Electron paramagnetic resonance study of the reactions of tetrathiomolybdate with roussin salts and esters, and with some related iron nitrosyls

The tetrathiomolybdate ion [MoS₄]²⁻ reacts in DMF solution with Roussin esters Fe₂(SR)₂(NO)₄ (R = Me, Et, n-Pr, i-Pr, n-Bu,t-Bu, n-C₅H₁₁) to yield the paramagnetic iron nitrosyls [Fe(NO)₂(SR)₂]⁻ (1), [Fe(NO)₂(S₂MoS₂]⁻ (2) and [Fe(NO)(S₂MOS₂)₂]⁻ (3). The new complexes (2) and (3) have been characterized by EPR spectroscopy and the assignment to them of constitutions based respectively upon tetrahedral and square pyramidal iron is supported by EHMO calculations. Fe₂(SPh)₂(NO)₄ with [MoS₄]²⁻ yields only [Fe(NO)₂(SPh)₂]⁻, and preformed (3) reacts with PhS⁻ to give firstly EPR-silent species, and then [Fe(NO)₂(SPh)₂]⁻. The mononitrosyl (3) can also be formed by reaction of [MoS₄]²⁻ with [Fe₄S₃(NO)₇]⁻, Fe₄S₄(NO)₄, or Fe₂I₂(NO)₄.     

Isotopic exchange reactions between iron-sulphur-nitrosyl clusters and nitrite

The anion [Fe₄S₃(NO)₇]⁻ undergoes slow exchange with labelled nitrite [¹⁵NO₂]⁻ to yield a product [Fe₄S₃(¹⁴NO)(¹⁵NO)₆]⁻ in which complete isotopic exchange has occurred at the basal Fe(NO)₂ groups, but with no exchange at the apical Fe(NO) group. The neutral Fe₄S₄(NO)₄ reacts rapidly with [¹⁵NO₂⁻ to give fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and it is proposed that the conversion proceeds by fragmentation, followed by complete isotopic exchange and rapid reassembly. The binuclear anion [Fe₂S₂(NO)₄]²⁻ also yields, with [¹⁵NO₂]²⁻ in CD₂Cl₂ solution, the fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and a mechanism involving successive fragmentation, exchange and reassembly steps is proposed; however in aqueous solution, a clean exchange reaction occurs to give [Fe₂S₂(¹⁵NO)₄]²⁻. Neutral binuclear esters Fe₂(SR)₂(NO)₄ (R = Me, Et, or Ph) with [¹⁴NO₂]⁻ yield the mononuclear paramagnetic [Fe(¹⁴NO)₂(¹⁴NO₂)₂]⁻, and with [¹⁵NO₂]⁻ the analogous [Fe(¹⁵NO)₂(₁₅NO₂)₂]⁻.     

Resonance Rayleigh scattering, second-order scattering and frequency doubling scattering methods for the indirect determination of penicillin antibiotics based on the formation of Fe3[Fe(CN)6]2 nanoparticles

Under the HCl solution and heating condition, penicillin antibiotics such as amoxicillin (AMO), ampicillin (AMP), sodium cloxacillin (CLO), sodium carbenicillin (CAR) and sodium benzylpenicillin (BEN) could react with Fe(III) to produce Fe(II) which further reacted with Fe(CN)₆³⁻ to form a Fe₃[Fe(CN)₆]₂ complex. By virtue of hydrophobic force and Van der Waals force, the complex aggregated to form Fe₃[Fe(CN)₆]₂ nanoparticles with an average diameter of 45 nm. This resulted in a significant enhancement of resonance Rayleigh scattering (RRS) and non-linear scattering such as second-order scattering (SOS) and frequency doubling scattering (FDS). The increments of scattering intensity (ΔI) were directly proportional to the concentrations of the antibiotics in a certain range. The detection limits for the five penicillin antibiotics were 2.9–6.1 ng ml⁻¹ for RRS method, 4.0–6.8 ng ml⁻¹ for SOS method and 7.4–16.2 ng ml⁻¹ for FDS method, respectively. Among them, the RRS method exhibited the highest sensitivity and the AMO system was more sensitive than other antibiotics systems. Based on the above researches, a new highly sensitive and simple method for the indirect determination of penicillin antibiotics has been developed. It can be applied to the determination of penicillin antibiotics in capsule, tablet, human serum and urine samples. In this work, the spectral characteristics of absorption, RRS, SOS and FDS spectra, the optimum conditions of the reaction and the influencing factors were investigated. In addition, the reaction mechanism was discussed.     

[(Me3Sn)2(Me3Sb)M(CN)6]∞ (M = Fe, Ru): Neuartige Organo-Sn/Sb-Polymere von besonderer chemischer und thermischer stabilität

The thermally (decomp. temp. 300°C) and completely air stable, novel coordination polymers [(Me₃Sn^IV)₂(Me₃Sb^V)M^II(CN)₆]_∞ with M = Fe and Ru can be prepared by co-precipitation from aqueous solutions of Me₃SnCl, Me₃SbBr₂ and K₄[(M(CN)₆], or, alternatively, by the ion-exchange-like reaction of the polymers [A(Me₃Sn)₃M(CN)₆]_∞ (A⁺ = Et₄N⁺, Cp₂Co⁺, Me₃Sn⁺ etc.) with Me₃SbBr₂. IR-spectroscopic findings suggest a statistical distribution of quasi-octahedral M(CN-Sn··)_6-x(CNSb ··)_x building blocks (with x = 0–6) within a three-dimensional network.     

Recent studies on metal and metalloid bis(trimethylsilyl)methyls and the transformation of the bis(trimethylsilyl)methyl into the azaallyl and β-diketinimato ligands

Recent results (post-1990) on the synthesis and structures of bis(trimethylsilyl)methyls M(CHR₂)_m (R = SiMe₃) of metals and metalloids M are described, including those of the crystalline lipophilic [Na(μ-CHR₂)]_∞, [Rb(μ-CHR₂)(PMDETA)]₂, K₄(CHR₂)₄(PMDETA)₂, [Mg(CHR₂)(μ-CHR₂)]_∞, P(CHR₂)₂ (gaseous) and P₂(CHR₂)₄, [Yb(CHR₂)₂(OEt₂)₂] and [{Yb(CR₃)(μ-OEt)(OEt₂)}₂]; earlier information on other M(CHR₂)_m complexes and some of their adducts is tabulated. Treatment of M(CHR₂) (M = Li or K) with four different nitriles gave the X-ray-characterized azaallyls or β-diketinimates , and (LL′ = N(R)C(^tBu)CHR, L′L′ = N(R)C(Ph)C(H)C(Ph)NR, LL″ = N(R)C(Ph)NC(H)C(Ph)CHR, R = SiMe₃ and Ar = C₆H₃Me₂-2,5). The two lithium reagents were convenient sources of other metal azaallyls or β-diketinimates, including those of K, Co(II), Zr(IV), Sn(IV), Yb(II), Hf(IV) and U(VI)/U(III). Complexes having one or more of the bulky ligands [LL′]⁻, [L′L′]⁻, [LL]⁻, [LL″]⁻, [L″L]⁻, [LL]⁻ and [{N(R)C(^tBu)CH}₂C₆H₄-2]²⁻ are described and characterized (LL = N(H)C(Ph)C(H)C(Ph)NH, L″L = N(R)C(^tBu)C(H)C(Ph)NR, LL = N(R)C(^tBu)CHPh). Among the features of interest are (i) the contrasting tetrahedral or square-planar geometry for and , respectively, and (ii) olefin-polymerization catalytic activity of some of the zirconium(IV) chlorides.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

采用K₃[Fe(CN)₆]作为锌镍电池的电解液添加剂,克服了锌阳极的变形。此外,通过一系列实验设计和表征,探索了电解液中金属锌与K₃[Fe(CN)₆]的反应机理。通过XRD (X-ray diffraction)和XPS (X-ray photo-electron spectroscopy)测试,我们发现金属锌在KOH水溶液中能够与K₃[Fe(CN)₆]反应,将[Fe(CN)₆]^3–还原为[Fe(CN)₆]⁴⁻。添加K₃[Fe(CN)₆]的锌镍电池实现了更长的循环寿命,比不添加K₃[Fe(CN)₆]的锌镍电池长3倍以上。在相同循环次数下,改性电解质中锌阳极循环不仅形状变化较小,而且没有出现“死”锌现象,电极添加剂和粘结剂也没有发生偏析。此外,不同于一般的有机添加剂,K₃[Fe(CN)₆]的加入不仅不会增大电极的极化,还能够提高锌镍电池的放电容量和倍率性能。因此,考虑到这一改性策略有着较高的可行性和较低的成本,K₃[Fe(CN)₆]添加剂在锌镍电池的实际应用中具有极大的推广潜力。     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.     

Cyano-bridged bimetallic complexes of copper(II) with tetracyanonickelate(II). Crystal structure of [Cu(dpt)Ni(CN)4]

Five new complexes of composition [Cu(dpt)Ni(CN)₄] (1) (dpt=dipropylenetriamine), [Cu(dien)Ni(CN)₄]·2H₂O (2) (dien=diethylenetriamine), [Cu(N,N′-dimeen)Ni(CN)₄]·H₂O (3) (N,N′-dimeen=N,N′-dimethylethylenediamine), [Cu(N,N-dimeen)Ni(CN)₄]·H₂O (4) (N,N-dimeen=N,N-dimethylethylenediamine) and [Cu(trimeen)Ni(CN)₄] (5) (trimeen=N,N,N′-trimethylethylenediamine) have been obtained by the reactions of the mixture of Cu(ClO₄)₂·6H₂O, appropriate amine and K₂[Ni(CN)₄] in water and have been characterized by IR and UV–Vis spectroscopies and magnetic measurements. The crystal structure of [Cu(dpt)Ni(CN)₄] (1) has been determined by single-crystal X-ray analysis. The structure of 1 consists of a one-dimensional polymeric chain ---Cu(dpt)---NC---Ni(CN)₂---CN---Cu(dpt)--- in which the Cu(II) and Ni(II) atoms are linked by CN groups. The nickel atom is four coordinate with four cyanide-carbon atoms (two cyano groups are terminal and two cyano groups (in cis fashion) are bridged) in a square-planar arrangement and the copper atom is five coordinate with two cyanide-nitrogen and three dpt-nitrogen atoms, in a distorted square-pyramidal arrangement. The temperature dependence of magnetic susceptibility (2–300 K) was measured for compound 1. The magnetic investigation showed the presence of a very weak antiferromagnetic interaction (J=−0.16 cm⁻¹) between the copper atoms within each chain through the diamagnetic Ni(CN)₄ ²⁻ ions.     

Structural characterisation of [Pt(NH3)4]2[W(CN)8][NO3]·2H2O donor–acceptor complex

The bimetallic [Pt(NH₃)₄]₂[W(CN)₈][NO₃]·2H₂O is characterised by single-crystal X-ray diffraction [S.G.P2₁/m(11), a=8.0418(7), b=19.122(2), c=9.0812(6) Å, Z=2]. All platinum centres have the square-plane D_4h geometry with average dimensions Pt(1)–N 2.042(2) and Pt(2)–N 2.037(10) Å. The octacyanotungstate anion has the square-antiprismatic D_4d configuration with average dimensions W(1)–C 2.164(13), C–N 1.140(12), W(1)–N 3.303(5) Å. The structure exhibits two different mutual orientations of Pt versus W units resulting in Pt(2)–W(1), W(1)^* separations of 4.77(2), 4.55(2)^* and Pt(1)–W(1) of 6.331(8) Å. A centrosymmetric structure reveals groups of two distinct columns: the first is formed by intercalated NO₃⁻ between parallel [Pt(1)(NH₃)₄]²⁺ planes and the second consists of [W(CN)₈]³⁻ interlayered by, parallel to square faces of W-antiprisms, [Pt(2)(NH₃)₄]²⁺. The structure is stabilised through a three-dimensional hydrogen bond network via nitrogen atoms of cyanide ligands, hydrogen atoms of NH₃ ligands, water molecules and oxygen atoms of NO₃⁻ counteranions. The vibrational pattern and the range of ν(CN) frequencies attributable to the electronic environment of W(V) and W(IV) are consistent with the ground state Pt(II)↔W(V) charge transfer.     

Caractéristiques spectroscopiques des liaisons hydrogène N-H-N très fortes. Études des acides A3(CN)6, (A=H,D; M=Fe,Co) par spectroscopie de vibration

Infrared and Raman spectra of the polycrystalline complex cyanide acids H₃M^III(CN)₆ (M=Fe,Co) and their deutero analogues were investigated at 300 and 90K in the region 4000-100 cm⁻¹. The spectra indicate clearly that the site symmetry of the M(CN)₆³⁻ ion is C_3v for M=Fe and D_3d for M=Co. These conclusions are consistent with an asymmetric N-H·N bond in H₃Fe(CN)₆ and with a symmetric one in H₃Co(CN)₆. The N-H stretching frequencies are assigned as ca. 1100 cm⁻¹ (Fe) and as 560 cm⁻¹ (Co), the shift being related to the difference in the hydrogen bonding strength, 2.665 Å (Fe) and 2.582 Å (Co). The spectroscopic behaviour of these very short N-H·N bonds appears to be similar to that of the strong O-H·O bonds in type A (for M=Co) or type pseudo-A compounds (for M=Fe).     

Syntheses, X-ray structures, and reactions of ruthenium carbonyl complexes containing 1,1-dithiolates

Treatment of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ or [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] with uni-negative 1,1-dithiolate anions via potassium dimethyldithiocarbamate, sodium diethyldithiocarbamate, potassium tert-butylthioxanthate, and ammonium O,O′-diethylthiophosphate gives both monomeric and dimeric products of cis-[Ru(CO)₂(η²-(SS))₂] ((SS)⁻=Me₂NCS₂⁻ (1), Et₂NCS₂⁻ (2), ^tBuSCS₂⁻ (3), (EtO)₂PS₂⁻ (4)) and [Ru(CO)(η²-(Me₂NCS₂))(μ,η²-Me₂NCS₂)]₂ (5). The lightly stabilized MeCN ligands of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ are replaced more readily than the bound acetate ligands of [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] by thiolates to produce cis-[Ru(CO)₂(η²-(SS))₂] with less selectivity. Structures 1 and 5 were determined by X-ray crystallography. Although the two chelating dithiolates are cis to each other in 1, the dithiolates are trans to each other in each of the {Ru(CO)(η²-Me₂NCS₂)₂} fragment of 5. The dimeric product 5 can be prepared alternatively from the decarbonylation reaction of 1 with a suitable amount of Me₃NO in MeCN. However, the dimer [Ru(CO)(η²-Et₂NCS₂)(μ,η²-Et₂NCS₂)]₂ (6), prepared from the reaction of 2 with Me₃NO, has a structure different from 5. The spectral data of 6 probably indicate that the two chelating dithiolates are cis to each other in one {Ru(CO)(η²-Et₂NCS₂)₂}fragment but trans in the other. Both 5 and 6 react readily at ambient temperature with benzyl isocyanide to yield cis-[Ru(CO)(CNCH₂Ph)(η²-(SS))₂] ((SS)=Me₂NCS₂⁻ (7) and Et₂NCS₂⁻ (8)). A dimerization pathway for cis-[Ru(CO)₂(η²-(SS))₂] via decabonylation and isomerization is proposed.     

Optically active coordination compounds---XLVIII. Synthesis, resolution and interconversions of isomers of tris-salicylatocobaltate(III)

Stable aqueous solutions of the green ion [Co(sa1)₃]³⁻ (sa1 = dianion, C₆H₄( )(CO ), of salicylic acid, 2-hydroxybenzoic acid) are obtained from [Co(NH₃)₅ C1]C1₂ and an excess of salicylic acid. Several salts, [C][Co(sa1)₃] have been characterized, where C = [Co(NH₃)₆]³⁺ and [M(en)₃]³⁺ (M = Co or Rh, EN = 1,2-diamino-ethane). By using (+)-[Rh(en)₃]³⁺, optical resolution via less soluble diastereoisomeric salts has been achieved, and isomerization and racemization have been studied. Resolved tris-malonatocobaltate(III) has been used as a model. A novel thermochromism (77-293 K) in solid Δ(+)-[Rhen₃]Λ[Co(sa1)₃ is described.     

Flow injection chemiluminescence detection and solvent extraction for human skin ointment dexamethasone acetate absorption analysis and the reaction mechanism study

A flow-injection chemiluminescence (CL) method coupled with solvent extraction for the determination of dexamethasone acetate (DA) in ointment was presented in this paper. It was based on the enhancing effect of the studied drug on CL emission of luminol–K₃Fe(CN)₆ system. This method has the advantages of simple sample treatment, cheap instrumentation and rapid detection. Under the optimum conditions, relative CL intensities were proportional to DA concentrations in the 0.044–4.4 μg ml⁻¹ range. The limit of detection was 0.01 μg ml⁻¹ (3σ) for DA. The method was applied to DA quantification in commercial DA ointment pharmaceutical and to human skin DA absorption analysis. Experiments were performed to evaluate the nature of DA enhanced luminol–K₃Fe(CN)₆ CL reaction. Based on the experimental results, it was suggested that in this CL system, DA was oxidized by K₃Fe(CN)₆ to form a medium product (DAox), DAox oxidized luminol with a faster kinetic step comparing with K₃Fe(CN)₆ oxidized luminol to an active form. As a result, DA speed the luminol CL reaction, and finally intensified the CL signal.     

Kinetische und mechanistische untersuchungen von übergangsmetallkomplex-reaktionen : IX. Substitution von CO durch PPh3 in aminocarbinkomplexen: Präparative und kinetische untersuchungen

Pentacarbonyl(diethylaminocarbyne)chromium tetrafluoroborate, [(CO)₅₋ CrCNEt₂]BF₄ (I), reacts with PPh₃ with substitution of CO and formation of trans-tetracarbonyl(diethylaminocarbyne)triphenylphosphanechromium tetra-fluoroborate, trans-[PPh₃(CO)₄CrCNEt₂]BF₄ (III). Substitution of CO by PPh₃ in neutral trans-tetracarbonyl(halo)(diethylaminocarbyne)chromium complexes, trans-X(CO)₄CrCNEt₂ (IVa: X = Br, IVb: X = I), leads in a reversible reaction to the corresponding tricarbonyl complexes, mer-X(PPh₃)(CO)₃₋ CrNEt₂ (V), PPh₃ occupying the cis-position to the carbyne ligand. With PPh₃ in large excess both reactions follow a first-order rate law. This as well as the activation parameters (ΔH≠ = 104–113 kJ mol⁻¹, ΔS≠ = 64–71 J mol⁻¹ K⁻¹) indicate a dissociative mechanism.     

Synthesis and magnetism of the first tetranuclear copper(II)–iron(III) complexes of macrocyclic oxamides

Four novel tetranuclear macrocyclic complexes of the formula [(CuLⁱ)₃Fe](ClO₄)₃·3H₂O (i=1–4, Lⁱ are the dianions of the [14]N₄ and [15]N₄ macrocyclic oxamides, namely 2,3-dioxo-5,6:13,14-dibenzo-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene, 2,3-dioxo-5,6:13,14-dibenzo-9-methyl-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene and 2,3-dioxo-5,6:14,15-dibenzo-7,13-bis(ethoxycarbonyl)-1,4,8,12-tetraazacyclotetradeca-7,12-diene] have been prepared and characterized. These complexes are the first examples of oxamido-bridged Cu(II)–Fe(III) heterometallic species. Cryomagnetic studies on [(CuL¹)₃Fe](ClO₄)₃·3H₂O (1) and [(CuL³)₃Fe](ClO₄)₃·3H₂O (3) (77–300 K) revealed that the Cu(II) and Fe(III) ions interact antiferromagnetically through the oxamido bridge, with the exchange integral J=−30.8 cm⁻¹ for 1 and J=−28.7 cm⁻¹ for 3 based on . The interaction parameters have been compared with that of the related [Cu₃Mn] compound.     

The synthesis and lyotropic phase behaviour of some aquatetra(cyano)-dodecylaminoferrate(II) complexes

Some alkali and alkaline earth metal salts of the amphiphilic anion [Fe(CN)₄(H₂O)(C₁₂H₂₅NH₂)]^2- have been synthesized by reaction of [Fe(CN)₅NO]^3- with C₁₂H₂₅NH₂. Using optical microscopy, they have been shown to give a hexagonal (H₁) mesophase in water.     

Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.     

Reductive nitrosylation of tetraoxometallates—XVII. Molybdate-hydroxylamine-cyanide reaction, and synthesis and characterization of K2[Mo(NO)(CN)5] and (NMe4)2[Mo(NO)(CN)4]

A reaction condition is established which determines the nature of the products in the molybdate-hydroxylamine-cyanide reaction. With hydroxylamine always used in excess, it is the hydroxyl ion concentration of the reaction mixture which plays a vital role in determining whether K₄[Mo(NO)(CN)₅] or K₂[Mo(NO)(CN)₅] is obtained exclusively. The latter product is hereby reported for the first time. Its powder diffractogram being typical of a cubic system, a gross structural characterization has been made possible. The former under aqueous, aerobic conditions yields a new product, (NMe₄)₂[Mo(NO)(CN)₄].     

微生物燃料电池处理餐饮废水及同步发电性能研究

针对食堂餐饮废水,建立微生物燃料电池实验系统,研究微生物燃料电池废水处理与同步发电性能。首先使用Fe(NO3)3溶液作为阴极电解液进行实验,证明餐饮废水生物降解及产电的可行性;分别采用NaCl溶液和K3[Fe(CN)6]溶液作为阴极电解液进行对比实验,研究不同运行环境下微生物燃料电池的发电性能和污水净化效果。结果表明,采用NaCl溶液和K3[Fe(CN)6]溶液作为阴极电解液时的COD去除率分别是30%和22%左右,平均电流密度分别为5.6和5.2mA/m2。在污水稀释比为2∶1、NaCl电解液浓度为0.4mol/L的情况下,微生物燃料电池系统的发电性能和净水效果达到最佳状态,稳态电流密度为8.8mA/m2,COD去除率为33.3%。     

Synthetic [FeFe]-H2ase models bearing phosphino thioether chelating ligands

Through the oxidation-reduction combination procedure, the neutral tri-substituted {2Fe3S} complex 2 was synthesized by replacing the CO ligand in 1 with phosphine. This substitution leads to the Fe-Fe bonds in 1 and 2 with large Lewis basicity difference, i.e. △pK_a^MeCN~10.