontaneous reaction. The spontaneous reaction of trans-anethole oxide (1) yields ca. 40% of (4-methoxyphenyl)acetone and 60% of 1-(4-methoxyphenyl)-1, 2-propanediols (erythro:threo ratio ca. 3:1). The spontaneous reaction of cis-anethole oxide is more complicated. The yields of diol and ketone products vary with pH in the pH range 8-11, even though there is not a corresponding change in rate. These results are interpreted by a mechanism in which 2 undergoes isomerization in part to the more reactive trans-anethole oxide (1), which subsequently reacts by acid-catalyzed and/or spontaneous reactions, depending on the pH, to yield diol and ketone products. The buildup of the intermediate trans-anethole oxide in the spontaneous reaction of cis-anethole oxide was detected by (1)H NMR analysis of the reaction mixture. Other primary products of the spontaneous reaction of 2 are (4-methoxyphenyl)acetone (73%) and threo-1-(4-methoxyphenyl)-1,2-propanediol (ca. 3%). The rates and products of the spontaneous reaction of 2 and its beta-deuterium-labeled derivative were determined, and the lack of significant kinetic and partitioning deuterium isotope effects indicates that the isomerization of 2 to ketone and to trans-anethole oxide must occur primarily by nonintersecting reaction pathways.     

Sodium chloride-catalyzed oxidation of multiwalled carbon nanotubes for environmental benefit

A sodium chloride (NaCl) catalyst (0.1 w/w %) lowers the oxidation temperature of graphitized multiwalled carbon nanotubes: MWCNT-20 (diameter: 20-70 nm) and MWCNT-80 (diameter: 80-150 nm). The analysis of the reaction kinetics indicates that the oxidation of MWCNT-20 and MWCNT-80 mixed with no NaCl exhibits single reaction processes with activation energies of E(a) = 159 and 152 kJ mol(-1), respectively. The oxidation reaction in the presence of NaCl is shown to consist of two different reaction processes, that is, a first reaction and a second reaction process. The first reaction process is dominant at a low temperature of around 600 degrees C, while the second reaction process becomes more dominant than the first one in a higher temperature region. The activation energies of the first reaction processes (MWCNT-20: E(a1) = 35.7 kJ mol(-1); MWCNT-80: E(a1) = 43.5 kJ mol(-1)) are much smaller than those of the second reaction processes (MWCNT-20: E(a2) = 170 kJ mol(-1); MWCNT-80: E(a2) = 171 kJ mol(-1)). The comparison of the kinetic parameters and the results of the spectroscopic and microscopic analyses imply that the lowering of the oxidation temperature in the presence of NaCl results from the introduction of disorder into the graphitized MWCNTs (during the first reaction process), thus increasing the facility of the oxidation reaction of the disorder-induced nanotubes (in the second reaction process). It is found that the larger nanopits and cracks on the outer graphitic layers are caused by the catalytic effect of NaCl. Therefore, the NaCl-mixed samples showed more rapid and stronger oxidation compared with that of the nonmixed samples at the same residual quantity.     

共轭三烯及Galbanolenes的立体选择性合成

通过修饰改造的Ramberg-Backlund反应,(E,E)-,(E,Z)-,(Z,Z)-二烯丙基砜(6)在CBr~2F~2存在下,用KOH/Al~2O~3处理,选择性地生成(E,E,E)-,(E,E,Z)-,(Z,E,Z)-1,3,5-己三烯(7),反应的立体选择性依赖于溶剂和温度,通常在0℃时用CH~2Cl~2作溶剂可达到良好的(E)-选择性,有些时候在-78℃以下,以V(t-BuOH):V(CBr~2F~2)=1:1作为混合溶剂时(E)-选择性更好,该新方法被用于天然产物Galbanolenes(7m)和(7n)的合成中。     

Kinetics, products, and stereochemistry of the reaction of chlorine atoms with cis- and trans-2-butene in 10-700 Torr of N2 or N2/O2 diluent at 297 K

The reactions of Cl atoms with cis- and trans-2-butene have been studied using FTIR and GC analyses. The rate constant of the reaction was measured using the relative rate technique. Rate constants for the cis and trans isomers are indistinguishable over the pressure range 10-900 Torr of N2 or air and agree well with previous measurements at 760 Torr. Product yields for the reaction of cis-2-butene with Cl in N2 at 700 Torr are meso-2,3-dichlorobutane (47%), DL-2,3-dichlorobutane (18%), 3-chloro-1-butene (13%), cis-1-chloro-2-butene (13%), trans-1-chloro-2-butene (2%), and trans-2-butene (8%). The yields of these products depend on the total pressure. For trans-2-butene, the product yields are as follows: meso-2,3-dichlorobutane (48%), dl-2,3-dichlorobutane (17%), 3-chloro-1-butene (12%), cis-1-chloro-2-butene (2%), trans-1-chloro-2-butene (16%), and cis-2-butene (2%). The products are formed via addition, addition-elimination from a chemically activated adduct, and abstraction reactions. These reactions form (1) the stabilized 3-chloro-2-butyl radical, (2) the chemically activated 3-chloro-2-butyl radical, and (3) the methylallyl radical. These radicals subsequently react with Cl2 to form the products via a proposed chemical mechanism, which is discussed herein. This is the first detailed study of stereochemical effects on the products of a gas-phase Cl+olefin reaction. FTIR spectra (0.25 cm(-1) resolution) of meso- and DL-2,3-dichlorobutane are presented. The relative rate technique was used (at 900 Torr and 297 K) to measure: k(Cl + 3-chloro-1-butene) = (2.1 +/- 0.4) x 10(-10), k(Cl + 1-chloro-2-butene) = (2.2 +/- 0.4) x 10(-10), and k(Cl + 2,3-dichlorobutane) = (1.1 +/- 0.2) x 10(-11) cm3 molecule(-1) s(-1).     

二氧化硒催化过氧化氢氧化萘丙醛制萘丙酸的研究

萘丙酸((±)-2-(6-甲氧基-2-萘基)-丙酸)的右旋体有解热镇痛特效,国内生产中由萘丙醛氧化成酸系采用多伦试剂,耗费大量硝酸银。我们采用过氧化氢作氧化剂,结果表明,制得的产品纯度高,而且成本低。     

Organothiophosphorus compounds as inductors of the iodine-azide reaction. Analytical application

Thiophosphoryl compounds were found to exhibit strong induction activity in the iodine-azide reaction. On this basis three procedures for their determination: titrimetric (0.15-1 mumol), coulometric (1-20 nmol) and spectrophotometric (0.5-5 nmol) have been developed. RSD in all applied methods (techniques) have been found at the 1-7% level. The induction coefficients were dependent on the type of compound applied and on the reaction condition and varied from 90 to 450.     

三氯化铁催化的—锅法合成3,4-二氢嘧啶-2-酮

六水合三氯化铁催化下,β-酮酸酯、芳香醛、脲(1:1:1.5)在无水乙醇中进行环化缩合反应,合成了3,4-二氢嘧啶-2-酮衍生物,改进了Biginelli用盐酸为催化剂的一锅法反应,缩短了反应时间,操作简便,产率高达80％～90％,且Fe~(3 )对环境友好。     

The difference in reactivity of (−)-mono and dimenthyl vs. diethyl alkylphosphonates in the α-lithiation reaction: Carbanionic synthesis of unknown (−)-dimenthyl 1-iodoalkylphosphonates and their first use in the radical iodine atom transfer addition (I-ATRA) and cyclisation (I-ATRC) reactions

Unknown (−)-dimenthyl and ethyl (−)-menthyl 1-iodoethylphosphonates were synthesized via 1-lithio derivatives in 85-87% yields. Starting (−)-dimenthyl alkylphosphonates (R = Me, Et, i-Pr) were obtained in the Michaelis-Becker reaction (75-81% yields) and/or in the methylation reaction of the corresponding 1-lithio-alkylphosphonates (78-92% yields). An interesting concentration and time correlations, never observed for diethyl alkylphosphonates, were found for the metalation of bulky (−)-menthyl alkylphosphonates with n-BuLi and general reaction conditions for the carbanion generation were elaborated. The first example of the I-ATRA reaction of (−)-dimenthyl 1-iodoethylphosphonate with 1-hexene (AIBN) gave four diastereomers (1.6:1:1:0.4), separated into two pairs. The I-ATRC reaction was not effective due to a steric hindrance around the reactive center. The X-ray analysis of (−)-dimenthyl methylphosphonate confirmed a considerable steric hindrance in higher (−)-dimenthyl alkylphosphonate esters in comparison to their diethyl analogs.     

Contribution of the photo-Fenton reaction to hydroxyl radical formation rates in river and rain water samples.

The hydroxyl radical (OH radical) formation rates from the photo-Fenton reaction in river and rain water samples were determined by using deferoxamine mesylate (DFOM), which makes a stable and strong complex with Fe(III), resulting in a suppression of the photo-Fenton reaction. The difference between the OH radical formation rates with and without added DFOM denotes the rate from the photo-Fenton reaction. The photoformation rates from the photo-Fenton reaction were in the range of 0.7 - 45.8 x 10(-12) and 2.7 - 32.3 x 10(-12) M s(-1) in river and rain water samples, respectively. A strong positive correlation between the OH radical formation rate from the photo-Fenton reaction and the amount of fluorescent matter in river water suggests that fluorescent matter, such as humic substances, plays an important role in the photo-Fenton reaction. In rain water, direct photolysis of hydrogen peroxide was an important source of OH radicals as well as the photo-Fenton reaction. The contributions of the photo-Fenton reaction to the OH radical photoformation rates in river and rain water samples were in the ranges of 2 - 29 and 5 - 38%, respectively. Taking into account the photo-Fenton reaction, 33 - 110 (mean: 80) and 42 - 110 (mean: 84)% of OH radical sources in river and rain water samples, respectively, collected in Hiroshima prefecture were elucidated.     

Reactions of 2-phenylpyrrole with bromobenzoylacetylene on metal oxides active surfaces

The solvent-free interaction of 2-phenylpyrrole with bromobenzoylacetylene (room temperature) upon their grinding with solid metal oxides (MgO, CaO, ZnO, BaO, Al₂O₃, TiO₂, ZrO₂) and salts (CaCO₃, ZrSiO₄) leads to either the cross-coupling product or the adduct of pyrrole addition to the riple bond of acetylene. The ethynylation is accompanied by the formation of intermediate and side products: E-2-(1-bromo-2-benzoylethenyl)-5-phenylpyrrole and 1,1-di(5-phenylpyrrol-2-yl)-2-benzoylethene. The activity of the metal oxides in the ethynylation reaction falls in the order (in the brackets, the content of 2-benzoylethynyl-5-phenylpyrrole in the reaction mixture is given): ZnO (81%), BaO (73%), Al₂O₃ (71%), MgO (69%), CaO (50%). The oxides, SiO₂, TiO₂, ZrO₂, and the salts, CaCO₃ and ZrSiO₄, are inactive in the ethynylation reaction affording only the intermediate adduct, with ZrO₂ the isolated yield of the bromoethenylpyrrole reaching 60%. ESR monitoring shows the reaction to start from one electron transfer from pyrrole to acetylene mediated by the oxide surface. The adduct is readily converted on Al₂O₃ to 2-(benzoylethynyl)-5-phenylpyrrole crystallized mostly as cis-rotamer (X-ray data).     

Diastereoselective palladium-catalyzed formate reduction of allylic carbonates as a new entry into propionate units

[reaction: see text] The diastereoselective palladium-catalyzed formate reduction of allylic carbonates is described. Reduction of allylic carbonates under mild conditions (Pd(OAc)(2) (2.5-5 mol %), [n-Bu(3)PH]BF(4) (2.5-5 mol %), HCO(2)H/Et(3)N (1:2) (3 equiv), CH(3)CN (0.05M), 40 degrees C) affords the terminal olefin as the syn isomer in good yields and modest to excellent diastereoselectivity. These compounds, which are useful building blocks for the synthesis of polypropionate units, are the synthetic equivalent of the products obtained from an aldol reaction of an alpha-methyl-beta,gamma-unsaturated aldehyde.     

Atmospheric chemistry of diethyl methylphosphonate, diethyl ethylphosphonate, and triethyl phosphate

Rate constants for the reactions of OH radicals and NO(3) radicals with diethyl methylphosphonate [DEMP, (C(2)H(5)O)(2)P(O)CH(3)], diethyl ethylphosphonate [DEEP, (C(2)H(5)O)(2)P(O)C(2)H(5)], and triethyl phosphate [TEP, (C(2)H(5)O)(3)PO] have been measured at 296 +/- 2 K and atmospheric pressure of air using relative rate methods. The rate constants obtained for the OH radical reactions (in units of 10(-11) cm(3) molecule(-1) s(-1)) were as follows: DEMP, 5.78 +/- 0.24; DEEP, 6.45 +/- 0.27; and TEP, 5.44 +/- 0.20. The rate constants obtained for the NO(3) radical reactions (in units of 10(-16) cm(3) molecule(-1) s(-1)) were the following: DEMP, 3.7 +/- 1.1; DEEP, 3.4 +/- 1.4; and TEP, 2.4 +/- 1.4. For the reactions of O(3) with DEMP, DEEP, and TEP, an upper limit to the rate constant of <6 x 10(-20) cm(3) molecule(-1) s(-1) was determined for each compound. Products of the reactions of OH radicals with DEMP, DEEP, and TEP were investigated using in situ atmospheric pressure ionization mass spectrometry (API-MS) and, for the TEP reaction, gas chromatography with flame ionization detection (GC-FID) and in situ Fourier transform infrared (FT-IR) spectroscopy. The API-MS analyses show that the reactions are analogous, with formation of one major product from each reaction: C(2)H(5)OP(O)(OH)CH(3) from DEMP, C(2)H(5)OP(O)(OH)C(2)H(5) from DEEP, and (C(2)H(5)O)(2)P(O)OH from TEP. The FT-IR and GC-FID analyses showed that the major products (and their molar yields) from the TEP reaction are (C(2)H(5)O)(2)P(O)OH (65-82%, initial), CO(2) (80 +/- 10%), and HCHO (55 +/- 5%), together with lesser yields of CH(3)CHO (11 +/- 2%), CO (11 +/- 3%), CH(3)C(O)OONO(2) (8%), organic nitrates (7%), and acetates (4%). The probable reaction mechanisms are discussed.     

Synthesis of (+)-sch 642305 by a biomimetic transannular Michael reaction

[reaction: see text] The synthesis of (+)-Sch 642305 (1) has been completed in 17 steps in 1.6% overall yield. Transannular Michael reaction of 2b with NaH in THF provided cyclohexenone 23 stereospecifically. Heating 23 in TFA/CDCl(3) provided a 3:1 equilibrium mixture of 23 and 25, which was hydrolyzed to give (+)-6-epi-Sch 642305 (24) and (+)-Sch 642305 (1), respectively.     

苯酚氧化羰化合成碳酸二苯酯的新型PdCl2-Co(Pyca)2催化体系

研究了新型的Ｐｄ－Ｃｏ催化体系催化氧化碳化苯酚合成碳酸二苯酯。当ｎ（ＰｄＣｌ２）：ｎ「Ｃｏ（Ⅱ）」：ｎ（四丁基化铵）：ｎ（苯醌）＝１：１：１０：２５,Ｔ＝１２０,Ｐ＝２．５ＭＰａ（Ｐｃｏ／Ｐｏ２＝４：１）,反应时间８ｈ,ＰｄＣｌ２－Ｃｏ（Ｐｙｃａ）２比ＰｄＣｌ２－Ｃｏ（ＯＡｃ）２的催化活性高。当使用ＰｄＣｌ２－Ｃｏ（Ｐｙｃａ）２催化剂时,ＤＰＣ的产率为６．０３％。最佳的反应温度是１２０℃,ＤＰＣ的产率随着体系的总压增加而增大,当压力升到３．５ＭＰａ时,ＤＰＣ产率为８．５３％。     

固体酸SO_4~(2-)/ZrO_2-MoO_3催化合成富马酸二甲酯

在固体酸SO2-4/ZrO2 MoO3催化下,由马来酸酐和甲醇催化合成了富马酸二甲酯.探讨了催化剂用量,原料配比,反应时间对产率的影响.最佳反应条件为:醇酸摩尔比为6∶1,反应时间3h,催化剂占反应物总质量的1.5%,产物收率在93%以上.     

Study on the base-catalyzed reverse vinylogous aldol reaction of (4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one under Robinson annulation conditions

[reaction: see text] We have proposed a pathway for the base-catalyzed reverse vinylogous aldol reaction of (-)-(4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one [(-)-8] under Robinson annulation conditions. For confirmation, 4-(2,6-dimethyl-3-oxocyclohex-1-enyl)butanal (11) and 4-(2,6-dimethyl-5-oxocyclohex-1-enyl)butanal (12), both of which potentially produce enolate I, were synthesized regioselectively. Unexpectedly, 11 gave a complex mixture, including only a trace amount of (+/-)-8 (less than 5% yield), under these basic conditions. To the contrary, 12 cleanly afforded (+/-)-8 in 66% yield. This result provides evidence for our proposed mechanism of the above reaction.