N,N'-diisopropyl-N'-bis(trimethylsilyl)guanidinate ligand as a supporting coordination environment in yttrium chemistry. Synthesis, structure, and properties of complexes [(Me(3)Si)(2)NC(Ni-Pr)(2)]YCl(2)(THF)(2), [(Me(3)Si)(2)NC(Ni-Pr)(2)]Y(CH(2)SiMe(3))(2)(THF)(2), and [(Me(3)Si)(2)NC(Ni-Pr)(2)]Y[(mu-H)(mu-Et)(2)BEt](2)(THF)

The reaction of anhydrous YCl3 with an equimolar amount of lithium N,N'-diisopropyl-N' '-bis(trimethylsilyl)guanidinate, Li[(Me3Si)2NC(Ni-Pr)2], in tetrahydrofuran (THF) afforded the monomeric monoguanidinate dichloro complex {(Me3Si)2NC(Ni-Pr)2}YCl2(THF)2 (1). Alkylation of complex 1 with 2 equiv of LiCH2SiMe3 in hexane at 0 degrees C yielded the monomeric salt-free dialkyl complex {(Me3Si)2NC(Ni-Pr)2}Y(CH2SiMe3)2(THF)2 (2). The bis(triethylborohydride) complex [(Me3Si)2NC(Ni-Pr)2]Y[(mu-H)(mu-Et)2BEt]2(THF) (5) was prepared by the reaction of complex 1 with 2 equiv of LiBEt3H in a toluene-THF mixture at 0 degrees C. The complexes 1, 2, and 5 were structurally characterized. Complex 2 as well as the systems 2-Ph3B, 2-Ph3B-MAO, and 1-MAO (MAO = methylaluminoxanes) in toluene were inactive in ethylene polymerization, while the product obtained in situ from the reaction of complex 2 with a 2-fold molar excess of PhSiH3 in toluene polymerized ethylene with moderate activity.     

Complexes of the heavier alkaline Earth metals Ca, Sr, and Ba with O-functionalized phosphanide ligands

Metathesis reactions between either SrI(2) or BaI(2) and 2 equiv of the potassium phosphanide [[(Me(3)Si)(2)CH]-(C(6)H(4)-2-OMe)P]K yield, after recrystallization, the complexes [[([Me(3)Si](2)CH)(C(6)H(4)-2-OMe)P](2)M(THF)(n)] [M = Sr, n = 2 (5); Ba, n = 3 (6)]. Similar metathesis reactions between MI(2) and 2 equiv of the more sterically demanding potassium phosphanide [[(Me(3)Si)(2)CH](C(6)H(3)-2-OMe-3-Me)P]K yield the chemically isostructural complexes [[([Me(3)Si](2)CH)(C(6)H(3)-2-OMe-3-Me)P](2)M(THF)(2)] [M = Ca (9), Sr (7), Ba (8)]. Compounds 5-9 have been characterized by multi-element NMR spectroscopy and X-ray crystallography. Complex 9 is thermally unstable and decomposes at room temperature to give the tertiary phosphane [(Me(3)Si)(2)CH](C(6)H(3)-2-OMe-3-Me)P(Me) and an unidentified Ca-containing product. Compounds 5 and 6 also decompose at elevated temperatures to give the corresponding tertiary phosphane [(Me(3)Si)(2)CH](C(6)H(4)-2-OMe)P(Me) and intractable metal-containing products. The decomposition of 5, 6, and 9 suggests that these compounds undergo an intramolecular methyl migration from the O atom in one phosphanide ligand to the P atom of an adjacent phosphanide ligand to give species containing dianionic alkoxo-phosphanide ligands.     

Reduction of carbodiimides by samarium(II) bis(trimethylsilyl)amides-formation of oxalamidinates and amidinates through C-C coupling or C-H activation

The reaction of [Sm{N(SiMe3)2}2(THF)2] (THF=tetrahydrofuran) with carbodiimides RN=C=NR (R=Cy, C6H3-2,6-iPr2) led to the formation of dinuclear SmIII complexes via differing C-C coupling processes. For R=Cy, the product [{(Me3Si)2N}2Sm(micro-C2N4Cy4)Sm{N(SiMe3)2}2] (1) has an oxalamidinate [C2N4Cy4]2- ligand resulting from coupling at the central C atoms of two CyNCNCy moieties. In contrast, for R=C6H3-2,6-iPr2, H transfer and an unusual coupling of two iPr methine C atoms resulted in a linked formamidinate complex, [{(Me3Si)2N}2Sm{micro-(RNC(H)N(Ar-Ar)NC(H)NR)}Sm{N(SiMe3)2}2] (2) (Ar-Ar=C6H3-2-iPr-6-C(CH3)2C(CH3)2-6'-C6H3-2'-iPr). Analogous reactions of RN=C=NR (R=Cy, C6H3-2,6-iPr2) with the SmII "ate" complex [Sm{N(SiMe2)3Na] gave 1 for R=Cy, but a novel C-substituted amidinate complex, [(THF)Na{N(R)C(NR)CH2Si(Me2)N(SiMe3)}Sm{N(SiMe3)2}2] (3), for R=C6H3-2,6-iPr2, via gamma C-H activation of a N(SiMe3)2 ligand.     

Alkali metal complexes of sterically hindered mono- and di-carbanions containing Si-O bonds

The oxygen-bridged, silicon-substituted alkane {(Me3Si)2CH(SiMe2)}2O (1) may be prepared by the reaction of {(Me3Si)2CH}Li with ClSiMe2OSiMe2Cl in refluxing THF. Similarly, the alkane {(Me3Si)(Me2MeOSi)CH(SiMe2CH2)}2 (2) is readily accessible from the reaction between {(Me3Si)(Me2MeOSi)CH}Li and ClSiMe2CH2CH2SiMe2Cl under the same conditions. Compound 1 reacts with two equivalents of MeK to give the polymeric complex [[{(Me3Si)2C(SiMe2)}2O]K2(OEt2)]infinity [5(OEt2)] after recrystallisation. Treatment of 2 with two equivalents of either MeLi or MeK gives the corresponding complexes [{(Me3Si)(Me2MeOSi)C(SiMe2CH2)}2Li][Li(DME)3] [7(DME)3] and [{(Me3Si)(Me2MeOSi)C(SiMe2CH2)}2K2]n (8), respectively, after recrystallisation. Treatment of the alkane (Me3Si)2(Me2MeOSi)CH with one equivalent of MeK gives the polymeric complex [{(Me3Si)2(Me2MeOSi)C}K]infinity (3). These compounds have been identified by 1H and 13C{1H} NMR spectroscopy and elemental analyses and compounds 5(OEt2), 7(DME)3 and 3 have been further characterised by X-ray crystallography. Compound 7(DME)3 crystallises as a solvent-separated ion pair, whereas 5(OEt2) and 3 adopt polymeric structures in the solid state.     

Reductive cyclotetramerization of CO to squarate by a U(III) complex: the X-ray crystal structure of [(U (eta-C8H6{SiiPr3-1,4}2)(eta-C5Me4H)]2(mu-eta2: eta2-C4O4)

The U(III) mixed-sandwich compound [U(eta-C5Me4H)(eta-C8H6{SiiPr3-1,4}2)(THF)] 1 may be prepared by sequential reaction of UI3 with K[C5Me4H] in THF followed by K2[C8H6{SiiPr3-1,4}2]. 1 reacts with carbon monoxide at -30 degrees C and 1 bar pressure in toluene solution to afford the crystallographically characterized dimer [(U(eta-C8H6{SiiPr3-1,4}2)(eta-C5Me4H)]2(mu-eta2: eta2-C4O4) 2, which contains a bridging squarate unit derived from reductive cyclotetramerization of CO. DFT computational studies indicate that addition of a 4th molecule of CO to the model deltate complex [U(eta-COT)(eta-Cp)]2(mu-eta1: eta2-C3O3)] to form the squarate complex [U(eta-COT)(eta-Cp)]2(mu-eta2: eta2-C4O4)] is exothermic by 136 kJ mol-1.     

Alkali metal complexes of a naphthylamine-substituted phosphanide

The reaction between {(Me3Si)2CH}PCl2 and one equivalent of [C10H6-8-NMe2]Li, followed by in situ reduction with LiAlH4, gives the secondary phosphane {(Me3Si)2CH}(C10H6-8-NMe2)PH(1) in good yield as a colourless crystalline solid. Metalation of 1 with Bu(n)Li in diethyl ether gives the lithium phosphanide [{[{(Me3Si)2CH}(C10H6-8-NMe2)P]Li}2(OEt2)](2), which undergoes metathesis with either NaOBu(t) or KOBu(t) to give the heavier alkali metal derivatives [[{(Me3Si)2CH}(C10H6-8-NMe2)P]-Na(tmeda)](3) and [[{(Me3Si)2CH}(C10H6-8-NMe2)P]K(pmdeta)](4), after recrystallisation in the presence of the corresponding amine co-ligand [tmeda = N,N,N',N'-tetramethylethylenediamine, pmdeta = N,N,N',N",N"-pentamethyldiethylenetriamine]. Compounds 2-4 have been characterised by 1H, 13C{1H} and 31P{1H} NMR spectroscopy, elemental analyses and X-ray crystallography. Dinuclear 2 crystallises with the phosphanide ligands arranged in a head-to-head fashion and is subject to dynamic exchange in toluene solution; in contrast, compounds 3 and 4 crystallise as discrete monomers which exhibit no dynamic behaviour in solution. DFT calculations on the model compound [{[(Me)(C10H6-8-NMe2)P]Li},(OMe2)] (2a) indicate that the most stable head-to-head form is favoured by 15.0 kcal mol(-1) over the corresponding head-to-tail form.     

New Routes to Synthetically Useful, Sterically Encumbered Arylaluminum Halides and Hydride Halides

The synthesis and structural characterization of the compounds MesAlCl(2)(THF) (1), MesAlCl(2) (2), MesAl(H)Cl(THF) (3a), MesAl(H)Cl (4a), and (MesAlH(2))(2) (5) (Mes = 2,4,6-t-Bu(3)C(6)H(2)(-)) are described as well as those for two compounds 3b and 4b that are analogs of 3a and 4a but have H:Cl ratios that are less than 1:1. All compounds were characterized by (1)H, (13)C NMR, and IR spectroscopy, and 1, 2, 3a, and 4b were additionally characterized by X-ray crystallography. Compound 1 is best synthesized by the reaction of [(THF)(2)LiH(3)AlMes](2) (6) with 6 equiv of Me(3)SiCl. A more conventional route involving the addition of (THF)(2)LiMes to 2 equiv of AlCl(3) in toluene usually affords a mixture of 1 and AlCl(3).THF. Recrystallization of 1 from n-hexane results in a species that has less than 1 equiv of THF per MesAlCl(2). The THF free complex 2 may be obtained in quantitative yield by heating 1 for 20 min at 90 degrees C under reduced pressure. Compound 3a may be obtained by treating a 1:1 mixture of MesLi(THF)(2) and LiAlH(4) with 2 equiv of Me(3)SiCl or by the addition of slightly less than 4 equiv of Me(3)SiCl to 6. The THF can be removed from 3a by sublimation to give 4a. The related compounds 3b and 4b, which display an aluminum-bound H:Cl ratio that is deficient in H, can be obtained by reactions with slightly more than 2 equiv of Me(3)SiCl. Crystal data at 130 K with Cu Kalpha (lambda = 1.541 78 ?) radiation: 1, C(22)H(37)AlCl(2)O, a = 11.889(3) ?, b = 9.992(3) ?, c = 19.704(5) ?, orthorhombic, space group Pca2(1), Z = 4, R = 0.068 for 1556 (I > 2sigma(I)) data; 2, C(18)H(29)AlCl(2), a = 12.147(5) ?, b = 18.042(6) ?, c = 17.771(7) ?, beta = 95.77(3) degrees, monoclinic, space group P2(1)/n,Z = 8, R = 0.032 for 4610 (I > 2sigma(I)) data; 3a, C(22)H(38)AlClO, a = 16.887(7) ?, b = 16.333(6) ?, c = 8.739(3) ?, beta = 101.41(3) degrees, monoclinic, space group P2(1)/c, Z = 4, R = 0.073 for 2752 (I > 2sigma(I)) data; 4b, C(18)H(29.64)AlCl(1.36), a = 12.077(3) ?, b = 17.920(3) ?, c = 17.634(5) ?; beta = 95.21(2) ?, monoclinic, space group P2(1)/n,Z = 8, R = 0.070 for 4261 (I > 2sigma(I)) data.     

Reactions of hypersilyl potassium with rare-earth metal bis(trimethylsilylamides): addition versus peripheral deprotonation

The scope of hypersilyl potassium, KHyp [Hyp = Si(SiMe3)3], as a silylation or deprotonation agent for some rare-earth bis(trimethylsilyl)amides has been explored. Thus, the reaction with Yb{N(SiMe3)2}2 affords the addition product [K][YbHyp{N(SiMe3)2}2] (2) in high yield, which contains a three-coordinate ytterbium atom, therefore representing the first example of a lanthanide silyl with a coordination number lower than 6. In contrast, deprotonation on the periphery is observed with the tris(amides) Ln{N(SiMe3)2}3 (Ln = Y, Yb) and compounds of the type [K][CH2Si(Me)2N(SiMe3)Ln{N(SiMe3)2}2] (Ln = Y (3), Yb (4)) are isolated. Crystallization of 3 from a mixture of benzene and heptane afforded the bis(benzene) solvate [(C6H6)2K][CH2Si(Me)2N(SiMe3)Y{N(SiMe3)2}2] (3a). The reaction between the strong bases nBuLi/tetramethylenediamine (TMEDA) or tBuLi with Y{N(SiMe3)2}3 or Yb{N(SiMe3)2}3 yielded the deprotonation product [(tmeda)Li][CH2Si(Me)2N(SiMe3)Y{N(SiMe3)2}2] (6) and the reduction product [LiYb{N(SiMe3)2}3] (7), respectively. Instead of the expected bimetallic product, the reaction between YbI(2) and 2 equiv of 3 gave the neutral complex [Y{CH2Si(Me)2N(SiMe3)}{N(SiMe3)2}(thf)] (8) in good yield. The compounds have been characterized by melting point, elemental analysis, IR spectroscopy, and X-ray crystallography and for selected species by 1H, 13C, 29Si, and 171Yb NMR spectroscopy. For 3a and 4, the nature of the bonding between the carbanionic centers and the lanthanide and potassium cations was studied by density functional theory calculations.     

Synthesis and structural characterization of Sm(II) and Yb(II) complexes containing sterically demanding, chelating secondary phosphide ligands

Metathesis between [(Me3Si)2CH)(C6H4-2-OMe)P]K and SmI2(THF)2 in THF yields [([Me3Si]2CH)(C6H4-2-OMe)P)2Sm(DME)(THF)] (1), after recrystallization. A similar reaction between [(Me3Si)2CH)(C6H3-2-OMe-3-Me)P]K and SmI2(THF)2 yields [([Me3Si]2CH)(C6H3-2-OMe-3-Me)P)2Sm(DME)].Et2O (2), while reaction between [(Me3Si)2CH)(C6H4-2-CH2NMe2)P]K and either SmI2(THF)2 or YbI2 yields the five-coordinate complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Sm(THF)] (3) or the solvent-free complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Yb] (4), respectively. X-ray crystallography shows that complex 2 adopts a distorted cis octahedral geometry, while complex 1 adopts a distorted pentagonal bipyramidal geometry (1, triclinic, P1, a = 11.0625(9) A, b = 15.924(6) A, c = 17.2104(14) A, alpha = 72.327(2) degrees, beta = 83.934(2) degrees, gamma = 79.556(2) degrees, Z = 2; 2, monoclinic, P2(1), a = 13.176(4) A, b = 13.080(4) A, c = 14.546(4) A, beta = 95.363(6) degrees, Z = 2). Complex 3 crystallizes as monomers with a square pyramidal geometry at Sm and exhibits short contacts between Sm and the ipso-carbon atoms of the ligands (3, monoclinic, C2/c, a = 14.9880(17) A, b = 13.0528(15) A, c = 24.330(3) A, beta = 104.507(2) degrees, Z = 4). Whereas preliminary X-ray crystallographic data for 4 indicate a monomeric structure in the solid state, variable-temperature 1H, 13C(1H), 31P(1H), and 171Yb NMR spectroscopies suggest that 4 undergoes an unusual dynamic process in solution, which is ascribed to a monomer-dimer equilibrium in which exchange of the bridging and terminal phosphide groups may be frozen out at low temperature.     

Insertion reactions of alkynes and organic isocyanides into the palladium-carbon bond of dimetallic Fe-Pd alkoxysilyl complexes

Insertion of MeO(2)C-C[triple bond]C-CO(2)Me (DMAD) into the Pd-C bond of the heterodimetallic complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d(dmba-C)] (2) (dppm = Ph(2)PCH(2)PPh(2), dmba-C = metallated dimethylbenzylamine) and [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d(8-mq-C,N)] (3) (8-mq-C,N = cyclometallated 8-methylquinoline) yielded the sigma-alkenyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (7) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)[double bond, length as m-dash]C(CO(2)Me)(CH(2)C(9)H(6)N)}] (8), respectively. The latter afforded the adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(CH(2)C(9)H(6)N)}(CNBu(t))] (9) upon reaction with 1 equiv. of Bu(t)NC. The heterodinuclear sigma-butadienyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph=C(Ph)C(CO(2)Me)=(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (11) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph)=C(CO(2)Et)C(Ph)=C(CO(2)Et)(CH(2)C(9)H(6)N)}] (13) have been obtained by reaction of the metallate K[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)] (dppm = Ph(2)PCH(2)PPh(2)) with [P[upper bond 1 start]dCl{C(Ph)=C(Ph)C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)N[upper bond 1 end]Me(2))}] or [P[upper bond 1 start]dCl{C(Ph)=C(CO(2)Et)C(Ph)=(CO(2)Et)}(CH(2)C(9)H(6)N[upper bond 1 end])], respectively. Monoinsertion of various organic isocyanides RNC into the Pd-C bond of 2 and 3 afforded the corresponding heterometallic iminoacyl complexes. In the case of complexes [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end][upper bond 1 start]d{C=(NR)(CH(2)C(9)H(6)N[upper bond 1 end])}] (15a R = Ph, 15b R = xylyl), a static six-membered C,N chelate is formed at the Pd centre, in contrast to the situation in [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=NR)(o-C(6)H(4)CH(2)NMe(2))}] (14a R = o-anisyl, 14b R = 2,6-xylyl) where formation of a mu-eta(2)-Si-O bridge is preferred over NMe(2) coordination. The outcome of the reaction of the dimetallic alkyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe] with RNC depends both on the stoichiometry and the electronic donor properties of the isocyanide employed for the migratory insertion process. In the case of o-anisylisocyanide, the iminoacyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=N-o-anisyl)Me}] (16) results from the reaction in a 1 : 1 ratio. Addition of three equiv. of o-anisylisocyanide affords the tris(insertion) product [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}] (18). After addition of a fourth equivalent of o-anisylNC, exclusive formation of the isocyanide adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}(CN-o-anisyl)] (19) was spectroscopically evidenced. In the complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-C(6)H(4)COCH(2))](2)Me}] (20), the sigma-bound diazabutadienyl unit is part of a 12-membered organic macrocyle which results from bis(insertion) of 1,2-bis(2-isocyanophenoxy)ethane into the Pd-Me bond of the precursor complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe]. In contrast, addition of two equivalents of tert-butylisocyanide to a solution of the latter afforded [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]Fe(mu-dppm)P[upper bond 1 end]d{C(=NBu(t))Me}(CNBu(t))] (21) in which both a terminal and an inserted isocyanide ligand are coordinated to the Pd centre. In all cases, there was no evidence for competing CO substitution at the Fe(CO)(3) fragment by RNC. The molecular structures of the insertion products 8 x CH(2)Cl(2) and 16 x CH(2)Cl(2) have been determined by X-ray diffraction.     

A Dimeric NHC–Silicon Monotelluride: Synthesis,Isomerization, and Reactivity

The reaction of the NHC–disilicon(0) complex [(I_Ar)Si=Si(I_Ar)] ( 1 , I_Ar=:C{N(Ar)C(H)}₂, Ar=2,6‐i Pr₂C₆H₃) with two equiv of elemental Te in toluene at room temperature for three days afforded a mixture of the first dimeric NHC–silicon monotelluride [(I_Ar)Si=Te]₂ ( 2 ) and its isomeric complex [(I_Ar)Si(μ‐Te)Si(I_Ar)=Te] ( 3 ). When the same reaction was performed for ten days, only 3 was isolated from the reaction mixture. Compound 1 reacted with four equiv of elemental Te in toluene for four weeks, which proceeded through the formation of 2 , 3 and the NHC–disilicon tritelluride complex [{(I_Ar)Si(=Te)}₂Te] ( 5‐Te ), to form the dimeric NHC–silicon ditelluride [(I_Ar)Si(=Te)(μ‐Te)]₂ ( 4 ). The reactions are in line with theoretical mechanistic studies for the formation of 4 . Compound 3 reacted with one equiv of elemental sulfur in toluene to form the first NHC–disilicon sulfur ditelluride complex [{(I_Ar)Si(=Te)}₂S] ( 5‐S ).     

A Dimeric NHC–Silicon Monotelluride: Synthesis,Isomerization, and Reactivity

The reaction of the NHC–disilicon(0) complex [(I_Ar)Si=Si(I_Ar)] ( 1 , I_Ar=:C{N(Ar)C(H)}₂, Ar=2,6‐i Pr₂C₆H₃) with two equiv of elemental Te in toluene at room temperature for three days afforded a mixture of the first dimeric NHC–silicon monotelluride [(I_Ar)Si=Te]₂ ( 2 ) and its isomeric complex [(I_Ar)Si(μ‐Te)Si(I_Ar)=Te] ( 3 ). When the same reaction was performed for ten days, only 3 was isolated from the reaction mixture. Compound 1 reacted with four equiv of elemental Te in toluene for four weeks, which proceeded through the formation of 2 , 3 and the NHC–disilicon tritelluride complex [{(I_Ar)Si(=Te)}₂Te] ( 5‐Te ), to form the dimeric NHC–silicon ditelluride [(I_Ar)Si(=Te)(μ‐Te)]₂ ( 4 ). The reactions are in line with theoretical mechanistic studies for the formation of 4 . Compound 3 reacted with one equiv of elemental sulfur in toluene to form the first NHC–disilicon sulfur ditelluride complex [{(I_Ar)Si(=Te)}₂S] ( 5‐S ).     

Alkyl complexes of strontium and barium: synthesis and structural characterization of [(Me3Si)2(MeOMe2Si)C]2Sr(THF) and [(Me3Si)2(MeOMe2Si)C]2Ba(MeOCH2CH2OMe)

Metathesis between either SrI2 or BaI2 and 2 equiv of {(Me3Si)2(MeOMe2Si)C}K in THF yields the novel heavier alkali metal dialkyls {(Me3Si)2(MeOMe2Si)C}2M(L) [M(L) = Sr(THF) (2), Ba(DME) (3) (DME = 1,2-dimethoxyethane)] after recrystallization.     

Thallium(I) sandwich, multidecker, and ether complexes stabilized by weakly-coordinating anions: a spectroscopic, structural, and theoretical investigation

The reaction of thallium ethoxide with [H(OEt2)2][H2N{B(C6F5)3}2] in diethyl ether afforded [Tl(OEt2)3][H2N{B(C6F5)3}2] (2a), [Tl(OEt2)4][H2N{B(C6F5)3}2] (2b), or [Tl(OEt2)2][H2N{B(C6F5)3}2].CH2Cl2 (2c), depending on the reaction conditions. The dication in the hydrolysis product [Tl4(mu3-OH)2][H2N{B(C6F5)3}2]2.4CH2Cl2 consists of two bridging and two terminal Tl+ ions bound to triply bridging hydroxides. Heating Et2O complexes in toluene afforded [Tl(eta6-toluene)n][H2N{B(C6F5)3}2] (4, n = 2, 3), while C6Me6 addition gave the first thallium-C6Me6 adduct, [Tl(eta6-C6Me6)2][H2N{B(C6F5)3}2].1.5CH2Cl2 (5a), a bent sandwich complex with very short Tl...centroid distances. These arene complexes show no close contacts between cations and anions. Displacement of toluene ligands by ferrocene gave [Tl2(FeCp2)3][H2N{B(C6F5)3}2]2.5CH2Cl2 (6) which contains the multidecker cations [Tl(FeCp2)]+ and [Tl(FeCp2)2]+ in a 1:1 ratio. By contrast, decamethylferrocene leads to electron transfer; the isolable thallium-ferrocene complexes may therefore be viewed as precursor complexes for this redox step. With 18-crown-6 the complexes [Tl(18-crown-6)2][H2N{B(C6F5)3}2] (11a) and [Tl(18-crown-6)][H2N{B(C6F5)3}2].2CH2Cl2 (11b) were isolated. The structure of the latter shows an eight-coordinate thallium ion, where the coordination to the six oxygen donors in equatorial positions is completed by axial contacts to two F atoms of the counter anions. The bonding between thallium(I) and arenes was explored by density-functional theory (DFT) calculations. The optimized geometry of [Tl(tol)3]+ converged to a structure very similar to that obtained experimentally. Calculations on [Tl(C6Me6)2]+ (5b) to establish whether a linear or bent geometry is the most stable revealed a very flat potential-energy surface for distortions of the Ctr(3)-Tl-Ctr(4) angle. Overall, there is very little energetic preference for one particular geometry over another above about 140 degrees , in good agreement with the crystallographic geometry. The calculated Tl-arene interaction energies increase from 73.7 kJ mol-1 for toluene to 121.7 kJ mol-1 for C6Me6.     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.     

Synthesis, structure, and 15N NMR studies of paramagnetic lanthanide complexes obtained by reduction of dinitrogen

The recently discovered LnZ3/M and LnZ2Z'/M methods of reduction (Ln = lanthanide; M = alkali metal; Z, Z' = monoanionic ligands that allow these combinations to generate "LnZ2" reactivity) have been applied to provide the first crystallographically characterized dinitrogen complexes of cerium, [C5Me5)2(THF)Ce]2(mu-eta2.eta2-N2) and [(C5Me4H)2(THF)Ce]2(mu-eta2.eta2-N2), so that the utility of 15N NMR spectroscopy with paramagnetic lanthanides could be determined. [(C5Me5)2(THF)Pr]2(mu-eta2.eta2-N2) and [(C5Me4H)2(THF)Pr]2(mu-eta2.eta2-N2) were also synthesized, crystallographically characterized, and studied by 15N NMR methods. The data were compared to those of [(C5Me5)2Sm]2(mu-eta2.eta2-N2). [(C5Me5)2(THF)Ce]2(mu-eta2.eta2-N2) and [(C5Me5)2(THF)Pr]2(mu-eta2.eta2-N2) are unlike their (C5Me4H)1- analogs in that the solvating THF molecules are cis rather than trans. Structural information on precursors, (C5Me4H)3Ce, (C5Me4H)3Pr, and the oxidation product [(C5Me5)2Ce]2(mu-O) is also presented.     

Synthesis and molecular structures of phenylamides of magnesium, calcium, strontium, and barium--from molecular to polymeric structures

Several preparative procedures for the synthesis of the THF complexes of the alkaline earth metal bis(phenylamides) of Mg (1), Ca (2), Sr (3), and Ba (4) are presented such as metalation of aniline with strontium and barium, metathesis reactions of MI2 with KN(H)Ph, and metalation of aniline with arylcalcium compounds or dialkylmagnesium. The THF content of these compounds is rather low and an increasing aggregation is observed with the size of the metal atom. Thus, tetrameric [(THF)2Ca{mu-N(H)Ph}2]4 (2) and polymeric [(THF)2Sr{mu-N(H)Ph}2]infinity and {[(THF)2Ba{mu-N(H)Ph}2]2[(THF)Ba{mu-N(H)Ph}2]2}infinity show six-coordinate metal atoms with increasing interactions to the pi systems of the phenyl groups with increasing the radius of the alkaline earth metal atom.     

Synthesis, Structure and Catalytic Activity Comparison of Tris- and Tetracoordinated Lanthanide Amides

Tetracoordinated lanthanide amides [(MeaSi)2N]3Ln (μ-C1)Li(THF)3 (Ln=La (1), Pr (2)) were synthesized by the reaction of anhydrous lanthanide(Ⅲ) chlorides LnCl3 (Ln=La, Pr) with 3 equiv, of lithium bis(trimethylsilyl)amide (Me3Si)2NLi in THF, followed by recrystallization from toluene. Sublimation of 1 and 2 afforded the triscoordinate lanthanide amides [(Me3Si)2N]3Ln (Ln=La, Pr). The crystal structure of 2 was determined by X-ray diffraction analysis. The catalytic activity studies show that the tetracoordinate amides can be used as single-component MMA (methyl methacrylate) polymerization catalysts, while the triscoordinate amides showed poor activity on MMA polymerization under the same conditions.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Synthesis and structure of diamido ether uranium(IV) and thorium(IV) halide "ate" complexes and their conversion to salt-free bis(alkyl) complexes

The high-yield synthesis, spectroscopic and structural determination of three new uranium(IV) and thorium(IV)ate complexes supported by three different diamido ether ligands are reported. The reaction of Li2[2,6-iPr2PhN(CH2CH2)]2O (Li2[DIPPNCOCN]) with 1 equiv. of UCl4 in THF generates [DIPPNCOCN]UCl3Li(THF)2(1), while reaction in toluene/ether gives salt-free [DIPPNCOCN]UCl2.1/2C7H8(2), which was identified by paramagnetically shifted 1H NMR. Reaction of 0.5 equiv. of {[tBuNON]UCl2}2([tBuNON]=[(CH3)3CN(Si(CH3)2)]2O2-) with 3.5 equiv. LiI in toluene and a minimal amount of THF results in [tBuNON]UI3Li(THF)2(3) and is very similar in structure to 1. {[MesNON]ThCl3Li(THF)}2(4), a dimeric complex with a Th2Li2Cl6 core, is prepared by reaction of Li2[2,4,6-Me3PhN(Si(CH3)2)]2O (Li2[MesNON]) with ThCl4 in THF. The analogous reaction in toluene did not yield the salt-free complex but rather a sterically crowded diligated compound, [MesNON]2Th (5), which was also structurally characterized. Complex 5 was prepared rationally by reacting 2 equiv. Li2[MesNON] with ThCl4 in toluene. The reaction of 1 and 3 with 2 equiv. of LiCH2Si(CH3)3 generates the stable, salt-free organoactinides [DIPPNCOCN]U(CH2Si(CH3)3)2(6) and [tBuNON]U(CH2Si(CH3)3)2(7). Complex 6 was structurally characterized. These reactions illustrate the viability of ate complexes as useful synthetic precursors.