Synthesis and characterization of liquid crystalline polysiloxanes containing benzyl ether mesogens

Side chain liquid crystalline polysiloxanes were synthesized by the hydrosilation of poly(methylhydrosiloxane) with p-(1-undecenyl-11-oxy) benzyl ethers of 4-cyanophenol (IM), 4-methoxyphenol (IIM), 4-cyano-4′-hydroxybiphenyl (IIIM), 4-methoxy-4′-hydroxybiphenyl (IVM), and 2-cyano-6-hydroxynaphthalene (VM). The phase behavior of both monomeric and polymeric liquid crystals was characterized by differential scanning calorimetry and optical polarization microscopy. IM is a monotropic liquid crystal, IIM is crystalline, and IIIM and IVM are enantiotropic liquid crystals, whereas VM presents two virtual liquid crystalline transitions and crystalline polymorphism. All the synthesized polysiloxanes present enantiotropic smectic mesomorphism.     

Synthesis and characterization of liquid crystalline copolymethacrylates,copolyacrylates, and copolysiloxanes containing 4-methoxy-4′-hydroxy-α-methylstilbene and 4-hydroxy-4′-methoxy-α-methylstilbene constitutional isomers as side-groups

The synthesis of methacrylates and acrylates containing 4-methoxy-4′-hydroxy-α-methylstilbene and 4-hydroxy-4′-methoxy-α-methylstilbene constitutional isomers attached to the polymerizable group through flexible spacers containing 11, 8, 6, 3, and respectively 2 methylenic units is described. The radical copolymerization of a 1/2 or 2/1 mole ratio of the two constitutional isomeric monomers led to thermotropic side-chain liquid crystalline polymers in all cases. The synthesis of copolysiloxanes based on the same constitutional isomeric mesogens as side groups, and flexible spacers containing 11, 8, 6, 5, and respectively 3 methylenic units is also described. All polymers were characterized by differential scanning calorimetry and optical polarization microscopy. The polymers containing 11 methylenic units in the spacer exhibit S_c mesomorphism, while the other polymers are nematic. Copolymethacrylates do not undergo side-chain crystallization. Only the copolyacrylate containing 11 methylenic units in the spacer exhibits side-chain crystallization. All the copolysiloxanes display side-chain crystallization. The number of melting transitions seen for these polymers decreases with increasing spacer length. Copolysiloxanes containing dissimilar spacer length were also prepared. Only the copolymer synthesized with highly dissimilar spacer lengths, i.e., containing 3 and 11 methylenic units, does not undergo side-chain crystallization. These results have demonstrated that while the type of mesophase is dictated only by the spacer length, the degree of decoupling of the motion of the side-groups from the motion of the main chain is strongly dependent on the nature of the polymer backbone. For the same mesogenic unit and spacer length, the thermal stability of the mesophase is also dictated by the nature of the polymer backbone. The use of constitutional isomers of mesogenic units as side groups in liquid crystalline polymers provides at least qualitative information on the degree of decoupling of the side groups from the polymer main chain.     

On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Synthesis and characterization of liquid crystalline polyacrylates and polymethacrylates containing benzyl ether and diphenyl ethane based mesogens

The synthesis and radical polymerization of a novel series of acrylates and methacrylates containing p-cyanophenyl-p-hydroxybenzyl ether, p-methoxyphenyl-p-hydroxybenzyl ether, and 1-(p-cyanophenyl)-2-(p-hydroxyphenyl) ethane groups attached to the polymerizable group through aliphatic spacers containing 11 and 6 methylenic units is described. The resulting polymers were characterized by differential scanning calorimetry and optical polarization microscopy. All polymers exhibited enantiotropic mesomorphism. Low molar mass compounds based on benzyl ether or diphenyl ethane units exhibit only monotropic or virtual transitions. This demonstrates that the “polymer effect” stabilizes mesophases obtained from “mesogenic units” which do not contain rigid interconnecting groups.     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly(vinyl ether)s and poly(propenyl ether)s containing mesogenic groups: A new class of side-chain liquid-crystalline polymers

A new series of thermotropic liquid-crystalline polymers, poly(vinyl ether)s and poly(propenyl ether)s, containing the mesogen 4-methoxy-4′-hydroxybiphenyl in the side chain and different spacers between the mesogens and the backbone were synthesized and characterized by DSC and optical microscopy. Their mesomorphic behavior was compared to that of the corresponding polymethacrylates. In general the poly(propenyl ether)s showed lower transition temperatures and larger thermal stability ranges of their mesophases than the respective polymethacrylates, reflecting the effect of substituting the rigid ester bond connecting the spacer to the backbone in polymethacrylates by a more flexible ether bond. Also, poly(propenyl ether)s showed more ordered mesophases than the polymethacrylates, suggesting that a better decoupling of the mesogen and polymer backbone is obtained through the ether linkage.     

Liquid-crystalline polyesters containing alternating alkylene and oxyalkylene spacers

Three new series of thermotropic polyesters were prepared in which the structural units consisted of two p-oxybenzoyl dyads alternately flanked by a polymethylene segment and an oxyethylene oligomer. In each series the length of the oxyethylene residue was fixed (n = 2, 3 or 4) and the length of the alkylene segment was varied (m = 6-10 and 12). Details of the synthesis and characterization of the polymers are reported. The effect of the parity and length of the oxyethylene and polymethylene segments on the incidence of mesophases and on their thermodynamic parameters is stressed. The substitution of methylene groups by oxygen atoms in the polymethylene spacer of a fourth series of polymer analogues completely inhibited the nematogenicity of the polymers incorporating even powerful mesogens such as the p-oxybenzoyl dyads.     

Synthesis and characterization of side-chain liquid crystalline polysiloxanes containing oligooxyethylene spacers and benzyl ether based mesogenic groups

The synthesis of side-chain liquid crystalline polysiloxanes containing oligooxyethylene spacers and 4-methoxyphenyl benzyl ether and 6-cyano-2-naphthyl benzyl ether based mesogenic groups is presented. The phase behavior of both monomeric and polymeric liquid crystals was characterized by differential scanning calorimetry and optical polarized microscopy. All synthesized polysiloxanes present smectic mesomorphism. The insertion of oxygen atoms into the flexible aliphatic spacers leads to decrease in both glass transition and isotropization temperatures of the resulting side-chain liquid crystalline polymers.     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Liquid crystalline copolymers containing electron donor and acceptor mesogens with a chiral group in the spacer unit

Side-chain liquid crystalline polymers containing both mesogenic (carbazolylmethylene)aniline and (4′-nitrobenzylidene)aniline units with various spacer groups were prepared to examine effects of the structure of spacer groups on the liquid crystalline properties. The copolymer containing (R)-(+)-2-methylpropylene as a chiral group in the spacer unit induced a smectic phase; the copolymer with a trimethylene spacer of similar length to the chiral spacer exhibited a nematic phase. Smectic phases were observed for the copolymer containing the chiral spacer group when the proportion of the carbazolyl group was in the range of 0.55–0.88. For example, the copolymer with the proportion of the carbazolyl group of 0.68 expressed the smectic phase from 88° to 167°C. This isotropic temperature was 37° higher than the calculated value (130°C) based on an assumed copolymer composition without the electron donor–acceptor interaction. Thus, it is assumed that for the chiral copolymer containing both electron donor and acceptor groups, the thermal stability and the induction of the smectic phase were caused by both the electron donor–acceptor interaction and the existence of the chiral group in the spacer unit. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of side-chain liquid crystalline polysiloxanes containing 4-alkanyloxyphenyl trans-4-alkylcyclohexanoate side groups

The synthesis and characterization of nine polysiloxanes containing 4-alkanyloxyphenyl trans-4-alkylcyclohexane side groups are described. Six monomers which contain a pentenyloxy of a hexenyloxy flexible spacer display a nematic mesophase, while the other three monomers which contain an undecenyloxy flexible spacer display nematic, smetic A and smectic E mesophases. All synthesized polymers present two smectic mesophases except one containing 4-hexanyloxyphenyl trans-4-n-butylcyclohexanoate side groups presents one smectic mesophase and one containing 4-undecanyloxyphenyl trans-4-n-pentylcyclohexanoate side groups presents three smectic mesophases. Trans-cis isomerization of mesogens and side chain crystallization did not occur for any of the synthesized polymers.     

Structural variations of liquid crystalline polymers with phasmidic-type mesogens

The fixation of phasmidic-type mesogens through spacer groups to polysiloxane backbones provided a method of obtaining liquid crystalline polymers with phasmidic mesogens as side groups. The polymer 6b showed a bilayer structure in the mesophase range. The tendency to form liquid-crystalline phase depends on the number and the length of alkoxy substituents.     

Liquid‐crystalline thermosets from liquid‐crystalline epoxy resins containing bisazomethinebiphenylene mesogens in the central core: Copolymerization with a nonmesomorphic epoxy resin

A new series of liquid‐crystalline epoxy resins was synthesized, and their mesomorphic behavior was investigated with differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray scattering. These glycidylic compounds had central aromatic imine mesogens derived from benzidine and aliphatic spacers of up to 10 methylene units that linked the mesogens to the glycidylic groups. Crosslinking these monomers with primary aromatic diamines led to nematic networks, some of which contained crystal inclusions. However, through curing with tertiary amines as catalytic agents or through copolymerization with different proportions of the nonmesomorphic epoxy monomer and primary amines as crosslinking agents, smectic C organized thermosets were prepared when the spacers had at least four methylene carbons. When they had fewer than four, the networks were nematic. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3631–3643, 2004     

Synthesis and thermal behavior of side-chain liquid crystalline polymethacrylates containing tolane-based mesogenic side groups

The synthesis and characterization of nine polymethacrylates containing 4-alkoxy-4′-trifluoromethyltolane, 4-alkoxy-4′-cyanotolane, and 4-alkoxy-4′-nitrotolane side groups were described in this study. The phase behavior of the prepared monomers and polymers was characterized by differential scanning calorimetry, optical polarizing microscopy, and x-ray diffraction. All of the obtained monomers exhibit no mesophase, while most of the synthesized polymers reveal enantiotropic mesomorphism. The polymethacrylate containing 4-propanyloxy-4′-nitrotolane side groups was the only one which shows no mesomorphic behavior. Both the spacer length and the nature of terminal groups have profound influence on the phase transition temperatures and thermal stability of the mesophase. The polymers with longer spacers tend to form a more ordered mesophase with a wider temperature range. Among three polymers with the same spacer length, the polymer with a trifluoromethyl terminal end group is inclined to form a more ordered mesophase than the other two polymers. No side chain crystallization occurred for all obtained polymers. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of new thermotropic liquid crystalline polymers with paired mesogens containing azobenzene unit: Poly(malonic ester)s

New thermotropic liquid crystalline poly(malonic ester)s with two symmetrical mesogenic units (paired mesogens) were prepared by the polycondensation of 1,6-dibromohexane and novel malonic ester compounds with different flexible ethyleneoxy spacer lengths linked to azobenzene group. All the prepared malonic esters and the resulting polymers exhibited monotropic liquid crystallinity with a nematic texture. The length of the spacer had influence on the temperature of phase transition of them. A possibility of application of the prepared polymers to reversible optical information storage media was also identified through a trans–cis isomerization of azobenzene by UV irradiation.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Photo-triggered assembly/disassembly of macroscopically ordered monodomain lamellar structure in side-chain liquid crystalline polymer containing strong polar azobenzene mesogens

Assembly of ordered structures by an external stimulus allows for design of functional materials with enhanced physical and chemical properties. A new side-chain liquid crystal polymer containing strong polar azobenzene mesogens was synthesised. A macroscopically ordered monodomain smectic-like lamellar structure having orientational order and positional order was immediately assembled by linear polarised light irradiation (473 nm, 20 mW/cm²) at room temperature. The lamellar layer with its periodic d-spacing of 1.9 nm and mesogens arranged at an inclination angle of about 75° were characterised by X-ray diffraction and polarising optical microscopy which showed a diffraction peak at 2θ?=?4.53° and an off-centred interference figure. Reversible assembly and disassembly of the lamellar phase were achieved by alternative irradiation with polarised light and non-polarised light. Potential factors influencing the assembly of the ordered lamellar structure were investigated by controlling the mesogens out-of-plane orientation and by changing the polarities of mesogens. The difference in arrangement of the mesogens between the lamellar phase and a thermotropic smectic phase was also compared by heating the selectively exposed film. The light controllable assembly of mesogens provides an easy route to assemble a lamellar phase in azobenzene containing polymers for application in optical and photonic devices.     

Polyurethanes and polyureas having long methylene chain units

Polyurethanes and polyureas containing long methylene chain units have been prepared from the following six series of monomer combinations; aliphatic diisocyanates with aliphatic glycols or diamines, methylene bis(4-phenyl isocyanate) with aliphatic glycols or diamines, and p-xylylene diisocyanate with aliphatic glycols or diamines. A good linear relationship was noted between the polymer melting points of each series against the concentration of functional groups. Both polyurethanes and polyureas from p-xylylene diisocyanate showed higher melting points than those from methylene bis(4-phenyl isocyanate) with corresponding aliphatic monomers. The relations between the melting points of these polymers with long methylene chains, including polyamides which were previously reported, and the chain components were discussed. The higher melting points of polymers containing p-xylylene group are attributed to the high rigidity of this group.     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.     

High-pressure synthesis and properties of aliphatic–aromatic polyimides via nylon-salt-type monomers derived from aliphatic diamines and benzophenonetetracarboxylic acid

Aliphatic polyimides (P-XBTA) having inherent viscosities of 0.4–1.4 dL/g were readily synthesized by the high-pressure polycondensation of the salt monomers, composed of aliphatic diamines having various methylene chain lengths (X = 4–12) and 3,3′,4,4′-benzophenonetetracarboxylic acid (BTA), under 200–250 MPa at 200–320°C. The salt monomers with odd-numbered methylene units were found to be more susceptible to crosslinking than those containing even-numbered methylene chains. The polyimides having even-numbered methylene units were highly crystalline, whereas those with odd-numbered methylene chains were crosslinked and therefore amorphous with only one exception, i.e., P-11BTA. The thermal behavior of these polymers was also studied. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 39–47, 1998