Oxidation of Tricarbonyl (η1 η2-but-3-en-1-yl)iron(0)and Tricarbonyl (η3-allyl)iron(0) Anion Complexes with Dioxygen

The addition of reactive carbanions to tricarbonyl(η⁴-1,3-diene)iron(0) complexes proceeded at ?78 °C to give putative tricarbonyl(η¹,η²-but-3-en-1-y1)iron(0) anion complexes and at 25 °C to produce postulated tricarbonyl(η³-allyl)iron(O) anion complexes; trapping of reactive intermediates with dioxygen produced γ,δ-unsaturated acids and allylic alcohols, respectively.     

Nucleophilic Fluoroalkylation of α,β‐Unsaturated Carbonyl Compounds with α‐Fluorinated Sulfones: Investigation of the Reversibility of 1,2‐Additions and the Formation of 1,4‐Adducts

A detailed investigation of the reactions of PhSO₂CF₂H and PhSO₂CH₂F with (E)‐chalcone (=(E)‐1,3‐diphenylprop‐2‐en‐1‐one) at low temperatures revealed that these two reactions were kinetically controlled, and the ratios of 1,2‐ vs. 1,4‐adducts, which did not change much over time at these temperatures, reflect the relative rates of the two reaction pathways. The controlled experiments of converting the PhSO₂CF₂‐ and PhSO₂CHF‐substituted 1,2‐adducts to 1,4‐adducts showed that these isomerizations are not favored due to the low stability and hard‐soft nature of PhSO₂CF and PhSO₂CHF^? anions. Moreover, taking advantage of the remarkable stability and softness of (PhSO₂)₂CF^? anion, an efficient thermodynamically controlled isomerization of (PhSO₂)₂CF‐substituted 1,2‐adduct to 1,4‐adduct was achieved for the first time.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Palladium‐catalyzed cyclization of β‐bromo‐α,β‐unsaturated ketones with arylhydrazines leading to 3‐substituted 1‐aryl‐1 H‐pyrazoles

β‐Bromo‐α,β‐unsaturated ketones are condensed with arylhydrazines to form hydrazones, which are in situ intramolecularly cyclized into 3‐substituted 1‐aryl‐1 H‐pyrazoles under a catalytic system of Pd(OAc)₂/1,3‐bis(diphenylhosphino)propane (dppp)/NaO^tBu. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Catalytic Asymmetric 1,3‐Dipolar Cycloaddition of β‐Fluoroalkylated α,β‐Unsaturated 2‐Pyridylsulfones with Nitrones for Chiral Fluoroalkylated Isoxazolidines and γ‐Amino Alcohols

2‐Pyridylsulfone‐ and fluoroalkylated group‐activated olefins underwent highly efficient diastereo‐ and enantioselective 1,3‐dipolar cycloadditions across various aromatic and aliphatic nitrones in the presence of a chiral Ni^II/bis(oxazoline) catalyst. The process was tuned by 4 Å molecular sieves, chiral bis(oxazoline) ligands, reaction solvents, and temperature. A wide array of optically pure fluoroalkylated isoxazolidines were obtained, thus facilitating the asymmetric synthesis of an enantioenriched α‐trifluoromethylated γ‐amino alcohol in gram‐scale and a trifluoromethylated derivative of 1,3‐oxazinan‐2‐one with potential pharmaceutical interest. A stereochemical model, based on the absolute configuration of one adduct and some control experiments, was postulated to account for the observed endo‐ and enantioselectivity.     

Photolysis of α,β‐Epoxyketones: A Green Synthesis of β‐Hydroxyenones through Tandem H‐Abstraction,Ring Cleavage and Isomerisation

The photochemical behavior of various substituted epoxycarbonyl compounds consisting of more than one possible photo‐labile site (i.e. δ‐hydrogen, β‐hydrogen and epoxide ring) has been investigated. These compounds on photo‐irradiation produced the β‐hydroxyenones in an eco‐friendly green approach. Mechanistically, these photo‐transformations have been envisaged to occur via an intramolecular β‐hydrogen abstraction by the carbonyl group of benzoyl moiety to generate the 1,3‐biradical followed by epoxide ring opening that isomerizes into the photoproducts. The photolysis of the probed epoxy ketones didn’t furnish any photoproduct through δ‐hydrogen abstraction, whatsoever. This exclusive preference for β‐H abstraction over δ‐H abstraction by carbonyl group has been vindicated by the MM2 energy mini‐ mized program for the investigated photochemical substrates. The structures of these photoproducts were established from the analysis of their spectral parameters (IR, ¹H/¹³C NMR and Mass) and single crystal X‐ray crystallography data.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Synthesis,characterization and α‐amylase and α‐glucosidase inhibition studies of novel vanadyl chalcone complexes

A series of chalcone ligands and their corresponding vanadyl complexes of composition [VO (L^I–IV)₂(H₂O)₂]SO₄ (where L^I = 1,3‐Diphenylprop‐2‐en‐1‐one, L^II = 3‐(2‐Hydroxy‐phenyl)‐1‐phenyl‐propenone, L^III = 3‐(3‐Nitro‐phenyl)‐1‐phenyl‐propenone, L^IV = 3‐(4‐Methoxy‐phenyl)‐1‐phenyl‐propenone) have been synthesized and characterized using various spectroscopic (Fourier‐transform infrared, electrospray ionization mass, nuclear magnetic resonance, electron paramagnetic resonance, thermogravimetric analysis, vibrating sample magnetometer) and physico‐analytic techniques. Antidiabetic activities of synthesized complexes along with chalcones were evaluated by performing in vitro and in silico α‐amylase and α‐glucosidase inhibition studies. The obtained results displayed moderate to significant inhibition activity against both the enzymes by vanadyl chalcone complexes. The most potent complexes were further investigated for the enzyme kinetic studies and displayed the mixed inhibition for both the enzymes. Further, antioxidant activity of vanadyl chalcone complexes was evaluated for their efficiency to release oxidative stress using 2,2‐diphenyl‐1‐picryl‐hydrazyl‐hydrate assay, and two complexes (Complexes 2 and 4 ) have demonstrated remarkable antioxidant activity. All the complexes were found to possess promising antidiabetic and antioxidant potential.     

An efficient and convenient transformation of α-haloketones to α-hydroxyketones using cesium formate

A new safe and convenient transformation has been developed. In the presence of cesium formate in dry MeOH solution, α-haloketones underwent direct conversion reaction to afford α-hydroxyketone in excellent yields. Furthermore, this methodology can be extended and applied in 2-chloro-N-(1,3-diphenyl-1H-pyrazol-5-yl)acetamide, 2-chloro-N-(2,6-dimethylphen-yl)acetamide, 1-(bromomethylsulfonyl)benzene, and N-(bromomethyl)phthalimide to give the corresponding products in moderate to excellent yields.     

Polymer-Attached Thiazolium Salts-Catalyzed Addition of Aldehydes to α, β-Unsaturated Carbonyl Compounds

A homogeneous catalyst, 3-benzyl-5-(2-hydroxyethyl)-4-methyl-1,3-thiazolium chloride, for addition of aldehydes to activated double bond, was attached to 20% cross-linked polystyrene-divinylbenzene copolymer. The attached catalysts could be easily removed from the reaction mixture. Polymer-attached thiazolium salts in the presence of triethylamine are active catalysts for addition of aromatic and aliphatic aldehydes to α,β-unsaturated ketones to yield γ-diketones.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Reaction of Tricarbonyl(η3-allyl)iron(0) Anions with Bromine

The addition of reactive carbanions to tricarbonyl(η⁴-1,3-diene)iron(0) complexes proceeded at 23°C to give putative tricarbonyl(η³-allyl)iron(0) anion complexes. Trapping of the reactive intermediates with bromine produced nucleophilic-substituted tricarbonyl(η⁴-1,3-diene)iron(0) complexes.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

α-Peroxyamines

α-Peroxyamines contain the group , which may also be incorporated into a ring. Numerous compounds of this type are accessible, inter alia, from ketones, hydrogen peroxide, or alkyl hydroperoxides and ammonia, as well as by autoxidation or photo-oxidation of amines or imines. Apart from decomposition reactions, the chemistry of these compounds is characterized by interesting cyclizations to give lactams, imides, oxaziridines, tetroxanes, etc.     

Organocatalytic Enantioselective Synthesis of Tetrasubstituted α‐Amino Allenoates by Dearomative γ‐Addition of 2,3‐Disubstituted Indoles to β,γ‐Alkynyl‐α‐imino Esters

The first asymmetric synthesis of tetrasubstituted α‐amino allenoates by a chiral phosphoric acid catalyzed dearomative γ‐addition reaction of 2,3‐disubstituted indoles to β,γ‐alkynyl‐α‐imino esters is reported. This method provides access to a series of highly functionalized tetrasubstituted allenes featuring quaternary stereocenters in high yields, and with excellent regio‐, diastereo‐, and enantioselectivities under mild conditions without by‐product formation. Representative large‐scale reactions and diverse transformations of the products into various scaffolds with potential biological activities render are also disclosed. The mechanism of the reaction was elucidated by control reactions and DFT calculations.     

Iodine(III)‐Catalyzed Rearrangements of Imides: A Versatile Route to α,α‐Dialkylated α‐Hydroxy Carboxylamides

A tertiary hydroxy group α to a carboxyl moiety comprises a key structural motif in many bioactive substances. With the herein presented metal‐free rearrangement of imides triggered by hypervalent λ³‐iodane, an easy and selective way to gain access to such a compound class, namely α,α‐disubstituted‐α‐hydroxy carboxylamides, was established. Their additional methylene bromide side chain constitutes a useful handle for rapid diversification, as demonstrated by a series of further functionalizations. Moreover, the in situ formation of an iodine(III) species under the reaction conditions was proven. Our findings clearly corroborate that hypervalent λ³‐benziodoxolones are involved in these organocatalytic reactions.     

Reactions of 3, 5-Dimethyl-4-Carbethoxy-2-Cyclohexen-1-One at α-Position

3, 5-Dimethyl-4-carbethoxy-2-cyclohexen-1-one has been synthesized through the Knoevenagel condensation¹, which is then subjected to alkylation and acylation at α-position. The resulting products are hydrolyzed and decarboxylated to α-substituted cyclohexenones. 3, 5-Dimethyl-2-cyclohexen-1-one is converted by N-bromosuccinimide to phenol via enolization².     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.