Edge Plane Pyrolytic Graphite Electrodes for Halide Detection in Aqueous Solutions

The behavior of chloride, bromide and iodide at edge plane pyrolytic graphite electrodes has been explored in aqueous acid solutions. The voltammetric response in each case has been compared with that of basal plane pyrolytic graphite, glassy carbon and boron‐doped diamond. The electrochemical oxidation of chloride is found to only occur on boron‐doped diamond while the electrochemical reversibility for the oxidation of bromide on edge plane pyrolytic graphite is similar to that seen at glassy carbon whilst being superior to basal plane pyrolytic graphite and boron‐doped diamond. In the case of iodide oxidation, edge plane and basal plane pyrolytic graphite and glassy carbon display similar electrode kinetics but are all superior to boron‐doped diamond. The analytical possibilities were examined using the edge plane pyrolytic graphite electrode for both iodide and bromine where is was found that, based on cyclic voltammetry, detection limits in the order of 10^?6 M are possible.     

Electrochemical Oxidation of Berberine and of Its Oxidation Products at a Glassy Carbon Electrode

The electrochemical behavior of berberine, an isoquinoline plant alkaloid with a wide spectrum of physiological effects, was studied at a glassy carbon electrode using cyclic, differential pulse and square‐wave voltammetry. The oxidation of berberine is a quasireversible, diffusion‐controlled process and occurred in a cascade mechanism with the formation of several oxidation products. The diffusion coefficient of berberine was calculated from cyclic voltammetry studies to be D=1.69×10^?6 cm² s^?1. The oxidation process of berberine is also pH dependent and the number of electrons and protons transferred was determined using differential pulse voltammetry. The formation of several oxidation products that adsorbed at the glassy carbon electrode surface was observed and their electrochemical behavior characterized. A mechanism for the oxidation of berberine at a glassy carbon electrode was proposed.     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

Electrochemical and Spectroscopic Studies on the Interaction of Gatifloxacin,Moxifloxacin and Sparfloxacin with DNA and Their Analytical Applications

The electrochemical oxidation of the three fluoroquinolone drugs FQs: gatifloxacin GTF, moxifloxacin MXF and sparfloxacin SPF, at the bare and DNA‐modified glassy carbon electrodes has been studied by voltammetric techniques. The three FQs showed one irreversible oxidation peak at potential range 0.85–0.91 V vs. Ag‐AgCl, in phosphate buffer of pH 7.0. Differential pulse voltammetry (DPV) and UV‐absorption spectroscopic techniques were employed to probe the interaction between the FQs and calf thymus double stranded deoxyribonucleic acid (ds CT‐DNA). From electrochemical data, the binding constant between DNA and the gatifloxacin, moxifloxacin and sparfloxacin are calculated to be 3228, 2596 and 2857 M^?1 respectively. Based on electrochemical and spectroscopic results, the mode of binding of fluoroquinolone to DNA through combined effect of intercalation and electrostatic interaction was concluded. A detection scheme based on a preconcentration and differential pulse voltammetric (DPV) determination at dsDNA modified glassy carbon electrode (DNA/GCE) was proposed for the trace determination of the studied analytes. The developed method was successfully applied to the determination of the FQs in pharmaceutical formulations.     

Direct Oxidation of Ascorbic Acid at an Edge Plane Pyrolytic Graphite Electrode: A Comparison of the Electroanalytical Response with Other Carbon Electrodes

The direct electrochemical oxidation of ascorbic acid at an edge plane pyrolytic graphite electrode (EPPG) is investigated and compared with other common carbon‐based electrodes, specifically glassy carbon, boron doped diamond and basal plane pyrolytic graphite. It is found that the EPPG electrode shows a significantly higher degree of electrochemical reversibility than the other electrode substrates giving rise to an analytically optimized limit of detection and sensitivity of 7.1×10^?5 M and 0.065 A M^?1 respectively.     

Carbon‐Supported Pt Particles as a Catalyst for Electrooxidation of Methanol and Cyclic Voltammetry Studies Under Acidic Conditions

Electrooxidation of methanol on glassy carbon (GC) electrode modified by optimum carbon supported Pt electrocatalyst (Pt‐C/GC) in acid media is investigated. The catalyst is prepared by ultrasonicating Pt/C powders in aqueous media. The activity of prepared Pt‐C/GC electrode is studied in potential range of 0–1000 mV (versus SCE) by cyclic voltammetry. The results showed that the Pt/C dispersed layer at the surface of glassy carbon electrode, behaves as an electrocatalyst for the oxidation of methanol in acid medium by optimum loading of Pt (0.2 mg cm^?2). The electrochemical properties of prepared electrode are studied under various conditions. However the effect of various parameters in the catalytic enhancement of Pt/C, such as platinum loading, sulfuric acid concentration, different scan rates, different final potentials, and medium temperature are considered and examined.     

Electrocatalytic Oxidation and Direct Determination of L-Tyrosine by Square Wave Voltammetry at Multi-wall Carbon Nanotubes Modified Glassy Carbon Electrodes

The electrochemical behavior of L-tyrosine was investigated at a multi-wall carbon nanotubes modified glassy carbon electrode. L-tyrosine itself showed a poor electrochemical response at the bare glassy carbon electrode; however, a multi-wall carbon nanotubes film fabricated on the glassy carbon electrode can directly enhance the electrochemical signal of L-tyrosine when applying cyclic voltammetry and square wave stripping voltammetry without any mediator. Cyclic voltammetry was carried out to study the electrochemical oxidation mechanism of L-tyrosine, which shows a totally irreversible process and an oxidation potential of 671 mV at the modified electrode and 728 mV at the bare electrode, ΔE_p = 57 mV. The anodic peak current linearly increases with the square root of scan rate in the low range, suggesting that the oxidation of L-tyrosine on the multi-wall carbon nanotubes modified electrode is a diffusion-controlled process. The square wave stripping voltammetry currents of L-tyrosine at the multi-wall carbon nanotubes modified electrodes increased linearly with the concentration in the range of 2.0 × 10⁻⁶–5.0 × 10⁻⁴ mol L⁻¹. The detection limit was 4.0 × 10⁻⁷ mol L⁻¹. The method is simple, quick, sensitive and accurate.     

Electrochemical Detection of 2‐Naphthol at a Glassy Carbon Electrode Modified with Tosflex Film

In this study, a Tosflex (a perfluoro‐anion‐exchange membrane) modified glassy carbon electrode has been used to detect 2‐naphthalenol (2‐naphthol) in aqueous solutions in order to demonstrate the electroanalytical application of Tosflex. 2‐naphthol polymerizes upon electrochemical oxidation at a glassy carbon electrode; however, the current related to this oxidation is too small for analytical purpose at low concentration level. A Tosflex polymer modified glassy carbon electrode (TFGCE) was found of having capability to improve the detection limit because 2‐naphthol molecules deprotonated in basic solutions to form 2‐naphtholate anions that were accumulated to TFGCE by the anion‐exchange characteristic of Tosflex. The accumulated 2‐naphtholate anions were determined with the following differential pulse voltammetry. With 3 minutes accumulation at +0.05 V, the dependence of oxidation current versus concentration was linear from 8×10^?7 M to 1×10^?5 M with a regression coefficient of 0.999 and a detection limit of 2×10^?7 M. Unlike many other anion‐exchange polymer modified electrodes, the TFGCE is stable at highly basic condition.     

Amperometric Sensor for Detection of the Reduced Form of Nicotinamide Adenine Dinucleotide Using a Poly(pyronin B) Film Modified Electrode

An electrochemical method for the preparation of poly(pyronin B) film was proposed in this paper. A poly(pyronin B) (poly(PyB)) film modified glassy carbon electrode (GCE) has been fabricated via an electrochemical oxidation procedure and applied to the electrocatalytic oxidation of reduced form of nicotinamide adenine dinucleotide (NADH). The poly(PyB) film modified electrode surface has been characterized by atomic force microscope (AFM), scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS), UV‐visible absorption spectrophotometry (UV‐vis) and cyclic voltammetry (CV). These studies have been used to investigate the poly(PyB) film, which demonstrates the formation of the polymer film and the excellent electroactivity of poly(PyB) in neutral and even in alkaline media. Due to its potent catalytic effects towards the electrooxidation of NADH at lower potential (0.0 V), poly(PyB) film modified electrode can be used for the selective determination of NADH in real samples because of dopamine, ascorbic acid and uric acid oxidation can be avoided at this potential. The catalytic peak currents are linearly dependent on the concentrations of NADH in the range of 1.0×10^?6 to 5.0×10^?4 mol/L with correlation coefficients of 0.999. The detection limits for NADH is 0.5×10^?6 mol/L. Poly(PyB) modified electrode also shows good stability and reproducibility due to the irreversible attachment of polymer film at GCE surface.     

Electrochemical Oxidation of Desipramine Drug in the Presence of 4,6‐Dimethylpyrimidine‐2‐thiol Nucleophile in Aqueous Acidic Medium

Electrochemical oxidation of desipramine (DES) has been studied in the presence of 4,6‐dimethylpyrimidine‐2‐thiol (DMPT) as nucleophile in acidic medium by means of cyclic voltammetry, controlled‐potential electrolysis and spectroscopic data, as diagnostic techniques. Voltammetric studies of electro‐oxidation of desipramine were realized in a range of pH 1.0 to 8.0 in the absence and presence of DMPT. The results indicate the participation of the product of electrochemical oxidation of desipramine in the reaction with DMPT with ECEC electrochemical mechanism. However, the voltammetry and coulometry results imply existence of a catalytic (EC′) electrochemical mechanism in parallel with ECEC electrochemical mechanism. The product has been characterized by IR, ¹H NMR, ¹³C NMR and MS methods.     

Electrochemical Oxidation of Sanguinarine and of Its Oxidation Products at a Glassy Carbon Electrode – Relevance to Intracellular Effects

The electrochemical behavior of sanguinarine, a quaternary benzophenanthridine glycoside alkaloid with antimicrobial, anti‐inflammatory, antioxidant and/or immune‐stimulatory activities, was studied at a glassy carbon electrode using cyclic, differential pulse, and square wave voltammetry. The oxidation of sanguinarine is a quasireversible, diffusion‐controlled process and occurred in a cascade mechanism with the formation of several oxidation products which adsorbed at the electrode surface. The oxidation of sanguinarine is pH dependent and involves the transfer of the same number of electrons and protons. The adsorbed sanguinarine oxidation products are reversibly oxidized at the glassy carbon electrode surface and their oxidation for a wide range of pHs was also studied by differential pulse and square wave voltammetry. A mechanism for the oxidation of sanguinarine at glassy carbon electrode is proposed.     

Electroanalytical Characteristics of Amisulpride and Voltammetric Determination of the Drug in Pharmaceuticals and Biological Media

The electrochemical oxidation of antipsychotic drug amisulpride (AMS) has been studied in pH range 1.8–11.0 at a stationary glassy carbon electrode by cyclic, differential pulse and square‐wave voltammetry. Two oxidation processes were produced in different supporting electrolyte media. Both of the oxidation processes were irreversible and exhibited diffusion controlled. For analytical purposes, very resolved voltammetric peaks were obtained using differential pulse and square‐wave modes. The linear response was obtained in the range of 4×10^?6 to 6×10^?4 M for the first and second oxidation steps in Britton‐Robinson buffer at pH 7.0 and pH 3.0 (20% methanol v/v), respectively, using both techniques. These methods were used for the determination of AMS in tablets. The first oxidation process was chosen as indicative of the analysis of AMS in biological media. The methods were successfully applied to spiked human serum, urine and simulated gastric fluid samples.     

Electrochemical oxidation and determination of high-molecular-weight sterically hindered phenols

The use of differential pulse voltammetry for the determination of Irganox 1010, a sterically hindered phenol used as an antioxidant, prompted an investigation of the electrochemical behavior of several other commercially available high-molecular-weight hindered phenols used as antioxidants and stabilizers. Although these compounds generally have at least two phenol groups per molecule, their electrochemical behavior is similar to that of simpler hindered phenols such as 2,4,6-tri-t-butylphenol. Detection limits ranging from 1.3 to 8.2 ppm were obtained in a methanol—0.07 M sulfuric acid medium. The oxidation of alkylphenols in neutral or acidic media is accompanied by follow-up chemical reactions, leading to formation of passivating films on the surface of the glassy carbon electrode. In alkaline media, the corresponding phenoxide is oxidized electrochemically to the corresponding stable phenoxy radical and filming can be avoided.     

纳米碳管电极上氧的电催化还原

以聚四氟乙烯为粘结剂制成了多壁纳米碳管（MWNT）电极.采用恒电位阶跃法和循环伏安法研究了MWNT电极在碱性溶液中的电化学行为，并对碱性溶液中溶解氧在该电极上的电化学还原行为进行了研究.实验结果表明： MWNT电极具有比石墨电极更高的孔隙率和电化学表面积；MWNT电极上O2还原成的反应为准可逆过程；在5～50 mV•s－1的扫描速率范围内，阴极峰电流与扫描速度成线性关系，表明MWNT电极上O2还原成的反应受吸附控制；对碱性溶液中的氧还原反应， MWNT比石墨具有更高的催化活性.     

Electrochemical Oxidation of Metolazone at a Glassy Carbon Electrode

Metolazone is a diuretic agent used in patients with edematous states and/or hypertension. The electrochemical behavior of metolazone on a glassy carbon electrode was investigated using cyclic, differential pulse, and square‐wave voltammetry at different pHs. The pH dependent oxidation of metolazone occurs in two consecutive steps in a diffusion‐controlled mechanism and involves the formation of a main oxidation product. The first oxidation process is reversible, and involves two electrons and two protons corresponding to the oxidation of nitrogen in the sulfonamide moiety. The second oxidation process is irreversible, also occurs in the sulfonamide moiety, involves a one electron‐transfer, and is followed by deprotonation to produce a cation radical, which reacts with water and yields a hydroxylated product. The diffusion coefficient of metolazone was calculated to be 3.43×10^?6 cm² s^?1 in pH 7.0 0.1 M phosphate buffer.     

The Mn‐zeolite/Graphite Modified Glassy Carbon Electrode: Fabrication,Characterization and Analytical Applications

In this work, low‐cost and environmentally friendly natural zeolite exchanged with Mn²⁺ cations was used for the first time to modify the glassy carbon electrode with the aim to obtain a fast and simple sensor for voltammetric determination of paracetamol (PAR). The Mn‐zeolite/graphite modified glassy carbon electrode (MnZG?GCE) was prepared by evaporation of solvent from dispersion of the zeolite/graphite mixture with the polymer in acetone. The electrochemical characteristics of MnZG?GCE were conducted by electrochemical impedance spectroscopy and cyclic voltammetry. Compared with graphite modified GCE (G?GCE), MnZG?GCE exhibited better electrochemical parameters, which confirms the superiority of applying zeolite in the proposed sensor. The optimization of the pH‐value of supporting electrolyte and instrumental parameters were carried out. The peak current was proportional to the concentration of PAR in a phosphate buffer saline of pH 6.0 in the range from 0.029 to 0.69 mg L^?1 (R=0.9997) with limit of detection of 8.8 μg L^?1. Finally, the proposed electrode was successfully applied to determine the paracetamol in pharmaceutical formulation and certified reference materials. The satisfactory recoveries, which ranged from 89.2 to 102.7 %, were obtained for all studied samples. It confirmed the attractiveness of relatively inexpensive, easy to fabricate and non‐toxic MnZG?GCE in determination of PAR in complicated matrixes.     

Voltammetry of Benzo[a]pyrene in Aqueous and Nonaqueous Media: Adsorptive Stripping Voltammetric Determination at Pencil Graphite Electrode

A detailed study of the electrochemical oxidation of Benzo[a]pyrene (BaP) at the glassy carbon and pencil graphite electrodes was carried out in aqueous and nonaqueous media. Using square‐wave stripping mode, the compound yielded a well‐defined voltammetric response at pencil graphite electrode in acetate buffer, pH 4.8 at +1.13 V (vs. Ag/AgCl) (a preconcentration step being carried out at a fixed potential of +0.70 V for 180 s). The process could be used to determine BaP concentrations in the range 0.25–1.25 μM, with a detection limit of 0.027 μM (6.82 μg L^?1). The applicability to assay of spiked human urine samples was also illustrated.     

Direct Electrochemical Determination of Glyphosate at Copper Phthalocyanine/Multiwalled Carbon Nanotube Film Electrodes

A copper phthalocyanine/multiwalled carbon nanotube film‐modified glassy carbon electrode has been used for the determination of the herbicide glyphosate (Gly) at ?50 mV vs. SCE by electrochemical oxidation using differential pulse voltammetry (DPV). Cyclic voltammetry and electrochemical impedance spectroscopy showed that Gly is adsorbed on the metallic centre of the copper phthalocyanine molecule, with formation of Gly‐copper ion complexes. An analytical method was developed using DPV in pH 7.4 phosphate buffer solution, without any pretreatment steps: Gly was determined in the concentration range of 0.83–9.90 μmol L^?1, with detection limit 12.2 nmol L^?1 (2.02 μg L^?1).     

Electrochemical Sensor Based on Oxidation of 2,8‐Dihydroxyadenine to Monitor DNA Damage in Calf Thymus DNA

A novel and reliable direct electrochemical method has been established to monitor DNA damage in acid hydrolyzed calf thymus DNA, based on the determination of 2,8‐dihydroxyadenine (2,8‐DHA). A single‐wall carbon nanotubes (SWCNT) modified edge plane pyrolytic graphite electrode (EPPGE) has been used as a sensor to monitor the DNA damage. 2,8‐DHA the main in vivo adenine oxidation product undergoes oxidation at ～395 mV at SWCNT modified EPPGE using square wave voltammetry (SWV). The sensor exhibits potent and persistent electron‐mediating behavior. A well‐defined oxidation peak for the oxidation of 2,8‐DHA was observed at modified electrode with lowering of peak potential and increase in peak current as compared to bare EPPGE. At optimal experimental conditions, the catalytic oxidative peak current was responsive with the 2,8‐DHA concentrations ranging from 0.05 nM to 100 nM. The detection limit was 3.8×10^?11 M and limit of quantification was 1.27×10^?10 M. The modified electrode exhibited high stability and reproducibility.     

Kinetic studies of glucose electrocatalytic oxidation on GC/Ni electrode

Nickel‐modified glassy carbon electrode (GC/Ni) prepared by galvanostatic deposition was used for the electrocatalytic oxidation of glucose in alkaline solutions where different electrochemical methods were employed. In cyclic voltammetry studies, in the presence of glucose an increase in the peak current of the oxidation of nickel hydroxide is followed by a decrease in the corresponding cathodic current. This suggests that the oxidation of glucose is being catalyzed through mediated electron transfer across the nickel hydroxide layer comprising nickel ions of various valence states. Under the chronoamperometric regime, the reaction followed a Cottrellian behavior and the diffusion coefficient of glucose was found to be 8 × 10^?6 cm² s^?1. A mechanism based on the electrochemical generation of Ni³⁺‐active sites and their subsequent consumptions by glucose has been discussed, and kinetic parameters have been derived. The heterogeneous rate constants for the oxidation of glucose at the surface of modified electrodes were determined by rotating disk electrode using the Koutecky–Levich plots, which are in agreement with the data obtained by chronoamperometry. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 712–721, 2012