The destruction of organic pollutants under mild reaction conditions: A review

A survey of the literature covering the destruction of organic pollutants accomplished under mild reaction conditions is presented. Technologies presented are segregated according to two main reaction pathways; oxidation and reduction. Sub-topics discussed are representative of the main component of the degradation system, including the following; electrochemical reactors, hydrogen as a reducing agent, zero-valent metals, biological based systems, photolytic processes, Fenton reaction, and a recently discovered process that is a form of room temperature and pressure oxygen activation.     

Transport and kinetics at microheterogeneous electrodes: Part III. Application to the photoelectrochemical decomposition of water

The transport and kinetics in a system involving two sets of microheterogeneous electrodes, which are designed to use solar radiation to split water into H₂ and O₂, are described. A reaction scheme involving fourteen different processes is considered. The conditions for an efficient system are derived. It is shown that the main problems are electrode selectivity and the loss of H₂ and O₂ by back reactions.     

Quasi-chemical model of self-assembly and the formation of kinetically controlled structures

A quasi-chemical model of self-assembly among identical objects is proposed. The model rests on two main premises: (a) larger ensembles are more stable and (b) have slower rates of transformation, growth, and decomposition. These statements result from all paired interactions in the considered ensemble. This formulation of self-assembly is shown to be conducive to the formation of large ensembles with sizes distributed normally in a fairly narrow range, and with the concentrations of smaller ensembles being negligible. The existence of two critical points follows from the model. One is a critical concentration that initiates self-assembly in the system when exceeded. The other is a critical ensemble size that sets a threshold for the self-driven growth of ensembles in the system. The growth of ensembles nearly ceases at a point far from equilibrium, and the mean ensemble size and the ensemble’s size distribution are under kinetic control. Stable structures of this kind (with kinetic control of their organization) can serve as models for many natural self-organized systems.     

Why have serine/threonine/tyrosine kinases been evolutionarily selected in eukaryotic signaling cascades?

The signal transduction systems of eukaryotes are different from those of prokaryotes with respect to their structures and mechanisms. The main signal transduction system of prokaryotes called the two-component system (TCS) is a one-step phosphorelay system composed of a histidine kinase (HK) while the central signal transduction system of eukaryotes called the mitogen-activated protein kinase (MAPK) cascade system (MCS) is a multi-step phosphorelay system composed of serine/threonine/tyrosine kinases (STYKs). The two signal transduction systems are also different in their transphosphorylation mechanisms. HK in the TCS transfers its own phosphate group to the response regulator protein while STYKs in the MCS phosphorylate other proteins using ATP. We were intrigued by the different dynamics resulting from such differences and wondered why STYKs instead of HKs have been evolutionarily selected in eukaryotic signaling cascades. In this paper, we compared the dynamical characteristics of two mathematical models which reflect such differences between the TCS and the MCS, and found that STYKs are more appropriate for cascade structures in eukaryotic signal transduction than HK with respect to the duration and settling time of response signals.     

Hybrid finite element and Brownian dynamics method for diffusion-controlled reactions

Diffusion is often the rate determining step in many biological processes. Currently, the two main computational methods for studying diffusion are stochastic methods, such as Brownian dynamics, and continuum methods, such as the finite element method. This paper proposes a new hybrid diffusion method that couples the strengths of each of these two methods. The method is derived for a general multidimensional system, and is presented using a basic test case for 1D linear and radially symmetric diffusion systems.     

Interphase compatibilization of composites with immiscible blends as matrix: Glass beads filled nylon 6 / polypropylene blend-composite

The effect of a filler on the compatibility of an immiscible Nylon 6/polypropylene blend is studied. A compatibilized system with maleic anhydride grafted polypropylene is used as a reference. Dynamic mechanical analysis, differential scanning calorimetry and scanning electron microscopy measurements are performed for these two distinct systems containing treated and non-treated glass spheres. An improvement of the properties towards surface-induced compatibilization is observed when the filler surface is treated with a suitable silane coupling agent. Changes in the viscosity and main relaxations of the studied system are correlated with the presence of the filler and with its surface treatment. The crystallinity, adhesion and morphology behavior supports the rheological results. In this system, the filler takes not only the usual role of reinforcing material but also a new role as modifier of the interphase structure.     

TiO2/UV/O2和TiO2/UV/N2体系降解水中对氯硝基苯

以商用TiO₂P25为催化剂,分别在TiO₂/UV/O₂和TiO₂/UV/N₂两种体系下进行降解对氯硝基苯(pCNB)试验.采用ESR对两种体系下光催化反应形成的·OH进行测定,利用LC-MS对两种体系下反应形成的中间产物进行了定性和定量分析,最后对pCNB降解过程中氯和硝基的存在形式进行了研究.结果表明:TiO₂/UV/O₂体系的催化降解效果要明显优于TiO₂/UV/N₂体系;两种反应体系都有·OH产生,并且TiO₂/UV/O₂体系产生的·OH的量多于TiO₂/UV/N₂体系产生的·OH的量;TiO₂/UV/O₂体系形成的中间产物的种类要多于TiO₂/UV/N₂体系形成的,苯环上的氢、氯、硝基均可被·OH取代形成对硝基酚(pNP)、5-氯-2-硝基酚(5-C-2-PN)等酚类物质;两种体系下均有Cl^-和NO₂^-存在,其中Cl^-生成势与pCNB的去除势一致,只有TiO₂/UV/O₂体系中存在NO₃^-.     

A new system of gamma-ray spectrometry for activation analysis

A new system of γ-ray spectrometry has been designed and constructed. This system performs a precise, quick and automatic activation analysis using our nuclear reactor (TRIGA-II Research Reactor) as a neutron source. The main components are detector system consisted of a high resolution Ge(Li) detector settled in a shielding cabinet and a well-type NaI(Tl) scintillation counter for anti-Compton measurement, and data acquisition and spectra analysis system performed independently by two mini computer. The system has operated for atmospheric aerosols as an example of activation analysis.     

Determination of bromazepam in plasma and of its main metabolites in urine by reversed-phase high-performance liquid chromatography

A high-performance liquid chromatographic method for the determination of bromazepam in plasma and of its main metabolites in urine is described. The unchanged drug is extracted from plasma with dichloromethane, using Extrelut 1 extraction tubes. The residue from this extract is subsequently analysed by reversed-phase high-performance liquid chromatography with ultraviolet detection (230 nm). The limit of detection is 6 ng/ml of plasma, using a 1-ml specimen. For the determination of the metabolites, the urine samples are incubated to effect enzymatic deconjugation and are then extracted with dichloromethane. Following two clean-up steps (back extractions), the final residue is analysed on the same reversed-phase system as the plasma samples. The limit of detection for the two metabolites is 200 ng/ml.     

Studies of the regioselective ring-opening–closing mode of functionally different thiazolidine type enaminones: en route to the synthesis of trithiaazapentalene derivatives

Trithiaazapentalene derivatives were prepared by the reaction of 2-alkylidene-4-oxothiazolidines with Lawesson's reagent. They are classified as two structurally different trithiaazapentalene compounds that have different contributions of monocyclic 1,2-dithiole and 1,2,4-dithiazole structures and degrees of aromaticity of the bicyclic trithiaazapentalene system. The electron-donating ability of substituents at the C(5) position of the trithiaazapentalene system is recognized as the main cause for changes in π-electron distribution. This is the first complete study of substituent effects on the structure of trithiapentalenes.     

A process for preparation of anticancer drug 9-nitro camptothecin

Camptothecin and some of its semisythetic derivatives such as topotecan, irinotecan and 9-nitrocamptothecin, have exhibited strong antitumor activity against various experimental tumor model. The water insoluble 9-nitrocamptothecin demonstrated very potent antitumor activity against many different types of human cancers and HIV. Literature procedures for preparing 9-nitrocamptothecin are direct nitration of camptothecin using a concentrated nitric/concentrated sulfuric acid system or a combin…     

Isolation and purification of diastereoisomeric flavonolignans from silymarin by binary‐column recycling preparative high‐performance liquid chromatography

Silymarin extracted from Silybum marianum (L.) Gaertn consists of a large number of flavonolignans, of which diastereoisomeric flavonolignans including silybin A and silybin B, and isosilybin A and isosilybin B are the main bioactive components, whose preparation from the crude extracts is still a difficult task. In this work, binary‐column recycling preparative high‐performance liquid chromatography systems without sample loop trapping, where two columns were switched alternately via one or two six‐port switching valves, were established and successfully applied to the isolation and purification of the four diastereoisomeric flavonolignans from silymarin. The proposed system showed significant advantages over conventional preparative high‐performance liquid chromatography with a single column in increasing efficiency and reducing the cost. To obtain the same amounts of products, the proposed system spends only one tenth of the time that the conventional system spends, and needs only one eleventh of the solvent that the conventional system consumes. Using the proposed system, the four diastereoisomers were successfully isolated from silymarin with purities over 98%.     

Intermolecular Charge‐Transfer Interactions Facilitate Two‐Photon Absorption in Styrylpyridine–Tetracyanobenzene Cocrystals

Cocrystals of 4‐styrylpyridine and 1,2,4,5‐tetracyanobenzene were successfully prepared by supramolecular self‐assembly. Donor–acceptor interactions between the molecular components are the main driving force for self‐assembly and contribute to intermolecular charge transfer. The cocrystals possess two‐photon absorption properties that are not observed in the individual components; suggesting that two‐photon absorption originates from intermolecular charge‐transfer interactions in the donor–acceptor system. The origin of two‐photon absorption in multichromophore systems remains under‐researched; thus, the system offers a rare demonstration of two‐photon absorption by cocrystallization. Cocrystal engineering may facilitate further design and development of novel materials for nonlinear optical and optoelectronic applications.     

Modeling research in low-medium temperature geothermal field, Tianjin

The geothermal reservoir in Tianjin can be divided into two parts: the upper one is theporous medium reservoir in the Tertiary system; the lower one includes the basement reservoir inLower Paleozoic and Middle-Upper Proterozoic. Hot springs are exposed in the northern mountainand confined geothermal water is imbedded in the southern plain. The geothermal reservoir is in-cised by several fractures. In recent years, TDS of the geothermal water have gone up along withthe production rate increasing, along the eastern fracture zone (Cangdong Fracture and West Bai-tangkou Fracture). This means that the northern fracture system is the main seepage channel ofthe deep circulation geothermal water, and the reservoir has good connection in a certain area anddefinite direction. The isotopic research about hydrogen and carbon chronology indicates that themain recharge period of geothermal water is the Holocene Epoch, the pluvial and chilly period of20 kaBP. The karst conduits in weathered carbonate rocks of the Proterozoic and Lower Paleozoicand the northeast regional fracture system are the main feeding channels of Tianjin geothermalwater. Since the Holocene epoch, the geothermal water stayed at a sealed warm period. Thetracer test in WR45 doublet system shows that the tracer test is a very effective measure forunderstanding the reservoir's transport nature and predicting the cooling time and transportvelocity during the reinjection. 3-D numerical simulation shows that if the reinjection well keeps asuitable distance from the production well, reinjection will be a highly effective measure to extractmore thermal energy from the rock matrix. The cooling of the production well will not be a problem.     

Modeling research in low-medium temperature geothermal field,Tianjin

The geothermal reservoir in Tianjin can be divided into two parts: the upper one is the porous medium reservoir in the Tertiary system; the lower one includes the basement reservoir in Lower Paleozoic and Middle-Upper Proterozoic. Hot springs are exposed in the northern mountain and confined geothermal water is imbedded in the southern plain. The geothermal reservoir is incised by several fractures. In recent years, TDS of the geothermal water have gone up along with the production rate increasing, along the eastern fracture zone (Cangdong Fracture and West Bai-tangkou Fracture). This means that the northern fracture system is the main seepage channel of the deep circulation geothermal water, and the reservoir has good connection in a certain area and definite direction. The isotopic research about hydrogen and carbon chronology indicates that the main recharge period of geothermal water is the Holocene Epoch, the pluvial and chilly period of 20 kaBP. The karst conduits in weathered carbonate rocks of the Proterozoic and Lower Paleozoic and the northeast regional fracture system are the main feeding channels of Tianjin geothermal water. Since the Holocene epoch, the geothermal water stayed at a sealed warm period. The tracer test in WR45 doublet system shows that the tracer test is a very effective measure for understanding the reservoir’s transport nature and predicting the cooling time and transport velocity during the reinjection. 3-D numerical simulation shows that if the reinjection well keeps a suitable distance from the production well, reinjection will be a highly effective measure to extract more thermal energy from the rock matrix. The cooling of the production well will not be a problem.

     

Modeling research in low-medium temperature geothermal field,Tianjin

The geothermal reservoir in Tianjin can be divided into two parts: the upper one is the porous medium reservoir in the Tertiary system; the lower one includes the basement reservoir in Lower Paleozoic and Middle-Upper Proterozoic. Hot springs are exposed in the northern mountain and confined geothermal water is imbedded in the southern plain. The geothermal reservoir is incised by several fractures. In recent years, TDS of the geothermal water have gone up along with the production rate increasing, along the eastern fracture zone (Cangdong Fracture and West Bai-tangkou Fracture). This means that the northern fracture system is the main seepage channel of the deep circulation geothermal water, and the reservoir has good connection in a certain area and definite direction. The isotopic research about hydrogen and carbon chronology indicates that the main recharge period of geothermal water is the Holocene Epoch, the pluvial and chilly period of 20 kaBP. The karst conduits in weathered carbonate rocks of the Proterozoic and Lower Paleozoic and the northeast regional fracture system are the main feeding channels of Tianjin geothermal water. Since the Holocene epoch, the geothermal water stayed at a sealed warm period. The tracer test in WR45 doublet system shows that the tracer test is a very effective measure for understanding the reservoir’s transport nature and predicting the cooling time and transport velocity during the reinjection. 3-D numerical simulation shows that if the reinjection well keeps a suitable distance from the production well, reinjection will be a highly effective measure to extract more thermal energy from the rock matrix. The cooling of the production well will not be a problem.     

Microemulsion structure in the lenticular monophasic areas of brine/SDS/pentanol/dodecane or hexane systems: electrochemical and fluorescent studies

The properties of pseudo-ternary systems involving brine, sodium dodecylsulfate (SDS), pentanol and dodecane or hexane have been investigated. When the hydrocarbon is dodecane, the microemulsion system includes in addition to the main monophasic area a small lens inserted in an oil-rich zone. With hexane, the microemulsion domain splits into two parts, one of which consists of a narrow scythe-blade shaped area which spreads from the water top up to compositions very rich in hydrocarbon. The properties of these uncommon microemulsions were compared with those of microemulsions belonging to the main monophasic area in order to gain additional understanding of their structure. Results of experiments including electrical conductivity and viscosity measurements, electrochemical and fluorescent probe studies lead to the following conclusions: Microemulsions of the small lens of the brine/SDS/pentanol/dodecane system exhibit properties which are reminiscent of structures with at once water and oil countinuous phases. Microemulsions of the lenticular area of the brine/SDS/pentanol/ hexane system seem to undergo the same structural transitions as microemulsions of systems which present a single monophasic area: water-continuous, bicontinuous and oilcontinuous structures.     

人工智能味觉系统：概念、结构与方法

本文将传统的味觉传感器、人工味觉、电子舌等研究统一纳入人工智能味觉的框架中，提出了人工智能味觉的概念、结构及方法学问题。在传统分析科学中，非特异性感应是一个极力避免的现象，而交互感应传感器阵列则是将其作为基本出发点，设计构建成一个优化的组合，使得人工智能化学感受在技术上得以实现，交互感应理论和技术也因此成为其核心概念。作为一种仿生感觉技术，人工智能味觉系统是由交互感应电极及阵列、自学习专家数据库和智能模式识别三部分构成；电位法和伏安法是两类主要的传感方法；传感器材料包括贵金属及稀土金属、类脂/聚合物、硫属玻璃、导电聚合物以及其它如碳糊、酞菁、普鲁士蓝等；主成分分析和人工神经网络是智能识别过程中主要的模式识别工具。导电聚合物修饰电化学传感器和多技术联用分析方法目前已成为人工智能味觉系统研究的两个重要发展方向。