Performance evaluation of nickel as anode catalyst for DMFC in acidic and alkaline medium

Direct methanol fuel cell (DMFC) research is highly focused due to its high energy density, portability and inexpensive. In the present study conventional platinum catalyst used for methanol oxidation is being replaced with nickel catalyst supported over nickel mesh. The electrode is synthesized by single step electro deposition technique. Synthesized electrode was characterized by SEM, EDAX and AFM techniques to know the surface morphology, composition and thickness of the catalyst respectively. The electro catalytic behavior of the nickel for methanol oxidation was evaluated using cyclic voltammetry technique. As the DMFC is compatible with both the acidic and alkaline electrolytes the working of the nickel mesh electrode is analyzed in both media. The results showed maximum current density of 0.025 and 0.030 A/cm² in alkaline and acidic medium respectively with less potential around 0.4 and 0.2 V. The other parameters such as varying the concentration of methanol, electrolyte medium, scan rate and thickness of the catalytic layer were analyzed and optimized.     

乙醇在不同介质中电氧化的原位表面增强拉曼光谱研究

采用常规电化学伏安技术和电化学原位表面增强拉曼光谱(in-situ SERS)技术研究了不同介质中乙醇在粗糙铂电极上的电催化氧化行为. 发现不论在酸性、中性还是碱性介质中, 乙醇均能在粗糙铂电极上自发氧化解离生成强吸附中间体CO; 碱性介质中, CO在粗糙铂电极上基本氧化完全的电位(0.20 V)比中性和酸性介质中(0.50 V)负移了约0.30 V. 而乙醇在粗糙铂电极上CV正向扫描的氧化峰电位(-0.20 V)比酸性介质中(0.65 V)负移了约0.85 V. 比较不同介质中乙醇和CO在粗糙铂电极上的氧化峰电流和峰电位可以发现, 粗糙铂电极在碱性介质中对乙醇和CO的电催化氧化活性比中性和酸性介质中更强; 可以推测, 不论在酸性、中性还是碱性介质中, 乙醇在粗糙铂电极上的氧化过程均按双途径机理进行.     

Acidic Media Impedes Tandem Catalysis Reaction Pathways in Electrochemical CO2 Reduction

Electrochemical CO₂ reduction (CO₂R) in acidic media with Cu-based catalysts tends to suffer from lowered selectivity towards multicarbon products. This could in principle be mitigated using tandem catalysis, whereby the *CO coverage on Cu is increased by introducing a CO generating catalyst (e.g. Ag) in close proximity. Although this has seen significant success in neutral/alkaline media, here we report that such a strategy becomes impeded in acidic electrolyte. This was investigated through the co-reduction of ¹³CO₂/¹²CO mixtures using a series of Cu and CuAg catalysts. These experiments provide strong evidence for the occurrence of tandem catalysis in neutral media and its curtailment under acidic conditions. Density functional theory simulations suggest that the presence of H₃O⁺ weakens the *CO binding energy of Cu, preventing effective utilization of tandem-supplied CO. Our findings also provide other unanticipated insights into the tandem catalysis reaction pathway and important design considerations for effective CO₂R in acidic media.     

Aqueous Photoelectrochemical CO2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO₂ reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO₂ to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of −0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s⁻¹. To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO₂ to methanol. This work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO₂ reduction to CO and methanol.     

酸性溶液中钯催化醇电化学氧化的研究

应用电化学循环伏安法(CV)和现场红外光谱(FTIR),研究了酸性溶液中钯催化甲醇、乙二醇电氧化的过程.结果表明:在酸性和中性介质中,甲醇和乙二醇在多晶Pd电极上氧化须在1.5V以上才能发生.随着溶液pH值的降低,过电位减小且峰电流密度上升.溶液的pH值以及电极表面形成的吸附含氧物种对Pd电催化氧化醇有显著的影响.现场红外光谱电化学测试显示,在高电位和强酸性介质中,乙二醇在Pd电极上的氧化产物主要是CO2和少量的乙二酸.在酸性和中性介质中,无论在低电位或高电位,甲醇和乙二醇在Pd上氧化的主要产物是CO2,没有发现CO的存在,说明该氧化过程CO2是经过非毒化的路径产生的.     

甲酸在Pt-Ru/GC电极上氧化的SERS研究

采用循环伏安(CV)法、计时电流法和电化学原位表面增强拉曼散射光谱(SERS)技术研究了甲酸在Pt-Ru/GC电极上的氧化行为, 发现甲酸在Pt-Ru/GC电极上与在粗糙Pt电极上一样, 也能自发解离出强吸附中间体CO和活性中间体—COO－. 从分子水平证实钌的加入有利于提高电极对甲酸的电催化氧化活性, 当镀液中Pt：Ru的摩尔比从10∶1变化到1∶1, CO的氧化峰电位从0.41 V负移至0.35 V, 约负移了60 mV. Pt-Ru/GC(1∶1)电极与粗糙Pt电极相比, CO在电极表面氧化完毕的电位亦负移了约200 mV. 该研究结果表明, 电化学原位表面增强拉曼散射光谱技术可望成为研究电催化反应机理的普适谱学工具.     

Adsorption of 4-aminopyridine on Co and Ag electrodes probed by SERS

The adsorption of 4-aminopyridine (4-AP) on Co and Ag electrodes in acid or alkaline solutions of KCl and KI electrolyte salts were monitored by the Surface-enhanced Raman Spectroscopy (SERS) technique. The SERS intensity for the Ag electrode was in 2 orders of magnitude higher than for the Co electrode, due to the enhancement of the Raman cross-section on Ag by the surface-plasmon excitation. In acidic chloride medium (pH 4), the SERS results for Ag electrodes indicate that the protonated form of 4-AP (4-APH⁺) adsorbs in the potential range of −0.1 to −0.6 V (Ag|AgCl|KCl sat) through hydrogen-bonding between 4-APH⁺ and Cl⁻ adsorbed on the electrode surface; at more negative potentials the neutral form 4-AP is the predominant adsorbed species. For Co electrode in the same medium, only bands due to neutral 4-AP were observed in the spectra at −0.8 and −0.9 V. For more negative potentials bands assigned to both 4-AP and 4-AP surface complex are observed, with the lasts being enhanced, as the potentials are turned more negative. In alkaline chloride medium (pH 13), for less negative potentials the bands assigned to free 4-AP were observed in the spectra of both Ag and Co surfaces. For more negative potentials, only bands assigned to the 4-AP surface complex were observed. For 0.1 mol L⁻¹ KI acidic or alkaline solutions, bands assigned to 4-AP and 4-APH⁺ were observed in a wider potential range than in chloride solutions. An adsorption scheme of 4-AP on Ag and Co is proposed for acidic and alkaline solutions.     

On-line mass spectrometry investigation of the reduction of carbon dioxide in acidic media on polycrystalline Pt

Differential electrochemical mass spectrometry (DEMS) is used to investigate the reaction of electroreduction of CO₂ on platinum porous electrode in acidic media. This technique, which gives molecular specificity, permits the reaction products to be followed concurrently with potential and time. These results showed for the first time the on-line production of methanol in acidic media using a Pt electrodeposited electrode. Reduction of CO₂ in perchloric acid on Pt occurs in the H₂ evolution region leading to the formation of formic acid methanol and traces of methane. Experiments using CO show that this substance is the intermediate of the pathway leading to methanol.     

A Study on the Electrochemical and Electrochemiluminescent Behavior of Homogentisic Acid at Carbon Electrodes

The electrochemical oxidation and electrochemiluminescent behavior of homogentisic acid (HGA) has been studied in aqueous solutions over a wide pH range by linear sweep voltammetry, cyclic voltammetry, chronocoulometry at a glassy carbon electrode, by controlled potential electrolysis at a large area spectroscopic graphite electrode, and by spectroelectrochemistry at an optically transparent drilled holes graphite (DHG) electrode in a thin‐layer cell. The studies reveal that the electrochemical oxidation of HGA at carbon electrodes is a reversible process involving two‐electron, two‐proton transfer. In addition to the electrochemical oxidation, the chemical oxidation of HGA by dissolved oxygen was investigated by spectroscopic method combined with voltammetry. It was revealed that HGA is fairly stable in strongly acidic media but readily oxidized by dissolved oxygen in alkaline media giving rise to 1,4‐benzoquinone‐2‐acetic acid, the same product as that of electrooxidation of HGA. This oxidation product is stable in acidic, neutral and weakly alkaline media, but can further degrade in strongly alkaline media yielding oxalate as the final product. The electrochemiluminescent mechanism of HGA in the presence of Ru(bpy)₃²⁺ at a glassy carbon electrode was also investigated in detail, based on which a sensitive ECL method for determination of HGA was developed, and the detection limit was 3.0×10^?8 mol L^?1.     

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media

The large-scale deployment of CO₂ electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO₂ loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO₂ methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH₄ Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO₂ electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH₄ selectivity and carbon utilization by modifying Cu catalysts with supramolecules.     

Pt-Ru supported on double-walled carbon nanotubes as high-performance anode catalysts for direct methanol fuel cells

Pt-Ru supported on carbon nanotubes (CNTs) (single-walled nanotubes, double-walled nanotubes (DWNTs), and multi-walled nanotubes) catalysts are prepared by an ethylene glycol reduction method. Pt-Ru nanoparticles with a diameter of 2-3 nm and narrow particle size distributions are uniformly deposited onto the CNTs. A simple and fast filtration method followed by a hot-press film transfer is employed to prepare the anode catalyst layer on a Nafion membrane. The Pt-Ru/DWNTs catalyst shows the highest specific activity for methanol oxidation reaction in rotating disk electrode experiments and the highest performance as an anode catalyst in direct methanol fuel cell (DMFC) single cell tests. The DMFC single cell with Pt-Ru/DWNTs (50 wt %, 0.34 mg Pt-Ru/cm(2)) produces a 68% enhancement of power density, and at the same time, an 83% reduction of Pt-Ru electrode loading when compared to Pt-Ru/C (40 wt %, 2.0 mg Pt-Ru/cm(2)).     

Electrocatalytic oxidation of methanol on a glassy carbon modified electrode by bis(1,2-phenylenediamine) nickel(II) complex

Electrocatalytic oxidation of methanol on a glassy carbon electrode coated with Ni(II)-(1,2-phenylendiamine)₂ (GC/NiOPD), conditioned by the potential recycling in a potential range of 100–650 mV (vs. SCE) is studied by cyclic voltammetry in an alkaline medium (0.10 M NaOH). The results show that the NiOPD layer formed at the surface of the electrode behaves as an efficient electrocatalyst for the oxidation of methanol in the alkaline medium via the Ni(III) species with a cross exchange reaction occurring throughout the layer at a low concentration of methanol. The effects of various parameters such as potential scan rates, methanol concentration and NiOPD surface concentration on the electro-oxidation of methanol are also investigated.     

Controlled-potential electrosynthesis of glucosaminic acid from glucosamine at a gold electrode

The electrocatalytic oxidation of d-glucosamine (2-amino-2-deoxy-d-glucose) in alkaline and neutral solutions was examined using a carbon felt electrode modified with 2 nm core sized gold nanoparticles (Au_2 nm nanoparticles) and a gold plate electrode. The electrocatalytic voltammetric oxidation curves of d-glucosamine were obtained in both solutions. The voltammetric responses for the electrocatalytic oxidation at a Au_2 nm nanoparticle-modified electrode in both alkaline and neutral solutions were almost the same to those at a gold plate electrode. The oxidized product was identified to be d-glucosaminic acid (2-amino-2-deoxy- d-gluconic acid) generated by the 2-electron oxidation product of d-glucosamine by electrospray ionization time-of-flight mass spectra (ESI TOF-MS). The HPLC results also indicated that the oxidation product was d-glucosaminic acid.The controlled-potential electrolysis of d-glucosamine was performed at the Au_2 nm nanoparticle-modified carbon felt electrodes in both alkaline and neutral solutions. In the alkaline solution, at a potential of −0.2 V, d-glucosaminic acid was formed with a current efficiency of 100%. In the neutral solution, electrolysis at 0.4 V on d-glucosaminic acid was obtained with current efficiencies of 70%.     

Covalently Grafting Graphene onto Si Photocathode to Expedite Aqueous Photoelectrochemical CO2 Reduction

Silicon semiconductor functionalized with molecular catalysts emerges as a promising cathode for photoelectrochemical (PEC) CO₂ reduction reaction (CO₂RR). However, the limited kinetics and stabilities remains a major hurdle for the development of such composites. We herein report an assembling strategy of silicon photocathodes via chemically grafting a conductive graphene layer onto the surface of n⁺-p Si followed by catalyst immobilization. The covalently-linked graphene layer effectively enhances the photogenerated carriers transfer between the cathode and the reduction catalyst, and improves the operating stability of the electrode. Strikingly, we demonstrate that altering the stacking configuration of the immobilized cobalt tetraphenylporphyrin (CoTPP) catalyst through calcination can further enhance the electron transfer rate and the PEC performance. At the end, the graphene-coated Si cathode immobilized with CoTPP catalyst managed to sustain a stable 1-Sun photocurrent of −1.65 mA cm⁻² over 16 h for CO production in water at a near neutral potential of −0.1 V vs. reversible hydrogen electrode. This represents a remarkable improvement of PEC CO₂RR performance in contrast to the reported photocathodes functionalized with molecular catalysts.     

Electrochemical carbon dioxide and bicarbonate reduction on copper in weakly alkaline media

The electrochemical reduction of CO₂ on copper is an intensively studied reaction. However, there has not been much attention for CO₂ reduction on copper in alkaline electrolytes, because this creates a carbonate buffer in which CO₂ is converted in HCO₃ ^? and the pH of the electrolyte decreases. Here, we show that electrolytes with phosphate buffers, which start off in the alkaline region and, after saturation with CO₂, end up in the neutral region, behave differently compared to CO₂ reduction in phosphate buffers which starts off in the neutral region. In initially alkaline buffers, a reduction peak is observed, which is not seen in neutral buffer solutions. In contrast with earlier literature reports, we show that this peak is not due to the formation of a CO adlayer on the electrode surface but due to the production of formate via direct bicarbonate reduction. The intensity of the reduction peak is influenced by electrode morphology and the identity of the cations and anions in solution. It is found that a copper nanoparticle-covered electrode gives a rise in intensity in comparison with mechanically polished and electropolished electrodes. The peak is observed in the SO₄ ^2?-, ClO₄ ^?-, and Cl^?- containing electrolytes, but the formate-forming peak is not seen with Br^? and I^?.     

B,N Co-Doped Three-Dimensional Carbon Aerogels with Excellent Electrochemical Performance for the Oxygen Reduction Reaction

Herein, an ordinary and mass-production approach is reported to synthesize boron (B) and nitrogen (N) co-doped three-dimensional (3D) carbon aerogels (CA) by using glucose and borax as the raw materials by a simple hydrothermal method and then carbonization in NH₃ atmosphere. The porous material (BN-CA-900) possesses a large specific surface area (1032 m² g⁻¹) and high contents of doped pyridinic N and graphitic N. The onset potential (0.91 V vs. reversible hydrogen electrode, RHE), half-wave potential (0.77 V vs. RHE), and current density (5.70 mA cm⁻² at 0.2 V vs. RHE) of BN-CA-900 for ORR are similar to those of commercial Pt/C, indicating that BN-CA-900 has a comparable catalytic activity with Pt/C in alkaline media. The number of electron transfer is 3.86–3.99 and the yield of hydrogen peroxide is less than 6.8 %. BN-CA-900 also presents decent catalytic performance in acidic medium. Moreover, the stability and methanol tolerance of BN-CA-900 are superior to commercial Pt/C in both alkaline and acidic media. The prepared BN-CA-900 is a promising candidate that may be applied in other areas, such as the adsorption of pollution, porous conductive electrodes, and lithium-ion batteries.     

Molecular Modification of Single Cobalt Sites Boosts the Catalytic Activity of CO2 Electroreduction into CO

Electroreduction of CO₂ into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Co SAs-Pc). The anchoring of phthalocyanine with Co sites enabled electron transfer from Co sites to CO₂ effectively via the π-conjugated system, resulting in high catalytic performance of CO₂ electroreduction into CO. During the process of CO₂ electroreduction, the Faradaic efficiency (FE) of Co SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Co SAs-Pc for CO was −11.3 mA cm⁻² at −0.8 V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86 times greater than those of Co SAs (−0.60 mA cm⁻²) and commercial Co phthalocyanine (−3.95 mA cm⁻²), respectively. In an H-cell system operating at −0.8 V vs RHE over 10 h, the current density and FE for CO of Co SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Co SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO₂ activation.     

Effects of thermal activation on the oxidation pathways of methanol at bulk Pt–Ru alloy electrodes

The competition between pathways that lead to adsorbed CO and CO₂ during the electrochemical oxidation of 1.0 M methanol in 0.1 M HClO₄ on two bulk Pt–Ru alloys (10 at.% Ru (X_Ru≈0.1) and 90 at.% Ru (X_Ru≈0.9)) was investigated for temperatures in the range of 25–80°C. On the high Ru content alloy studied (X_Ru≈0.9), the dissociative chemisorption of methanol was inhibited below 70°C; the faradaic current for methanol oxidation was low, and only small quantities of adsorbed CO and CO₂ were detected with infrared spectroscopy between 0.2–0.8 V (vs. RHE). At 80°C, strong infrared bands from CO₂ and adsorbed, atop coordinated CO were observed over the potential ranges of 0.4–0.8 V and 0.2–0.8 V, respectively. The infrared measurements are consistent with the observation that bulk, high Ru content alloy electrodes appear passivated toward methanol oxidation below 70°C. On the low Ru content alloy studied (X_Ru≈0.1), the methanol surface chemistry was similar to that of pure, polycrystalline Pt, but the electrode was more poison resistant than Pt. For both alloys, the persistence of strong adsorbed CO bands and rapid CO₂ production between 0.4–0.8 V suggests CO functions as a reactive species with high steady-state coverages at these potentials.     

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO₂ reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti₃C₂T_x MXene-regulated Ag−ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag−ZnO/Ti₃C₂T_x catalyst achieves an outstanding CO₂ conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm⁻² at −0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag−ZnO interfaces contributes the high selectivity of CO. The CO₂ conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO₂ reduction.     

In situ transmission difference FTIR spectroscopic investigation on anodic oxidation of methanol in aqueous solution

In situ transmission difference FTIR spectroscopy method was introduced for studying the anodic oxidation of methanol in acid aqueous solution. A minigrid Pt optically transparent thin layer electrode was used as working electrode. This method has the ability to clarify the identity of species involved in the oxidation process both in solution and adsorbed at the surface of electrode. From the results of in situ transmission difference FTIR spectroscopy measurement it was found that HCHO, HCOOH, HCOOCH₃ and CH₂(OCH₃)₂ could be formed in the oxidation process of methanol. The final product was CO₂. The adsorbed poisonous intermediate CO was detected. It was formed at near 0.6 V and became significant at 0.9 V, where the oxidation current was inhibited. The in situ transmission difference FTIR spectroscopy method is a very convenient, relative simplicity and efficient method for investigating the electrochemical process, and could be as a good candidate for further application.