Total synthesis of (+)-astrophylline

The first total synthesis of (+)-astrophylline (2) has been achieved, starting from readily available enantiomerically pure (+)-(1R,4S)-4-hydroxycyclopent-2-enyl acetate (11). A novel ruthenium-catalyzed ring-closing ring-opening ring-closing metathesis of carbocyclic olefins of general type 5 was the key step, providing the stereochemically well-defined bis-piperidyl skeleton of the target molecule. A [2,3]-Wittig-Still rearrangement of 9 was also employed as the critical transformation in the stereocontrolled generation of the 1,2-trans configuration of the cyclopentene intermediate 6c. Our early synthetic efforts toward 1,2-trans cyclopentene derivatives of type 6, as well as the synthetic pathway to an optimized 13-step total synthesis of 2 (12% overall yield), are reported.     

A one pot, metathesis-hydrogenation sequence for the selective formation of carbon-carbon bonds

A combination of homogeneous hydrogenation and metathesis reactions allows highly efficient, stepwise chemo- and stereoselective formation of three separate 2,7-diaminosuberic acid derivatives in a single pot without isolation of intermediates.     

Synthesis of eight-membered ring compounds using enyne metathesis

[reaction: see text] A novel procedure for synthesizing eight-membered ring compounds was developed using ruthenium-catalyzed enyne metathesis. When a CH2Cl2 solution of enyne connected with catechol, o-amino phenol, or o-phenylenediamine was stirred in the presence of benzylidene ruthenium carbene complex (10 mol %) at room temperature overnight, an eight-membered ring compound was obtained in high yield. In a similar manner, monocyclic 1,4-diaza- or 1-oxa-4-azacyclooctene derivative was obtained in high yield.     

Total synthesis of (+)-dihydrocuscohygrine and cuscohygrine

The first enantioselective synthesis of (+)-dihydrocuscohygrine 1 and cuscohygrine 2 is presented. 1 was obtained in nine steps and 30% overall yield with a ruthenium-catalyzed tandem ring rearrangement metathesis key step starting from enantiomerically pure cycloheptene-1,3,5-triol derivative 6. The unknown absolute configuration of natural dihydrocuscohygrine 1 could be determined as (S,S)-(-). Cuscohygrine 2 was obtained by Jones oxidation of 1 in quantitative yield but unfortunately with complete epimerization.     

以N-杂环卡宾为配体的金属络合物催化有机合成的反应

综述了近几年来以N-杂环卡宾为配体的金属络合物催化有机合成的反应。     

Enantioselective Synthesis of [b]-Annulated Azepane Scaffolds

Cyclopenta-, benzo-, and cyclohepta[b]-annulated azepane scaffolds were prepared in two steps from optically active cyclic α-allyl-β-oxoesters. The first step was ruthenium-catalyzed olefin cross metathesis with acrylonitrile. The second step was palladium-catalyzed dihydrogenation which consists of three consecutive processes: The hydrogenation of the C−C double and C−N triple bonds was followed by the reductive amination via the iminium ion formed in situ from the primary amino function and the endocyclic carbonyl group. This last step gave, stereoselectively, the annulated azepanes with relative trans-configuration. The amino function and the ester group define two points for further diversification of the scaffolds. The trifluoroacetyl derivatives allowed to establish the enantiopurity of the products to be 97–98 % ee by GLC on a chiral phase. The relative trans-configurations and in one case also the absolute (R,R)-configuration was established by X-ray crystallography.     

Stereoselective preparation of enantiomerically pure annulated carbohydrates using ring-closing metathesis

Ring-closing metathesis has been applied to a series of glucose derivatives to produce cyclopentene derivatives 5a and 5b, cyclohexene derivatives 8 and 9, cycloheptene 12, and cyclooctene 14. Spirocyclic dihydrofurans 19, 26a, and 26b, along with dihydropyran 22, were also produced. A range of fused oxepine derivatives 29a-c and one oxo-cyclononene 31 were also prepared. Cyclopentene 5b was subjected to a sequence of hydrogenation, NBS bromination, and treatment with powdered zinc to furnish the ring-expanded product 35. No such ring expansion occurred when the cyclohexaannulated compound 8 was treated with NBS followed by powdered zinc, leading to aldehyde 39. The spiro dihydrofuran derivative 19 was converted to the aldehyde 42 via the same reaction sequence used to fragment cyclopentene derivative 5b.     

Formal synthesis of TMC-69-6H via a one-pot enantioselective domino proline-mediated aldol/olefin homologation procedure

Enantioselective synthesis of TMC-69-6H was accomplished from readily accessible pyridone derivative via a domino proline-mediated aldol reaction/olefin homologation, followed by tandem ring-closing and cross metathesis.     

Synthesis of a novel, highly symmetric bis-oxa-bridged compound

A highly oxygenated, novel pentacyclic bis-oxa-bridged compound 8 was synthesized with remarkable efficiency starting from readily available tetrachloro-5,5-dimethoxyclopentadiene and 1,4-cyclohexadiene in three steps. The ruthenium-catalyzed oxidation of 2:1 bis-adduct 1 followed by a one-pot transformation of the resulting bis-alpha-diketone 3 furnished (after esterification) the title compound in an overall yield of 29.1%. The versatility of this simple method was further demonstrated with other norbornyl alpha-diketones to obtain the corresponding strained oxa-bridged derivatives.     

Efficient microwave-assisted formation of functionalized 2,5-dihydropyrroles using ruthenium-catalyzed ring-closing metathesis

A rapid method for the formation of functionalized 2,5-dihydropyrroles using ruthenium-catalyzed ring-closing metathesis under microwave irradiation is presented. The diene substrates were efficiently prepared from aza-Baylis-Hillman adducts.     

Stereocontrolled synthesis of 2-alkenyl-4-methylene tetrahydropyrans

A variety of 2-alkenyl-4-methylene tetrahydropyrans were synthesized via consecutive transition metal-catalyzed bond forming processes. In this approach, ruthenium-catalyzed coupling of homoallylic carbonates and homopropargylic alcohols generates substrates containing the requisite functionality for a palladium-mediated cyclization, thereby providing concise access to the target structures. The installation of a trisubstituted alkene at the C-2 position was achieved using an olefin cross metathesis process.     

Synthesis of nonracemic allylic hydroxy phosphonates via alkene cross metathesis

Allylic hydroxy phosphonates and their derivatives can be interconverted by using cross metathesis with second generation Grubbs catalyst. The absolute stereochemistry of the starting phosphonate is conserved in the product. Cross metathesis reaction of the acrolein-derived phosphonate 2a yields a series of functionalized allylic hydroxy phosphonates. However, the cross metathesis reaction is often accompanied by competing dimerization and alkene migration reactions leading to a reduction in yield. The cinnamaldehyde- and crotonaldehyde-derived phosphonates 2b and 2c were also examined. In general, the metathesis reactions of phosphonates 2b and 2c are considerably slower than those for phosphonate 2a leading to mixtures. Several hydroxyl-protected derivatives of the phosphonate 2a (methyl carbonate 3a, acetate 4a, N-tosyl carbamate 5a, TBDMS 6a, and acetoacetate 7a) undergo metathesis without competing side reactions to give substituted allylic phosphonates in good to excellent yield.     

DFT prediction and experimental observation of substrate-induced catalyst decomposition in ruthenium-catalyzed olefin metathesis

Ruthenacyclobutane decomposition, involving competitive beta-hydride transfer to Ru and reductive olefin elimination during ruthenium-catalyzed olefin metathesis, is predicted by density functional theory calculations and experimentally confirmed by propene and butene formation during degenerate Ru-methylidene-catalyzed metathesis of ethylene. The results provide new focus on the nature of ruthenium metathesis catalyst decomposition under catalytic conditions.     

Regio- and stereoselective synthesis of 2-amino-1,3-diene derivatives by ruthenium-catalyzed coupling of ynamides and ethylene

A ruthenium-catalyzed hydrovinylation-type cross-coupling of ynamides and ethylene proceeds via ruthenacyclopentene to give 2-aminobuta-1,3-diene derivatives in a highly regioselective manner. It was also demonstrated that 2-aminobuta-1,3-diene derivatives reacted with various dienophiles or singlet oxygen to give a cyclic enamide derivative.     

Prevention of undesirable isomerization during olefin metathesis

1,4-Benzoquinones have been found to prevent olefin isomerization of a number of allylic ethers and long-chain aliphatic alkenes during ruthenium-catalyzed olefin metathesis reactions. Electron-deficient benzoquinones are the most effective additives for the prevention of olefin migration. This mild, inexpensive, and effective method to block olefin isomerization increases the synthetic utility of olefin metathesis via improvement of overall product yield and purity.     

Efficient enantioselective synthesis of condensed and aromatic-ring-substituted tyrosine derivatives

An efficient access to both condensed and conjugated tyrosine analogues of high enantiomeric purity is described. Novel ring-substituted tyrosines were synthesized by Suzuki cross couplings of appropriately protected l-3-iodotyrosine with a series of activated and deactivated boronic acid derivatives to achieve the target compounds in high yields. d- and l-4-hydroxy-1-naphthylalanines were readily prepared from the corresponding alpha-enamide in two different approaches, by asymmetric hydrogenation as well as by unselective hydrogenation and enzymatic resolution of the racemic mixture.     

A new synthetic approach to phenol derivatives: use of ring-closing olefin metathesis

Phenol derivatives, which are one of the most important classes of aromatic compounds in organic chemistry, were synthesized by ruthenium-catalyzed ring-closing olefin metathesis (RCM) of 1,4,7-trien-3-ones with versatile substitution patterns. The RCM reaction for producing phenol derivatives was also successful with 1,5,7-trien-3-one as another precursor. Most of the phenols prepared here could not be obtained easily by conventional methods.     

Sequential Two-Fold Claisen Rearrangement,One-Pot Ring-Closing Metathesis and Cross-Metathesis as a Route to Substituted Benzo[b]azepine-2-one,Benzo[b]azepine and Benzo[b]oxepine Derivatives

A synthetic protocol involving sequential use of three atom-economic processes viz. Claisen rearrangement, ring-closing metathesis and cross metathesis has been developed to access 7-substituted benzo[b]azepine and benzo[b]oxepine derivatives starting from appropriate aniline or phenol in good overall yield. A one-pot RCM-CM protocol has also been developed for the synthesis of benzazepine and benzoxepine derivatives.     

Asymmetric multi-component reactions: convenient access to acyclic stereocenters and functionalized cyclopentenoids

Asymmetric multi-component reactions of optically active phenyl dihydrofuran, keto ester or N-tosyl imino ester, and allylsilane provided functionalized phenyl tetrahydrofurans with multiple stereogenic centers diastereoselectively. Cleavage of the resulting substituted tetrahydrofurans readily provided acyclic derivatives with three contiguous asymmetric centers via an acyloxycarbenium ion intermediate. Ring closing olefin metathesis, using Grubbs catalyst, afforded functionalized cyclopentene derivatives in optically active form. A one pot tandem tetrahydrofuran ring cleavage followed by ring closing olefin metathesis also provided functionalized cyclopentenes in good yield.     

A new approach to (-)-swainsonine by ruthenium-catalyzed ring rearrangement

A new enantioselective synthesis of the idolizidine alkaloid (-)-swainsonine 1 in 40% overall yield starting from the known oxazolidinone 6 is described. Throughout the synthesis, the high efficiency of metal-catalyzed reactions is illustrated. The key step is a new ruthenium-catalyzed metathesis rearrangement reaction. In this ring-closing/ring-opening tandem process, stereocenters are transferred from a ring to the olefinic side chain of the formed heterocycle. The metathesis precursor was obtained by palladium-catalyzed desymmetrization of cyclopentenediol. The synthesis was completed by functionalization of the terminal double bond, cyclization of the second ring, and diastereoselective dihydroxylation.