High-performance liquid chromatographic analysis of the anticancer drug oxantrazole in rat whole blood and tissues.

A reversed-phase high-performance liquid chromatographic (HPLC) assay was developed for the antitumor anthrapyrazole analogue, oxantrazole (OX), in rat whole blood and tissues. Blood samples were mixed with equal volumes of a 25% (w/v) aqueous solution of L-ascorbic acid, whereas tissue samples were homogenized with 1.5-3 volumes of an L-ascorbic acid-methanol-water (1:10:1, w/v/v) mixture to prevent oxidative degradation of OX. Samples were then treated with 60% (v/v) perchloric acid (25-30 microliters/ml of stabilized sample) to precipitate proteins, and centrifuged, with the resultant supernatants analyzed on HPLC utilizing a C8 column. The mobile phase for blood and urine samples consisted of 8% (v/v) glacial acetic acid, 13% (v/v) acetonitrile, 79% (v/v) water, 0.16% (w/v) sodium acetate, and 0.05% (w/v) L-ascorbic acid (final pH 2.7), and was pumped at 1.8 ml/min. Tissue samples were eluted at 2 ml/min with a mobile phase consisting of 8% (v/v) glacial acetic acid, 12% (v/v) acetonitrile, 80% (v/v) water, 0.16% (w/v) sodium acetate, and 0.0;5% (w/v) L-ascorbic acid. OX and internal standard were detected at 514 nm and had retention times of 2.3 and 3.1 min, respectively. The limit of quantitation of OX was 25-50 ng/g. Recovery of OX from biological samples ranged from 50 +/- 0.9% in spleen to 102.8 +/- 1.8% in RG-2 glioma. The analytical method was applied to a pharmacokinetic study in rats.     

Absolute line intensity measurements of hot bands for carbonyl sulfide at 12 microm

Using diode-laser spectroscopy, the intensities of 58 lines of the v(1) + v(1/2) - v(1/2) band and 36 lines of the 2v(1) - v(1) band of OCS have been measured. The corresponding band strengths S(0)(v) and the vibrational transition dipoles micro(v) have been derived through least squares fitting of these individual intensities. The band strengths values have been determined with a precision better than 2.5%.     

Studies on separation of rare earth elements on various types of anion-exchangers in the C3H7OH-7 M HNO3 systems

This paper presents the possibilities of separation of yttrium(III)-neodymium(III) and samarium(III)-neodymium(III) pairs by frontal analysis on strongly basic anion-exchangers Wofatit SBW, Wofatit SBK and Lewatit MP 5080 in the systems: 90% (v/v) 2-propanol-10% (v/v) 7 M HNO3 and 90% (v/v) 1-propanol-10% (v/v) 7 M HNO3. The best results are obtained on Lewatit MP 5080 in the 90% (v/v) 2-propanol-10% (v/v) 7 M HNO3 system. In this system, on 1 dm3 of this anion-exchanger, 1.95 kg yttrium(III) and 0.3 kg samarium(III) were purified decreasing the microcomponent content to below 10(-3)%.     

Distribution of internal states of CO from O (1D) + CO determined with time-resolved fourier transform spectroscopy

Following collisions of O (1D) with CO, rotationally resolved emission spectra of CO (1 < or = v < or = 6) in the spectral region 1800-2350 cm(-1) were detected with a step-scan Fourier transform spectrometer. O (1D) was produced by photolysis of O3 with light from a KrF excimer laser at 248 nm. Upon irradiation of a flowing mixture of O3 (0.016 Torr) and CO (0.058 Torr), emission of CO (v < or = 6) increases with time, reaches a maximum approximately 10 micros. At the earliest applicable period (2-3 micros), the rotational distribution of CO is not Boltzmann; it may be approximately described with a bimodal distribution corresponding to temperatures approximately 8000 and approximately 500 K, with the proportion of these two components varying with the vibrational level. A short extrapolation from data in the period 2-6 micros leads to a nascent rotational temperature of approximately 10170 +/- 600 K for v = 1 and approximately 1400 +/- 40 K for v = 6, with an average rotational energy of 33 +/- 6 kJ mol(-1). Absorption by CO (v = 0) in the system interfered with population of low J levels of CO (v = 1). The observed vibrational distribution of (v = 2):(v = 3):(v = 4):(v = 5):(v = 6) = 1.00:0.64:0.51:0.32:0.16 corresponds to a vibrational temperature of 6850 +/- 750 K. An average vibrational energy of 40 +/- 4 kJ mol(-1) is derived based on the observed population of CO (2 < or = v < or = 6) and estimates of the population of CO (v = 0, 1, and 7) by extrapolation. The observed rotational distributions of CO (1 < or = v < or = 3) are consistent with results of previous experiments and trajectory calculations; data for CO (4 < or = v < or = 6) are new.     

Development of a perfusion reversed-phase HPLC method for the separation of soybean and cereal (wheat, corn, and rice) proteins in binary mixtures. Application to the detection of soybean proteins in commercial bakery products

A perfusion reversed-phase HPLC method enabling the simultaneous separation of soybean and cereal (wheat, corn, and rice) proteins in commercial bakery products has been proposed for the first time. The method utilises an acetonitrile-water gradient containing an ion-pairing agent. Different ion-pairing agents were tried, 0.3% (v/v) acetic acid being observed to enable the separation of soybean from wheat, rice, and corn proteins while with 0.1% (v/v) trifluoroacetic acid only the separation of soybean and corn proteins was possible. Optimisation of the solubilisation conditions for proteins was achieved by testing different acetonitrile concentrations for the simultaneous extraction of soybean and cereal proteins: best recoveries were found with 25% (v/v) acetonitrile + 0.3% (v/v) acetic acid and with 40% (v/v) acetonitrile + 0.1% (v/v) trifluoroacetic acid. Chromatographic conditions such as gradient, temperature, and wavelength detection were also optimised. The method enabled the separation of soybean and cereal proteins in binary mixtures (soybean and wheat, soybean and corn, or soybean and rice proteins) in less than 5 minutes in a total analysis time of 20 min.     

Effect of surfactant on retention behaviors of polystyrene latex particles in sedimentation field-flow fractionation: effective boundary slip model approach

A retention theory in sedimentation field-flow fractionation (SdFFF) was developed by exploiting the effective slip boundary condition (BC) that allows a finite velocity for particles to have at the wall, thereby alleviating the limitations set by the no-slip BC constraint bound to the standard retention theory (SRT). This led to an expression for the retention ratio R as R = (R(o) + v*(b))/(R(o) + v*(b)), where R(o) is the sterically corrected SRT retention ratio and v*(b) is the reduced boundary velocity. Then, v*(b) was modeled as v*(b) = v*(b,o)/[1 + (7K*S(o))(1/2)], where S(o) is the surfactant (FL-70) concentration and K* is the distribution coefficient associated with the langmuirian isotherm of the apparent effective mass against S(o). We applied this to study the surfactant effect on the retention behaviors of polystyrene (PS) latex beads of 170-500 nm in diameter. As a result, an empirical relation was found to hold between v*(b,o) and d(o) (estimated from R(o) at S(o) = 0) as v*(b,o) - v*(o,o)[1 - (d(c)/d(o))], where v*(o,o) is the asymptotic value of v*(b,o) in the vanishing d(c)/d(o) limit and d(c) is the cutoff value at which v*(b,o) would vanish. According to the present approach, the no-slip BC (v*(b,o) = 0) was predicted to recover when d(o) ～ d(c), and the boundary slip effect could be significant for S(o) ≤ 0.05%, particularly for large latex beads.     

Large-scale isolation of flavan-3-ol phloroglucinol adducts by high-speed counter-current chromatography

Flavan-3-ol phloroglucinol adducts were synthesised through acid catalysed degradation of a procyanidins-rich grape seed extract in the presence of phloroglucinol. The reaction mixture (3.3 g) was fractionated without further sample preparation using the all-liquid chromatographic technique of high-speed counter-current chromatography (HSCCC). Selected solvent systems were hexane-ethyl acetate-methanol-water (0.1:5:0.1:5, v/v/v/v) and (1.5:10:1.5:10, v/v/v/v). The fractions obtained were found to contain almost pure compounds, in some cases final purification was achieved by preparative HPLC. The so-obtained pure standards of (+)catechin-(4alpha-->2)-phloroglucinol, (-)epicatechin-(4beta-->2)-phloroglucinol, (+)catechine, (-)epicatechin-3-O-galloyl-(4beta-->2)-phloroglucinol, (-)epicatechin, and (-)epicatechin gallate are required for quantification of acid-catalysed phloroglucinol degradation products of procyanidins.     

Mixture design optimization of extraction and mobile phase media for fingerprint analysis of Bauhinia variegata L

Two statistical mixture designs were used to optimize the proportions of solvents used in both the extraction medium and the reversed liquid chromatographic mobile phase to improve the quality of chromatographic fingerprints of Bauhinia variegata L extracts. For modeling, the number of peaks was used as a measure of fingerprint information. Three mobile phases, each with a chromatographic strength of two, gave good results. A methanol/water (77:23 v/v) mixture resulted in 17 peaks in the chromatographic fingerprint whereas acetonitrile/water (64.5:35.5 v/v) and methanol/acetonitrile/water (35:35:30 v/v/v) mixtures resulted in 18 and 20 peaks, respectively. The corresponding optimum solvent compositions to extract chemical substances for these three mobile phases were ethanol/acetone (25:75 v/v/v) and dichloromethane/acetone (70:30 v/v) mixtures, and pure dichloromethane, respectively. The mixture designs are useful for understanding the influence of different solvents on the strengths of the extraction medium and the mobile phase.     

Preparative isolation of huperzines A and B from Huperzia serrata by displacement centrifugal partition chromatography

The pH-zone refining centrifugal partition chromatography technique was used to separate the two acetylcholinesterase inhibitors huperzines A and B from a crude alkaloid extract of the club moss Huperzia serrata. Complete co-elution of huperzines A and B was initially observed with the well-known methyl tert-butyl ether-acetonitrile-water (4:1:5, v/v/v) solvent system with triethylamine (8mM) as the displacer and methane sulfonic acid (6mM) as the retainer. An efficient biphasic system was designed on the basis of solvent association that provided selectivity in the elution mode: n-heptane/ethyl acetate/n-propanol/water (5:15:35:45, v/v/v/v). Lowering the bridge solvent content (n-propanol) of this system increased the polarity difference between the two phases thus adapting it to the pH-zone refining mode. Thus, the purification of these compounds was achieved using the biphasic system n-heptane/ethyl acetate/n-propanol/water (10:30:15:45, v/v/v/v) with triethylamine (8mM) as the displacer and methane sulfonic acid (6mM) as the retainer.     

Communication: Experimental and theoretical investigations of the effects of the reactant bending excitations in the F + CHD3 reaction

The effects of the reactant bending excitations in the F+CHD(3) reaction are investigated by crossed molecular beam experiments and quasiclassical trajectory (QCT) calculations using a high-quality ab initio potential energy surface. The collision energy (E(c)) dependence of the cross sections of the F+CHD(3)(v(b)=0,1) reactions for the correlated product pairs HF(v('))+CD(3)(v(2)=0,1) and DF(v('))+CHD(2)(v(4)=0,1) is obtained. Both experiment and theory show that the bending excitation activates the reaction at low E(c) and begins to inactivate at higher E(c). The experimental F+CHD(3)(v(b)=1) excitation functions display surprising peak features, especially for the HF(v(')=3)+CD(3)(v(2)=0,1) channels, indicating reactive resonances (quantum effects), which cannot be captured by quasiclassical calculations. The reactant state-specific QCT calculations predict that the v(5)(e) bending mode excitation is the most efficient to drive the reaction and the v(6)(e) and v(5)(e) modes enhance the DF and HF channels, respectively.     

Direct measurement of part-per-billion levels of dimethyl sulfoxide in water by gas chromatography with stacked injection and chemiluminescence detection

Dimethyl sulfoxide (DMSO) is a chemical of industrial significance with many important applications. DMSO is used as an industrial solvent, in drug delivery and healthcare applications, among others. Analysis of DMSO in water typically involves extensive sample preparation, enrichment, and derivatization to improve solute detectability. A novel gas chromatographic procedure has been developed for the direct measurement of trace levels of DMSO in an aqueous matrix, such as potable water. The technology utilizes stacked injection techniques for in-column solute enrichment, a precolumn to enhance solute focusing effects, and sulfur chemiluminescence detection for matrix suppression and sensitivity. A detection limit of 2 parts per billion (ppb) (v/v) of DMSO in water was attained. Relative precision of less than 7% at the concentration of 10 ppb (v/v) of DMSO was demonstrated. A correlation coefficient of 0.9988 was obtained over a range of 2 ppb (v/v) to 100 ppb (v/v). No detectable carry-over was found at the 5 ppb (v/v) level whereas less than 4% carry-over was observed at the 100 ppb (v/v) level. Various sample storage media including glass, polyethylene, and polycarbonate were also studied to minimize solute loss. Recoveries greater than 84% were achieved with all storage media tested. The method was found to be reliable and simple to implement.     

Vibrational spectra of CCl4: isotopic components and hot bands. Part I

Room temperature (295 degrees K) infrared spectra of CCl4 have been measured covering the 4000-200 cm(-1) region. Bands ascribable to the isotopic components in the first overtone of the asymmetric deformation (2v4) mode and the combination of the symmetric and the asymmetric deformation (v2 + v4) mode regions are observed in agreement with the percentage distribution of various isotopes. From these observations, the first ever estimate of the isotopic band positions in the regions of the v4 and v2 modes at room temperature are obtained. Successful assignment of the isotopic bands in the asymmetric stretching (v3) and combination of the symmetric stretching and asymmetric deformation (v1 + v4) mode regions has been achieved and realistic values of all the v3/(v1 + v4) mode Fermi resonance parameters are obtained. The experimental results suggest that the transitions, where the initial levels are not the ground state, contribute significantly and give rise to a very complicated vibrational spectrum for CCl4 vapour.     

Separation of caffeoylquinic acids and flavonoids from Asteris souliei by high‐performance counter‐current chromatography and their anti‐inflammatory activity in vitro

Eleven compounds were successfully separated from Asteris souliei by using a two‐step high‐performance counter‐current chromatography method. The first step involved a reversed phase isocratic counter‐current chromatography separation using hexane/ethyl acetate/methanol/water (1:0.8:1:1 v/v/v/v), which produced three fractions, the first two of which were mixtures. The second step used step‐gradient reversed‐phase counter‐current chromatography with hexane/butanol/ethyl acetate/methanol/water (1:0.5:3.5:1:4 v/v/v/v/v) initially followed by hexane/ethyl acetate/methanol/water (1:2:1:2 v/v/v/v) to separate Fraction 1 into seven compounds; and hexane/ethyl acetate/methanol/water (1:1:1:1.2 v/v/v/v) to separate Fraction 2 into three further compounds. The chemical structures of the separated compounds were identified by ESI‐MS and NMR spectroscopy (¹H and ¹³C). Baicalin ( 5 ), eriodictyol ( 7 ), apigenin‐7‐glycoside ( 8 ), quercetin ( 9 ), luteolin ( 10 ), and apigenin ( 11 ) showed obvious inhibitory effects on lipopolysaccharide‐induced nitric oxide production in RAW264.7 cells at a concentration of 10 μg/mL.     

Stability Constants of Some Macrocyclic Complexes of Ag(I) and Cu(II) in Mixed Solvents by Potentiometry

Stability constants of complexes of Ag(I) and Cu(II) perchlorates and nitrates with some macrocyclic compounds in 90 and 75% (v/v) DMSO+water and 75% (v/v) DMF+water media have been determined by potentiometry. Silver and copper wires, and Coated Wire Ion Selective Electrodes (CWISE) were used as indicator electrodes. It was observed that complexation is stronger when the salt is present as a perchlorate than when it is as a nitrate. For both cations the stability constant values in 75% (v/v) DMF+water were somewhat higher than in 75% (v/v) DMSO. The macrocyclic effect due to cyclization of linear amine tosylates has been observed. Competitive potentiometry has been utilized to compare some of the results.     

Specific detection of integrin αvβ3 by light-up bioprobe with aggregation-induced emission characteristics

Specific bioprobes with fluorescence turn-on response are highly desirable for high contrast biosensing and imaging. In this work, we developed a new generation bioprobe by integrating tetraphenylsilole, a fluorogenic unit with aggregation-induced emission (AIE) characteristic, with cyclic arginine-glycine-aspartic acid tripeptide (cRGD), a targeting ligand to integrin α(v)β(3) receptor. Emission of the AIE probe is switched on upon its specific binding to integrin α(v)β(3), which allows quantitative detection of integrin α(v)β(3) in solution and real-time imaging of the binding process between cRGD and integrin α(v)β(3) on cell membrane. The probe can be used for tracking integrin α(v)β(3) and for identifying integrin α(v)β(3)-positive cancer cells.     

Improved thin-layer chromatographic method for the separation of cholesterol,egg phosphatidylcholine,and their degradation products

Degradation products of egg phosphatidylcholine (EPC) and cholesterol were analyzed with different normal- and reversed-phase thin-layer chromatography (TLC) systems. The best separation, in terms of the highest number of degradation products from both analytes, was obtained with a reversed-phase system, using butanol-methanol-water-96-98% (v/v) acetic acid (40 + 40 + 20 + 4, v/v/v/v) as the mobile phase after overnight saturation at 25 degrees C. A special development technique was used. After a first development, the plate was dried and a second development was performed in the same direction. This method enabled us to separate lysophosphatidylcholine, several free fatty acids and hydroperoxides, and several undefined degradation products of EPC and cholesterol. All products were visualized after the plate was dipped in a 1% (v/v) solution of 4-methoxybenzaldehyde in 98% sulfuric acid-96-98% (v/v) acetic acid-ethanol-water (2 + 10 + 60 + 30), presenting a blue color or a white spot against a colored background. After activation at 110 degrees C, a stable color for both analytes was reached after 12 min. Precision of <5% was obtained at 2 levels of analysis. Good linearity was obtained in the range of 5-30 microg for EPC (r = 0.991) and 5-40 microg for cholesterol (r = 0.991). These results show that TLC can be an inexpensive and easy alternative for the analysis of EPC and cholesterol.     

Separation of gallic acid from Cornus officinalis Sieb. et Zucc by high-speed counter-current chromatography

Gallic acid was separated from a n-butanol extract of the fruit of Cornus officinalis Sieb. et Zucc by high-speed countercurrent chromatography in two steps using two solvent systems composed of ethyl-acetate-ethanol n-butanol-water (5:1.8:6, v/v/v) and ethyl acetate-ethanol-water (5:0.5:6, v/v/v) successively. From 1 g of n-butanol extract the method produced 60 mg of gallic acid at a purity of 97%.     

Densitometric thin-layer chromatographic determination of artemisinin and its lipophilic derivatives,artemether and arteether

A thin-layer chromatograpy (TLC) method is developed to analyze artemisinin (AT) and its derivatives, artemether (AM) and arteether (AE), using a silica-gel plate with a mobile phase containing pure chloroform. After development, all products are visualized after dipping in a 4-methoxybenzaldehyde dipping reagent of 1% (v/v) in an acidic solution of sulphuric acid (98%, v/v) and acetic acid (96-98%, v/v) (respectively, 2% and 10%, v/v in alcohol-water, 60:30, v/v), presenting a purple color against a slightly colored background. This TLC system is quantitatively evaluated in terms of stability of the color, precision, accuracy, and calibration. Activation is performed at 110 degrees C. Stability of the color of both analytes is reached after 12 min. Precision, less than 5%, is obtained at two levels. Good linearity is obtained in the range of 0.5-8 micro g for all analytes. Some applications show its utility in the quality control of capsules. The prederivatization technique, applying the described dipping reagent before development, reveals the presence of various reaction products, possibly isomers. These results prove that TLC can be a cheap and easy alternative for the analysis of AT and its lipophilic derivatives, AM and AE, as pure powder and in pharmaceutical-dosage forms.     

Flow injection near-infrared determination of ethanol in chloroform

A simple and direct flow injection (FIA) procedure has been developed for the determination of the stabilizing agent ethanol in chloroform samples. The procedure is based on the use of the absorbance band of ethanol in the near-infrared (NIR) region at 2272 nm, measured in front of a reference sample of chloroform stabilized with amylene. The method developed provides a limit of detection of 0.0045% (v/v) and a dynamic range until 10% (v/v) with a typical variation coefficient of 0.4% for six independent analysis of a real sample containing approximately 1% (v/v) of ethanol. The sample injection frequency allowed by the method is 78 h^–1.     

CH2BrCl在265 nm光解产生的氯甲基自由基的振动内能

利用离子速度影像技术研究了CH2BrCl在265nm附近的激光光解.利用2+1共振增强多光子电离分别获得光解产物Br(2P1/2)和Br(2P3/2)的离子速度图像,从而得出Br(2P1/2)和Br(2P3/2)的速度分布,以及光解碎片的总平动能分布.据此,运用角动量守恒碰撞模型获得了解离氯甲基自由基(·CH2Cl)的振动内能分布.研究结果表明:CH2BrCl+hv→Br(2P1/2)+CH2Cl通道产生的氯甲基自由基中被激发的振动模主要是v4、v3+v4、v2+v4和v2+v6;CH2BrCl+hv→Br(2P3/2)+CH2Cl通道产生的氯甲基自由基中被激发的振动模主要是v2+v6、v1+v3、v2+v5、v2+v3+v5和v1+v5;母体分子CH2BrCl在吸收光解光子后除有v5(CBrstretch)振动模被激发外,还有v7(CH2a-stretch)等其它振动模也被激发.