Synthesis,spectroscopic and thermal characterization of Co(II) tetrahydrogen hexaoxoiodate tetrahydrate

A new cobalt(II) tetrahydrogen hexaoxoiodate tetrahydrate Co(H₄IO₆)₂·4H₂O is prepared by crystallization from an acidic aqueous solution. This compound is identified by quantitative analysis, TG, DTA, DSC and IR spectra. A thermal decomposition scheme is proposed. Some phase transitions are identified and the corresponding enthalpy changes are determined.     

Thermal properties of high-T c superconductors

The termal stabilities of several families of high-T _c superconductors (HTSC), as well as the dependence of phase transitions on temperature and stoichiometry, have been studied by X-ray diffraction, DTA, TG and DSC. Experimental results are discussed in the context of decomposition models.     

Subsolidus phase equilibria in the V9Mo6O40-Cr2(MoO4)3 system

The V₉Mo₆O₄₀?Cr₂(MoO₄)₃ system has been investigated using the differential thermal analysis (DTA) and X-ray phase diffraction methods. The system has been found not to be a real two-component system over the whole component system.     

Phase equilibria up to the solidus line in the V2O5−Cr2(MoO4)3 system

Phase equilibria being established in the subsolidus area of the V₂O₅?Cr₂(MoO₄)₃ system at the whole component concentration range have been studied basing on DTA and X-ray phase powder diffraction. It has been established that the system is not a real two-component system in the subsolidus area. The fact has been proved by the presence of fields in that area, where three solid phases remain in mutual equilibrium.     

Synthesis and thermal decomposition of potassium peroxotitanate to K2Ti2O5

Potassium peroxotitanate was synthesized by the peroxo method. During the thermal decomposition K₂Ti₂O₅ can be obtained. The isothermal conditions for decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O were determined on the base of DTA, TG and DSC results. DTA and TG curves were recorded in the temperature range 20 and 900°C at a heating rate of 10°C min^–1. The obtained intermediate compounds were characterized by means of quantitative analysis and IR spectroscopy. The mechanism of thermal decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O to K₂Ti₂O₅ was studied. The optimal conditions for obtaining K₂Ti₂O₅ were determined (770°C for 10 h).     

Solid-state phase equilibria in the V2O5−Fe8V10W16O85 system

Phase equilibria being established in the solid state in the system V₂O₅?Fe₈V₁₀W₁₆O₈₅ were examined by X-ray phase powder diffraction and DTA. It has been found that the system of interest is a real two-component system with an eutectic temperature 620±5°C.     

Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors

La₂Mo₂O₉ ceramics have been prepared from freeze-dried precursors and their properties compared to those of lantanum molybdate obtained by conventional solid state (SS) reaction. All materials have been characterized by X-ray diffraction, scanning electron microscopy and thermal analysis (TGA/DTA/DSC and dilatometry) to characterize the phase formation and phase transition. When the freeze-dried method was applied, the synthesis temperature required to obtain dense samples was much lower than that for powders obtained by SS reaction. The morphology and structure of the oxide particle are significantly dependent on the synthesis method. The grain size is smaller, whereas the density of sintered pellets is higher for the freeze-dried precursor powder when compared with the SS reaction method. Impedance spectroscopy was used to measure the electrical conductivity of La₂Mo₂O₉ from 548 to 1123 K, in air, and to characterize the blocking effects of grain boundaries.     

Synthesis and thermal decomposition of bismuth peroxotitanate to Bi2Ti2O7

Bi-peroxotitanate was synthesized by a peroxo method and after thermal decomposition Bi₂Ti₂O₇ was obtained. DTA, TG and DSC curves of Bi₂[Ti₂(O₂)₄(OH)₆]5H₂O were recorded and used to determine isothermal conditions suitable for obtaining the intermediate samples corresponding to the phases observed during the thermal decomposition. The samples were identified by quantitative analysis, IR spectroscopy and X-ray analysis. The experimental results were used to propose a mechanism of thermal decomposition of the investigated compound to a nanosized Bi₂Ti₂O₇. The optimum conditions were also determined for obtaining Bi₂Ti₂O₇, which is applicable for piezosensors.     

Thermal characterization of piezoelectric and non-piezoelectric Lead Meta-Niobate

Powerful tools like Differential Scanning Calorimetry (DSC) and DTA seem to be under-utilized for the emerging materials for high temperature piezoelectric sensors, while thermal aspects of such piezoelectric phase change are also of theoretical interest. Curie temperature of Lead Meta-Niobate (PbNb₂O₆ or PN) is 570 °C, much higher than that for widely used lead zirconate titanate, making PN potentially more attractive at high temperatures. However, the only specific heat measurement for PN appears to be the 2–25 K study by Lawless, leaving the Curie temperature region unexplored. For PN, piezoelectricity is possible for the meta-stable orthorhombic structure only. So, we prepared pure phase orthorhombic PN by quenching (Q) and the rhombohedral PN by slow-cooling (S). We report for the first time, to our knowledge, DSC across the Curie temperature for Q and S types of PN. We find clear and interesting DSC signals at the Curie temperature in heating and cooling graphs for quenched (Q) PbNb₂O₆ only and none for the slow-cooled (S) PbNb₂O₆.     

Study on Phase Relations in Zn3V2O8–ZnMoO4 System

The phase equlibria established in the Zn₃V₂O₈–ZnMoO₄ system over the whole component concentration range up to 1000°C have been investigated. A phase diagram has been constructed using the results of DTA and XRD methods. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal behaviour of high surface area V2O5/TiO2 catalysts

Thermal analysis (TG and DTA) was employed for the characterization of V₂O₅/TiO₂ catalysts supported on high surface area TiO₂. The results obtained are consistent with a uniform spreading of vanadium oxide on TiO₂ surface for V₂O₅ content less than 15% by weight.The presence of V₂O₅ on the surface of TiO₂ affects the anatase-rutile phase transition lowering the temperature at which it occurs.DTA measurements, performed on catalysts after many months from the preparation, show the appearance of an exothermic peak in the range 280°–340°C. This signal has been related to the oxidation of V(IV) to V(V) on the catalyst surface.Catalysts characterization, performed by chemical analysis and FT-IR spectroscopy, has confirmed this interpretation.It has been suggested that a slow modification of the catalyst occurs, leading to an increase of the V(IV) content during the time.

---

Zusammenfassung Zur Charakterisierung von V₂O₅/TiO₂-Katalysatoren auf hochoberflächigem TiO₂ Trägermaterial wurde die Thermoanalyse (TG und DTA) angewendet. Für einen V₂O₅-Gehalt von weniger als 15 Gew.% entsprechen die erhaltenen Ergebnisse einer gleichmäßigen Verteilung des Vanadiumoxides an der TiO₂-Oberfläche.Die Gegenwart von V₂O₅ an der Oberfläche von TiO₂ beeinflußt die Anatas-Rutil-Phasenumwandlung, indem sie die zugehörige Temperatur verringert.DTA-Messungen an Katalysatoren mehrere Monate nach ihrer Herstellung zeigten das Auftreten eines exothermen Peaks im Bereich 280°–340°C. Dieses Signal wurde der Oxidation von V(IV) zu V(V) an der Katalysatoroberfläche zugeschrieben.Diese Interpretation konnte durch eine Charakterisierung des Katalysatoren durch chemische Analyse und FT-IR-Spektroskopie bestätigt werden.Es wurde angedeutet, daß der Katalysator mit der Zeit einer langsamen Modifikation unterliegt, die zu einem Ansteigen des V(IV)-Gehaltes führt.

     

Crystallization kinetics of Cu3Ti2 forming from Cu60Ti40 glass

Amorphous to crystalline transformation in Cu₆₀Ti₄₀ alloy has been studied under conditions of constant heating rate experiments, using XRD and DSC. In the high temperature XRD experiment, the transformation has been monitored continuously as the integrated X-ray intensity corresponding to a chosen reflection from one of the two crystalline products forming at close by temperatures. Differentiation of the curve thus obtained gives the transformation rate curve which passes through a maximum. From the peak shift with heating rate, the activation energy for the formation of Cu₃Ti₂ crystalline phase has been obtained. The results have been compared with those obtained by DSC.     

Simulation of the condenser of the seawater greenhouse

The BaF₂-YF₃ system was partially investigated, with focus given to the BaY₂F₈ compound and its neighboring phases. In this report, various difficulties that hinder the thermal analysis investigation of this binary fluoride system are described in detail. Samples of various compositions ranging from 58 to 79% YF₃ were prepared and subjected to thermal analysis (DTA, TG and DSC) and X-ray diffraction. Diffraction patterns were analyzed through the Rietveld method for the calculation of phase concentrations in samples and determination of the lattice parameters of monoclinic BaY₂F₈. Thermal results were compared with data from the literature and discrepancies were found.     

A study of the compounds present in the three-component system Dy2O3-SeO2-H2O at 100°C

The solubility isotherm of the system Dy₂O₃-SeO₂-H₂O at 100°C was studied and drawn. The selenites present in the system were identified and isolated. A thorough TG, DTG and DTA analysis was made. By modelling the conditions of TG, DTG and DTA analysis, the phases of the thermal decomposition were isolated and identified. The chemistry of the reaction was described.     

Thermal decomposition of cadmium peroxotitanate to CdTiO3

TG, DTA and DSC curves of Cd₂[Ti₂(O₂)₂O(OH)₆]·H₂O were recorded and used to determine the isothermal conditions suitable for obtaining the intermediate samples corresponding to the phases observed during the thermal decomposition. The samples were identified by quantitative analysis, IR spectroscopy and X-ray analysis. The experimental results were used to propose a mechanism of thermal decomposition of the investigated compound to CdTiO₃. The optimum conditions were also determined for obtaining CdTiO₃ with well-defined crystallinity.     

Phase relations in the CoO–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system in subsolidus area

Thermal properties of Co₂FeV₃O₁₁ have been reinvestigated. It has been proved that this compound does not exhibit polymorphism. It melts incongruently at the temperature of 770±5°C and the phase with lyonsite type structure is the solid product of this melting. Phase relations in the whole subsolidus area of the CoO–V₂O₅–Fe₂O₃ system have been determined. The solidus area projection onto the component concentration triangle plane of this system has been constructed using the DTA and XRD methods. 15 subsidiary subsystems can be distinguished in this system.     

Reactivity in Air of SbVO5 Towards MoO3 and Phase Equilibria in the SbVO5–MoO3 System in the Solid State

The use of XRD and DTA methods has allowed studies on the interaction of the SbVO₅ and MoO₃, taking place in the solid state and in the medium of ambient air. The experimental results of XRD and DTA for all the samples showed the presence of a novel phase, i.e. Sb₃V₂Mo₃O₂₁ apart from various amounts of MoO₃ and V₉Mo₆O₄₀ or SbVO₅ and V₂O_5(s.s.). The SbVO₅–MoO₃ system is not a real two-component system over the entire range of component concentrations up to the solidus line. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heat capacity and thermodynamical properties of the crystal of [RE2(Glu)2(H2O)8](ClO4)4·H2O (RE = Nd, Eu, Dy)

Thermodynamical data of rare earth complexes with amino acid are important for engineering chemistry and fundamental chemistry. However, they have rarely been reported. In this work, a series of crystalline complexes of rare earth perchlorate coordinated with glutamic acid have been synthesized in water medium, and their thermodynamical data, including the heat capacity in low temperature range and the standard enthalpy of formation, were determined. These complexes were identified to be [RE₂(Glu)₂(H₂O)₈](ClO₄)₄·H₂O (RE = Nd, Eu, Dy) by using thermogravimetric analysis (TG), differential thermal analysis (DTA), and chemical and elementary analyses. Their purity has been determined. No melting points were observed for all the three complexes. The heat capacity of the complexes was measured by an adiabatic calorimeter from 79 to 370 K. Abnormal heat capacity values were detected for two of the complexes and the decomposition range of one complex was found. The temperature, enthalpy change and entropy change of the decomposition processes of the three complexes were calculated. The polynomial equations of heat capacity in the experimental temperature range have been obtained by least squares fitting. The standard enthalpy of formation was determined by an isoperibol reaction calorimeter at 298.15 K. Supported by the Research Fund of Beijing Institute of Petro-Chemical Technology (N06-06)     

Subsolidus area of the system CdO - V2O5 - Fe2O3

Phase diagrams in the subsolidus area of the systems FeVO₄ - CdO and FeVO₄ - Cd₂V₂O₇ have been deduced using the results of XRD and DTA analyses. On the basis of these diagrams and some additional verifying research, a projection of the subsolidus area of the CdO - V₂O₅ - Fe₂O₃ system onto the plane that comprises the components’ concentration triangle has been presented. The H-type phase is the only phase formed in this system. It co-exists at equilibrium with other phases in six subsidiary subsystems.      

Kinetic study of zirconia crystallization from amorphous ZrO2-SiO2 composite precursors processed by sol-gel chemistry

Powder precursor gels with composition xZrO₂·(100–x)SiO₂, with selected values of x=8, 24, 43 and 75 mol%, were processed by sol-gel chemistry. Differential thermal analysis (DTA) was used to study crystallization in (cubic/tetragonal)-ZrO₂ during the heating of the reactive amorphous precursors. Kinetic parameters such as activation energy, Avrami's exponent and frequency factor have been simultaneously calculated from the computed DTA data using a previously reported kinetic model. The crystallization temperature decreases relative to the increase in the amount of ZrO₂, the value of the kinetic parameter of the crystallization being related to the value of x.